blob: 0355b65b841a82070dd72f3da896a35cc8520097 [file] [log] [blame]
wdenkb6e4c402004-01-02 16:05:07 +00001/*
2 * (C) Copyright 2003
3 * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
4 * Atapted for PATI
5 * Denis Peter, d.peter@mpl.ch
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 */
24
25/***********************************************************************************
26 * Bits for the SDRAM controller
27 * -----------------------------
28 *
29 * CAL: CAS Latency. If cleared to 0 (default) the SDRAM controller asserts TA# on
30 * the 2nd Clock after ACTIVE command (CAS Latency = 2). If set to 1 the SDRAM
31 * controller asserts TA# on the 3rd Clock after ACTIVE command (CAS Latency = 3).
32 * RCD: RCD ACTIVE to READ or WRITE Delay (Ras to Cas Delay). If cleared 0 (default)
33 * tRCD of the SDRAM must equal or less 25ns. If set to 1 tRCD must be equal or less 50ns.
34 * WREC:Write Recovery. If cleared 0 (default) tWR of the SDRAM must equal or less 25ns.
35 * If set to 1 tWR must be equal or less 50ns.
36 * RP: Precharge Command Time. If cleared 0 (default) tRP of the SDRAM must equal or less
37 * 25ns. If set to 1 tRP must be equal or less 50ns.
38 * RC: Auto Refresh to Active Time. If cleared 0 (default) tRC of the SDRAM must equal
39 * or less 75ns. If set to 1 tRC must be equal or less 100ns.
40 * LMR: Bit to set the Mode Register of the SDRAM. If set, the next access to the SDRAM
41 * is the Load Mode Register Command.
42 * IIP: Init in progress. Set to 1 for starting the init sequence
43 * (Precharge All). As long this bit is set, the Precharge All is still in progress.
44 * After command has completed, wait at least for 8 refresh (200usec) before proceed.
45 **********************************************************************************/
46
47#include <common.h>
48#include <mpc5xx.h>
49#include <devices.h>
50#include <pci_ids.h>
51#define PLX9056_LOC
52#include "plx9056.h"
53#include "pati.h"
54
55#if defined(__APPLE__)
56/* Leading underscore on symbols */
57# define SYM_CHAR "_"
58#else /* No leading character on symbols */
59# define SYM_CHAR
60#endif
61
62#undef SDRAM_DEBUG
63/*
64 * Macros to generate global absolutes.
65 */
66#define GEN_SYMNAME(str) SYM_CHAR #str
67#define GEN_VALUE(str) #str
68#define GEN_ABS(name, value) \
69 asm (".globl " GEN_SYMNAME(name)); \
70 asm (GEN_SYMNAME(name) " = " GEN_VALUE(value))
71
72
73/************************************************************************
74 * Early debug routines
75 */
76void write_hex (unsigned char i)
77{
78 char cc;
79
80 cc = i >> 4;
81 cc &= 0xf;
82 if (cc > 9)
83 serial_putc (cc + 55);
84 else
85 serial_putc (cc + 48);
86 cc = i & 0xf;
87 if (cc > 9)
88 serial_putc (cc + 55);
89 else
90 serial_putc (cc + 48);
91}
92
93#if defined(SDRAM_DEBUG)
94
95void write_4hex (unsigned long val)
96{
97 write_hex ((unsigned char) (val >> 24));
98 write_hex ((unsigned char) (val >> 16));
99 write_hex ((unsigned char) (val >> 8));
100 write_hex ((unsigned char) val);
101}
102
103#endif
104
105unsigned long in32(unsigned long addr)
106{
107 unsigned long *p=(unsigned long *)addr;
108 return *p;
109}
110
111void out32(unsigned long addr,unsigned long data)
112{
113 unsigned long *p=(unsigned long *)addr;
114 *p=data;
115}
116
117typedef struct {
118 unsigned short boardtype; /* Board revision and Population Options */
119 unsigned char cal; /* cas Latency 0:CAL=2 1:CAL=3 */
120 unsigned char rcd; /* ras to cas delay 0:<25ns 1:<50ns*/
121 unsigned char wrec; /* write recovery 0:<25ns 1:<50ns */
122 unsigned char pr; /* Precharge Command Time 0:<25ns 1:<50ns */
123 unsigned char rc; /* Auto Refresh to Active Time 0:<75ns 1:<100ns */
124 unsigned char sz; /* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
125} sdram_t;
126
127const sdram_t sdram_table[] = {
128 { 0x0000, /* PATI Rev A, 16MByte -1 Board */
129 1, /* Case Latenty = 3 */
130 0, /* ras to cas delay 0 (20ns) */
131 0, /* write recovery 0:<25ns 1:<50ns*/
132 0, /* Precharge Command Time 0 (20ns) */
133 0, /* Auto Refresh to Active Time 0 (68) */
134 2 /* log binary => Size 2 = 16MByte, 1=8 */
135 },
136 { 0xffff, /* terminator */
137 0xff,
138 0xff,
139 0xff,
140 0xff,
141 0xff,
142 0xff }
143};
144
145
146extern int mem_test (unsigned long start, unsigned long ramsize, int quiet);
147extern void mem_test_reloc(void);
148
149/*
150 * Get RAM size.
151 */
152long int initdram(int board_type)
153{
154 unsigned char board_rev;
155 unsigned long reg;
156 unsigned long lmr;
157 int i,timeout;
158
159#if defined(SDRAM_DEBUG)
160 reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
161 puts("\n\nSYSTEM part 0x"); write_4hex(SYSCNTR_PART(reg));
162 puts(" Vers 0x"); write_4hex(SYSCNTR_ID(reg));
163 puts("\nSDRAM part 0x"); write_4hex(SDRAM_PART(reg));
164 puts(" Vers 0x"); write_4hex(SDRAM_ID(reg));
165 reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
166 puts("\nBoard rev. 0x"); write_4hex(SYSCNTR_BREV(reg));
167 putc('\n');
168#endif
169 reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
170 board_rev=(unsigned char)(SYSCNTR_BREV(reg));
171 i=0;
172 while(1) {
173 if(sdram_table[i].boardtype==0xffff) {
174 puts("ERROR, found no table for Board 0x");
175 write_hex(board_rev);
176 while(1);
177 }
178 if(sdram_table[i].boardtype==(unsigned char)board_rev)
179 break;
180 i++;
181 }
182 /* Set CAL, RCD, WREQ, PR and RC Bits */
183#if defined(SDRAM_DEBUG)
184 puts("Set CAL, RCD, WREQ, PR and RC Bits\n");
185#endif
186 /* mask bits */
187 reg &= ~(SET_REG_BIT(1,SDRAM_CAL) | SET_REG_BIT(1,SDRAM_RCD) | SET_REG_BIT(1,SDRAM_WREQ) |
188 SET_REG_BIT(1,SDRAM_PR) | SET_REG_BIT(1,SDRAM_RC) | SET_REG_BIT(1,SDRAM_LMR) |
189 SET_REG_BIT(1,SDRAM_IIP) | SET_REG_BIT(1,SDRAM_RES0));
190 /* set bits */
191 reg |= (SET_REG_BIT(sdram_table[i].cal,SDRAM_CAL) |
192 SET_REG_BIT(sdram_table[i].rcd,SDRAM_RCD) |
193 SET_REG_BIT(sdram_table[i].wrec,SDRAM_WREQ) |
194 SET_REG_BIT(sdram_table[i].pr,SDRAM_PR) |
195 SET_REG_BIT(sdram_table[i].rc,SDRAM_RC));
196
197 out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
198 /* step 2 set IIP */
199#if defined(SDRAM_DEBUG)
200 puts("step 2 set IIP\n");
201#endif
202 /* step 2 set IIP */
203 reg |= SET_REG_BIT(1,SDRAM_IIP);
204 timeout=0;
205 while (timeout!=0xffff) {
206 __asm__ volatile("eieio");
207 reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
208 if((reg & SET_REG_BIT(1,SDRAM_IIP))==0)
209 break;
210 timeout++;
211 udelay(1);
212 }
213 /* wait for at least 8 refresh */
214 udelay(1000);
215 /* set LMR */
216 reg |= SET_REG_BIT(1,SDRAM_LMR);
217 out32(PLD_CONFIG_BASE+PLD_BOARD_TIMING,reg);
218 __asm__ volatile("eieio");
219 lmr=0x00000002; /* sequential burst 4 data */
220 if(sdram_table[i].cal==1)
221 lmr|=0x00000030; /* cal = 3 */
222 else
223 lmr|=0000000020; /* cal = 2 */
224 /* rest standard operation programmed write burst length */
225 /* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
226 lmr<<=2;
227 in32(CFG_SDRAM_BASE + lmr);
228 /* ok, we're done, return SDRAM size */
229 return ((0x400000 << sdram_table[i].sz)); /* log2 value of 4MByte */
230}
231
232
233void set_flash_vpp(int ext_vpp, int ext_wp, int int_vpp)
234{
235 unsigned long reg;
236 reg=in32(PLD_CONF_REG2+PLD_CONFIG_BASE);
237 reg &= ~(SET_REG_BIT(1,SYSCNTR_CPU_VPP) |
238 SET_REG_BIT(1,SYSCNTR_FL_VPP) |
239 SET_REG_BIT(1,SYSCNTR_FL_WP));
240
241 reg |= (SET_REG_BIT(int_vpp,SYSCNTR_CPU_VPP) |
242 SET_REG_BIT(ext_vpp,SYSCNTR_FL_VPP) |
243 SET_REG_BIT(ext_wp,SYSCNTR_FL_WP));
244 out32(PLD_CONF_REG2+PLD_CONFIG_BASE,reg);
245 udelay(100);
246}
247
248
249void show_pld_regs(void)
250{
251 unsigned long reg,reg1;
252 reg=in32(PLD_CONFIG_BASE+PLD_PART_ID);
253 printf("\nSYSTEM part %ld, Vers %ld\n",SYSCNTR_PART(reg),SYSCNTR_ID(reg));
254 printf("SDRAM part %ld, Vers %ld\n",SDRAM_PART(reg),SDRAM_ID(reg));
255 reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
256 printf("Board rev. %c\n",(char) (SYSCNTR_BREV(reg)+'A'));
257 printf("Waitstates %ld\n",GET_SYSCNTR_FLWAIT(reg));
258 printf("SDRAM: CAL=%ld RCD=%ld WREQ=%ld PR=%ld\n RC=%ld LMR=%ld IIP=%ld\n",
259 GET_REG_BIT(reg,SDRAM_CAL),GET_REG_BIT(reg,SDRAM_RCD),
260 GET_REG_BIT(reg,SDRAM_WREQ),GET_REG_BIT(reg,SDRAM_PR),
261 GET_REG_BIT(reg,SDRAM_RC),GET_REG_BIT(reg,SDRAM_LMR),
262 GET_REG_BIT(reg,SDRAM_IIP));
263 reg=in32(PLD_CONFIG_BASE+PLD_CONF_REG1);
264 reg1=in32(PLD_CONFIG_BASE+PLD_CONF_REG2);
265 printf("HW Config: FLAG=%ld IP=%ld index=%ld PRPM=%ld\n ICW=%ld ISB=%ld BDIS=%ld PCIM=%ld\n",
266 GET_REG_BIT(reg,SYSCNTR_FLAG),GET_REG_BIT(reg,SYSCNTR_IP),
267 GET_SYSCNTR_BOOTIND(reg),GET_REG_BIT(reg,SYSCNTR_PRM),
268 GET_REG_BIT(reg,SYSCNTR_ICW),GET_SYSCNTR_ISB(reg),
269 GET_REG_BIT(reg1,SYSCNTR_BDIS),GET_REG_BIT(reg1,SYSCNTR_PCIM));
270 printf("Switches: MUX=%ld PCI_DIS=%ld Boot_EN=%ld Config=%ld\n",GET_SDRAM_MUX(reg),
271 GET_REG_BIT(reg,SDRAM_PDIS),GET_REG_BIT(reg1,SYSCNTR_BOOTEN),
272 GET_SYSCNTR_CFG(reg1));
273 printf("Misc: RIP=%ld CPU_VPP=%ld FLSH_VPP=%ld FLSH_WP=%ld\n\n",
274 GET_REG_BIT(reg,SDRAM_RIP),GET_REG_BIT(reg1,SYSCNTR_CPU_VPP),
275 GET_REG_BIT(reg1,SYSCNTR_FL_VPP),GET_REG_BIT(reg1,SYSCNTR_FL_WP));
276}
277
278
279/****************************************************************
280 * Setting IOs
281 * -----------
282 * GPIO6 is User LED1
283 * GPIO7 is Interrupt PLX (Output)
284 * GPIO5 is User LED0
285 * GPIO2 is PLX USERi (Output)
286 * GPIO1 is PLX Interrupt (Input)
287 ****************************************************************/
288 void init_ios(void)
289 {
290 volatile immap_t * immr = (immap_t *) CFG_IMMR;
291 volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
292 unsigned long reg;
293 reg=sysconf->sc_sgpiocr; /* Data direction register */
294 reg &= ~0x67000000;
295 reg |= 0x27000000; /* set outpupts */
296 sysconf->sc_sgpiocr=reg; /* Data direction register */
297 reg=sysconf->sc_sgpiodt2; /* Data register */
298 /* set output to 0 */
299 reg &= ~0x27000000;
300 /* set IRQ and USERi to 1 */
301 reg |= 0x28000000;
302 sysconf->sc_sgpiodt2=reg; /* Data register */
303}
304
305void user_led0(int led_on)
306{
307 volatile immap_t * immr = (immap_t *) CFG_IMMR;
308 volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
309 unsigned long reg;
310 reg=sysconf->sc_sgpiodt2; /* Data register */
311 if(led_on) /* set output to 1 */
312 reg |= 0x04000000;
313 else
314 reg &= ~0x04000000;
315 sysconf->sc_sgpiodt2=reg; /* Data register */
316}
317
318void user_led1(int led_on)
319{
320 volatile immap_t * immr = (immap_t *) CFG_IMMR;
321 volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
322 unsigned long reg;
323 reg=sysconf->sc_sgpiodt2; /* Data register */
324 if(led_on) /* set output to 1 */
325 reg |= 0x02000000;
326 else
327 reg &= ~0x02000000;
328 sysconf->sc_sgpiodt2=reg; /* Data register */
329}
330
331
332/****************************************************************
333 * Last Stage Init
334 ****************************************************************/
335int last_stage_init (void)
336{
337 mem_test_reloc();
338 init_ios();
339 return 0;
340}
341
342/****************************************************************
343 * Check the board
344 ****************************************************************/
345
346#define BOARD_NAME "PATI"
347
348int checkboard (void)
349{
350 unsigned char s[50];
351 unsigned long reg;
352 char rev;
353 int i;
354
355 puts ("\nBoard: ");
356 reg=in32(PLD_CONFIG_BASE+PLD_BOARD_TIMING);
357 rev=(char)(SYSCNTR_BREV(reg)+'A');
358 i = getenv_r ("serial#", s, 32);
359 if ((i == -1)) {
360 puts ("### No HW ID - assuming " BOARD_NAME);
361 printf(" Rev. %c\n",rev);
362 }
363 else {
364 s[sizeof(BOARD_NAME)-1] = 0;
365 printf ("%s-1 Rev %c SN: %s\n", s,rev,
366 &s[sizeof(BOARD_NAME)]);
367 }
368 set_flash_vpp(1,0,0); /* set Flash VPP */
369 return 0;
370}
371
372
373#ifdef CFG_PCI_CON_DEVICE
374/************************************************************************
375 * PCI Communication
376 *
377 * Alive (Pinging):
378 * ----------------
379 * PCI Host sends message ALIVE, Local acknowledges with ALIVE
380 *
381 * PCI_CON console over PCI:
382 * -------------------------
383 * Local side:
384 * - uses PCI9056_LOC_TO_PCI_DBELL register to signal that
385 * data is avaible (PCIMSG_CONN)
386 * - uses PCI9056_MAILBOX1 to send data
387 * - uses PCI9056_MAILBOX0 to receive data
388 * PCI side:
389 * - uses PCI9056_PCI_TO_LOC_DBELL register to signal that
390 * data is avaible (PCIMSG_CONN)
391 * - uses PCI9056_MAILBOX0 to send data
392 * - uses PCI9056_MAILBOX1 to receive data
393 *
394 * How it works:
395 * Send:
396 * - check if PCICON_TRANSMIT_REG is empty
397 * - write data or'ed with 0x80000000 into the PCICON_TRANSMIT_REG
398 * - write PCIMSG_CONN into the PCICON_DBELL_REG to signal a data
399 * is waiting
400 * Receive:
401 * - get an interrupt via the PCICON_ACK_REG register message
402 * PCIMSG_CONN
403 * - write the data from the PCICON_RECEIVE_REG into the receive
404 * buffer and if the receive buffer is not full, clear the
405 * PCICON_RECEIVE_REG (this allows the counterpart to write more data)
406 * - Clear the interrupt by writing 0xFFFFFFFF to the PCICON_ACK_REG
407 *
408 * The PCICON_RECEIVE_REG must be cleared by the routine which reads
409 * the receive buffer if the buffer is not full any more
410 *
411 */
412
413#undef PCI_CON_DEBUG
414
415#ifdef PCI_CON_DEBUG
416#define PCI_CON_PRINTF(fmt,args...) serial_printf (fmt ,##args)
417#else
418#define PCI_CON_PRINTF(fmt,args...)
419#endif
420
421
422/*********************************************************
423 * we work only with a receive buffer on eiter side.
424 * Transmit buffer is free, if mailbox is cleared.
425 * Transmit character is or'ed with 0x80000000
426 * PATI receive register MAILBOX0
427 * PATI transmit register MAILBOX1
428 *********************************************************/
429#define PCICON_RECEIVE_REG PCI9056_MAILBOX0
430#define PCICON_TRANSMIT_REG PCI9056_MAILBOX1
431#define PCICON_DBELL_REG PCI9056_LOC_TO_PCI_DBELL
432#define PCICON_ACK_REG PCI9056_PCI_TO_LOC_DBELL
433
434
435#define PCIMSG_ALIVE 0x1
436#define PCIMSG_CONN 0x2
437#define PCIMSG_DISC 0x3
438#define PCIMSG_CON_DATA 0x5
439
440
441#define PCICON_GET_REG(x) (in32(x + PCI_CONFIG_BASE))
442#define PCICON_SET_REG(x,y) (out32(x + PCI_CONFIG_BASE,y))
443#define PCICON_TX_FLAG 0x80000000
444
445
446#define REC_BUFFER_SIZE 0x100
447int recbuf[REC_BUFFER_SIZE];
448static int r_ptr = 0;
449int w_ptr;
450device_t pci_con_dev;
451int conn=0;
452int buff_full=0;
453
454void pci_con_put_it(const char c)
455{
456 /* Test for completition */
457 unsigned long reg;
458 do {
459 reg=PCICON_GET_REG(PCICON_TRANSMIT_REG);
460 }while(reg);
461 reg=PCICON_TX_FLAG + c;
462 PCICON_SET_REG(PCICON_TRANSMIT_REG,reg);
463 PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_CON_DATA);
464}
465
466void pci_con_putc(const char c)
467{
468 pci_con_put_it(c);
469 if(c == '\n')
470 pci_con_put_it('\r');
471}
472
473
474int pci_con_getc(void)
475{
476 int res;
477 int diff;
478 while(r_ptr==(volatile int)w_ptr);
479 res=recbuf[r_ptr++];
480 if(r_ptr==REC_BUFFER_SIZE)
481 r_ptr=0;
482 if(w_ptr<r_ptr)
483 diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
484 else
485 diff=r_ptr-w_ptr;
486 if((diff<(REC_BUFFER_SIZE-4)) && buff_full) {
487 /* clear Mail box */
488 buff_full=0;
489 PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
490 }
491 return res;
492}
493
494int pci_con_tstc(void)
495{
496 if(r_ptr==(volatile int)w_ptr)
497 return 0;
498 return 1;
499}
500
501void pci_con_puts (const char *s)
502{
503 while (*s) {
504 pci_con_putc(*s);
505 ++s;
506 }
507}
508
509void pci_con_init (void)
510{
511 w_ptr = 0;
512 r_ptr = 0;
513 PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
514 conn=1;
515}
516
517/*******************************************
518 * IRQ routine
519 ******************************************/
520int pci_dorbell_irq(void)
521{
522 unsigned long reg,data;
523 int diff;
524 reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
525 PCI_CON_PRINTF(" PCI9056_INT_CTRL_STAT = %08lX\n",reg);
526 if(reg & (1<<20) ) {
527 /* read doorbell */
528 reg=PCICON_GET_REG(PCICON_ACK_REG);
529 switch(reg) {
530 case PCIMSG_ALIVE:
531 PCI_CON_PRINTF(" Alive\n");
532 PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_ALIVE);
533 break;
534 case PCIMSG_CONN:
535 PCI_CON_PRINTF(" Conn %d",conn);
536 w_ptr = 0;
537 r_ptr = 0;
538 buff_full=0;
539 PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
540 conn=1;
541 PCI_CON_PRINTF(" ... %d\n",conn);
542 break;
543 case PCIMSG_CON_DATA:
544 data=PCICON_GET_REG(PCICON_RECEIVE_REG);
545 recbuf[w_ptr++]=(int)(data&0xff);
546 PCI_CON_PRINTF(" Data Console %lX, %X %d %d %X\n",data,((int)(data&0xFF)),
547 r_ptr,w_ptr,recbuf[w_ptr-1]);
548 if(w_ptr==REC_BUFFER_SIZE)
549 w_ptr=0;
550 if(w_ptr<r_ptr)
551 diff=r_ptr+REC_BUFFER_SIZE-w_ptr;
552 else
553 diff=r_ptr-w_ptr;
554 if(diff>(REC_BUFFER_SIZE-4))
555 buff_full=1;
556 else
557 /* clear Mail box */
558 PCICON_SET_REG(PCICON_RECEIVE_REG,0L);
559 break;
560 default:
561 serial_printf(" PCI9056_PCI_TO_LOC_DBELL = %08lX\n",reg);
562 }
563 /* clear IRQ */
564 PCICON_SET_REG(PCICON_ACK_REG,~0L);
565 }
566 return 0;
567}
568
569void pci_con_connect(void)
570{
571 unsigned long reg;
572 conn=0;
573 reg=PCICON_GET_REG(PCI9056_INT_CTRL_STAT);
574 /* default 0x0f010180 */
575 reg &= 0xff000000;
576 reg |= 0x00030000; /* enable local dorbell */
577 reg |= 0x00000300; /* enable PCI dorbell */
578 PCICON_SET_REG(PCI9056_INT_CTRL_STAT , reg);
579 irq_install_handler (0x2, (interrupt_handler_t *) pci_dorbell_irq,NULL);
580 memset (&pci_con_dev, 0, sizeof (pci_con_dev));
581 strcpy (pci_con_dev.name, "pci_con");
582 pci_con_dev.flags = DEV_FLAGS_OUTPUT | DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
583 pci_con_dev.putc = pci_con_putc;
584 pci_con_dev.puts = pci_con_puts;
585 pci_con_dev.getc = pci_con_getc;
586 pci_con_dev.tstc = pci_con_tstc;
587 device_register (&pci_con_dev);
588 printf("PATI ready for PCI connection, type ctrl-c for exit\n");
589 do {
590 udelay(10);
591 if((volatile int)conn)
592 break;
593 if(ctrlc()) {
594 irq_free_handler(0x2);
595 return;
596 }
597 }while(1);
598 console_assign(stdin,"pci_con");
599 console_assign(stderr,"pci_con");
600 console_assign(stdout,"pci_con");
601}
602
603void pci_con_disc(void)
604{
605 console_assign(stdin,"serial");
606 console_assign(stderr,"serial");
607 console_assign(stdout,"serial");
608 PCICON_SET_REG(PCICON_DBELL_REG,PCIMSG_DISC);
609 /* reconnection */
610 irq_free_handler(0x02);
611 pci_con_connect();
612}
613#endif /* #ifdef CFG_PCI_CON_DEVICE */
614
615/*
616 * Absolute environment address for linker file.
617 */
618GEN_ABS(env_start, CFG_ENV_OFFSET + CFG_FLASH_BASE);