blob: 421aa20ea6af8f876944083b54f745374a12da4f [file] [log] [blame]
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +09001/*
2Ported to U-Boot by Christian Pellegrin <chri@ascensit.com>
3
4Based on sources from the Linux kernel (pcnet_cs.c, 8390.h) and
5eCOS(if_dp83902a.c, if_dp83902a.h). Both of these 2 wonderful world
6are GPL, so this is, of course, GPL.
7
8==========================================================================
9
10dev/if_dp83902a.c
11
12Ethernet device driver for NS DP83902a ethernet controller
13
14==========================================================================
15####ECOSGPLCOPYRIGHTBEGIN####
16-------------------------------------------
17This file is part of eCos, the Embedded Configurable Operating System.
18Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
19
20eCos is free software; you can redistribute it and/or modify it under
21the terms of the GNU General Public License as published by the Free
22Software Foundation; either version 2 or (at your option) any later version.
23
24eCos is distributed in the hope that it will be useful, but WITHOUT ANY
25WARRANTY; without even the implied warranty of MERCHANTABILITY or
26FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
27for more details.
28
29You should have received a copy of the GNU General Public License along
30with eCos; if not, write to the Free Software Foundation, Inc.,
3159 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
32
33As a special exception, if other files instantiate templates or use macros
34or inline functions from this file, or you compile this file and link it
35with other works to produce a work based on this file, this file does not
36by itself cause the resulting work to be covered by the GNU General Public
37License. However the source code for this file must still be made available
38in accordance with section (3) of the GNU General Public License.
39
40This exception does not invalidate any other reasons why a work based on
41this file might be covered by the GNU General Public License.
42
43Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
44at http://sources.redhat.com/ecos/ecos-license/
45-------------------------------------------
46####ECOSGPLCOPYRIGHTEND####
47####BSDCOPYRIGHTBEGIN####
48
49-------------------------------------------
50
51Portions of this software may have been derived from OpenBSD or other sources,
52and are covered by the appropriate copyright disclaimers included herein.
53
54-------------------------------------------
55
56####BSDCOPYRIGHTEND####
57==========================================================================
58#####DESCRIPTIONBEGIN####
59
60Author(s): gthomas
61Contributors: gthomas, jskov, rsandifo
62Date: 2001-06-13
63Purpose:
64Description:
65
66FIXME: Will fail if pinged with large packets (1520 bytes)
67Add promisc config
68Add SNMP
69
70####DESCRIPTIONEND####
71
72==========================================================================
73*/
74
75#include <common.h>
76#include <command.h>
Alex Kiernan9925f1d2018-04-01 09:22:38 +000077#include <environment.h>
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +090078#include <net.h>
79#include <malloc.h>
Wolfgang Denk4eaf1722011-12-08 22:28:57 +010080#include <linux/compiler.h>
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +090081
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +090082/* forward definition of function used for the uboot interface */
83void uboot_push_packet_len(int len);
84void uboot_push_tx_done(int key, int val);
85
86/* NE2000 base header file */
87#include "ne2000_base.h"
88
89#if defined(CONFIG_DRIVER_AX88796L)
90/* AX88796L support */
91#include "ax88796.h"
92#else
93/* Basic NE2000 chip support */
94#include "ne2000.h"
95#endif
96
97static dp83902a_priv_data_t nic; /* just one instance of the card supported */
98
Bernhard Kaindld0201692011-10-20 10:56:59 +000099/**
100 * This function reads the MAC address from the serial EEPROM,
101 * used if PROM read fails. Does nothing for ax88796 chips (sh boards)
102 */
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900103static bool
Bernhard Kaindld0201692011-10-20 10:56:59 +0000104dp83902a_init(unsigned char *enetaddr)
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900105{
106 dp83902a_priv_data_t *dp = &nic;
107 u8* base;
108#if defined(NE2000_BASIC_INIT)
109 int i;
110#endif
111
112 DEBUG_FUNCTION();
113
114 base = dp->base;
115 if (!base)
116 return false; /* No device found */
117
118 DEBUG_LINE();
119
120#if defined(NE2000_BASIC_INIT)
121 /* AX88796L doesn't need */
122 /* Prepare ESA */
123 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1); /* Select page 1 */
124 /* Use the address from the serial EEPROM */
125 for (i = 0; i < 6; i++)
126 DP_IN(base, DP_P1_PAR0+i, dp->esa[i]);
127 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0); /* Select page 0 */
128
129 printf("NE2000 - %s ESA: %02x:%02x:%02x:%02x:%02x:%02x\n",
130 "eeprom",
131 dp->esa[0],
132 dp->esa[1],
133 dp->esa[2],
134 dp->esa[3],
135 dp->esa[4],
136 dp->esa[5] );
137
Bernhard Kaindld0201692011-10-20 10:56:59 +0000138 memcpy(enetaddr, dp->esa, 6); /* Use MAC from serial EEPROM */
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900139#endif /* NE2000_BASIC_INIT */
140 return true;
141}
142
143static void
144dp83902a_stop(void)
145{
146 dp83902a_priv_data_t *dp = &nic;
147 u8 *base = dp->base;
148
149 DEBUG_FUNCTION();
150
151 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
152 DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
153 DP_OUT(base, DP_IMR, 0x00); /* Disable all interrupts */
154
155 dp->running = false;
156}
157
158/*
159 * This function is called to "start up" the interface. It may be called
160 * multiple times, even when the hardware is already running. It will be
161 * called whenever something "hardware oriented" changes and should leave
162 * the hardware ready to send/receive packets.
163 */
164static void
165dp83902a_start(u8 * enaddr)
166{
167 dp83902a_priv_data_t *dp = &nic;
168 u8 *base = dp->base;
169 int i;
170
Bernhard Kaindld0201692011-10-20 10:56:59 +0000171 debug("The MAC is %pM\n", enaddr);
172
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900173 DEBUG_FUNCTION();
174
175 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_STOP); /* Brutal */
176 DP_OUT(base, DP_DCR, DP_DCR_INIT);
177 DP_OUT(base, DP_RBCH, 0); /* Remote byte count */
178 DP_OUT(base, DP_RBCL, 0);
179 DP_OUT(base, DP_RCR, DP_RCR_MON); /* Accept no packets */
180 DP_OUT(base, DP_TCR, DP_TCR_LOCAL); /* Transmitter [virtually] off */
181 DP_OUT(base, DP_TPSR, dp->tx_buf1); /* Transmitter start page */
182 dp->tx1 = dp->tx2 = 0;
183 dp->tx_next = dp->tx_buf1;
184 dp->tx_started = false;
185 dp->running = true;
186 DP_OUT(base, DP_PSTART, dp->rx_buf_start); /* Receive ring start page */
187 DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1); /* Receive ring boundary */
188 DP_OUT(base, DP_PSTOP, dp->rx_buf_end); /* Receive ring end page */
189 dp->rx_next = dp->rx_buf_start - 1;
190 dp->running = true;
191 DP_OUT(base, DP_ISR, 0xFF); /* Clear any pending interrupts */
192 DP_OUT(base, DP_IMR, DP_IMR_All); /* Enable all interrupts */
193 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE1 | DP_CR_STOP); /* Select page 1 */
194 DP_OUT(base, DP_P1_CURP, dp->rx_buf_start); /* Current page - next free page for Rx */
195 dp->running = true;
196 for (i = 0; i < ETHER_ADDR_LEN; i++) {
197 /* FIXME */
198 /*((vu_short*)( base + ((DP_P1_PAR0 + i) * 2) +
199 * 0x1400)) = enaddr[i];*/
200 DP_OUT(base, DP_P1_PAR0+i, enaddr[i]);
201 }
202 /* Enable and start device */
203 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
204 DP_OUT(base, DP_TCR, DP_TCR_NORMAL); /* Normal transmit operations */
205 DP_OUT(base, DP_RCR, DP_RCR_AB); /* Accept broadcast, no errors, no multicast */
206 dp->running = true;
207}
208
209/*
210 * This routine is called to start the transmitter. It is split out from the
211 * data handling routine so it may be called either when data becomes first
212 * available or when an Tx interrupt occurs
213 */
214
215static void
216dp83902a_start_xmit(int start_page, int len)
217{
218 dp83902a_priv_data_t *dp = (dp83902a_priv_data_t *) &nic;
219 u8 *base = dp->base;
220
221 DEBUG_FUNCTION();
222
223#if DEBUG & 1
224 printf("Tx pkt %d len %d\n", start_page, len);
225 if (dp->tx_started)
226 printf("TX already started?!?\n");
227#endif
228
229 DP_OUT(base, DP_ISR, (DP_ISR_TxP | DP_ISR_TxE));
230 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
231 DP_OUT(base, DP_TBCL, len & 0xFF);
232 DP_OUT(base, DP_TBCH, len >> 8);
233 DP_OUT(base, DP_TPSR, start_page);
234 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
235
236 dp->tx_started = true;
237}
238
239/*
240 * This routine is called to send data to the hardware. It is known a-priori
241 * that there is free buffer space (dp->tx_next).
242 */
243static void
244dp83902a_send(u8 *data, int total_len, u32 key)
245{
246 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
247 u8 *base = dp->base;
248 int len, start_page, pkt_len, i, isr;
249#if DEBUG & 4
250 int dx;
251#endif
252
253 DEBUG_FUNCTION();
254
255 len = pkt_len = total_len;
256 if (pkt_len < IEEE_8023_MIN_FRAME)
257 pkt_len = IEEE_8023_MIN_FRAME;
258
259 start_page = dp->tx_next;
260 if (dp->tx_next == dp->tx_buf1) {
261 dp->tx1 = start_page;
262 dp->tx1_len = pkt_len;
263 dp->tx1_key = key;
264 dp->tx_next = dp->tx_buf2;
265 } else {
266 dp->tx2 = start_page;
267 dp->tx2_len = pkt_len;
268 dp->tx2_key = key;
269 dp->tx_next = dp->tx_buf1;
270 }
271
272#if DEBUG & 5
273 printf("TX prep page %d len %d\n", start_page, pkt_len);
274#endif
275
276 DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
277 {
278 /*
279 * Dummy read. The manual sez something slightly different,
280 * but the code is extended a bit to do what Hitachi's monitor
281 * does (i.e., also read data).
282 */
283
Wolfgang Denk4eaf1722011-12-08 22:28:57 +0100284 __maybe_unused u16 tmp;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900285 int len = 1;
286
287 DP_OUT(base, DP_RSAL, 0x100 - len);
288 DP_OUT(base, DP_RSAH, (start_page - 1) & 0xff);
289 DP_OUT(base, DP_RBCL, len);
290 DP_OUT(base, DP_RBCH, 0);
291 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_RDMA | DP_CR_START);
292 DP_IN_DATA(dp->data, tmp);
293 }
294
295#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
296 /*
297 * Stall for a bit before continuing to work around random data
298 * corruption problems on some platforms.
299 */
300 CYGACC_CALL_IF_DELAY_US(1);
301#endif
302
303 /* Send data to device buffer(s) */
304 DP_OUT(base, DP_RSAL, 0);
305 DP_OUT(base, DP_RSAH, start_page);
306 DP_OUT(base, DP_RBCL, pkt_len & 0xFF);
307 DP_OUT(base, DP_RBCH, pkt_len >> 8);
308 DP_OUT(base, DP_CR, DP_CR_WDMA | DP_CR_START);
309
310 /* Put data into buffer */
311#if DEBUG & 4
312 printf(" sg buf %08lx len %08x\n ", (u32)data, len);
313 dx = 0;
314#endif
315 while (len > 0) {
316#if DEBUG & 4
317 printf(" %02x", *data);
318 if (0 == (++dx % 16)) printf("\n ");
319#endif
320
321 DP_OUT_DATA(dp->data, *data++);
322 len--;
323 }
324#if DEBUG & 4
325 printf("\n");
326#endif
327 if (total_len < pkt_len) {
328#if DEBUG & 4
329 printf(" + %d bytes of padding\n", pkt_len - total_len);
330#endif
331 /* Padding to 802.3 length was required */
332 for (i = total_len; i < pkt_len;) {
333 i++;
334 DP_OUT_DATA(dp->data, 0);
335 }
336 }
337
338#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_TX_DMA
339 /*
340 * After last data write, delay for a bit before accessing the
341 * device again, or we may get random data corruption in the last
342 * datum (on some platforms).
343 */
344 CYGACC_CALL_IF_DELAY_US(1);
345#endif
346
347 /* Wait for DMA to complete */
348 do {
349 DP_IN(base, DP_ISR, isr);
350 } while ((isr & DP_ISR_RDC) == 0);
351
352 /* Then disable DMA */
353 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
354
355 /* Start transmit if not already going */
356 if (!dp->tx_started) {
357 if (start_page == dp->tx1) {
358 dp->tx_int = 1; /* Expecting interrupt from BUF1 */
359 } else {
360 dp->tx_int = 2; /* Expecting interrupt from BUF2 */
361 }
362 dp83902a_start_xmit(start_page, pkt_len);
363 }
364}
365
366/*
367 * This function is called when a packet has been received. It's job is
368 * to prepare to unload the packet from the hardware. Once the length of
369 * the packet is known, the upper layer of the driver can be told. When
370 * the upper layer is ready to unload the packet, the internal function
371 * 'dp83902a_recv' will be called to actually fetch it from the hardware.
372 */
373static void
374dp83902a_RxEvent(void)
375{
376 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
377 u8 *base = dp->base;
Wolfgang Denk4eaf1722011-12-08 22:28:57 +0100378 __maybe_unused u8 rsr;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900379 u8 rcv_hdr[4];
380 int i, len, pkt, cur;
381
382 DEBUG_FUNCTION();
383
384 DP_IN(base, DP_RSR, rsr);
385 while (true) {
386 /* Read incoming packet header */
387 DP_OUT(base, DP_CR, DP_CR_PAGE1 | DP_CR_NODMA | DP_CR_START);
388 DP_IN(base, DP_P1_CURP, cur);
389 DP_OUT(base, DP_P1_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
390 DP_IN(base, DP_BNDRY, pkt);
391
392 pkt += 1;
393 if (pkt == dp->rx_buf_end)
394 pkt = dp->rx_buf_start;
395
396 if (pkt == cur) {
397 break;
398 }
399 DP_OUT(base, DP_RBCL, sizeof(rcv_hdr));
400 DP_OUT(base, DP_RBCH, 0);
401 DP_OUT(base, DP_RSAL, 0);
402 DP_OUT(base, DP_RSAH, pkt);
403 if (dp->rx_next == pkt) {
404 if (cur == dp->rx_buf_start)
405 DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
406 else
407 DP_OUT(base, DP_BNDRY, cur - 1); /* Update pointer */
408 return;
409 }
410 dp->rx_next = pkt;
411 DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
412 DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
413#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
414 CYGACC_CALL_IF_DELAY_US(10);
415#endif
416
417 /* read header (get data size)*/
418 for (i = 0; i < sizeof(rcv_hdr);) {
419 DP_IN_DATA(dp->data, rcv_hdr[i++]);
420 }
421
422#if DEBUG & 5
423 printf("rx hdr %02x %02x %02x %02x\n",
424 rcv_hdr[0], rcv_hdr[1], rcv_hdr[2], rcv_hdr[3]);
425#endif
426 len = ((rcv_hdr[3] << 8) | rcv_hdr[2]) - sizeof(rcv_hdr);
427
428 /* data read */
429 uboot_push_packet_len(len);
430
431 if (rcv_hdr[1] == dp->rx_buf_start)
432 DP_OUT(base, DP_BNDRY, dp->rx_buf_end - 1);
433 else
434 DP_OUT(base, DP_BNDRY, rcv_hdr[1] - 1); /* Update pointer */
435 }
436}
437
438/*
439 * This function is called as a result of the "eth_drv_recv()" call above.
440 * It's job is to actually fetch data for a packet from the hardware once
441 * memory buffers have been allocated for the packet. Note that the buffers
442 * may come in pieces, using a scatter-gather list. This allows for more
443 * efficient processing in the upper layers of the stack.
444 */
445static void
446dp83902a_recv(u8 *data, int len)
447{
448 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
449 u8 *base = dp->base;
450 int i, mlen;
451 u8 saved_char = 0;
452 bool saved;
453#if DEBUG & 4
454 int dx;
455#endif
456
457 DEBUG_FUNCTION();
458
459#if DEBUG & 5
460 printf("Rx packet %d length %d\n", dp->rx_next, len);
461#endif
462
463 /* Read incoming packet data */
464 DP_OUT(base, DP_CR, DP_CR_PAGE0 | DP_CR_NODMA | DP_CR_START);
465 DP_OUT(base, DP_RBCL, len & 0xFF);
466 DP_OUT(base, DP_RBCH, len >> 8);
467 DP_OUT(base, DP_RSAL, 4); /* Past header */
468 DP_OUT(base, DP_RSAH, dp->rx_next);
469 DP_OUT(base, DP_ISR, DP_ISR_RDC); /* Clear end of DMA */
470 DP_OUT(base, DP_CR, DP_CR_RDMA | DP_CR_START);
471#ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA
472 CYGACC_CALL_IF_DELAY_US(10);
473#endif
474
475 saved = false;
476 for (i = 0; i < 1; i++) {
477 if (data) {
478 mlen = len;
479#if DEBUG & 4
480 printf(" sg buf %08lx len %08x \n", (u32) data, mlen);
481 dx = 0;
482#endif
483 while (0 < mlen) {
484 /* Saved byte from previous loop? */
485 if (saved) {
486 *data++ = saved_char;
487 mlen--;
488 saved = false;
489 continue;
490 }
491
492 {
493 u8 tmp;
494 DP_IN_DATA(dp->data, tmp);
495#if DEBUG & 4
496 printf(" %02x", tmp);
497 if (0 == (++dx % 16)) printf("\n ");
498#endif
Masahiro Yamada51855e82017-06-13 15:17:28 +0900499 *data++ = tmp;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900500 mlen--;
501 }
502 }
503#if DEBUG & 4
504 printf("\n");
505#endif
506 }
507 }
508}
509
510static void
511dp83902a_TxEvent(void)
512{
513 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
514 u8 *base = dp->base;
Wolfgang Denk4eaf1722011-12-08 22:28:57 +0100515 __maybe_unused u8 tsr;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900516 u32 key;
517
518 DEBUG_FUNCTION();
519
520 DP_IN(base, DP_TSR, tsr);
521 if (dp->tx_int == 1) {
522 key = dp->tx1_key;
523 dp->tx1 = 0;
524 } else {
525 key = dp->tx2_key;
526 dp->tx2 = 0;
527 }
528 /* Start next packet if one is ready */
529 dp->tx_started = false;
530 if (dp->tx1) {
531 dp83902a_start_xmit(dp->tx1, dp->tx1_len);
532 dp->tx_int = 1;
533 } else if (dp->tx2) {
534 dp83902a_start_xmit(dp->tx2, dp->tx2_len);
535 dp->tx_int = 2;
536 } else {
537 dp->tx_int = 0;
538 }
539 /* Tell higher level we sent this packet */
540 uboot_push_tx_done(key, 0);
541}
542
543/*
544 * Read the tally counters to clear them. Called in response to a CNT
545 * interrupt.
546 */
547static void
548dp83902a_ClearCounters(void)
549{
550 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
551 u8 *base = dp->base;
Wolfgang Denk4eaf1722011-12-08 22:28:57 +0100552 __maybe_unused u8 cnt1, cnt2, cnt3;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900553
554 DP_IN(base, DP_FER, cnt1);
555 DP_IN(base, DP_CER, cnt2);
556 DP_IN(base, DP_MISSED, cnt3);
557 DP_OUT(base, DP_ISR, DP_ISR_CNT);
558}
559
560/*
561 * Deal with an overflow condition. This code follows the procedure set
562 * out in section 7.0 of the datasheet.
563 */
564static void
565dp83902a_Overflow(void)
566{
567 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *)&nic;
568 u8 *base = dp->base;
569 u8 isr;
570
571 /* Issue a stop command and wait 1.6ms for it to complete. */
572 DP_OUT(base, DP_CR, DP_CR_STOP | DP_CR_NODMA);
573 CYGACC_CALL_IF_DELAY_US(1600);
574
575 /* Clear the remote byte counter registers. */
576 DP_OUT(base, DP_RBCL, 0);
577 DP_OUT(base, DP_RBCH, 0);
578
579 /* Enter loopback mode while we clear the buffer. */
580 DP_OUT(base, DP_TCR, DP_TCR_LOCAL);
581 DP_OUT(base, DP_CR, DP_CR_START | DP_CR_NODMA);
582
583 /*
584 * Read in as many packets as we can and acknowledge any and receive
585 * interrupts. Since the buffer has overflowed, a receive event of
Vagrant Cascadianeae4b2b2016-04-30 19:18:00 -0700586 * some kind will have occurred.
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900587 */
588 dp83902a_RxEvent();
589 DP_OUT(base, DP_ISR, DP_ISR_RxP|DP_ISR_RxE);
590
591 /* Clear the overflow condition and leave loopback mode. */
592 DP_OUT(base, DP_ISR, DP_ISR_OFLW);
593 DP_OUT(base, DP_TCR, DP_TCR_NORMAL);
594
595 /*
Vagrant Cascadianeae4b2b2016-04-30 19:18:00 -0700596 * If a transmit command was issued, but no transmit event has occurred,
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900597 * restart it here.
598 */
599 DP_IN(base, DP_ISR, isr);
600 if (dp->tx_started && !(isr & (DP_ISR_TxP|DP_ISR_TxE))) {
601 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_TXPKT | DP_CR_START);
602 }
603}
604
605static void
606dp83902a_poll(void)
607{
608 struct dp83902a_priv_data *dp = (struct dp83902a_priv_data *) &nic;
609 u8 *base = dp->base;
610 u8 isr;
611
612 DP_OUT(base, DP_CR, DP_CR_NODMA | DP_CR_PAGE0 | DP_CR_START);
613 DP_IN(base, DP_ISR, isr);
614 while (0 != isr) {
615 /*
616 * The CNT interrupt triggers when the MSB of one of the error
617 * counters is set. We don't much care about these counters, but
618 * we should read their values to reset them.
619 */
620 if (isr & DP_ISR_CNT) {
621 dp83902a_ClearCounters();
622 }
623 /*
624 * Check for overflow. It's a special case, since there's a
625 * particular procedure that must be followed to get back into
626 * a running state.a
627 */
628 if (isr & DP_ISR_OFLW) {
629 dp83902a_Overflow();
630 } else {
631 /*
632 * Other kinds of interrupts can be acknowledged simply by
633 * clearing the relevant bits of the ISR. Do that now, then
634 * handle the interrupts we care about.
635 */
636 DP_OUT(base, DP_ISR, isr); /* Clear set bits */
637 if (!dp->running) break; /* Is this necessary? */
638 /*
639 * Check for tx_started on TX event since these may happen
640 * spuriously it seems.
641 */
642 if (isr & (DP_ISR_TxP|DP_ISR_TxE) && dp->tx_started) {
643 dp83902a_TxEvent();
644 }
645 if (isr & (DP_ISR_RxP|DP_ISR_RxE)) {
646 dp83902a_RxEvent();
647 }
648 }
649 DP_IN(base, DP_ISR, isr);
650 }
651}
652
653
Bin Menga1875592016-02-05 19:30:11 -0800654/* U-Boot specific routines */
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900655static u8 *pbuf = NULL;
656
657static int pkey = -1;
658static int initialized = 0;
659
660void uboot_push_packet_len(int len) {
661 PRINTK("pushed len = %d\n", len);
662 if (len >= 2000) {
663 printf("NE2000: packet too big\n");
664 return;
665 }
666 dp83902a_recv(&pbuf[0], len);
667
668 /*Just pass it to the upper layer*/
Joe Hershberger1fd92db2015-04-08 01:41:06 -0500669 net_process_received_packet(&pbuf[0], len);
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900670}
671
672void uboot_push_tx_done(int key, int val) {
673 PRINTK("pushed key = %d\n", key);
674 pkey = key;
675}
676
Bernhard Kaindld0201692011-10-20 10:56:59 +0000677/**
678 * Setup the driver and init MAC address according to doc/README.enetaddr
679 * Called by ne2k_register() before registering the driver @eth layer
680 *
681 * @param struct ethdevice of this instance of the driver for dev->enetaddr
682 * @return 0 on success, -1 on error (causing caller to print error msg)
683 */
684static int ne2k_setup_driver(struct eth_device *dev)
685{
686 PRINTK("### ne2k_setup_driver\n");
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900687
688 if (!pbuf) {
689 pbuf = malloc(2000);
690 if (!pbuf) {
691 printf("Cannot allocate rx buffer\n");
692 return -1;
693 }
694 }
695
696#ifdef CONFIG_DRIVER_NE2000_CCR
697 {
698 vu_char *p = (vu_char *) CONFIG_DRIVER_NE2000_CCR;
699
700 PRINTK("CCR before is %x\n", *p);
701 *p = CONFIG_DRIVER_NE2000_VAL;
702 PRINTK("CCR after is %x\n", *p);
703 }
704#endif
705
706 nic.base = (u8 *) CONFIG_DRIVER_NE2000_BASE;
707
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900708 nic.data = nic.base + DP_DATA;
709 nic.tx_buf1 = START_PG;
710 nic.tx_buf2 = START_PG2;
711 nic.rx_buf_start = RX_START;
712 nic.rx_buf_end = RX_END;
713
Bernhard Kaindld0201692011-10-20 10:56:59 +0000714 /*
715 * According to doc/README.enetaddr, drivers shall give priority
716 * to the MAC address value in the environment, so we do not read
717 * it from the prom or eeprom if it is specified in the environment.
718 */
Simon Glass35affd72017-08-03 12:22:14 -0600719 if (!eth_env_get_enetaddr("ethaddr", dev->enetaddr)) {
Bernhard Kaindld0201692011-10-20 10:56:59 +0000720 /* If the MAC address is not in the environment, get it: */
721 if (!get_prom(dev->enetaddr, nic.base)) /* get MAC from prom */
722 dp83902a_init(dev->enetaddr); /* fallback: seeprom */
723 /* And write it into the environment otherwise eth_write_hwaddr
Simon Glass35affd72017-08-03 12:22:14 -0600724 * returns -1 due to eth_env_get_enetaddr_by_index() failing,
Bernhard Kaindld0201692011-10-20 10:56:59 +0000725 * and this causes "Warning: failed to set MAC address", and
726 * cmd_bdinfo has no ethaddr value which it can show: */
Simon Glassfd1e9592017-08-03 12:22:11 -0600727 eth_env_set_enetaddr("ethaddr", dev->enetaddr);
Bernhard Kaindld0201692011-10-20 10:56:59 +0000728 }
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900729 return 0;
730}
731
Bernhard Kaindld0201692011-10-20 10:56:59 +0000732static int ne2k_init(struct eth_device *dev, bd_t *bd)
733{
734 dp83902a_start(dev->enetaddr);
735 initialized = 1;
736 return 0;
737}
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900738
Bernhard Kaindld0201692011-10-20 10:56:59 +0000739static void ne2k_halt(struct eth_device *dev)
740{
741 debug("### ne2k_halt\n");
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900742 if(initialized)
743 dp83902a_stop();
744 initialized = 0;
745}
746
Bernhard Kaindld0201692011-10-20 10:56:59 +0000747static int ne2k_recv(struct eth_device *dev)
748{
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900749 dp83902a_poll();
750 return 1;
751}
752
Joe Hershberger10cbe3b2012-05-22 18:36:19 +0000753static int ne2k_send(struct eth_device *dev, void *packet, int length)
Bernhard Kaindld0201692011-10-20 10:56:59 +0000754{
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900755 int tmo;
756
Bernhard Kaindld0201692011-10-20 10:56:59 +0000757 debug("### ne2k_send\n");
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900758
759 pkey = -1;
760
761 dp83902a_send((u8 *) packet, length, 666);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200762 tmo = get_timer (0) + TOUT * CONFIG_SYS_HZ;
Nobuhiro Iwamatsu702c85b2008-09-30 15:02:53 +0900763 while(1) {
764 dp83902a_poll();
765 if (pkey != -1) {
766 PRINTK("Packet sucesfully sent\n");
767 return 0;
768 }
769 if (get_timer (0) >= tmo) {
770 printf("transmission error (timoeut)\n");
771 return 0;
772 }
773
774 }
775 return 0;
776}
Bernhard Kaindld0201692011-10-20 10:56:59 +0000777
778/**
779 * Setup the driver for use and register it with the eth layer
780 * @return 0 on success, -1 on error (causing caller to print error msg)
781 */
782int ne2k_register(void)
783{
784 struct eth_device *dev;
785
786 dev = calloc(sizeof(*dev), 1);
787 if (dev == NULL)
788 return -1;
789
790 if (ne2k_setup_driver(dev))
791 return -1;
792
793 dev->init = ne2k_init;
794 dev->halt = ne2k_halt;
795 dev->send = ne2k_send;
796 dev->recv = ne2k_recv;
797
Ben Whitten192bc692015-12-30 13:05:58 +0000798 strcpy(dev->name, "NE2000");
Bernhard Kaindld0201692011-10-20 10:56:59 +0000799
800 return eth_register(dev);
801}