blob: 8f707b47dbe39a5dca1405b9b8f7b5db16f6db13 [file] [log] [blame]
Mario Sixc6b89f32018-02-12 08:05:57 +01001/dts-v1/;
2
3#define USB_CLASS_HUB 9
4
5/ {
6 #address-cells = <2>;
7 #size-cells = <2>;
8 model = "sandbox";
9
10 aliases {
11 eth5 = "/eth@90000000";
12 i2c0 = &i2c_0;
13 pci0 = &pci;
14 rtc0 = &rtc_0;
15 };
16
17 chosen {
18 stdout-path = "/serial";
19 };
20
21 cros_ec: cros-ec@0 {
22 reg = <0 0 0 0>;
23 compatible = "google,cros-ec-sandbox";
24
25 /*
26 * This describes the flash memory within the EC. Note
27 * that the STM32L flash erases to 0, not 0xff.
28 */
29 #address-cells = <1>;
30 #size-cells = <1>;
31 flash@8000000 {
32 reg = <0x08000000 0x20000>;
33 erase-value = <0>;
34 #address-cells = <1>;
35 #size-cells = <1>;
36
37 /* Information for sandbox */
38 ro {
39 reg = <0 0xf000>;
40 };
41 wp-ro {
42 reg = <0xf000 0x1000>;
43 };
44 rw {
45 reg = <0x10000 0x10000>;
46 };
47 };
48 };
49
50 eth@10002000 {
51 compatible = "sandbox,eth";
52 reg = <0x0 0x10002000 0x0 0x1000>;
53 fake-host-hwaddr = [00 00 66 44 22 00];
54 };
55
56 eth@80000000 {
57 compatible = "sandbox,eth-raw";
58 reg = <0x0 0x80000000 0x0 0x1000>;
59 host-raw-interface = "eth0";
60 };
61
62 eth@90000000 {
63 compatible = "sandbox,eth-raw";
64 reg = <0x0 0x90000000 0x0 0x1000>;
65 host-raw-interface = "lo";
66 };
67
68 gpio_a: gpios@0 {
69 gpio-controller;
70 compatible = "sandbox,gpio";
71 #gpio-cells = <1>;
72 gpio-bank-name = "a";
73 sandbox,gpio-count = <20>;
74 };
75
76 gpio_b: gpios@1 {
77 gpio-controller;
78 compatible = "sandbox,gpio";
79 #gpio-cells = <2>;
80 gpio-bank-name = "b";
81 sandbox,gpio-count = <10>;
82 };
83
84 hexagon {
85 compatible = "demo-simple";
86 colour = "white";
87 sides = <6>;
88 };
89
90 i2c_0: i2c@0 {
91 #address-cells = <1>;
92 #size-cells = <0>;
93 reg = <0 0 0 0>;
94 compatible = "sandbox,i2c";
95 clock-frequency = <400000>;
96 pinctrl-names = "default";
97 pinctrl-0 = <&pinctrl_i2c0>;
98 eeprom@2c {
99 reg = <0x2c>;
100 compatible = "i2c-eeprom";
101 emul {
102 compatible = "sandbox,i2c-eeprom";
103 sandbox,filename = "i2c.bin";
104 sandbox,size = <128>;
105 };
106 };
107
108 rtc_0: rtc@43 {
109 reg = <0x43>;
110 compatible = "sandbox-rtc";
111 emul {
112 compatible = "sandbox,i2c-rtc";
113 };
114 };
115 sandbox_pmic: sandbox_pmic {
116 reg = <0x40>;
117 };
Lukasz Majewski686df492018-05-15 16:26:40 +0200118
119 mc34708: pmic@41 {
120 reg = <0x41>;
121 };
Mario Sixc6b89f32018-02-12 08:05:57 +0100122 };
123
124 lcd {
125 u-boot,dm-pre-reloc;
126 compatible = "sandbox,lcd-sdl";
127 xres = <1366>;
128 yres = <768>;
129 };
130
131 leds {
132 compatible = "gpio-leds";
133
134 iracibble {
135 gpios = <&gpio_a 1 0>;
136 label = "sandbox:red";
137 };
138
139 martinet {
140 gpios = <&gpio_a 2 0>;
141 label = "sandbox:green";
142 };
143 };
144
145 pci: pci-controller {
146 compatible = "sandbox,pci";
147 device_type = "pci";
148 #address-cells = <3>;
149 #size-cells = <2>;
150 ranges = <0x02000000 0 0x10000000 0 0x10000000 0 0x2000
151 0x01000000 0 0x20000000 0 0x20000000 0 0x2000>;
152 pci@1f,0 {
153 compatible = "pci-generic";
154 reg = <0xf800 0 0 0 0>;
155 emul@1f,0 {
156 compatible = "sandbox,swap-case";
157 };
158 };
159 };
160
161 pinctrl {
162 compatible = "sandbox,pinctrl";
163
164 pinctrl_i2c0: i2c0 {
165 groups = "i2c";
166 function = "i2c";
167 bias-pull-up;
168 };
169
170 pinctrl_serial0: uart0 {
171 groups = "serial_a";
172 function = "serial";
173 };
174 };
175
176 reset@1 {
177 compatible = "sandbox,reset";
178 };
179
180 spi@0 {
181 #address-cells = <1>;
182 #size-cells = <0>;
183 reg = <0 0 0 0>;
184 compatible = "sandbox,spi";
185 cs-gpios = <0>, <&gpio_a 0>;
186 firmware_storage_spi: flash@0 {
187 reg = <0>;
188 compatible = "spansion,m25p16", "sandbox,spi-flash";
189 spi-max-frequency = <40000000>;
190 sandbox,filename = "spi.bin";
191 };
192 };
193
194 spl-test {
195 u-boot,dm-pre-reloc;
196 compatible = "sandbox,spl-test";
197 boolval;
198 intval = <1>;
199 intarray = <2 3 4>;
200 byteval = [05];
201 bytearray = [06];
202 longbytearray = [09 0a 0b 0c 0d 0e 0f 10 11];
203 stringval = "message";
204 stringarray = "multi-word", "message";
205 };
206
207 spl-test2 {
208 u-boot,dm-pre-reloc;
209 compatible = "sandbox,spl-test";
210 intval = <3>;
211 intarray = <5>;
212 byteval = [08];
213 bytearray = [01 23 34];
214 longbytearray = [09 0a 0b 0c];
215 stringval = "message2";
216 stringarray = "another", "multi-word", "message";
217 };
218
219 spl-test3 {
220 u-boot,dm-pre-reloc;
221 compatible = "sandbox,spl-test";
222 stringarray = "one";
223 };
224
225 spl-test4 {
226 u-boot,dm-pre-reloc;
227 compatible = "sandbox,spl-test.2";
228 };
229
230 square {
231 compatible = "demo-shape";
232 colour = "blue";
233 sides = <4>;
234 };
235
236 timer {
237 compatible = "sandbox,timer";
238 clock-frequency = <1000000>;
239 };
240
241 tpm {
242 compatible = "google,sandbox-tpm";
243 };
244
245 triangle {
246 compatible = "demo-shape";
247 colour = "cyan";
248 sides = <3>;
249 character = <83>;
250 light-gpios = <&gpio_a 2>, <&gpio_b 6 0>;
251 };
252
253 /* Needs to be available prior to relocation */
254 uart0: serial {
255 compatible = "sandbox,serial";
256 sandbox,text-colour = "cyan";
257 pinctrl-names = "default";
258 pinctrl-0 = <&pinctrl_serial0>;
259 };
260
261 usb@0 {
262 compatible = "sandbox,usb";
263 status = "disabled";
264 hub {
265 compatible = "sandbox,usb-hub";
266 #address-cells = <1>;
267 #size-cells = <0>;
268 flash-stick {
269 reg = <0>;
270 compatible = "sandbox,usb-flash";
271 };
272 };
273 };
274
275 usb@1 {
276 compatible = "sandbox,usb";
277 hub {
278 compatible = "usb-hub";
279 usb,device-class = <USB_CLASS_HUB>;
280 hub-emul {
281 compatible = "sandbox,usb-hub";
282 #address-cells = <1>;
283 #size-cells = <0>;
284 flash-stick {
285 reg = <0>;
286 compatible = "sandbox,usb-flash";
287 sandbox,filepath = "flash.bin";
288 };
289 };
290 };
291 };
292
293 usb@2 {
294 compatible = "sandbox,usb";
295 status = "disabled";
296 };
297
298 spmi: spmi@0 {
299 compatible = "sandbox,spmi";
300 #address-cells = <0x1>;
301 #size-cells = <0x1>;
302 pm8916@0 {
303 compatible = "qcom,spmi-pmic";
304 reg = <0x0 0x1>;
305 #address-cells = <0x1>;
306 #size-cells = <0x1>;
307
308 spmi_gpios: gpios@c000 {
309 compatible = "qcom,pm8916-gpio";
310 reg = <0xc000 0x400>;
311 gpio-controller;
312 gpio-count = <4>;
313 #gpio-cells = <2>;
314 gpio-bank-name="spmi";
315 };
316 };
317 };
318};
319
320#include "cros-ec-keyboard.dtsi"
321#include "sandbox_pmic.dtsi"