Stefan Roese | dbf6b14 | 2021-09-02 17:00:17 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: MIT */ |
| 2 | /* |
| 3 | * memset - fill memory with a constant byte |
| 4 | * |
| 5 | * Copyright (c) 2012-2021, Arm Limited. |
| 6 | */ |
| 7 | |
| 8 | /* Assumptions: |
| 9 | * |
| 10 | * ARMv8-a, AArch64, Advanced SIMD, unaligned accesses. |
| 11 | * |
| 12 | */ |
| 13 | |
Stefan Roese | 1e43bb6 | 2021-09-02 17:00:18 +0200 | [diff] [blame] | 14 | #include <asm/macro.h> |
Stefan Roese | dbf6b14 | 2021-09-02 17:00:17 +0200 | [diff] [blame] | 15 | #include "asmdefs.h" |
| 16 | |
| 17 | #define dstin x0 |
| 18 | #define val x1 |
| 19 | #define valw w1 |
| 20 | #define count x2 |
| 21 | #define dst x3 |
| 22 | #define dstend x4 |
| 23 | #define zva_val x5 |
| 24 | |
| 25 | ENTRY (memset) |
| 26 | PTR_ARG (0) |
| 27 | SIZE_ARG (2) |
| 28 | |
Stefan Roese | 1e43bb6 | 2021-09-02 17:00:18 +0200 | [diff] [blame] | 29 | /* |
| 30 | * The optimized memset uses the dc opcode, which causes problems |
| 31 | * when the cache is disabled. Let's check if the cache is disabled |
| 32 | * and use a very simple memset implementation in this case. Otherwise |
| 33 | * jump to the optimized version. |
| 34 | */ |
| 35 | switch_el x6, 3f, 2f, 1f |
| 36 | 3: mrs x6, sctlr_el3 |
| 37 | b 0f |
| 38 | 2: mrs x6, sctlr_el2 |
| 39 | b 0f |
| 40 | 1: mrs x6, sctlr_el1 |
| 41 | 0: |
| 42 | tst x6, #CR_C |
| 43 | bne 9f |
| 44 | |
| 45 | /* |
| 46 | * A very "simple" memset implementation without the use of the |
| 47 | * dc opcode. Can be run with caches disabled. |
| 48 | */ |
| 49 | mov x3, #0x0 |
| 50 | cmp count, x3 /* check for zero length */ |
| 51 | beq 8f |
| 52 | 4: strb valw, [dstin, x3] |
| 53 | add x3, x3, #0x1 |
| 54 | cmp count, x3 |
| 55 | bne 4b |
| 56 | 8: ret |
| 57 | 9: |
| 58 | |
| 59 | /* Here the optimized memset version starts */ |
Stefan Roese | dbf6b14 | 2021-09-02 17:00:17 +0200 | [diff] [blame] | 60 | dup v0.16B, valw |
| 61 | add dstend, dstin, count |
| 62 | |
| 63 | cmp count, 96 |
| 64 | b.hi L(set_long) |
| 65 | cmp count, 16 |
| 66 | b.hs L(set_medium) |
| 67 | mov val, v0.D[0] |
| 68 | |
| 69 | /* Set 0..15 bytes. */ |
| 70 | tbz count, 3, 1f |
| 71 | str val, [dstin] |
| 72 | str val, [dstend, -8] |
| 73 | ret |
| 74 | .p2align 4 |
| 75 | 1: tbz count, 2, 2f |
| 76 | str valw, [dstin] |
| 77 | str valw, [dstend, -4] |
| 78 | ret |
| 79 | 2: cbz count, 3f |
| 80 | strb valw, [dstin] |
| 81 | tbz count, 1, 3f |
| 82 | strh valw, [dstend, -2] |
| 83 | 3: ret |
| 84 | |
| 85 | /* Set 17..96 bytes. */ |
| 86 | L(set_medium): |
| 87 | str q0, [dstin] |
| 88 | tbnz count, 6, L(set96) |
| 89 | str q0, [dstend, -16] |
| 90 | tbz count, 5, 1f |
| 91 | str q0, [dstin, 16] |
| 92 | str q0, [dstend, -32] |
| 93 | 1: ret |
| 94 | |
| 95 | .p2align 4 |
| 96 | /* Set 64..96 bytes. Write 64 bytes from the start and |
| 97 | 32 bytes from the end. */ |
| 98 | L(set96): |
| 99 | str q0, [dstin, 16] |
| 100 | stp q0, q0, [dstin, 32] |
| 101 | stp q0, q0, [dstend, -32] |
| 102 | ret |
| 103 | |
| 104 | .p2align 4 |
| 105 | L(set_long): |
| 106 | and valw, valw, 255 |
| 107 | bic dst, dstin, 15 |
| 108 | str q0, [dstin] |
| 109 | cmp count, 160 |
| 110 | ccmp valw, 0, 0, hs |
| 111 | b.ne L(no_zva) |
| 112 | |
| 113 | #ifndef SKIP_ZVA_CHECK |
| 114 | mrs zva_val, dczid_el0 |
| 115 | and zva_val, zva_val, 31 |
| 116 | cmp zva_val, 4 /* ZVA size is 64 bytes. */ |
| 117 | b.ne L(no_zva) |
| 118 | #endif |
| 119 | str q0, [dst, 16] |
| 120 | stp q0, q0, [dst, 32] |
| 121 | bic dst, dst, 63 |
| 122 | sub count, dstend, dst /* Count is now 64 too large. */ |
| 123 | sub count, count, 128 /* Adjust count and bias for loop. */ |
| 124 | |
| 125 | .p2align 4 |
| 126 | L(zva_loop): |
| 127 | add dst, dst, 64 |
| 128 | dc zva, dst |
| 129 | subs count, count, 64 |
| 130 | b.hi L(zva_loop) |
| 131 | stp q0, q0, [dstend, -64] |
| 132 | stp q0, q0, [dstend, -32] |
| 133 | ret |
| 134 | |
| 135 | L(no_zva): |
| 136 | sub count, dstend, dst /* Count is 16 too large. */ |
| 137 | sub dst, dst, 16 /* Dst is biased by -32. */ |
| 138 | sub count, count, 64 + 16 /* Adjust count and bias for loop. */ |
| 139 | L(no_zva_loop): |
| 140 | stp q0, q0, [dst, 32] |
| 141 | stp q0, q0, [dst, 64]! |
| 142 | subs count, count, 64 |
| 143 | b.hi L(no_zva_loop) |
| 144 | stp q0, q0, [dstend, -64] |
| 145 | stp q0, q0, [dstend, -32] |
| 146 | ret |
| 147 | |
| 148 | END (memset) |