| Mamta Shukla | 3c7ad8c | 2022-07-12 14:36:19 +0000 | [diff] [blame] | 1 | CONFIG_ARM=y |
| 2 | CONFIG_ARCH_IMX8M=y |
| 3 | CONFIG_SYS_TEXT_BASE=0x40200000 |
| 4 | CONFIG_SYS_MALLOC_LEN=0x2000000 |
| 5 | CONFIG_SPL_GPIO=y |
| 6 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| 7 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| 8 | CONFIG_ENV_SIZE=0x1000 |
| 9 | CONFIG_ENV_OFFSET=0x400000 |
| 10 | CONFIG_DM_GPIO=y |
| 11 | CONFIG_DEFAULT_DEVICE_TREE="imx8mm-evk" |
| 12 | CONFIG_SPL_TEXT_BASE=0x7E2000 |
| 13 | CONFIG_TARGET_IMX8MM_EVK=y |
| 14 | CONFIG_IMX_CONFIG="board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg" |
| 15 | CONFIG_SPL_MMC=y |
| 16 | CONFIG_SPL_NOR_SUPPORT=y |
| 17 | CONFIG_SPL_SERIAL=y |
| 18 | CONFIG_SPL_DRIVERS_MISC=y |
| 19 | CONFIG_SPL=y |
| 20 | CONFIG_SYS_LOAD_ADDR=0x40480000 |
| 21 | CONFIG_DISTRO_DEFAULTS=y |
| 22 | CONFIG_FIT=y |
| 23 | CONFIG_FIT_EXTERNAL_OFFSET=0x3000 |
| 24 | CONFIG_SPL_LOAD_FIT=y |
| 25 | # CONFIG_USE_SPL_FIT_GENERATOR is not set |
| 26 | CONFIG_OF_SYSTEM_SETUP=y |
| 27 | CONFIG_BOARD_LATE_INIT=y |
| 28 | CONFIG_SPL_MAX_SIZE=0x25000 |
| 29 | CONFIG_SPL_HAS_BSS_LINKER_SECTION=y |
| 30 | CONFIG_SPL_BSS_START_ADDR=0x910000 |
| 31 | CONFIG_SPL_BSS_MAX_SIZE=0x2000 |
| 32 | CONFIG_SPL_BOARD_INIT=y |
| 33 | # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| 34 | CONFIG_SPL_STACK=0x920000 |
| 35 | CONFIG_SYS_SPL_MALLOC=y |
| 36 | CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y |
| 37 | CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 |
| 38 | CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 |
| 39 | CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y |
| 40 | CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 |
| 41 | CONFIG_SPL_I2C=y |
| 42 | CONFIG_SPL_POWER=y |
| 43 | CONFIG_SPL_WATCHDOG=y |
| 44 | CONFIG_SYS_PROMPT="u-boot=> " |
| 45 | CONFIG_SYS_MAXARGS=64 |
| 46 | CONFIG_SYS_CBSIZE=2048 |
| 47 | CONFIG_SYS_PBSIZE=2074 |
| 48 | # CONFIG_CMD_EXPORTENV is not set |
| 49 | # CONFIG_CMD_IMPORTENV is not set |
| 50 | # CONFIG_CMD_CRC32 is not set |
| 51 | CONFIG_CMD_CLK=y |
| 52 | CONFIG_CMD_FUSE=y |
| 53 | CONFIG_CMD_GPIO=y |
| 54 | CONFIG_CMD_I2C=y |
| 55 | CONFIG_CMD_MMC=y |
| 56 | CONFIG_CMD_CACHE=y |
| 57 | CONFIG_CMD_REGULATOR=y |
| 58 | CONFIG_CMD_EXT4_WRITE=y |
| 59 | CONFIG_OF_CONTROL=y |
| 60 | CONFIG_SPL_OF_CONTROL=y |
| 61 | CONFIG_ENV_OVERWRITE=y |
| 62 | CONFIG_ENV_IS_IN_MMC=y |
| 63 | CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| 64 | CONFIG_SYS_MMC_ENV_DEV=1 |
| 65 | CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y |
| 66 | CONFIG_USE_ETHPRIME=y |
| 67 | CONFIG_ETHPRIME="FEC" |
| 68 | CONFIG_SPL_DM=y |
| 69 | CONFIG_SPL_CLK_COMPOSITE_CCF=y |
| 70 | CONFIG_CLK_COMPOSITE_CCF=y |
| 71 | CONFIG_SPL_CLK_IMX8MM=y |
| 72 | CONFIG_CLK_IMX8MM=y |
| 73 | CONFIG_MXC_GPIO=y |
| 74 | CONFIG_DM_I2C=y |
| 75 | CONFIG_SUPPORT_EMMC_BOOT=y |
| 76 | CONFIG_MMC_IO_VOLTAGE=y |
| 77 | CONFIG_MMC_UHS_SUPPORT=y |
| 78 | CONFIG_MMC_HS400_ES_SUPPORT=y |
| 79 | CONFIG_MMC_HS400_SUPPORT=y |
| 80 | CONFIG_FSL_USDHC=y |
| 81 | CONFIG_PHYLIB=y |
| 82 | CONFIG_PHY_ATHEROS=y |
| 83 | CONFIG_DM_ETH=y |
| 84 | CONFIG_PHY_GIGE=y |
| 85 | CONFIG_FEC_MXC=y |
| 86 | CONFIG_MII=y |
| 87 | CONFIG_PINCTRL=y |
| 88 | CONFIG_SPL_PINCTRL=y |
| 89 | CONFIG_PINCTRL_IMX8M=y |
| 90 | CONFIG_DM_PMIC=y |
| 91 | CONFIG_SPL_DM_PMIC_PCA9450=y |
| 92 | CONFIG_DM_REGULATOR=y |
| 93 | CONFIG_DM_REGULATOR_FIXED=y |
| 94 | CONFIG_DM_REGULATOR_GPIO=y |
| 95 | CONFIG_DM_PWM=y |
| 96 | CONFIG_PWM_IMX=y |
| 97 | CONFIG_DM_SERIAL=y |
| 98 | CONFIG_MXC_UART=y |
| 99 | CONFIG_SYSRESET=y |
| 100 | CONFIG_SPL_SYSRESET=y |
| 101 | CONFIG_SYSRESET_PSCI=y |
| 102 | CONFIG_SYSRESET_WATCHDOG=y |
| 103 | CONFIG_DM_THERMAL=y |
| 104 | CONFIG_IMX_WATCHDOG=y |
| 105 | CONFIG_NXP_FSPI=y |
| 106 | CONFIG_SPI=y |
| 107 | CONFIG_SPI_FLASH=y |
| 108 | CONFIG_SPI_FLASH_BAR=y |
| 109 | CONFIG_DM_SPI=y |
| 110 | CONFIG_DM_SPI_FLASH=y |
| 111 | CONFIG_SPI_FLASH_STMICRO=y |
| 112 | CONFIG_SF_DEFAULT_BUS=0 |
| 113 | CONFIG_SF_DEFAULT_CS=0 |
| 114 | CONFIG_SF_DEFAULT_SPEED=40000000 |
| 115 | CONFIG_SF_DEFAULT_MODE=0 |
| 116 | CONFIG_FSPI_CONF_HEADER=y |
| 117 | CONFIG_FSPI_CONF_FILE="fspi_header.bin" |
| 118 | CONFIG_READ_CLK_SOURCE=0x00 |
| 119 | CONFIG_DEVICE_TYPE=0x01 |
| 120 | CONFIG_FLASH_PAD_TYPE=0x01 |
| 121 | CONFIG_SERIAL_CLK_FREQUENCY=0x02 |
| 122 | CONFIG_LUT_CUSTOM_SEQUENCE=0x00 |
| 123 | CONFIG_LUT_SEQUENCE="0x0b, 0x04, 0x18, 0x08, 0x08, 0x30, 0x04, 0x24" |