Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / bad1f6557bc191817127fe3dcb4e080667c33e4b / . / arch / arm / dts / msm8996.dtsi
blob: ec23b5c5e0248516dd8c5dcfe72a54ccebda1fa4 [file] [log] [blame]
Caleb Connollybad1f652023-11-15 16:25:44 +0000[diff] [blame^]1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
4 */
5
6#include <dt-bindings/interrupt-controller/arm-gic.h>
7#include <dt-bindings/clock/qcom,gcc-msm8996.h>
8#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
9#include <dt-bindings/clock/qcom,rpmcc.h>
10#include <dt-bindings/interconnect/qcom,msm8996.h>
11#include <dt-bindings/interconnect/qcom,msm8996-cbf.h>
12#include <dt-bindings/gpio/gpio.h>
13#include <dt-bindings/power/qcom-rpmpd.h>
14#include <dt-bindings/soc/qcom,apr.h>
15#include <dt-bindings/thermal/thermal.h>
16
17/ {
18 interrupt-parent = <&intc>;
19
20 #address-cells = <2>;
21 #size-cells = <2>;
22
23 chosen { };
24
25 clocks {
26 xo_board: xo-board {
27 compatible = "fixed-clock";
28 #clock-cells = <0>;
29 clock-frequency = <19200000>;
30 clock-output-names = "xo_board";
31 };
32
33 sleep_clk: sleep-clk {
34 compatible = "fixed-clock";
35 #clock-cells = <0>;
36 clock-frequency = <32764>;
37 clock-output-names = "sleep_clk";
38 };
39 };
40
41 cpus {
42 #address-cells = <2>;
43 #size-cells = <0>;
44
45 CPU0: cpu@0 {
46 device_type = "cpu";
47 compatible = "qcom,kryo";
48 reg = <0x0 0x0>;
49 enable-method = "psci";
50 cpu-idle-states = <&CPU_SLEEP_0>;
51 capacity-dmips-mhz = <1024>;
52 clocks = <&kryocc 0>;
53 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
54 operating-points-v2 = <&cluster0_opp>;
55 #cooling-cells = <2>;
56 next-level-cache = <&L2_0>;
57 L2_0: l2-cache {
58 compatible = "cache";
59 cache-level = <2>;
60 cache-unified;
61 };
62 };
63
64 CPU1: cpu@1 {
65 device_type = "cpu";
66 compatible = "qcom,kryo";
67 reg = <0x0 0x1>;
68 enable-method = "psci";
69 cpu-idle-states = <&CPU_SLEEP_0>;
70 capacity-dmips-mhz = <1024>;
71 clocks = <&kryocc 0>;
72 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
73 operating-points-v2 = <&cluster0_opp>;
74 #cooling-cells = <2>;
75 next-level-cache = <&L2_0>;
76 };
77
78 CPU2: cpu@100 {
79 device_type = "cpu";
80 compatible = "qcom,kryo";
81 reg = <0x0 0x100>;
82 enable-method = "psci";
83 cpu-idle-states = <&CPU_SLEEP_0>;
84 capacity-dmips-mhz = <1024>;
85 clocks = <&kryocc 1>;
86 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
87 operating-points-v2 = <&cluster1_opp>;
88 #cooling-cells = <2>;
89 next-level-cache = <&L2_1>;
90 L2_1: l2-cache {
91 compatible = "cache";
92 cache-level = <2>;
93 cache-unified;
94 };
95 };
96
97 CPU3: cpu@101 {
98 device_type = "cpu";
99 compatible = "qcom,kryo";
100 reg = <0x0 0x101>;
101 enable-method = "psci";
102 cpu-idle-states = <&CPU_SLEEP_0>;
103 capacity-dmips-mhz = <1024>;
104 clocks = <&kryocc 1>;
105 interconnects = <&cbf MASTER_CBF_M4M &cbf SLAVE_CBF_M4M>;
106 operating-points-v2 = <&cluster1_opp>;
107 #cooling-cells = <2>;
108 next-level-cache = <&L2_1>;
109 };
110
111 cpu-map {
112 cluster0 {
113 core0 {
114 cpu = <&CPU0>;
115 };
116
117 core1 {
118 cpu = <&CPU1>;
119 };
120 };
121
122 cluster1 {
123 core0 {
124 cpu = <&CPU2>;
125 };
126
127 core1 {
128 cpu = <&CPU3>;
129 };
130 };
131 };
132
133 idle-states {
134 entry-method = "psci";
135
136 CPU_SLEEP_0: cpu-sleep-0 {
137 compatible = "arm,idle-state";
138 idle-state-name = "standalone-power-collapse";
139 arm,psci-suspend-param = <0x00000004>;
140 entry-latency-us = <130>;
141 exit-latency-us = <80>;
142 min-residency-us = <300>;
143 };
144 };
145 };
146
147 cluster0_opp: opp-table-cluster0 {
148 compatible = "operating-points-v2-kryo-cpu";
149 nvmem-cells = <&speedbin_efuse>;
150 opp-shared;
151
152 /* Nominal fmax for now */
153 opp-307200000 {
154 opp-hz = /bits/ 64 <307200000>;
155 opp-supported-hw = <0xf>;
156 clock-latency-ns = <200000>;
157 opp-peak-kBps = <307200>;
158 };
159 opp-422400000 {
160 opp-hz = /bits/ 64 <422400000>;
161 opp-supported-hw = <0xf>;
162 clock-latency-ns = <200000>;
163 opp-peak-kBps = <307200>;
164 };
165 opp-480000000 {
166 opp-hz = /bits/ 64 <480000000>;
167 opp-supported-hw = <0xf>;
168 clock-latency-ns = <200000>;
169 opp-peak-kBps = <307200>;
170 };
171 opp-556800000 {
172 opp-hz = /bits/ 64 <556800000>;
173 opp-supported-hw = <0xf>;
174 clock-latency-ns = <200000>;
175 opp-peak-kBps = <307200>;
176 };
177 opp-652800000 {
178 opp-hz = /bits/ 64 <652800000>;
179 opp-supported-hw = <0xf>;
180 clock-latency-ns = <200000>;
181 opp-peak-kBps = <384000>;
182 };
183 opp-729600000 {
184 opp-hz = /bits/ 64 <729600000>;
185 opp-supported-hw = <0xf>;
186 clock-latency-ns = <200000>;
187 opp-peak-kBps = <460800>;
188 };
189 opp-844800000 {
190 opp-hz = /bits/ 64 <844800000>;
191 opp-supported-hw = <0xf>;
192 clock-latency-ns = <200000>;
193 opp-peak-kBps = <537600>;
194 };
195 opp-960000000 {
196 opp-hz = /bits/ 64 <960000000>;
197 opp-supported-hw = <0xf>;
198 clock-latency-ns = <200000>;
199 opp-peak-kBps = <672000>;
200 };
201 opp-1036800000 {
202 opp-hz = /bits/ 64 <1036800000>;
203 opp-supported-hw = <0xf>;
204 clock-latency-ns = <200000>;
205 opp-peak-kBps = <672000>;
206 };
207 opp-1113600000 {
208 opp-hz = /bits/ 64 <1113600000>;
209 opp-supported-hw = <0xf>;
210 clock-latency-ns = <200000>;
211 opp-peak-kBps = <825600>;
212 };
213 opp-1190400000 {
214 opp-hz = /bits/ 64 <1190400000>;
215 opp-supported-hw = <0xf>;
216 clock-latency-ns = <200000>;
217 opp-peak-kBps = <825600>;
218 };
219 opp-1228800000 {
220 opp-hz = /bits/ 64 <1228800000>;
221 opp-supported-hw = <0xf>;
222 clock-latency-ns = <200000>;
223 opp-peak-kBps = <902400>;
224 };
225 opp-1324800000 {
226 opp-hz = /bits/ 64 <1324800000>;
227 opp-supported-hw = <0xd>;
228 clock-latency-ns = <200000>;
229 opp-peak-kBps = <1056000>;
230 };
231 opp-1363200000 {
232 opp-hz = /bits/ 64 <1363200000>;
233 opp-supported-hw = <0x2>;
234 clock-latency-ns = <200000>;
235 opp-peak-kBps = <1132800>;
236 };
237 opp-1401600000 {
238 opp-hz = /bits/ 64 <1401600000>;
239 opp-supported-hw = <0xd>;
240 clock-latency-ns = <200000>;
241 opp-peak-kBps = <1132800>;
242 };
243 opp-1478400000 {
244 opp-hz = /bits/ 64 <1478400000>;
245 opp-supported-hw = <0x9>;
246 clock-latency-ns = <200000>;
247 opp-peak-kBps = <1190400>;
248 };
249 opp-1497600000 {
250 opp-hz = /bits/ 64 <1497600000>;
251 opp-supported-hw = <0x04>;
252 clock-latency-ns = <200000>;
253 opp-peak-kBps = <1305600>;
254 };
255 opp-1593600000 {
256 opp-hz = /bits/ 64 <1593600000>;
257 opp-supported-hw = <0x9>;
258 clock-latency-ns = <200000>;
259 opp-peak-kBps = <1382400>;
260 };
261 };
262
263 cluster1_opp: opp-table-cluster1 {
264 compatible = "operating-points-v2-kryo-cpu";
265 nvmem-cells = <&speedbin_efuse>;
266 opp-shared;
267
268 /* Nominal fmax for now */
269 opp-307200000 {
270 opp-hz = /bits/ 64 <307200000>;
271 opp-supported-hw = <0xf>;
272 clock-latency-ns = <200000>;
273 opp-peak-kBps = <307200>;
274 };
275 opp-403200000 {
276 opp-hz = /bits/ 64 <403200000>;
277 opp-supported-hw = <0xf>;
278 clock-latency-ns = <200000>;
279 opp-peak-kBps = <307200>;
280 };
281 opp-480000000 {
282 opp-hz = /bits/ 64 <480000000>;
283 opp-supported-hw = <0xf>;
284 clock-latency-ns = <200000>;
285 opp-peak-kBps = <307200>;
286 };
287 opp-556800000 {
288 opp-hz = /bits/ 64 <556800000>;
289 opp-supported-hw = <0xf>;
290 clock-latency-ns = <200000>;
291 opp-peak-kBps = <307200>;
292 };
293 opp-652800000 {
294 opp-hz = /bits/ 64 <652800000>;
295 opp-supported-hw = <0xf>;
296 clock-latency-ns = <200000>;
297 opp-peak-kBps = <307200>;
298 };
299 opp-729600000 {
300 opp-hz = /bits/ 64 <729600000>;
301 opp-supported-hw = <0xf>;
302 clock-latency-ns = <200000>;
303 opp-peak-kBps = <307200>;
304 };
305 opp-806400000 {
306 opp-hz = /bits/ 64 <806400000>;
307 opp-supported-hw = <0xf>;
308 clock-latency-ns = <200000>;
309 opp-peak-kBps = <384000>;
310 };
311 opp-883200000 {
312 opp-hz = /bits/ 64 <883200000>;
313 opp-supported-hw = <0xf>;
314 clock-latency-ns = <200000>;
315 opp-peak-kBps = <460800>;
316 };
317 opp-940800000 {
318 opp-hz = /bits/ 64 <940800000>;
319 opp-supported-hw = <0xf>;
320 clock-latency-ns = <200000>;
321 opp-peak-kBps = <537600>;
322 };
323 opp-1036800000 {
324 opp-hz = /bits/ 64 <1036800000>;
325 opp-supported-hw = <0xf>;
326 clock-latency-ns = <200000>;
327 opp-peak-kBps = <595200>;
328 };
329 opp-1113600000 {
330 opp-hz = /bits/ 64 <1113600000>;
331 opp-supported-hw = <0xf>;
332 clock-latency-ns = <200000>;
333 opp-peak-kBps = <672000>;
334 };
335 opp-1190400000 {
336 opp-hz = /bits/ 64 <1190400000>;
337 opp-supported-hw = <0xf>;
338 clock-latency-ns = <200000>;
339 opp-peak-kBps = <672000>;
340 };
341 opp-1248000000 {
342 opp-hz = /bits/ 64 <1248000000>;
343 opp-supported-hw = <0xf>;
344 clock-latency-ns = <200000>;
345 opp-peak-kBps = <748800>;
346 };
347 opp-1324800000 {
348 opp-hz = /bits/ 64 <1324800000>;
349 opp-supported-hw = <0xf>;
350 clock-latency-ns = <200000>;
351 opp-peak-kBps = <825600>;
352 };
353 opp-1401600000 {
354 opp-hz = /bits/ 64 <1401600000>;
355 opp-supported-hw = <0xf>;
356 clock-latency-ns = <200000>;
357 opp-peak-kBps = <902400>;
358 };
359 opp-1478400000 {
360 opp-hz = /bits/ 64 <1478400000>;
361 opp-supported-hw = <0xf>;
362 clock-latency-ns = <200000>;
363 opp-peak-kBps = <979200>;
364 };
365 opp-1555200000 {
366 opp-hz = /bits/ 64 <1555200000>;
367 opp-supported-hw = <0xf>;
368 clock-latency-ns = <200000>;
369 opp-peak-kBps = <1056000>;
370 };
371 opp-1632000000 {
372 opp-hz = /bits/ 64 <1632000000>;
373 opp-supported-hw = <0xf>;
374 clock-latency-ns = <200000>;
375 opp-peak-kBps = <1190400>;
376 };
377 opp-1708800000 {
378 opp-hz = /bits/ 64 <1708800000>;
379 opp-supported-hw = <0xf>;
380 clock-latency-ns = <200000>;
381 opp-peak-kBps = <1228800>;
382 };
383 opp-1785600000 {
384 opp-hz = /bits/ 64 <1785600000>;
385 opp-supported-hw = <0xf>;
386 clock-latency-ns = <200000>;
387 opp-peak-kBps = <1305600>;
388 };
389 opp-1804800000 {
390 opp-hz = /bits/ 64 <1804800000>;
391 opp-supported-hw = <0xe>;
392 clock-latency-ns = <200000>;
393 opp-peak-kBps = <1305600>;
394 };
395 opp-1824000000 {
396 opp-hz = /bits/ 64 <1824000000>;
397 opp-supported-hw = <0x1>;
398 clock-latency-ns = <200000>;
399 opp-peak-kBps = <1382400>;
400 };
401 opp-1900800000 {
402 opp-hz = /bits/ 64 <1900800000>;
403 opp-supported-hw = <0x4>;
404 clock-latency-ns = <200000>;
405 opp-peak-kBps = <1305600>;
406 };
407 opp-1920000000 {
408 opp-hz = /bits/ 64 <1920000000>;
409 opp-supported-hw = <0x1>;
410 clock-latency-ns = <200000>;
411 opp-peak-kBps = <1459200>;
412 };
413 opp-1996800000 {
414 opp-hz = /bits/ 64 <1996800000>;
415 opp-supported-hw = <0x1>;
416 clock-latency-ns = <200000>;
417 opp-peak-kBps = <1593600>;
418 };
419 opp-2073600000 {
420 opp-hz = /bits/ 64 <2073600000>;
421 opp-supported-hw = <0x1>;
422 clock-latency-ns = <200000>;
423 opp-peak-kBps = <1593600>;
424 };
425 opp-2150400000 {
426 opp-hz = /bits/ 64 <2150400000>;
427 opp-supported-hw = <0x1>;
428 clock-latency-ns = <200000>;
429 opp-peak-kBps = <1593600>;
430 };
431 };
432
433 firmware {
434 scm {
435 compatible = "qcom,scm-msm8996", "qcom,scm";
436 qcom,dload-mode = <&tcsr_2 0x13000>;
437 };
438 };
439
440 memory@80000000 {
441 device_type = "memory";
442 /* We expect the bootloader to fill in the reg */
443 reg = <0x0 0x80000000 0x0 0x0>;
444 };
445
446 psci {
447 compatible = "arm,psci-1.0";
448 method = "smc";
449 };
450
451 rpm: remoteproc {
452 compatible = "qcom,msm8996-rpm-proc", "qcom,rpm-proc";
453
454 glink-rpm {
455 compatible = "qcom,glink-rpm";
456 interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
457 qcom,rpm-msg-ram = <&rpm_msg_ram>;
458 mboxes = <&apcs_glb 0>;
459
460 rpm_requests: rpm-requests {
461 compatible = "qcom,rpm-msm8996";
462 qcom,glink-channels = "rpm_requests";
463
464 rpmcc: clock-controller {
465 compatible = "qcom,rpmcc-msm8996", "qcom,rpmcc";
466 #clock-cells = <1>;
467 clocks = <&xo_board>;
468 clock-names = "xo";
469 };
470
471 rpmpd: power-controller {
472 compatible = "qcom,msm8996-rpmpd";
473 #power-domain-cells = <1>;
474 operating-points-v2 = <&rpmpd_opp_table>;
475
476 rpmpd_opp_table: opp-table {
477 compatible = "operating-points-v2";
478
479 rpmpd_opp1: opp1 {
480 opp-level = <1>;
481 };
482
483 rpmpd_opp2: opp2 {
484 opp-level = <2>;
485 };
486
487 rpmpd_opp3: opp3 {
488 opp-level = <3>;
489 };
490
491 rpmpd_opp4: opp4 {
492 opp-level = <4>;
493 };
494
495 rpmpd_opp5: opp5 {
496 opp-level = <5>;
497 };
498
499 rpmpd_opp6: opp6 {
500 opp-level = <6>;
501 };
502 };
503 };
504 };
505 };
506 };
507
508 reserved-memory {
509 #address-cells = <2>;
510 #size-cells = <2>;
511 ranges;
512
513 hyp_mem: memory@85800000 {
514 reg = <0x0 0x85800000 0x0 0x600000>;
515 no-map;
516 };
517
518 xbl_mem: memory@85e00000 {
519 reg = <0x0 0x85e00000 0x0 0x200000>;
520 no-map;
521 };
522
523 smem_mem: smem-mem@86000000 {
524 reg = <0x0 0x86000000 0x0 0x200000>;
525 no-map;
526 };
527
528 tz_mem: memory@86200000 {
529 reg = <0x0 0x86200000 0x0 0x2600000>;
530 no-map;
531 };
532
533 rmtfs_mem: rmtfs {
534 compatible = "qcom,rmtfs-mem";
535
536 size = <0x0 0x200000>;
537 alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
538 no-map;
539
540 qcom,client-id = <1>;
541 qcom,vmid = <15>;
542 };
543
544 mpss_mem: mpss@88800000 {
545 reg = <0x0 0x88800000 0x0 0x6200000>;
546 no-map;
547 };
548
549 adsp_mem: adsp@8ea00000 {
550 reg = <0x0 0x8ea00000 0x0 0x1b00000>;
551 no-map;
552 };
553
554 slpi_mem: slpi@90500000 {
555 reg = <0x0 0x90500000 0x0 0xa00000>;
556 no-map;
557 };
558
559 gpu_mem: gpu@90f00000 {
560 compatible = "shared-dma-pool";
561 reg = <0x0 0x90f00000 0x0 0x100000>;
562 no-map;
563 };
564
565 venus_mem: venus@91000000 {
566 reg = <0x0 0x91000000 0x0 0x500000>;
567 no-map;
568 };
569
570 mba_mem: mba@91500000 {
571 reg = <0x0 0x91500000 0x0 0x200000>;
572 no-map;
573 };
574
575 mdata_mem: mpss-metadata {
576 alloc-ranges = <0x0 0xa0000000 0x0 0x20000000>;
577 size = <0x0 0x4000>;
578 no-map;
579 };
580 };
581
582 smem {
583 compatible = "qcom,smem";
584 memory-region = <&smem_mem>;
585 hwlocks = <&tcsr_mutex 3>;
586 };
587
588 smp2p-adsp {
589 compatible = "qcom,smp2p";
590 qcom,smem = <443>, <429>;
591
592 interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
593
594 mboxes = <&apcs_glb 10>;
595
596 qcom,local-pid = <0>;
597 qcom,remote-pid = <2>;
598
599 adsp_smp2p_out: master-kernel {
600 qcom,entry-name = "master-kernel";
601 #qcom,smem-state-cells = <1>;
602 };
603
604 adsp_smp2p_in: slave-kernel {
605 qcom,entry-name = "slave-kernel";
606
607 interrupt-controller;
608 #interrupt-cells = <2>;
609 };
610 };
611
612 smp2p-mpss {
613 compatible = "qcom,smp2p";
614 qcom,smem = <435>, <428>;
615
616 interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
617
618 mboxes = <&apcs_glb 14>;
619
620 qcom,local-pid = <0>;
621 qcom,remote-pid = <1>;
622
623 mpss_smp2p_out: master-kernel {
624 qcom,entry-name = "master-kernel";
625 #qcom,smem-state-cells = <1>;
626 };
627
628 mpss_smp2p_in: slave-kernel {
629 qcom,entry-name = "slave-kernel";
630
631 interrupt-controller;
632 #interrupt-cells = <2>;
633 };
634 };
635
636 smp2p-slpi {
637 compatible = "qcom,smp2p";
638 qcom,smem = <481>, <430>;
639
640 interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
641
642 mboxes = <&apcs_glb 26>;
643
644 qcom,local-pid = <0>;
645 qcom,remote-pid = <3>;
646
647 slpi_smp2p_out: master-kernel {
648 qcom,entry-name = "master-kernel";
649 #qcom,smem-state-cells = <1>;
650 };
651
652 slpi_smp2p_in: slave-kernel {
653 qcom,entry-name = "slave-kernel";
654
655 interrupt-controller;
656 #interrupt-cells = <2>;
657 };
658 };
659
660 soc: soc {
661 #address-cells = <1>;
662 #size-cells = <1>;
663 ranges = <0 0 0 0xffffffff>;
664 compatible = "simple-bus";
665
666 pcie_phy: phy-wrapper@34000 {
667 compatible = "qcom,msm8996-qmp-pcie-phy";
668 reg = <0x00034000 0x488>;
669 #address-cells = <1>;
670 #size-cells = <1>;
671 ranges = <0x0 0x00034000 0x4000>;
672
673 clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
674 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
675 <&gcc GCC_PCIE_CLKREF_CLK>;
676 clock-names = "aux", "cfg_ahb", "ref";
677
678 resets = <&gcc GCC_PCIE_PHY_BCR>,
679 <&gcc GCC_PCIE_PHY_COM_BCR>,
680 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
681 reset-names = "phy", "common", "cfg";
682
683 status = "disabled";
684
685 pciephy_0: phy@1000 {
686 reg = <0x1000 0x130>,
687 <0x1200 0x200>,
688 <0x1400 0x1dc>;
689
690 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
691 clock-names = "pipe0";
692 resets = <&gcc GCC_PCIE_0_PHY_BCR>;
693 reset-names = "lane0";
694
695 #clock-cells = <0>;
696 clock-output-names = "pcie_0_pipe_clk_src";
697
698 #phy-cells = <0>;
699 };
700
701 pciephy_1: phy@2000 {
702 reg = <0x2000 0x130>,
703 <0x2200 0x200>,
704 <0x2400 0x1dc>;
705
706 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
707 clock-names = "pipe1";
708 resets = <&gcc GCC_PCIE_1_PHY_BCR>;
709 reset-names = "lane1";
710
711 #clock-cells = <0>;
712 clock-output-names = "pcie_1_pipe_clk_src";
713
714 #phy-cells = <0>;
715 };
716
717 pciephy_2: phy@3000 {
718 reg = <0x3000 0x130>,
719 <0x3200 0x200>,
720 <0x3400 0x1dc>;
721
722 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
723 clock-names = "pipe2";
724 resets = <&gcc GCC_PCIE_2_PHY_BCR>;
725 reset-names = "lane2";
726
727 #clock-cells = <0>;
728 clock-output-names = "pcie_2_pipe_clk_src";
729
730 #phy-cells = <0>;
731 };
732 };
733
734 rpm_msg_ram: sram@68000 {
735 compatible = "qcom,rpm-msg-ram";
736 reg = <0x00068000 0x6000>;
737 };
738
739 qfprom@74000 {
740 compatible = "qcom,msm8996-qfprom", "qcom,qfprom";
741 reg = <0x00074000 0x8ff>;
742 #address-cells = <1>;
743 #size-cells = <1>;
744
745 qusb2p_hstx_trim: hstx_trim@24e {
746 reg = <0x24e 0x2>;
747 bits = <5 4>;
748 };
749
750 qusb2s_hstx_trim: hstx_trim@24f {
751 reg = <0x24f 0x1>;
752 bits = <1 4>;
753 };
754
755 speedbin_efuse: speedbin@133 {
756 reg = <0x133 0x1>;
757 bits = <5 3>;
758 };
759 };
760
761 rng: rng@83000 {
762 compatible = "qcom,prng-ee";
763 reg = <0x00083000 0x1000>;
764 clocks = <&gcc GCC_PRNG_AHB_CLK>;
765 clock-names = "core";
766 };
767
768 gcc: clock-controller@300000 {
769 compatible = "qcom,gcc-msm8996";
770 #clock-cells = <1>;
771 #reset-cells = <1>;
772 #power-domain-cells = <1>;
773 reg = <0x00300000 0x90000>;
774
775 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
776 <&rpmcc RPM_SMD_LN_BB_CLK>,
777 <&sleep_clk>,
778 <&pciephy_0>,
779 <&pciephy_1>,
780 <&pciephy_2>,
781 <&ssusb_phy_0>,
782 <&ufsphy_lane 0>,
783 <&ufsphy_lane 1>,
784 <&ufsphy_lane 2>;
785 clock-names = "cxo",
786 "cxo2",
787 "sleep_clk",
788 "pcie_0_pipe_clk_src",
789 "pcie_1_pipe_clk_src",
790 "pcie_2_pipe_clk_src",
791 "usb3_phy_pipe_clk_src",
792 "ufs_rx_symbol_0_clk_src",
793 "ufs_rx_symbol_1_clk_src",
794 "ufs_tx_symbol_0_clk_src";
795 };
796
797 bimc: interconnect@408000 {
798 compatible = "qcom,msm8996-bimc";
799 reg = <0x00408000 0x5a000>;
800 #interconnect-cells = <1>;
801 clock-names = "bus", "bus_a";
802 clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
803 <&rpmcc RPM_SMD_BIMC_A_CLK>;
804 };
805
806 tsens0: thermal-sensor@4a9000 {
807 compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
808 reg = <0x004a9000 0x1000>, /* TM */
809 <0x004a8000 0x1000>; /* SROT */
810 #qcom,sensors = <13>;
811 interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
812 <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
813 interrupt-names = "uplow", "critical";
814 #thermal-sensor-cells = <1>;
815 };
816
817 tsens1: thermal-sensor@4ad000 {
818 compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
819 reg = <0x004ad000 0x1000>, /* TM */
820 <0x004ac000 0x1000>; /* SROT */
821 #qcom,sensors = <8>;
822 interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
823 <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
824 interrupt-names = "uplow", "critical";
825 #thermal-sensor-cells = <1>;
826 };
827
828 cryptobam: dma-controller@644000 {
829 compatible = "qcom,bam-v1.7.0";
830 reg = <0x00644000 0x24000>;
831 interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
832 clocks = <&gcc GCC_CE1_CLK>;
833 clock-names = "bam_clk";
834 #dma-cells = <1>;
835 qcom,ee = <0>;
836 qcom,controlled-remotely;
837 };
838
839 crypto: crypto@67a000 {
840 compatible = "qcom,crypto-v5.4";
841 reg = <0x0067a000 0x6000>;
842 clocks = <&gcc GCC_CE1_AHB_CLK>,
843 <&gcc GCC_CE1_AXI_CLK>,
844 <&gcc GCC_CE1_CLK>;
845 clock-names = "iface", "bus", "core";
846 dmas = <&cryptobam 6>, <&cryptobam 7>;
847 dma-names = "rx", "tx";
848 };
849
850 cnoc: interconnect@500000 {
851 compatible = "qcom,msm8996-cnoc";
852 reg = <0x00500000 0x1000>;
853 #interconnect-cells = <1>;
854 clock-names = "bus", "bus_a";
855 clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
856 <&rpmcc RPM_SMD_CNOC_A_CLK>;
857 };
858
859 snoc: interconnect@524000 {
860 compatible = "qcom,msm8996-snoc";
861 reg = <0x00524000 0x1c000>;
862 #interconnect-cells = <1>;
863 clock-names = "bus", "bus_a";
864 clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
865 <&rpmcc RPM_SMD_SNOC_A_CLK>;
866 };
867
868 a0noc: interconnect@543000 {
869 compatible = "qcom,msm8996-a0noc";
870 reg = <0x00543000 0x6000>;
871 #interconnect-cells = <1>;
872 clock-names = "aggre0_snoc_axi",
873 "aggre0_cnoc_ahb",
874 "aggre0_noc_mpu_cfg";
875 clocks = <&gcc GCC_AGGRE0_SNOC_AXI_CLK>,
876 <&gcc GCC_AGGRE0_CNOC_AHB_CLK>,
877 <&gcc GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK>;
878 power-domains = <&gcc AGGRE0_NOC_GDSC>;
879 };
880
881 a1noc: interconnect@562000 {
882 compatible = "qcom,msm8996-a1noc";
883 reg = <0x00562000 0x5000>;
884 #interconnect-cells = <1>;
885 clock-names = "bus", "bus_a";
886 clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
887 <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
888 };
889
890 a2noc: interconnect@583000 {
891 compatible = "qcom,msm8996-a2noc";
892 reg = <0x00583000 0x7000>;
893 #interconnect-cells = <1>;
894 clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
895 clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
896 <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
897 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
898 <&gcc GCC_UFS_AXI_CLK>;
899 };
900
901 mnoc: interconnect@5a4000 {
902 compatible = "qcom,msm8996-mnoc";
903 reg = <0x005a4000 0x1c000>;
904 #interconnect-cells = <1>;
905 clock-names = "bus", "bus_a", "iface";
906 clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
907 <&rpmcc RPM_SMD_MMAXI_A_CLK>,
908 <&mmcc AHB_CLK_SRC>;
909 };
910
911 pnoc: interconnect@5c0000 {
912 compatible = "qcom,msm8996-pnoc";
913 reg = <0x005c0000 0x3000>;
914 #interconnect-cells = <1>;
915 clock-names = "bus", "bus_a";
916 clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
917 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
918 };
919
920 tcsr_mutex: hwlock@740000 {
921 compatible = "qcom,tcsr-mutex";
922 reg = <0x00740000 0x20000>;
923 #hwlock-cells = <1>;
924 };
925
926 tcsr_1: syscon@760000 {
927 compatible = "qcom,tcsr-msm8996", "syscon";
928 reg = <0x00760000 0x20000>;
929 };
930
931 tcsr_2: syscon@7a0000 {
932 compatible = "qcom,tcsr-msm8996", "syscon";
933 reg = <0x007a0000 0x18000>;
934 };
935
936 mmcc: clock-controller@8c0000 {
937 compatible = "qcom,mmcc-msm8996";
938 #clock-cells = <1>;
939 #reset-cells = <1>;
940 #power-domain-cells = <1>;
941 reg = <0x008c0000 0x40000>;
942 clocks = <&xo_board>,
943 <&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
944 <&gcc GPLL0>,
945 <&dsi0_phy 1>,
946 <&dsi0_phy 0>,
947 <&dsi1_phy 1>,
948 <&dsi1_phy 0>,
949 <&hdmi_phy>;
950 clock-names = "xo",
951 "gcc_mmss_noc_cfg_ahb_clk",
952 "gpll0",
953 "dsi0pll",
954 "dsi0pllbyte",
955 "dsi1pll",
956 "dsi1pllbyte",
957 "hdmipll";
958 assigned-clocks = <&mmcc MMPLL9_PLL>,
959 <&mmcc MMPLL1_PLL>,
960 <&mmcc MMPLL3_PLL>,
961 <&mmcc MMPLL4_PLL>,
962 <&mmcc MMPLL5_PLL>;
963 assigned-clock-rates = <624000000>,
964 <810000000>,
965 <980000000>,
966 <960000000>,
967 <825000000>;
968 };
969
970 mdss: display-subsystem@900000 {
971 compatible = "qcom,mdss";
972
973 reg = <0x00900000 0x1000>,
974 <0x009b0000 0x1040>,
975 <0x009b8000 0x1040>;
976 reg-names = "mdss_phys",
977 "vbif_phys",
978 "vbif_nrt_phys";
979
980 power-domains = <&mmcc MDSS_GDSC>;
981 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
982
983 interrupt-controller;
984 #interrupt-cells = <1>;
985
986 clocks = <&mmcc MDSS_AHB_CLK>,
987 <&mmcc MDSS_MDP_CLK>;
988 clock-names = "iface", "core";
989
990 #address-cells = <1>;
991 #size-cells = <1>;
992 ranges;
993
994 status = "disabled";
995
996 mdp: display-controller@901000 {
997 compatible = "qcom,msm8996-mdp5", "qcom,mdp5";
998 reg = <0x00901000 0x90000>;
999 reg-names = "mdp_phys";
1000
1001 interrupt-parent = <&mdss>;
1002 interrupts = <0>;
1003
1004 clocks = <&mmcc MDSS_AHB_CLK>,
1005 <&mmcc MDSS_AXI_CLK>,
1006 <&mmcc MDSS_MDP_CLK>,
1007 <&mmcc SMMU_MDP_AXI_CLK>,
1008 <&mmcc MDSS_VSYNC_CLK>;
1009 clock-names = "iface",
1010 "bus",
1011 "core",
1012 "iommu",
1013 "vsync";
1014
1015 iommus = <&mdp_smmu 0>;
1016
1017 assigned-clocks = <&mmcc MDSS_MDP_CLK>,
1018 <&mmcc MDSS_VSYNC_CLK>;
1019 assigned-clock-rates = <300000000>,
1020 <19200000>;
1021
1022 interconnects = <&mnoc MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>,
1023 <&mnoc MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>,
1024 <&mnoc MASTER_ROTATOR &bimc SLAVE_EBI_CH0>;
1025 interconnect-names = "mdp0-mem", "mdp1-mem", "rotator-mem";
1026
1027 ports {
1028 #address-cells = <1>;
1029 #size-cells = <0>;
1030
1031 port@0 {
1032 reg = <0>;
1033 mdp5_intf3_out: endpoint {
1034 remote-endpoint = <&hdmi_in>;
1035 };
1036 };
1037
1038 port@1 {
1039 reg = <1>;
1040 mdp5_intf1_out: endpoint {
1041 remote-endpoint = <&dsi0_in>;
1042 };
1043 };
1044
1045 port@2 {
1046 reg = <2>;
1047 mdp5_intf2_out: endpoint {
1048 remote-endpoint = <&dsi1_in>;
1049 };
1050 };
1051 };
1052 };
1053
1054 dsi0: dsi@994000 {
1055 compatible = "qcom,msm8996-dsi-ctrl",
1056 "qcom,mdss-dsi-ctrl";
1057 reg = <0x00994000 0x400>;
1058 reg-names = "dsi_ctrl";
1059
1060 interrupt-parent = <&mdss>;
1061 interrupts = <4>;
1062
1063 clocks = <&mmcc MDSS_MDP_CLK>,
1064 <&mmcc MDSS_BYTE0_CLK>,
1065 <&mmcc MDSS_AHB_CLK>,
1066 <&mmcc MDSS_AXI_CLK>,
1067 <&mmcc MMSS_MISC_AHB_CLK>,
1068 <&mmcc MDSS_PCLK0_CLK>,
1069 <&mmcc MDSS_ESC0_CLK>;
1070 clock-names = "mdp_core",
1071 "byte",
1072 "iface",
1073 "bus",
1074 "core_mmss",
1075 "pixel",
1076 "core";
1077 assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
1078 assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
1079
1080 phys = <&dsi0_phy>;
1081 status = "disabled";
1082
1083 #address-cells = <1>;
1084 #size-cells = <0>;
1085
1086 ports {
1087 #address-cells = <1>;
1088 #size-cells = <0>;
1089
1090 port@0 {
1091 reg = <0>;
1092 dsi0_in: endpoint {
1093 remote-endpoint = <&mdp5_intf1_out>;
1094 };
1095 };
1096
1097 port@1 {
1098 reg = <1>;
1099 dsi0_out: endpoint {
1100 };
1101 };
1102 };
1103 };
1104
1105 dsi0_phy: phy@994400 {
1106 compatible = "qcom,dsi-phy-14nm";
1107 reg = <0x00994400 0x100>,
1108 <0x00994500 0x300>,
1109 <0x00994800 0x188>;
1110 reg-names = "dsi_phy",
1111 "dsi_phy_lane",
1112 "dsi_pll";
1113
1114 #clock-cells = <1>;
1115 #phy-cells = <0>;
1116
1117 clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
1118 clock-names = "iface", "ref";
1119 status = "disabled";
1120 };
1121
1122 dsi1: dsi@996000 {
1123 compatible = "qcom,msm8996-dsi-ctrl",
1124 "qcom,mdss-dsi-ctrl";
1125 reg = <0x00996000 0x400>;
1126 reg-names = "dsi_ctrl";
1127
1128 interrupt-parent = <&mdss>;
1129 interrupts = <4>;
1130
1131 clocks = <&mmcc MDSS_MDP_CLK>,
1132 <&mmcc MDSS_BYTE1_CLK>,
1133 <&mmcc MDSS_AHB_CLK>,
1134 <&mmcc MDSS_AXI_CLK>,
1135 <&mmcc MMSS_MISC_AHB_CLK>,
1136 <&mmcc MDSS_PCLK1_CLK>,
1137 <&mmcc MDSS_ESC1_CLK>;
1138 clock-names = "mdp_core",
1139 "byte",
1140 "iface",
1141 "bus",
1142 "core_mmss",
1143 "pixel",
1144 "core";
1145 assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
1146 assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
1147
1148 phys = <&dsi1_phy>;
1149 status = "disabled";
1150
1151 #address-cells = <1>;
1152 #size-cells = <0>;
1153
1154 ports {
1155 #address-cells = <1>;
1156 #size-cells = <0>;
1157
1158 port@0 {
1159 reg = <0>;
1160 dsi1_in: endpoint {
1161 remote-endpoint = <&mdp5_intf2_out>;
1162 };
1163 };
1164
1165 port@1 {
1166 reg = <1>;
1167 dsi1_out: endpoint {
1168 };
1169 };
1170 };
1171 };
1172
1173 dsi1_phy: phy@996400 {
1174 compatible = "qcom,dsi-phy-14nm";
1175 reg = <0x00996400 0x100>,
1176 <0x00996500 0x300>,
1177 <0x00996800 0x188>;
1178 reg-names = "dsi_phy",
1179 "dsi_phy_lane",
1180 "dsi_pll";
1181
1182 #clock-cells = <1>;
1183 #phy-cells = <0>;
1184
1185 clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
1186 clock-names = "iface", "ref";
1187 status = "disabled";
1188 };
1189
1190 hdmi: hdmi-tx@9a0000 {
1191 compatible = "qcom,hdmi-tx-8996";
1192 reg = <0x009a0000 0x50c>,
1193 <0x00070000 0x6158>,
1194 <0x009e0000 0xfff>;
1195 reg-names = "core_physical",
1196 "qfprom_physical",
1197 "hdcp_physical";
1198
1199 interrupt-parent = <&mdss>;
1200 interrupts = <8>;
1201
1202 clocks = <&mmcc MDSS_MDP_CLK>,
1203 <&mmcc MDSS_AHB_CLK>,
1204 <&mmcc MDSS_HDMI_CLK>,
1205 <&mmcc MDSS_HDMI_AHB_CLK>,
1206 <&mmcc MDSS_EXTPCLK_CLK>;
1207 clock-names =
1208 "mdp_core",
1209 "iface",
1210 "core",
1211 "alt_iface",
1212 "extp";
1213
1214 phys = <&hdmi_phy>;
1215 #sound-dai-cells = <1>;
1216
1217 status = "disabled";
1218
1219 ports {
1220 #address-cells = <1>;
1221 #size-cells = <0>;
1222
1223 port@0 {
1224 reg = <0>;
1225 hdmi_in: endpoint {
1226 remote-endpoint = <&mdp5_intf3_out>;
1227 };
1228 };
1229 };
1230 };
1231
1232 hdmi_phy: phy@9a0600 {
1233 #phy-cells = <0>;
1234 compatible = "qcom,hdmi-phy-8996";
1235 reg = <0x009a0600 0x1c4>,
1236 <0x009a0a00 0x124>,
1237 <0x009a0c00 0x124>,
1238 <0x009a0e00 0x124>,
1239 <0x009a1000 0x124>,
1240 <0x009a1200 0x0c8>;
1241 reg-names = "hdmi_pll",
1242 "hdmi_tx_l0",
1243 "hdmi_tx_l1",
1244 "hdmi_tx_l2",
1245 "hdmi_tx_l3",
1246 "hdmi_phy";
1247
1248 clocks = <&mmcc MDSS_AHB_CLK>,
1249 <&gcc GCC_HDMI_CLKREF_CLK>,
1250 <&xo_board>;
1251 clock-names = "iface",
1252 "ref",
1253 "xo";
1254
1255 #clock-cells = <0>;
1256
1257 status = "disabled";
1258 };
1259 };
1260
1261 gpu: gpu@b00000 {
1262 compatible = "qcom,adreno-530.2", "qcom,adreno";
1263
1264 reg = <0x00b00000 0x3f000>;
1265 reg-names = "kgsl_3d0_reg_memory";
1266
1267 interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
1268
1269 clocks = <&mmcc GPU_GX_GFX3D_CLK>,
1270 <&mmcc GPU_AHB_CLK>,
1271 <&mmcc GPU_GX_RBBMTIMER_CLK>,
1272 <&gcc GCC_BIMC_GFX_CLK>,
1273 <&gcc GCC_MMSS_BIMC_GFX_CLK>;
1274
1275 clock-names = "core",
1276 "iface",
1277 "rbbmtimer",
1278 "mem",
1279 "mem_iface";
1280
1281 interconnects = <&bimc MASTER_GRAPHICS_3D &bimc SLAVE_EBI_CH0>;
1282 interconnect-names = "gfx-mem";
1283
1284 power-domains = <&mmcc GPU_GX_GDSC>;
1285 iommus = <&adreno_smmu 0>;
1286
1287 nvmem-cells = <&speedbin_efuse>;
1288 nvmem-cell-names = "speed_bin";
1289
1290 operating-points-v2 = <&gpu_opp_table>;
1291
1292 status = "disabled";
1293
1294 #cooling-cells = <2>;
1295
1296 gpu_opp_table: opp-table {
1297 compatible = "operating-points-v2";
1298
1299 /*
1300 * 624Mhz is only available on speed bins 0 and 3.
1301 * 560Mhz is only available on speed bins 0, 2 and 3.
1302 * All the rest are available on all bins of the hardware.
1303 */
1304 opp-624000000 {
1305 opp-hz = /bits/ 64 <624000000>;
1306 opp-supported-hw = <0x09>;
1307 };
1308 opp-560000000 {
1309 opp-hz = /bits/ 64 <560000000>;
1310 opp-supported-hw = <0x0d>;
1311 };
1312 opp-510000000 {
1313 opp-hz = /bits/ 64 <510000000>;
1314 opp-supported-hw = <0xff>;
1315 };
1316 opp-401800000 {
1317 opp-hz = /bits/ 64 <401800000>;
1318 opp-supported-hw = <0xff>;
1319 };
1320 opp-315000000 {
1321 opp-hz = /bits/ 64 <315000000>;
1322 opp-supported-hw = <0xff>;
1323 };
1324 opp-214000000 {
1325 opp-hz = /bits/ 64 <214000000>;
1326 opp-supported-hw = <0xff>;
1327 };
1328 opp-133000000 {
1329 opp-hz = /bits/ 64 <133000000>;
1330 opp-supported-hw = <0xff>;
1331 };
1332 };
1333
1334 zap-shader {
1335 memory-region = <&gpu_mem>;
1336 };
1337 };
1338
1339 tlmm: pinctrl@1010000 {
1340 compatible = "qcom,msm8996-pinctrl";
1341 reg = <0x01010000 0x300000>;
1342 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
1343 gpio-controller;
1344 gpio-ranges = <&tlmm 0 0 150>;
1345 #gpio-cells = <2>;
1346 interrupt-controller;
1347 #interrupt-cells = <2>;
1348
1349 blsp1_spi1_default: blsp1-spi1-default-state {
1350 spi-pins {
1351 pins = "gpio0", "gpio1", "gpio3";
1352 function = "blsp_spi1";
1353 drive-strength = <12>;
1354 bias-disable;
1355 };
1356
1357 cs-pins {
1358 pins = "gpio2";
1359 function = "gpio";
1360 drive-strength = <16>;
1361 bias-disable;
1362 output-high;
1363 };
1364 };
1365
1366 blsp1_spi1_sleep: blsp1-spi1-sleep-state {
1367 pins = "gpio0", "gpio1", "gpio2", "gpio3";
1368 function = "gpio";
1369 drive-strength = <2>;
1370 bias-pull-down;
1371 };
1372
1373 blsp2_uart2_2pins_default: blsp2-uart2-2pins-state {
1374 pins = "gpio4", "gpio5";
1375 function = "blsp_uart8";
1376 drive-strength = <16>;
1377 bias-disable;
1378 };
1379
1380 blsp2_uart2_2pins_sleep: blsp2-uart2-2pins-sleep-state {
1381 pins = "gpio4", "gpio5";
1382 function = "gpio";
1383 drive-strength = <2>;
1384 bias-disable;
1385 };
1386
1387 blsp2_i2c2_default: blsp2-i2c2-state {
1388 pins = "gpio6", "gpio7";
1389 function = "blsp_i2c8";
1390 drive-strength = <16>;
1391 bias-disable;
1392 };
1393
1394 blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
1395 pins = "gpio6", "gpio7";
1396 function = "gpio";
1397 drive-strength = <2>;
1398 bias-disable;
1399 };
1400
1401 blsp1_i2c6_default: blsp1-i2c6-state {
1402 pins = "gpio27", "gpio28";
1403 function = "blsp_i2c6";
1404 drive-strength = <16>;
1405 bias-disable;
1406 };
1407
1408 blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
1409 pins = "gpio27", "gpio28";
1410 function = "gpio";
1411 drive-strength = <2>;
1412 bias-pull-up;
1413 };
1414
1415 cci0_default: cci0-default-state {
1416 pins = "gpio17", "gpio18";
1417 function = "cci_i2c";
1418 drive-strength = <16>;
1419 bias-disable;
1420 };
1421
1422 camera0_state_on:
1423 camera_rear_default: camera-rear-default-state {
1424 camera0_mclk: mclk0-pins {
1425 pins = "gpio13";
1426 function = "cam_mclk";
1427 drive-strength = <16>;
1428 bias-disable;
1429 };
1430
1431 camera0_rst: rst-pins {
1432 pins = "gpio25";
1433 function = "gpio";
1434 drive-strength = <16>;
1435 bias-disable;
1436 };
1437
1438 camera0_pwdn: pwdn-pins {
1439 pins = "gpio26";
1440 function = "gpio";
1441 drive-strength = <16>;
1442 bias-disable;
1443 };
1444 };
1445
1446 cci1_default: cci1-default-state {
1447 pins = "gpio19", "gpio20";
1448 function = "cci_i2c";
1449 drive-strength = <16>;
1450 bias-disable;
1451 };
1452
1453 camera1_state_on:
1454 camera_board_default: camera-board-default-state {
1455 mclk1-pins {
1456 pins = "gpio14";
1457 function = "cam_mclk";
1458 drive-strength = <16>;
1459 bias-disable;
1460 };
1461
1462 pwdn-pins {
1463 pins = "gpio98";
1464 function = "gpio";
1465 drive-strength = <16>;
1466 bias-disable;
1467 };
1468
1469 rst-pins {
1470 pins = "gpio104";
1471 function = "gpio";
1472 drive-strength = <16>;
1473 bias-disable;
1474 };
1475 };
1476
1477 camera2_state_on:
1478 camera_front_default: camera-front-default-state {
1479 camera2_mclk: mclk2-pins {
1480 pins = "gpio15";
1481 function = "cam_mclk";
1482 drive-strength = <16>;
1483 bias-disable;
1484 };
1485
1486 camera2_rst: rst-pins {
1487 pins = "gpio23";
1488 function = "gpio";
1489 drive-strength = <16>;
1490 bias-disable;
1491 };
1492
1493 pwdn-pins {
1494 pins = "gpio133";
1495 function = "gpio";
1496 drive-strength = <16>;
1497 bias-disable;
1498 };
1499 };
1500
1501 pcie0_state_on: pcie0-state-on-state {
1502 perst-pins {
1503 pins = "gpio35";
1504 function = "gpio";
1505 drive-strength = <2>;
1506 bias-pull-down;
1507 };
1508
1509 clkreq-pins {
1510 pins = "gpio36";
1511 function = "pci_e0";
1512 drive-strength = <2>;
1513 bias-pull-up;
1514 };
1515
1516 wake-pins {
1517 pins = "gpio37";
1518 function = "gpio";
1519 drive-strength = <2>;
1520 bias-pull-up;
1521 };
1522 };
1523
1524 pcie0_state_off: pcie0-state-off-state {
1525 perst-pins {
1526 pins = "gpio35";
1527 function = "gpio";
1528 drive-strength = <2>;
1529 bias-pull-down;
1530 };
1531
1532 clkreq-pins {
1533 pins = "gpio36";
1534 function = "gpio";
1535 drive-strength = <2>;
1536 bias-disable;
1537 };
1538
1539 wake-pins {
1540 pins = "gpio37";
1541 function = "gpio";
1542 drive-strength = <2>;
1543 bias-disable;
1544 };
1545 };
1546
1547 blsp1_uart2_default: blsp1-uart2-default-state {
1548 pins = "gpio41", "gpio42", "gpio43", "gpio44";
1549 function = "blsp_uart2";
1550 drive-strength = <16>;
1551 bias-disable;
1552 };
1553
1554 blsp1_uart2_sleep: blsp1-uart2-sleep-state {
1555 pins = "gpio41", "gpio42", "gpio43", "gpio44";
1556 function = "gpio";
1557 drive-strength = <2>;
1558 bias-disable;
1559 };
1560
1561 blsp1_i2c3_default: blsp1-i2c3-default-state {
1562 pins = "gpio47", "gpio48";
1563 function = "blsp_i2c3";
1564 drive-strength = <16>;
1565 bias-disable;
1566 };
1567
1568 blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
1569 pins = "gpio47", "gpio48";
1570 function = "gpio";
1571 drive-strength = <2>;
1572 bias-disable;
1573 };
1574
1575 blsp2_uart3_4pins_default: blsp2-uart3-4pins-state {
1576 pins = "gpio49", "gpio50", "gpio51", "gpio52";
1577 function = "blsp_uart9";
1578 drive-strength = <16>;
1579 bias-disable;
1580 };
1581
1582 blsp2_uart3_4pins_sleep: blsp2-uart3-4pins-sleep-state {
1583 pins = "gpio49", "gpio50", "gpio51", "gpio52";
1584 function = "blsp_uart9";
1585 drive-strength = <2>;
1586 bias-disable;
1587 };
1588
1589 blsp2_i2c3_default: blsp2-i2c3-state-state {
1590 pins = "gpio51", "gpio52";
1591 function = "blsp_i2c9";
1592 drive-strength = <16>;
1593 bias-disable;
1594 };
1595
1596 blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
1597 pins = "gpio51", "gpio52";
1598 function = "gpio";
1599 drive-strength = <2>;
1600 bias-disable;
1601 };
1602
1603 wcd_intr_default: wcd-intr-default-state {
1604 pins = "gpio54";
1605 function = "gpio";
1606 drive-strength = <2>;
1607 bias-pull-down;
1608 };
1609
1610 blsp2_i2c1_default: blsp2-i2c1-state {
1611 pins = "gpio55", "gpio56";
1612 function = "blsp_i2c7";
1613 drive-strength = <16>;
1614 bias-disable;
1615 };
1616
1617 blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
1618 pins = "gpio55", "gpio56";
1619 function = "gpio";
1620 drive-strength = <2>;
1621 bias-disable;
1622 };
1623
1624 blsp2_i2c5_default: blsp2-i2c5-state {
1625 pins = "gpio60", "gpio61";
1626 function = "blsp_i2c11";
1627 drive-strength = <2>;
1628 bias-disable;
1629 };
1630
1631 /* Sleep state for BLSP2_I2C5 is missing.. */
1632
1633 cdc_reset_active: cdc-reset-active-state {
1634 pins = "gpio64";
1635 function = "gpio";
1636 drive-strength = <16>;
1637 bias-pull-down;
1638 output-high;
1639 };
1640
1641 cdc_reset_sleep: cdc-reset-sleep-state {
1642 pins = "gpio64";
1643 function = "gpio";
1644 drive-strength = <16>;
1645 bias-disable;
1646 output-low;
1647 };
1648
1649 blsp2_spi6_default: blsp2-spi6-default-state {
1650 spi-pins {
1651 pins = "gpio85", "gpio86", "gpio88";
1652 function = "blsp_spi12";
1653 drive-strength = <12>;
1654 bias-disable;
1655 };
1656
1657 cs-pins {
1658 pins = "gpio87";
1659 function = "gpio";
1660 drive-strength = <16>;
1661 bias-disable;
1662 output-high;
1663 };
1664 };
1665
1666 blsp2_spi6_sleep: blsp2-spi6-sleep-state {
1667 pins = "gpio85", "gpio86", "gpio87", "gpio88";
1668 function = "gpio";
1669 drive-strength = <2>;
1670 bias-pull-down;
1671 };
1672
1673 blsp2_i2c6_default: blsp2-i2c6-state {
1674 pins = "gpio87", "gpio88";
1675 function = "blsp_i2c12";
1676 drive-strength = <16>;
1677 bias-disable;
1678 };
1679
1680 blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
1681 pins = "gpio87", "gpio88";
1682 function = "gpio";
1683 drive-strength = <2>;
1684 bias-disable;
1685 };
1686
1687 pcie1_state_on: pcie1-on-state {
1688 perst-pins {
1689 pins = "gpio130";
1690 function = "gpio";
1691 drive-strength = <2>;
1692 bias-pull-down;
1693 };
1694
1695 clkreq-pins {
1696 pins = "gpio131";
1697 function = "pci_e1";
1698 drive-strength = <2>;
1699 bias-pull-up;
1700 };
1701
1702 wake-pins {
1703 pins = "gpio132";
1704 function = "gpio";
1705 drive-strength = <2>;
1706 bias-pull-down;
1707 };
1708 };
1709
1710 pcie1_state_off: pcie1-off-state {
1711 /* Perst is missing? */
1712 clkreq-pins {
1713 pins = "gpio131";
1714 function = "gpio";
1715 drive-strength = <2>;
1716 bias-disable;
1717 };
1718
1719 wake-pins {
1720 pins = "gpio132";
1721 function = "gpio";
1722 drive-strength = <2>;
1723 bias-disable;
1724 };
1725 };
1726
1727 pcie2_state_on: pcie2-on-state {
1728 perst-pins {
1729 pins = "gpio114";
1730 function = "gpio";
1731 drive-strength = <2>;
1732 bias-pull-down;
1733 };
1734
1735 clkreq-pins {
1736 pins = "gpio115";
1737 function = "pci_e2";
1738 drive-strength = <2>;
1739 bias-pull-up;
1740 };
1741
1742 wake-pins {
1743 pins = "gpio116";
1744 function = "gpio";
1745 drive-strength = <2>;
1746 bias-pull-down;
1747 };
1748 };
1749
1750 pcie2_state_off: pcie2-off-state {
1751 /* Perst is missing? */
1752 clkreq-pins {
1753 pins = "gpio115";
1754 function = "gpio";
1755 drive-strength = <2>;
1756 bias-disable;
1757 };
1758
1759 wake-pins {
1760 pins = "gpio116";
1761 function = "gpio";
1762 drive-strength = <2>;
1763 bias-disable;
1764 };
1765 };
1766
1767 sdc1_state_on: sdc1-on-state {
1768 clk-pins {
1769 pins = "sdc1_clk";
1770 bias-disable;
1771 drive-strength = <16>;
1772 };
1773
1774 cmd-pins {
1775 pins = "sdc1_cmd";
1776 bias-pull-up;
1777 drive-strength = <10>;
1778 };
1779
1780 data-pins {
1781 pins = "sdc1_data";
1782 bias-pull-up;
1783 drive-strength = <10>;
1784 };
1785
1786 rclk-pins {
1787 pins = "sdc1_rclk";
1788 bias-pull-down;
1789 };
1790 };
1791
1792 sdc1_state_off: sdc1-off-state {
1793 clk-pins {
1794 pins = "sdc1_clk";
1795 bias-disable;
1796 drive-strength = <2>;
1797 };
1798
1799 cmd-pins {
1800 pins = "sdc1_cmd";
1801 bias-pull-up;
1802 drive-strength = <2>;
1803 };
1804
1805 data-pins {
1806 pins = "sdc1_data";
1807 bias-pull-up;
1808 drive-strength = <2>;
1809 };
1810
1811 rclk-pins {
1812 pins = "sdc1_rclk";
1813 bias-pull-down;
1814 };
1815 };
1816
1817 sdc2_state_on: sdc2-on-state {
1818 clk-pins {
1819 pins = "sdc2_clk";
1820 bias-disable;
1821 drive-strength = <16>;
1822 };
1823
1824 cmd-pins {
1825 pins = "sdc2_cmd";
1826 bias-pull-up;
1827 drive-strength = <10>;
1828 };
1829
1830 data-pins {
1831 pins = "sdc2_data";
1832 bias-pull-up;
1833 drive-strength = <10>;
1834 };
1835 };
1836
1837 sdc2_state_off: sdc2-off-state {
1838 clk-pins {
1839 pins = "sdc2_clk";
1840 bias-disable;
1841 drive-strength = <2>;
1842 };
1843
1844 cmd-pins {
1845 pins = "sdc2_cmd";
1846 bias-pull-up;
1847 drive-strength = <2>;
1848 };
1849
1850 data-pins {
1851 pins = "sdc2_data";
1852 bias-pull-up;
1853 drive-strength = <2>;
1854 };
1855 };
1856 };
1857
1858 sram@290000 {
1859 compatible = "qcom,rpm-stats";
1860 reg = <0x00290000 0x10000>;
1861 };
1862
1863 spmi_bus: spmi@400f000 {
1864 compatible = "qcom,spmi-pmic-arb";
1865 reg = <0x0400f000 0x1000>,
1866 <0x04400000 0x800000>,
1867 <0x04c00000 0x800000>,
1868 <0x05800000 0x200000>,
1869 <0x0400a000 0x002100>;
1870 reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1871 interrupt-names = "periph_irq";
1872 interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
1873 qcom,ee = <0>;
1874 qcom,channel = <0>;
1875 #address-cells = <2>;
1876 #size-cells = <0>;
1877 interrupt-controller;
1878 #interrupt-cells = <4>;
1879 };
1880
1881 bus@0 {
1882 power-domains = <&gcc AGGRE0_NOC_GDSC>;
1883 compatible = "simple-pm-bus";
1884 #address-cells = <1>;
1885 #size-cells = <1>;
1886 ranges;
1887
1888 pcie0: pcie@600000 {
1889 compatible = "qcom,pcie-msm8996";
1890 status = "disabled";
1891 power-domains = <&gcc PCIE0_GDSC>;
1892 bus-range = <0x00 0xff>;
1893 num-lanes = <1>;
1894
1895 reg = <0x00600000 0x2000>,
1896 <0x0c000000 0xf1d>,
1897 <0x0c000f20 0xa8>,
1898 <0x0c100000 0x100000>;
1899 reg-names = "parf", "dbi", "elbi","config";
1900
1901 phys = <&pciephy_0>;
1902 phy-names = "pciephy";
1903
1904 #address-cells = <3>;
1905 #size-cells = <2>;
1906 ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
1907 <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
1908
1909 device_type = "pci";
1910
1911 interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
1912 interrupt-names = "msi";
1913 #interrupt-cells = <1>;
1914 interrupt-map-mask = <0 0 0 0x7>;
1915 interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1916 <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1917 <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1918 <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1919
1920 pinctrl-names = "default", "sleep";
1921 pinctrl-0 = <&pcie0_state_on>;
1922 pinctrl-1 = <&pcie0_state_off>;
1923
1924 linux,pci-domain = <0>;
1925
1926 clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
1927 <&gcc GCC_PCIE_0_AUX_CLK>,
1928 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
1929 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
1930 <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
1931
1932 clock-names = "pipe",
1933 "aux",
1934 "cfg",
1935 "bus_master",
1936 "bus_slave";
1937 };
1938
1939 pcie1: pcie@608000 {
1940 compatible = "qcom,pcie-msm8996";
1941 power-domains = <&gcc PCIE1_GDSC>;
1942 bus-range = <0x00 0xff>;
1943 num-lanes = <1>;
1944
1945 status = "disabled";
1946
1947 reg = <0x00608000 0x2000>,
1948 <0x0d000000 0xf1d>,
1949 <0x0d000f20 0xa8>,
1950 <0x0d100000 0x100000>;
1951
1952 reg-names = "parf", "dbi", "elbi","config";
1953
1954 phys = <&pciephy_1>;
1955 phy-names = "pciephy";
1956
1957 #address-cells = <3>;
1958 #size-cells = <2>;
1959 ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
1960 <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
1961
1962 device_type = "pci";
1963
1964 interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
1965 interrupt-names = "msi";
1966 #interrupt-cells = <1>;
1967 interrupt-map-mask = <0 0 0 0x7>;
1968 interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
1969 <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
1970 <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
1971 <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
1972
1973 pinctrl-names = "default", "sleep";
1974 pinctrl-0 = <&pcie1_state_on>;
1975 pinctrl-1 = <&pcie1_state_off>;
1976
1977 linux,pci-domain = <1>;
1978
1979 clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
1980 <&gcc GCC_PCIE_1_AUX_CLK>,
1981 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
1982 <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
1983 <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
1984
1985 clock-names = "pipe",
1986 "aux",
1987 "cfg",
1988 "bus_master",
1989 "bus_slave";
1990 };
1991
1992 pcie2: pcie@610000 {
1993 compatible = "qcom,pcie-msm8996";
1994 power-domains = <&gcc PCIE2_GDSC>;
1995 bus-range = <0x00 0xff>;
1996 num-lanes = <1>;
1997 status = "disabled";
1998 reg = <0x00610000 0x2000>,
1999 <0x0e000000 0xf1d>,
2000 <0x0e000f20 0xa8>,
2001 <0x0e100000 0x100000>;
2002
2003 reg-names = "parf", "dbi", "elbi","config";
2004
2005 phys = <&pciephy_2>;
2006 phy-names = "pciephy";
2007
2008 #address-cells = <3>;
2009 #size-cells = <2>;
2010 ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
2011 <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
2012
2013 device_type = "pci";
2014
2015 interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
2016 interrupt-names = "msi";
2017 #interrupt-cells = <1>;
2018 interrupt-map-mask = <0 0 0 0x7>;
2019 interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
2020 <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
2021 <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
2022 <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
2023
2024 pinctrl-names = "default", "sleep";
2025 pinctrl-0 = <&pcie2_state_on>;
2026 pinctrl-1 = <&pcie2_state_off>;
2027
2028 linux,pci-domain = <2>;
2029 clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
2030 <&gcc GCC_PCIE_2_AUX_CLK>,
2031 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
2032 <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
2033 <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
2034
2035 clock-names = "pipe",
2036 "aux",
2037 "cfg",
2038 "bus_master",
2039 "bus_slave";
2040 };
2041 };
2042
2043 ufshc: ufshc@624000 {
2044 compatible = "qcom,msm8996-ufshc", "qcom,ufshc",
2045 "jedec,ufs-2.0";
2046 reg = <0x00624000 0x2500>;
2047 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
2048
2049 phys = <&ufsphy_lane>;
2050 phy-names = "ufsphy";
2051
2052 power-domains = <&gcc UFS_GDSC>;
2053
2054 clock-names =
2055 "core_clk_src",
2056 "core_clk",
2057 "bus_clk",
2058 "bus_aggr_clk",
2059 "iface_clk",
2060 "core_clk_unipro_src",
2061 "core_clk_unipro",
2062 "core_clk_ice",
2063 "ref_clk",
2064 "tx_lane0_sync_clk",
2065 "rx_lane0_sync_clk";
2066 clocks =
2067 <&gcc UFS_AXI_CLK_SRC>,
2068 <&gcc GCC_UFS_AXI_CLK>,
2069 <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
2070 <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
2071 <&gcc GCC_UFS_AHB_CLK>,
2072 <&gcc UFS_ICE_CORE_CLK_SRC>,
2073 <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
2074 <&gcc GCC_UFS_ICE_CORE_CLK>,
2075 <&rpmcc RPM_SMD_LN_BB_CLK>,
2076 <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
2077 <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
2078 freq-table-hz =
2079 <100000000 200000000>,
2080 <0 0>,
2081 <0 0>,
2082 <0 0>,
2083 <0 0>,
2084 <150000000 300000000>,
2085 <0 0>,
2086 <0 0>,
2087 <0 0>,
2088 <0 0>,
2089 <0 0>;
2090
2091 interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
2092 <&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
2093 interconnect-names = "ufs-ddr", "cpu-ufs";
2094
2095 lanes-per-direction = <1>;
2096 #reset-cells = <1>;
2097 status = "disabled";
2098 };
2099
2100 ufsphy: phy@627000 {
2101 compatible = "qcom,msm8996-qmp-ufs-phy";
2102 reg = <0x00627000 0x1c4>;
2103 #address-cells = <1>;
2104 #size-cells = <1>;
2105 ranges;
2106
2107 clocks = <&gcc GCC_UFS_CLKREF_CLK>;
2108 clock-names = "ref";
2109
2110 resets = <&ufshc 0>;
2111 reset-names = "ufsphy";
2112 status = "disabled";
2113
2114 ufsphy_lane: phy@627400 {
2115 reg = <0x627400 0x12c>,
2116 <0x627600 0x200>,
2117 <0x627c00 0x1b4>;
2118 #clock-cells = <1>;
2119 #phy-cells = <0>;
2120 };
2121 };
2122
2123 camss: camss@a00000 {
2124 compatible = "qcom,msm8996-camss";
2125 reg = <0x00a34000 0x1000>,
2126 <0x00a00030 0x4>,
2127 <0x00a35000 0x1000>,
2128 <0x00a00038 0x4>,
2129 <0x00a36000 0x1000>,
2130 <0x00a00040 0x4>,
2131 <0x00a30000 0x100>,
2132 <0x00a30400 0x100>,
2133 <0x00a30800 0x100>,
2134 <0x00a30c00 0x100>,
2135 <0x00a31000 0x500>,
2136 <0x00a00020 0x10>,
2137 <0x00a10000 0x1000>,
2138 <0x00a14000 0x1000>;
2139 reg-names = "csiphy0",
2140 "csiphy0_clk_mux",
2141 "csiphy1",
2142 "csiphy1_clk_mux",
2143 "csiphy2",
2144 "csiphy2_clk_mux",
2145 "csid0",
2146 "csid1",
2147 "csid2",
2148 "csid3",
2149 "ispif",
2150 "csi_clk_mux",
2151 "vfe0",
2152 "vfe1";
2153 interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
2154 <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
2155 <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
2156 <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
2157 <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
2158 <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
2159 <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
2160 <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
2161 <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
2162 <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
2163 interrupt-names = "csiphy0",
2164 "csiphy1",
2165 "csiphy2",
2166 "csid0",
2167 "csid1",
2168 "csid2",
2169 "csid3",
2170 "ispif",
2171 "vfe0",
2172 "vfe1";
2173 power-domains = <&mmcc VFE0_GDSC>,
2174 <&mmcc VFE1_GDSC>;
2175 clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
2176 <&mmcc CAMSS_ISPIF_AHB_CLK>,
2177 <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
2178 <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
2179 <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
2180 <&mmcc CAMSS_CSI0_AHB_CLK>,
2181 <&mmcc CAMSS_CSI0_CLK>,
2182 <&mmcc CAMSS_CSI0PHY_CLK>,
2183 <&mmcc CAMSS_CSI0PIX_CLK>,
2184 <&mmcc CAMSS_CSI0RDI_CLK>,
2185 <&mmcc CAMSS_CSI1_AHB_CLK>,
2186 <&mmcc CAMSS_CSI1_CLK>,
2187 <&mmcc CAMSS_CSI1PHY_CLK>,
2188 <&mmcc CAMSS_CSI1PIX_CLK>,
2189 <&mmcc CAMSS_CSI1RDI_CLK>,
2190 <&mmcc CAMSS_CSI2_AHB_CLK>,
2191 <&mmcc CAMSS_CSI2_CLK>,
2192 <&mmcc CAMSS_CSI2PHY_CLK>,
2193 <&mmcc CAMSS_CSI2PIX_CLK>,
2194 <&mmcc CAMSS_CSI2RDI_CLK>,
2195 <&mmcc CAMSS_CSI3_AHB_CLK>,
2196 <&mmcc CAMSS_CSI3_CLK>,
2197 <&mmcc CAMSS_CSI3PHY_CLK>,
2198 <&mmcc CAMSS_CSI3PIX_CLK>,
2199 <&mmcc CAMSS_CSI3RDI_CLK>,
2200 <&mmcc CAMSS_AHB_CLK>,
2201 <&mmcc CAMSS_VFE0_CLK>,
2202 <&mmcc CAMSS_CSI_VFE0_CLK>,
2203 <&mmcc CAMSS_VFE0_AHB_CLK>,
2204 <&mmcc CAMSS_VFE0_STREAM_CLK>,
2205 <&mmcc CAMSS_VFE1_CLK>,
2206 <&mmcc CAMSS_CSI_VFE1_CLK>,
2207 <&mmcc CAMSS_VFE1_AHB_CLK>,
2208 <&mmcc CAMSS_VFE1_STREAM_CLK>,
2209 <&mmcc CAMSS_VFE_AHB_CLK>,
2210 <&mmcc CAMSS_VFE_AXI_CLK>;
2211 clock-names = "top_ahb",
2212 "ispif_ahb",
2213 "csiphy0_timer",
2214 "csiphy1_timer",
2215 "csiphy2_timer",
2216 "csi0_ahb",
2217 "csi0",
2218 "csi0_phy",
2219 "csi0_pix",
2220 "csi0_rdi",
2221 "csi1_ahb",
2222 "csi1",
2223 "csi1_phy",
2224 "csi1_pix",
2225 "csi1_rdi",
2226 "csi2_ahb",
2227 "csi2",
2228 "csi2_phy",
2229 "csi2_pix",
2230 "csi2_rdi",
2231 "csi3_ahb",
2232 "csi3",
2233 "csi3_phy",
2234 "csi3_pix",
2235 "csi3_rdi",
2236 "ahb",
2237 "vfe0",
2238 "csi_vfe0",
2239 "vfe0_ahb",
2240 "vfe0_stream",
2241 "vfe1",
2242 "csi_vfe1",
2243 "vfe1_ahb",
2244 "vfe1_stream",
2245 "vfe_ahb",
2246 "vfe_axi";
2247 iommus = <&vfe_smmu 0>,
2248 <&vfe_smmu 1>,
2249 <&vfe_smmu 2>,
2250 <&vfe_smmu 3>;
2251 status = "disabled";
2252 ports {
2253 #address-cells = <1>;
2254 #size-cells = <0>;
2255 };
2256 };
2257
2258 cci: cci@a0c000 {
2259 compatible = "qcom,msm8996-cci";
2260 #address-cells = <1>;
2261 #size-cells = <0>;
2262 reg = <0xa0c000 0x1000>;
2263 interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
2264 power-domains = <&mmcc CAMSS_GDSC>;
2265 clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
2266 <&mmcc CAMSS_CCI_AHB_CLK>,
2267 <&mmcc CAMSS_CCI_CLK>,
2268 <&mmcc CAMSS_AHB_CLK>;
2269 clock-names = "camss_top_ahb",
2270 "cci_ahb",
2271 "cci",
2272 "camss_ahb";
2273 assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
2274 <&mmcc CAMSS_CCI_CLK>;
2275 assigned-clock-rates = <80000000>, <37500000>;
2276 pinctrl-names = "default";
2277 pinctrl-0 = <&cci0_default &cci1_default>;
2278 status = "disabled";
2279
2280 cci_i2c0: i2c-bus@0 {
2281 reg = <0>;
2282 clock-frequency = <400000>;
2283 #address-cells = <1>;
2284 #size-cells = <0>;
2285 };
2286
2287 cci_i2c1: i2c-bus@1 {
2288 reg = <1>;
2289 clock-frequency = <400000>;
2290 #address-cells = <1>;
2291 #size-cells = <0>;
2292 };
2293 };
2294
2295 adreno_smmu: iommu@b40000 {
2296 compatible = "qcom,msm8996-smmu-v2", "qcom,adreno-smmu", "qcom,smmu-v2";
2297 reg = <0x00b40000 0x10000>;
2298
2299 #global-interrupts = <1>;
2300 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
2301 <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
2302 <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
2303 #iommu-cells = <1>;
2304
2305 clocks = <&gcc GCC_MMSS_BIMC_GFX_CLK>,
2306 <&mmcc GPU_AHB_CLK>;
2307 clock-names = "bus", "iface";
2308
2309 power-domains = <&mmcc GPU_GDSC>;
2310 };
2311
2312 venus: video-codec@c00000 {
2313 compatible = "qcom,msm8996-venus";
2314 reg = <0x00c00000 0xff000>;
2315 interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
2316 power-domains = <&mmcc VENUS_GDSC>;
2317 clocks = <&mmcc VIDEO_CORE_CLK>,
2318 <&mmcc VIDEO_AHB_CLK>,
2319 <&mmcc VIDEO_AXI_CLK>,
2320 <&mmcc VIDEO_MAXI_CLK>;
2321 clock-names = "core", "iface", "bus", "mbus";
2322 interconnects = <&mnoc MASTER_VIDEO_P0 &bimc SLAVE_EBI_CH0>,
2323 <&bimc MASTER_AMPSS_M0 &mnoc SLAVE_VENUS_CFG>;
2324 interconnect-names = "video-mem", "cpu-cfg";
2325 iommus = <&venus_smmu 0x00>,
2326 <&venus_smmu 0x01>,
2327 <&venus_smmu 0x0a>,
2328 <&venus_smmu 0x07>,
2329 <&venus_smmu 0x0e>,
2330 <&venus_smmu 0x0f>,
2331 <&venus_smmu 0x08>,
2332 <&venus_smmu 0x09>,
2333 <&venus_smmu 0x0b>,
2334 <&venus_smmu 0x0c>,
2335 <&venus_smmu 0x0d>,
2336 <&venus_smmu 0x10>,
2337 <&venus_smmu 0x11>,
2338 <&venus_smmu 0x21>,
2339 <&venus_smmu 0x28>,
2340 <&venus_smmu 0x29>,
2341 <&venus_smmu 0x2b>,
2342 <&venus_smmu 0x2c>,
2343 <&venus_smmu 0x2d>,
2344 <&venus_smmu 0x31>;
2345 memory-region = <&venus_mem>;
2346 status = "disabled";
2347
2348 video-decoder {
2349 compatible = "venus-decoder";
2350 clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
2351 clock-names = "core";
2352 power-domains = <&mmcc VENUS_CORE0_GDSC>;
2353 };
2354
2355 video-encoder {
2356 compatible = "venus-encoder";
2357 clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
2358 clock-names = "core";
2359 power-domains = <&mmcc VENUS_CORE1_GDSC>;
2360 };
2361 };
2362
2363 mdp_smmu: iommu@d00000 {
2364 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2365 reg = <0x00d00000 0x10000>;
2366
2367 #global-interrupts = <1>;
2368 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
2369 <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
2370 <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
2371 #iommu-cells = <1>;
2372 clocks = <&mmcc SMMU_MDP_AXI_CLK>,
2373 <&mmcc SMMU_MDP_AHB_CLK>;
2374 clock-names = "bus", "iface";
2375
2376 power-domains = <&mmcc MDSS_GDSC>;
2377 };
2378
2379 venus_smmu: iommu@d40000 {
2380 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2381 reg = <0x00d40000 0x20000>;
2382 #global-interrupts = <1>;
2383 interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
2384 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
2385 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
2386 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
2387 <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
2388 <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
2389 <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
2390 <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
2391 power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
2392 clocks = <&mmcc SMMU_VIDEO_AXI_CLK>,
2393 <&mmcc SMMU_VIDEO_AHB_CLK>;
2394 clock-names = "bus", "iface";
2395 #iommu-cells = <1>;
2396 status = "okay";
2397 };
2398
2399 vfe_smmu: iommu@da0000 {
2400 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2401 reg = <0x00da0000 0x10000>;
2402
2403 #global-interrupts = <1>;
2404 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
2405 <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
2406 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
2407 power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
2408 clocks = <&mmcc SMMU_VFE_AXI_CLK>,
2409 <&mmcc SMMU_VFE_AHB_CLK>;
2410 clock-names = "bus", "iface";
2411 #iommu-cells = <1>;
2412 };
2413
2414 lpass_q6_smmu: iommu@1600000 {
2415 compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
2416 reg = <0x01600000 0x20000>;
2417 #iommu-cells = <1>;
2418 power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
2419
2420 #global-interrupts = <1>;
2421 interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
2422 <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
2423 <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
2424 <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
2425 <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
2426 <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
2427 <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
2428 <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
2429 <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
2430 <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
2431 <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
2432 <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
2433 <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
2434
2435 clocks = <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>,
2436 <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>;
2437 clock-names = "bus", "iface";
2438 };
2439
2440 slpi_pil: remoteproc@1c00000 {
2441 compatible = "qcom,msm8996-slpi-pil";
2442 reg = <0x01c00000 0x4000>;
2443
2444 interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
2445 <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2446 <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2447 <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2448 <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
2449 interrupt-names = "wdog",
2450 "fatal",
2451 "ready",
2452 "handover",
2453 "stop-ack";
2454
2455 clocks = <&xo_board>,
2456 <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
2457 clock-names = "xo", "aggre2";
2458
2459 memory-region = <&slpi_mem>;
2460
2461 qcom,smem-states = <&slpi_smp2p_out 0>;
2462 qcom,smem-state-names = "stop";
2463
2464 power-domains = <&rpmpd MSM8996_VDDSSCX>;
2465 power-domain-names = "ssc_cx";
2466
2467 status = "disabled";
2468
2469 glink-edge {
2470 interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
2471 label = "dsps";
2472 qcom,remote-pid = <1>;
2473 mboxes = <&apcs_glb 27>;
2474 };
2475
2476 smd-edge {
2477 interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
2478
2479 label = "dsps";
2480 mboxes = <&apcs_glb 25>;
2481 qcom,smd-edge = <3>;
2482 qcom,remote-pid = <3>;
2483 };
2484 };
2485
2486 mss_pil: remoteproc@2080000 {
2487 compatible = "qcom,msm8996-mss-pil";
2488 reg = <0x2080000 0x100>,
2489 <0x2180000 0x020>;
2490 reg-names = "qdsp6", "rmb";
2491
2492 interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
2493 <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
2494 <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
2495 <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
2496 <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
2497 <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
2498 interrupt-names = "wdog", "fatal", "ready",
2499 "handover", "stop-ack",
2500 "shutdown-ack";
2501
2502 clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
2503 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
2504 <&gcc GCC_BOOT_ROM_AHB_CLK>,
2505 <&xo_board>,
2506 <&gcc GCC_MSS_GPLL0_DIV_CLK>,
2507 <&gcc GCC_MSS_SNOC_AXI_CLK>,
2508 <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
2509 <&rpmcc RPM_SMD_PCNOC_CLK>,
2510 <&rpmcc RPM_SMD_QDSS_CLK>;
2511 clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
2512 "snoc_axi", "mnoc_axi", "pnoc", "qdss";
2513
2514 resets = <&gcc GCC_MSS_RESTART>;
2515 reset-names = "mss_restart";
2516
2517 power-domains = <&rpmpd MSM8996_VDDCX>,
2518 <&rpmpd MSM8996_VDDMX>;
2519 power-domain-names = "cx", "mx";
2520
2521 qcom,smem-states = <&mpss_smp2p_out 0>;
2522 qcom,smem-state-names = "stop";
2523
2524 qcom,halt-regs = <&tcsr_1 0x3000 0x5000 0x4000>;
2525
2526 status = "disabled";
2527
2528 mba {
2529 memory-region = <&mba_mem>;
2530 };
2531
2532 mpss {
2533 memory-region = <&mpss_mem>;
2534 };
2535
2536 metadata {
2537 memory-region = <&mdata_mem>;
2538 };
2539
2540 glink-edge {
2541 interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
2542 label = "modem";
2543 qcom,remote-pid = <1>;
2544 mboxes = <&apcs_glb 15>;
2545 };
2546
2547 smd-edge {
2548 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
2549
2550 label = "mpss";
2551 mboxes = <&apcs_glb 12>;
2552 qcom,smd-edge = <0>;
2553 qcom,remote-pid = <1>;
2554 };
2555 };
2556
2557 stm@3002000 {
2558 compatible = "arm,coresight-stm", "arm,primecell";
2559 reg = <0x3002000 0x1000>,
2560 <0x8280000 0x180000>;
2561 reg-names = "stm-base", "stm-stimulus-base";
2562
2563 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2564 clock-names = "apb_pclk", "atclk";
2565
2566 out-ports {
2567 port {
2568 stm_out: endpoint {
2569 remote-endpoint =
2570 <&funnel0_in>;
2571 };
2572 };
2573 };
2574 };
2575
2576 tpiu@3020000 {
2577 compatible = "arm,coresight-tpiu", "arm,primecell";
2578 reg = <0x3020000 0x1000>;
2579
2580 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2581 clock-names = "apb_pclk", "atclk";
2582
2583 in-ports {
2584 port {
2585 tpiu_in: endpoint {
2586 remote-endpoint =
2587 <&replicator_out1>;
2588 };
2589 };
2590 };
2591 };
2592
2593 funnel@3021000 {
2594 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2595 reg = <0x3021000 0x1000>;
2596
2597 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2598 clock-names = "apb_pclk", "atclk";
2599
2600 in-ports {
2601 #address-cells = <1>;
2602 #size-cells = <0>;
2603
2604 port@7 {
2605 reg = <7>;
2606 funnel0_in: endpoint {
2607 remote-endpoint =
2608 <&stm_out>;
2609 };
2610 };
2611 };
2612
2613 out-ports {
2614 port {
2615 funnel0_out: endpoint {
2616 remote-endpoint =
2617 <&merge_funnel_in0>;
2618 };
2619 };
2620 };
2621 };
2622
2623 funnel@3022000 {
2624 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2625 reg = <0x3022000 0x1000>;
2626
2627 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2628 clock-names = "apb_pclk", "atclk";
2629
2630 in-ports {
2631 #address-cells = <1>;
2632 #size-cells = <0>;
2633
2634 port@6 {
2635 reg = <6>;
2636 funnel1_in: endpoint {
2637 remote-endpoint =
2638 <&apss_merge_funnel_out>;
2639 };
2640 };
2641 };
2642
2643 out-ports {
2644 port {
2645 funnel1_out: endpoint {
2646 remote-endpoint =
2647 <&merge_funnel_in1>;
2648 };
2649 };
2650 };
2651 };
2652
2653 funnel@3023000 {
2654 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2655 reg = <0x3023000 0x1000>;
2656
2657 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2658 clock-names = "apb_pclk", "atclk";
2659
2660
2661 out-ports {
2662 port {
2663 funnel2_out: endpoint {
2664 remote-endpoint =
2665 <&merge_funnel_in2>;
2666 };
2667 };
2668 };
2669 };
2670
2671 funnel@3025000 {
2672 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2673 reg = <0x3025000 0x1000>;
2674
2675 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2676 clock-names = "apb_pclk", "atclk";
2677
2678 in-ports {
2679 #address-cells = <1>;
2680 #size-cells = <0>;
2681
2682 port@0 {
2683 reg = <0>;
2684 merge_funnel_in0: endpoint {
2685 remote-endpoint =
2686 <&funnel0_out>;
2687 };
2688 };
2689
2690 port@1 {
2691 reg = <1>;
2692 merge_funnel_in1: endpoint {
2693 remote-endpoint =
2694 <&funnel1_out>;
2695 };
2696 };
2697
2698 port@2 {
2699 reg = <2>;
2700 merge_funnel_in2: endpoint {
2701 remote-endpoint =
2702 <&funnel2_out>;
2703 };
2704 };
2705 };
2706
2707 out-ports {
2708 port {
2709 merge_funnel_out: endpoint {
2710 remote-endpoint =
2711 <&etf_in>;
2712 };
2713 };
2714 };
2715 };
2716
2717 replicator@3026000 {
2718 compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
2719 reg = <0x3026000 0x1000>;
2720
2721 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2722 clock-names = "apb_pclk", "atclk";
2723
2724 in-ports {
2725 port {
2726 replicator_in: endpoint {
2727 remote-endpoint =
2728 <&etf_out>;
2729 };
2730 };
2731 };
2732
2733 out-ports {
2734 #address-cells = <1>;
2735 #size-cells = <0>;
2736
2737 port@0 {
2738 reg = <0>;
2739 replicator_out0: endpoint {
2740 remote-endpoint =
2741 <&etr_in>;
2742 };
2743 };
2744
2745 port@1 {
2746 reg = <1>;
2747 replicator_out1: endpoint {
2748 remote-endpoint =
2749 <&tpiu_in>;
2750 };
2751 };
2752 };
2753 };
2754
2755 etf@3027000 {
2756 compatible = "arm,coresight-tmc", "arm,primecell";
2757 reg = <0x3027000 0x1000>;
2758
2759 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2760 clock-names = "apb_pclk", "atclk";
2761
2762 in-ports {
2763 port {
2764 etf_in: endpoint {
2765 remote-endpoint =
2766 <&merge_funnel_out>;
2767 };
2768 };
2769 };
2770
2771 out-ports {
2772 port {
2773 etf_out: endpoint {
2774 remote-endpoint =
2775 <&replicator_in>;
2776 };
2777 };
2778 };
2779 };
2780
2781 etr@3028000 {
2782 compatible = "arm,coresight-tmc", "arm,primecell";
2783 reg = <0x3028000 0x1000>;
2784
2785 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2786 clock-names = "apb_pclk", "atclk";
2787 arm,scatter-gather;
2788
2789 in-ports {
2790 port {
2791 etr_in: endpoint {
2792 remote-endpoint =
2793 <&replicator_out0>;
2794 };
2795 };
2796 };
2797 };
2798
2799 debug@3810000 {
2800 compatible = "arm,coresight-cpu-debug", "arm,primecell";
2801 reg = <0x3810000 0x1000>;
2802
2803 clocks = <&rpmcc RPM_QDSS_CLK>;
2804 clock-names = "apb_pclk";
2805
2806 cpu = <&CPU0>;
2807 };
2808
2809 etm@3840000 {
2810 compatible = "arm,coresight-etm4x", "arm,primecell";
2811 reg = <0x3840000 0x1000>;
2812
2813 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2814 clock-names = "apb_pclk", "atclk";
2815
2816 cpu = <&CPU0>;
2817
2818 out-ports {
2819 port {
2820 etm0_out: endpoint {
2821 remote-endpoint =
2822 <&apss_funnel0_in0>;
2823 };
2824 };
2825 };
2826 };
2827
2828 debug@3910000 {
2829 compatible = "arm,coresight-cpu-debug", "arm,primecell";
2830 reg = <0x3910000 0x1000>;
2831
2832 clocks = <&rpmcc RPM_QDSS_CLK>;
2833 clock-names = "apb_pclk";
2834
2835 cpu = <&CPU1>;
2836 };
2837
2838 etm@3940000 {
2839 compatible = "arm,coresight-etm4x", "arm,primecell";
2840 reg = <0x3940000 0x1000>;
2841
2842 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2843 clock-names = "apb_pclk", "atclk";
2844
2845 cpu = <&CPU1>;
2846
2847 out-ports {
2848 port {
2849 etm1_out: endpoint {
2850 remote-endpoint =
2851 <&apss_funnel0_in1>;
2852 };
2853 };
2854 };
2855 };
2856
2857 funnel@39b0000 { /* APSS Funnel 0 */
2858 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2859 reg = <0x39b0000 0x1000>;
2860
2861 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2862 clock-names = "apb_pclk", "atclk";
2863
2864 in-ports {
2865 #address-cells = <1>;
2866 #size-cells = <0>;
2867
2868 port@0 {
2869 reg = <0>;
2870 apss_funnel0_in0: endpoint {
2871 remote-endpoint = <&etm0_out>;
2872 };
2873 };
2874
2875 port@1 {
2876 reg = <1>;
2877 apss_funnel0_in1: endpoint {
2878 remote-endpoint = <&etm1_out>;
2879 };
2880 };
2881 };
2882
2883 out-ports {
2884 port {
2885 apss_funnel0_out: endpoint {
2886 remote-endpoint =
2887 <&apss_merge_funnel_in0>;
2888 };
2889 };
2890 };
2891 };
2892
2893 debug@3a10000 {
2894 compatible = "arm,coresight-cpu-debug", "arm,primecell";
2895 reg = <0x3a10000 0x1000>;
2896
2897 clocks = <&rpmcc RPM_QDSS_CLK>;
2898 clock-names = "apb_pclk";
2899
2900 cpu = <&CPU2>;
2901 };
2902
2903 etm@3a40000 {
2904 compatible = "arm,coresight-etm4x", "arm,primecell";
2905 reg = <0x3a40000 0x1000>;
2906
2907 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2908 clock-names = "apb_pclk", "atclk";
2909
2910 cpu = <&CPU2>;
2911
2912 out-ports {
2913 port {
2914 etm2_out: endpoint {
2915 remote-endpoint =
2916 <&apss_funnel1_in0>;
2917 };
2918 };
2919 };
2920 };
2921
2922 debug@3b10000 {
2923 compatible = "arm,coresight-cpu-debug", "arm,primecell";
2924 reg = <0x3b10000 0x1000>;
2925
2926 clocks = <&rpmcc RPM_QDSS_CLK>;
2927 clock-names = "apb_pclk";
2928
2929 cpu = <&CPU3>;
2930 };
2931
2932 etm@3b40000 {
2933 compatible = "arm,coresight-etm4x", "arm,primecell";
2934 reg = <0x3b40000 0x1000>;
2935
2936 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2937 clock-names = "apb_pclk", "atclk";
2938
2939 cpu = <&CPU3>;
2940
2941 out-ports {
2942 port {
2943 etm3_out: endpoint {
2944 remote-endpoint =
2945 <&apss_funnel1_in1>;
2946 };
2947 };
2948 };
2949 };
2950
2951 funnel@3bb0000 { /* APSS Funnel 1 */
2952 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2953 reg = <0x3bb0000 0x1000>;
2954
2955 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2956 clock-names = "apb_pclk", "atclk";
2957
2958 in-ports {
2959 #address-cells = <1>;
2960 #size-cells = <0>;
2961
2962 port@0 {
2963 reg = <0>;
2964 apss_funnel1_in0: endpoint {
2965 remote-endpoint = <&etm2_out>;
2966 };
2967 };
2968
2969 port@1 {
2970 reg = <1>;
2971 apss_funnel1_in1: endpoint {
2972 remote-endpoint = <&etm3_out>;
2973 };
2974 };
2975 };
2976
2977 out-ports {
2978 port {
2979 apss_funnel1_out: endpoint {
2980 remote-endpoint =
2981 <&apss_merge_funnel_in1>;
2982 };
2983 };
2984 };
2985 };
2986
2987 funnel@3bc0000 {
2988 compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
2989 reg = <0x3bc0000 0x1000>;
2990
2991 clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
2992 clock-names = "apb_pclk", "atclk";
2993
2994 in-ports {
2995 #address-cells = <1>;
2996 #size-cells = <0>;
2997
2998 port@0 {
2999 reg = <0>;
3000 apss_merge_funnel_in0: endpoint {
3001 remote-endpoint =
3002 <&apss_funnel0_out>;
3003 };
3004 };
3005
3006 port@1 {
3007 reg = <1>;
3008 apss_merge_funnel_in1: endpoint {
3009 remote-endpoint =
3010 <&apss_funnel1_out>;
3011 };
3012 };
3013 };
3014
3015 out-ports {
3016 port {
3017 apss_merge_funnel_out: endpoint {
3018 remote-endpoint =
3019 <&funnel1_in>;
3020 };
3021 };
3022 };
3023 };
3024
3025 kryocc: clock-controller@6400000 {
3026 compatible = "qcom,msm8996-apcc";
3027 reg = <0x06400000 0x90000>;
3028
3029 clock-names = "xo", "sys_apcs_aux";
3030 clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
3031
3032 #clock-cells = <1>;
3033 };
3034
3035 usb3: usb@6af8800 {
3036 compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
3037 reg = <0x06af8800 0x400>;
3038 #address-cells = <1>;
3039 #size-cells = <1>;
3040 ranges;
3041
3042 interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
3043 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
3044 interrupt-names = "hs_phy_irq", "ss_phy_irq";
3045
3046 clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
3047 <&gcc GCC_USB30_MASTER_CLK>,
3048 <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
3049 <&gcc GCC_USB30_SLEEP_CLK>,
3050 <&gcc GCC_USB30_MOCK_UTMI_CLK>;
3051 clock-names = "cfg_noc",
3052 "core",
3053 "iface",
3054 "sleep",
3055 "mock_utmi";
3056
3057 assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
3058 <&gcc GCC_USB30_MASTER_CLK>;
3059 assigned-clock-rates = <19200000>, <120000000>;
3060
3061 interconnects = <&a2noc MASTER_USB3 &bimc SLAVE_EBI_CH0>,
3062 <&bimc MASTER_AMPSS_M0 &snoc SLAVE_USB3>;
3063 interconnect-names = "usb-ddr", "apps-usb";
3064
3065 power-domains = <&gcc USB30_GDSC>;
3066 status = "disabled";
3067
3068 usb3_dwc3: usb@6a00000 {
3069 compatible = "snps,dwc3";
3070 reg = <0x06a00000 0xcc00>;
3071 interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
3072 phys = <&hsusb_phy1>, <&ssusb_phy_0>;
3073 phy-names = "usb2-phy", "usb3-phy";
3074 snps,hird-threshold = /bits/ 8 <0>;
3075 snps,dis_u2_susphy_quirk;
3076 snps,dis_enblslpm_quirk;
3077 snps,is-utmi-l1-suspend;
3078 tx-fifo-resize;
3079 };
3080 };
3081
3082 usb3phy: phy@7410000 {
3083 compatible = "qcom,msm8996-qmp-usb3-phy";
3084 reg = <0x07410000 0x1c4>;
3085 #address-cells = <1>;
3086 #size-cells = <1>;
3087 ranges;
3088
3089 clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
3090 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
3091 <&gcc GCC_USB3_CLKREF_CLK>;
3092 clock-names = "aux", "cfg_ahb", "ref";
3093
3094 resets = <&gcc GCC_USB3_PHY_BCR>,
3095 <&gcc GCC_USB3PHY_PHY_BCR>;
3096 reset-names = "phy", "common";
3097 status = "disabled";
3098
3099 ssusb_phy_0: phy@7410200 {
3100 reg = <0x07410200 0x200>,
3101 <0x07410400 0x130>,
3102 <0x07410600 0x1a8>;
3103 #phy-cells = <0>;
3104
3105 #clock-cells = <0>;
3106 clock-output-names = "usb3_phy_pipe_clk_src";
3107 clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
3108 clock-names = "pipe0";
3109 };
3110 };
3111
3112 hsusb_phy1: phy@7411000 {
3113 compatible = "qcom,msm8996-qusb2-phy";
3114 reg = <0x07411000 0x180>;
3115 #phy-cells = <0>;
3116
3117 clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
3118 <&gcc GCC_RX1_USB2_CLKREF_CLK>;
3119 clock-names = "cfg_ahb", "ref";
3120
3121 resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
3122 nvmem-cells = <&qusb2p_hstx_trim>;
3123 status = "disabled";
3124 };
3125
3126 hsusb_phy2: phy@7412000 {
3127 compatible = "qcom,msm8996-qusb2-phy";
3128 reg = <0x07412000 0x180>;
3129 #phy-cells = <0>;
3130
3131 clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
3132 <&gcc GCC_RX2_USB2_CLKREF_CLK>;
3133 clock-names = "cfg_ahb", "ref";
3134
3135 resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
3136 nvmem-cells = <&qusb2s_hstx_trim>;
3137 status = "disabled";
3138 };
3139
3140 sdhc1: mmc@7464900 {
3141 compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
3142 reg = <0x07464900 0x11c>, <0x07464000 0x800>;
3143 reg-names = "hc", "core";
3144
3145 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
3146 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
3147 interrupt-names = "hc_irq", "pwr_irq";
3148
3149 clock-names = "iface", "core", "xo";
3150 clocks = <&gcc GCC_SDCC1_AHB_CLK>,
3151 <&gcc GCC_SDCC1_APPS_CLK>,
3152 <&rpmcc RPM_SMD_XO_CLK_SRC>;
3153 resets = <&gcc GCC_SDCC1_BCR>;
3154
3155 pinctrl-names = "default", "sleep";
3156 pinctrl-0 = <&sdc1_state_on>;
3157 pinctrl-1 = <&sdc1_state_off>;
3158
3159 bus-width = <8>;
3160 non-removable;
3161 status = "disabled";
3162 };
3163
3164 sdhc2: mmc@74a4900 {
3165 compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
3166 reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
3167 reg-names = "hc", "core";
3168
3169 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
3170 <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
3171 interrupt-names = "hc_irq", "pwr_irq";
3172
3173 clock-names = "iface", "core", "xo";
3174 clocks = <&gcc GCC_SDCC2_AHB_CLK>,
3175 <&gcc GCC_SDCC2_APPS_CLK>,
3176 <&rpmcc RPM_SMD_XO_CLK_SRC>;
3177 resets = <&gcc GCC_SDCC2_BCR>;
3178
3179 pinctrl-names = "default", "sleep";
3180 pinctrl-0 = <&sdc2_state_on>;
3181 pinctrl-1 = <&sdc2_state_off>;
3182
3183 bus-width = <4>;
3184 status = "disabled";
3185 };
3186
3187 blsp1_dma: dma-controller@7544000 {
3188 compatible = "qcom,bam-v1.7.0";
3189 reg = <0x07544000 0x2b000>;
3190 interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
3191 clocks = <&gcc GCC_BLSP1_AHB_CLK>;
3192 clock-names = "bam_clk";
3193 qcom,controlled-remotely;
3194 #dma-cells = <1>;
3195 qcom,ee = <0>;
3196 };
3197
3198 blsp1_uart2: serial@7570000 {
3199 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
3200 reg = <0x07570000 0x1000>;
3201 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
3202 clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
3203 <&gcc GCC_BLSP1_AHB_CLK>;
3204 clock-names = "core", "iface";
3205 pinctrl-names = "default", "sleep";
3206 pinctrl-0 = <&blsp1_uart2_default>;
3207 pinctrl-1 = <&blsp1_uart2_sleep>;
3208 dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
3209 dma-names = "tx", "rx";
3210 status = "disabled";
3211 };
3212
3213 blsp1_spi1: spi@7575000 {
3214 compatible = "qcom,spi-qup-v2.2.1";
3215 reg = <0x07575000 0x600>;
3216 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
3217 clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
3218 <&gcc GCC_BLSP1_AHB_CLK>;
3219 clock-names = "core", "iface";
3220 pinctrl-names = "default", "sleep";
3221 pinctrl-0 = <&blsp1_spi1_default>;
3222 pinctrl-1 = <&blsp1_spi1_sleep>;
3223 dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
3224 dma-names = "tx", "rx";
3225 #address-cells = <1>;
3226 #size-cells = <0>;
3227 status = "disabled";
3228 };
3229
3230 blsp1_i2c3: i2c@7577000 {
3231 compatible = "qcom,i2c-qup-v2.2.1";
3232 reg = <0x07577000 0x1000>;
3233 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
3234 clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
3235 <&gcc GCC_BLSP1_AHB_CLK>;
3236 clock-names = "core", "iface";
3237 pinctrl-names = "default", "sleep";
3238 pinctrl-0 = <&blsp1_i2c3_default>;
3239 pinctrl-1 = <&blsp1_i2c3_sleep>;
3240 dmas = <&blsp1_dma 16>, <&blsp1_dma 17>;
3241 dma-names = "tx", "rx";
3242 #address-cells = <1>;
3243 #size-cells = <0>;
3244 status = "disabled";
3245 };
3246
3247 blsp1_i2c6: i2c@757a000 {
3248 compatible = "qcom,i2c-qup-v2.2.1";
3249 reg = <0x757a000 0x1000>;
3250 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
3251 clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
3252 <&gcc GCC_BLSP1_AHB_CLK>;
3253 clock-names = "core", "iface";
3254 pinctrl-names = "default", "sleep";
3255 pinctrl-0 = <&blsp1_i2c6_default>;
3256 pinctrl-1 = <&blsp1_i2c6_sleep>;
3257 dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
3258 dma-names = "tx", "rx";
3259 #address-cells = <1>;
3260 #size-cells = <0>;
3261 status = "disabled";
3262 };
3263
3264 blsp2_dma: dma-controller@7584000 {
3265 compatible = "qcom,bam-v1.7.0";
3266 reg = <0x07584000 0x2b000>;
3267 interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
3268 clocks = <&gcc GCC_BLSP2_AHB_CLK>;
3269 clock-names = "bam_clk";
3270 qcom,controlled-remotely;
3271 #dma-cells = <1>;
3272 qcom,ee = <0>;
3273 };
3274
3275 blsp2_uart2: serial@75b0000 {
3276 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
3277 reg = <0x075b0000 0x1000>;
3278 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
3279 clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
3280 <&gcc GCC_BLSP2_AHB_CLK>;
3281 clock-names = "core", "iface";
3282 status = "disabled";
3283 };
3284
3285 blsp2_uart3: serial@75b1000 {
3286 compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
3287 reg = <0x075b1000 0x1000>;
3288 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
3289 clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
3290 <&gcc GCC_BLSP2_AHB_CLK>;
3291 clock-names = "core", "iface";
3292 status = "disabled";
3293 };
3294
3295 blsp2_i2c1: i2c@75b5000 {
3296 compatible = "qcom,i2c-qup-v2.2.1";
3297 reg = <0x075b5000 0x1000>;
3298 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
3299 clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
3300 <&gcc GCC_BLSP2_AHB_CLK>;
3301 clock-names = "core", "iface";
3302 pinctrl-names = "default", "sleep";
3303 pinctrl-0 = <&blsp2_i2c1_default>;
3304 pinctrl-1 = <&blsp2_i2c1_sleep>;
3305 dmas = <&blsp2_dma 12>, <&blsp2_dma 13>;
3306 dma-names = "tx", "rx";
3307 #address-cells = <1>;
3308 #size-cells = <0>;
3309 status = "disabled";
3310 };
3311
3312 blsp2_i2c2: i2c@75b6000 {
3313 compatible = "qcom,i2c-qup-v2.2.1";
3314 reg = <0x075b6000 0x1000>;
3315 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
3316 clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
3317 <&gcc GCC_BLSP2_AHB_CLK>;
3318 clock-names = "core", "iface";
3319 pinctrl-names = "default", "sleep";
3320 pinctrl-0 = <&blsp2_i2c2_default>;
3321 pinctrl-1 = <&blsp2_i2c2_sleep>;
3322 dmas = <&blsp2_dma 14>, <&blsp2_dma 15>;
3323 dma-names = "tx", "rx";
3324 #address-cells = <1>;
3325 #size-cells = <0>;
3326 status = "disabled";
3327 };
3328
3329 blsp2_i2c3: i2c@75b7000 {
3330 compatible = "qcom,i2c-qup-v2.2.1";
3331 reg = <0x075b7000 0x1000>;
3332 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
3333 clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
3334 <&gcc GCC_BLSP2_AHB_CLK>;
3335 clock-names = "core", "iface";
3336 clock-frequency = <400000>;
3337 pinctrl-names = "default", "sleep";
3338 pinctrl-0 = <&blsp2_i2c3_default>;
3339 pinctrl-1 = <&blsp2_i2c3_sleep>;
3340 dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
3341 dma-names = "tx", "rx";
3342 #address-cells = <1>;
3343 #size-cells = <0>;
3344 status = "disabled";
3345 };
3346
3347 blsp2_i2c5: i2c@75b9000 {
3348 compatible = "qcom,i2c-qup-v2.2.1";
3349 reg = <0x75b9000 0x1000>;
3350 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
3351 clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>,
3352 <&gcc GCC_BLSP2_AHB_CLK>;
3353 clock-names = "core", "iface";
3354 pinctrl-names = "default";
3355 pinctrl-0 = <&blsp2_i2c5_default>;
3356 dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
3357 dma-names = "tx", "rx";
3358 #address-cells = <1>;
3359 #size-cells = <0>;
3360 status = "disabled";
3361 };
3362
3363 blsp2_i2c6: i2c@75ba000 {
3364 compatible = "qcom,i2c-qup-v2.2.1";
3365 reg = <0x75ba000 0x1000>;
3366 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
3367 clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>,
3368 <&gcc GCC_BLSP2_AHB_CLK>;
3369 clock-names = "core", "iface";
3370 pinctrl-names = "default", "sleep";
3371 pinctrl-0 = <&blsp2_i2c6_default>;
3372 pinctrl-1 = <&blsp2_i2c6_sleep>;
3373 dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
3374 dma-names = "tx", "rx";
3375 #address-cells = <1>;
3376 #size-cells = <0>;
3377 status = "disabled";
3378 };
3379
3380 blsp2_spi6: spi@75ba000 {
3381 compatible = "qcom,spi-qup-v2.2.1";
3382 reg = <0x075ba000 0x600>;
3383 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
3384 clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
3385 <&gcc GCC_BLSP2_AHB_CLK>;
3386 clock-names = "core", "iface";
3387 pinctrl-names = "default", "sleep";
3388 pinctrl-0 = <&blsp2_spi6_default>;
3389 pinctrl-1 = <&blsp2_spi6_sleep>;
3390 dmas = <&blsp2_dma 22>, <&blsp2_dma 23>;
3391 dma-names = "tx", "rx";
3392 #address-cells = <1>;
3393 #size-cells = <0>;
3394 status = "disabled";
3395 };
3396
3397 usb2: usb@76f8800 {
3398 compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
3399 reg = <0x076f8800 0x400>;
3400 #address-cells = <1>;
3401 #size-cells = <1>;
3402 ranges;
3403
3404 clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
3405 <&gcc GCC_USB20_MASTER_CLK>,
3406 <&gcc GCC_USB20_MOCK_UTMI_CLK>,
3407 <&gcc GCC_USB20_SLEEP_CLK>,
3408 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
3409 clock-names = "cfg_noc",
3410 "core",
3411 "iface",
3412 "sleep",
3413 "mock_utmi";
3414
3415 assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
3416 <&gcc GCC_USB20_MASTER_CLK>;
3417 assigned-clock-rates = <19200000>, <60000000>;
3418
3419 power-domains = <&gcc USB30_GDSC>;
3420 qcom,select-utmi-as-pipe-clk;
3421 status = "disabled";
3422
3423 usb2_dwc3: usb@7600000 {
3424 compatible = "snps,dwc3";
3425 reg = <0x07600000 0xcc00>;
3426 interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
3427 phys = <&hsusb_phy2>;
3428 phy-names = "usb2-phy";
3429 maximum-speed = "high-speed";
3430 snps,dis_u2_susphy_quirk;
3431 snps,dis_enblslpm_quirk;
3432 };
3433 };
3434
3435 slimbam: dma-controller@9184000 {
3436 compatible = "qcom,bam-v1.7.0";
3437 qcom,controlled-remotely;
3438 reg = <0x09184000 0x32000>;
3439 num-channels = <31>;
3440 interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
3441 #dma-cells = <1>;
3442 qcom,ee = <1>;
3443 qcom,num-ees = <2>;
3444 };
3445
3446 slim_msm: slim-ngd@91c0000 {
3447 compatible = "qcom,slim-ngd-v1.5.0";
3448 reg = <0x091c0000 0x2c000>;
3449 interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
3450 dmas = <&slimbam 3>, <&slimbam 4>;
3451 dma-names = "rx", "tx";
3452 #address-cells = <1>;
3453 #size-cells = <0>;
3454
3455 status = "disabled";
3456 };
3457
3458 adsp_pil: remoteproc@9300000 {
3459 compatible = "qcom,msm8996-adsp-pil";
3460 reg = <0x09300000 0x80000>;
3461
3462 interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
3463 <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
3464 <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
3465 <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
3466 <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
3467 interrupt-names = "wdog", "fatal", "ready",
3468 "handover", "stop-ack";
3469
3470 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
3471 clock-names = "xo";
3472
3473 memory-region = <&adsp_mem>;
3474
3475 qcom,smem-states = <&adsp_smp2p_out 0>;
3476 qcom,smem-state-names = "stop";
3477
3478 power-domains = <&rpmpd MSM8996_VDDCX>;
3479 power-domain-names = "cx";
3480
3481 status = "disabled";
3482
3483 glink-edge {
3484 interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
3485 label = "lpass";
3486 qcom,remote-pid = <2>;
3487 mboxes = <&apcs_glb 9>;
3488 };
3489
3490
3491 smd-edge {
3492 interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
3493
3494 label = "lpass";
3495 mboxes = <&apcs_glb 8>;
3496 qcom,smd-edge = <1>;
3497 qcom,remote-pid = <2>;
3498
3499 apr {
3500 power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
3501 compatible = "qcom,apr-v2";
3502 qcom,smd-channels = "apr_audio_svc";
3503 qcom,domain = <APR_DOMAIN_ADSP>;
3504 #address-cells = <1>;
3505 #size-cells = <0>;
3506
3507 service@3 {
3508 reg = <APR_SVC_ADSP_CORE>;
3509 compatible = "qcom,q6core";
3510 };
3511
3512 q6afe: service@4 {
3513 compatible = "qcom,q6afe";
3514 reg = <APR_SVC_AFE>;
3515 q6afedai: dais {
3516 compatible = "qcom,q6afe-dais";
3517 #address-cells = <1>;
3518 #size-cells = <0>;
3519 #sound-dai-cells = <1>;
3520 dai@1 {
3521 reg = <1>;
3522 };
3523 };
3524 };
3525
3526 q6asm: service@7 {
3527 compatible = "qcom,q6asm";
3528 reg = <APR_SVC_ASM>;
3529 q6asmdai: dais {
3530 compatible = "qcom,q6asm-dais";
3531 #address-cells = <1>;
3532 #size-cells = <0>;
3533 #sound-dai-cells = <1>;
3534 iommus = <&lpass_q6_smmu 1>;
3535 };
3536 };
3537
3538 q6adm: service@8 {
3539 compatible = "qcom,q6adm";
3540 reg = <APR_SVC_ADM>;
3541 q6routing: routing {
3542 compatible = "qcom,q6adm-routing";
3543 #sound-dai-cells = <0>;
3544 };
3545 };
3546 };
3547
3548 fastrpc {
3549 compatible = "qcom,fastrpc";
3550 qcom,smd-channels = "fastrpcsmd-apps-dsp";
3551 label = "adsp";
3552
3553 #address-cells = <1>;
3554 #size-cells = <0>;
3555
3556 cb@1 {
3557 compatible = "qcom,fastrpc-compute-cb";
3558 reg = <1>;
3559 iommus = <&lpass_q6_smmu 8>;
3560 };
3561
3562 cb@2 {
3563 compatible = "qcom,fastrpc-compute-cb";
3564 reg = <2>;
3565 iommus = <&lpass_q6_smmu 9>;
3566 };
3567
3568 cb@3 {
3569 compatible = "qcom,fastrpc-compute-cb";
3570 reg = <3>;
3571 iommus = <&lpass_q6_smmu 10>;
3572 };
3573
3574 cb@4 {
3575 compatible = "qcom,fastrpc-compute-cb";
3576 reg = <4>;
3577 iommus = <&lpass_q6_smmu 11>;
3578 };
3579
3580 cb@5 {
3581 compatible = "qcom,fastrpc-compute-cb";
3582 reg = <5>;
3583 iommus = <&lpass_q6_smmu 12>;
3584 };
3585
3586 cb@6 {
3587 compatible = "qcom,fastrpc-compute-cb";
3588 reg = <6>;
3589 iommus = <&lpass_q6_smmu 5>;
3590 };
3591
3592 cb@7 {
3593 compatible = "qcom,fastrpc-compute-cb";
3594 reg = <7>;
3595 iommus = <&lpass_q6_smmu 6>;
3596 };
3597
3598 cb@8 {
3599 compatible = "qcom,fastrpc-compute-cb";
3600 reg = <8>;
3601 iommus = <&lpass_q6_smmu 7>;
3602 };
3603 };
3604 };
3605 };
3606
3607 apcs_glb: mailbox@9820000 {
3608 compatible = "qcom,msm8996-apcs-hmss-global";
3609 reg = <0x09820000 0x1000>;
3610
3611 #mbox-cells = <1>;
3612 #clock-cells = <0>;
3613 };
3614
3615 timer@9840000 {
3616 #address-cells = <1>;
3617 #size-cells = <1>;
3618 ranges;
3619 compatible = "arm,armv7-timer-mem";
3620 reg = <0x09840000 0x1000>;
3621 clock-frequency = <19200000>;
3622
3623 frame@9850000 {
3624 frame-number = <0>;
3625 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
3626 <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
3627 reg = <0x09850000 0x1000>,
3628 <0x09860000 0x1000>;
3629 };
3630
3631 frame@9870000 {
3632 frame-number = <1>;
3633 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
3634 reg = <0x09870000 0x1000>;
3635 status = "disabled";
3636 };
3637
3638 frame@9880000 {
3639 frame-number = <2>;
3640 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
3641 reg = <0x09880000 0x1000>;
3642 status = "disabled";
3643 };
3644
3645 frame@9890000 {
3646 frame-number = <3>;
3647 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
3648 reg = <0x09890000 0x1000>;
3649 status = "disabled";
3650 };
3651
3652 frame@98a0000 {
3653 frame-number = <4>;
3654 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
3655 reg = <0x098a0000 0x1000>;
3656 status = "disabled";
3657 };
3658
3659 frame@98b0000 {
3660 frame-number = <5>;
3661 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
3662 reg = <0x098b0000 0x1000>;
3663 status = "disabled";
3664 };
3665
3666 frame@98c0000 {
3667 frame-number = <6>;
3668 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
3669 reg = <0x098c0000 0x1000>;
3670 status = "disabled";
3671 };
3672 };
3673
3674 saw3: syscon@9a10000 {
3675 compatible = "syscon";
3676 reg = <0x09a10000 0x1000>;
3677 };
3678
3679 cbf: clock-controller@9a11000 {
3680 compatible = "qcom,msm8996-cbf";
3681 reg = <0x09a11000 0x10000>;
3682 clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
3683 #clock-cells = <0>;
3684 #interconnect-cells = <1>;
3685 };
3686
3687 intc: interrupt-controller@9bc0000 {
3688 compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
3689 #interrupt-cells = <3>;
3690 interrupt-controller;
3691 #redistributor-regions = <1>;
3692 redistributor-stride = <0x0 0x40000>;
3693 reg = <0x09bc0000 0x10000>,
3694 <0x09c00000 0x100000>;
3695 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
3696 };
3697 };
3698
3699 sound: sound {
3700 };
3701
3702 thermal-zones {
3703 cpu0-thermal {
3704 polling-delay-passive = <250>;
3705 polling-delay = <1000>;
3706
3707 thermal-sensors = <&tsens0 3>;
3708
3709 trips {
3710 cpu0_alert0: trip-point0 {
3711 temperature = <75000>;
3712 hysteresis = <2000>;
3713 type = "passive";
3714 };
3715
3716 cpu0_crit: cpu-crit {
3717 temperature = <110000>;
3718 hysteresis = <2000>;
3719 type = "critical";
3720 };
3721 };
3722 };
3723
3724 cpu1-thermal {
3725 polling-delay-passive = <250>;
3726 polling-delay = <1000>;
3727
3728 thermal-sensors = <&tsens0 5>;
3729
3730 trips {
3731 cpu1_alert0: trip-point0 {
3732 temperature = <75000>;
3733 hysteresis = <2000>;
3734 type = "passive";
3735 };
3736
3737 cpu1_crit: cpu-crit {
3738 temperature = <110000>;
3739 hysteresis = <2000>;
3740 type = "critical";
3741 };
3742 };
3743 };
3744
3745 cpu2-thermal {
3746 polling-delay-passive = <250>;
3747 polling-delay = <1000>;
3748
3749 thermal-sensors = <&tsens0 8>;
3750
3751 trips {
3752 cpu2_alert0: trip-point0 {
3753 temperature = <75000>;
3754 hysteresis = <2000>;
3755 type = "passive";
3756 };
3757
3758 cpu2_crit: cpu-crit {
3759 temperature = <110000>;
3760 hysteresis = <2000>;
3761 type = "critical";
3762 };
3763 };
3764 };
3765
3766 cpu3-thermal {
3767 polling-delay-passive = <250>;
3768 polling-delay = <1000>;
3769
3770 thermal-sensors = <&tsens0 10>;
3771
3772 trips {
3773 cpu3_alert0: trip-point0 {
3774 temperature = <75000>;
3775 hysteresis = <2000>;
3776 type = "passive";
3777 };
3778
3779 cpu3_crit: cpu-crit {
3780 temperature = <110000>;
3781 hysteresis = <2000>;
3782 type = "critical";
3783 };
3784 };
3785 };
3786
3787 gpu-top-thermal {
3788 polling-delay-passive = <250>;
3789 polling-delay = <1000>;
3790
3791 thermal-sensors = <&tsens1 6>;
3792
3793 trips {
3794 gpu1_alert0: trip-point0 {
3795 temperature = <90000>;
3796 hysteresis = <2000>;
3797 type = "passive";
3798 };
3799 };
3800
3801 cooling-maps {
3802 map0 {
3803 trip = <&gpu1_alert0>;
3804 cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3805 };
3806 };
3807 };
3808
3809 gpu-bottom-thermal {
3810 polling-delay-passive = <250>;
3811 polling-delay = <1000>;
3812
3813 thermal-sensors = <&tsens1 7>;
3814
3815 trips {
3816 gpu2_alert0: trip-point0 {
3817 temperature = <90000>;
3818 hysteresis = <2000>;
3819 type = "passive";
3820 };
3821 };
3822
3823 cooling-maps {
3824 map0 {
3825 trip = <&gpu2_alert0>;
3826 cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
3827 };
3828 };
3829 };
3830
3831 m4m-thermal {
3832 polling-delay-passive = <250>;
3833 polling-delay = <1000>;
3834
3835 thermal-sensors = <&tsens0 1>;
3836
3837 trips {
3838 m4m_alert0: trip-point0 {
3839 temperature = <90000>;
3840 hysteresis = <2000>;
3841 type = "hot";
3842 };
3843 };
3844 };
3845
3846 l3-or-venus-thermal {
3847 polling-delay-passive = <250>;
3848 polling-delay = <1000>;
3849
3850 thermal-sensors = <&tsens0 2>;
3851
3852 trips {
3853 l3_or_venus_alert0: trip-point0 {
3854 temperature = <90000>;
3855 hysteresis = <2000>;
3856 type = "hot";
3857 };
3858 };
3859 };
3860
3861 cluster0-l2-thermal {
3862 polling-delay-passive = <250>;
3863 polling-delay = <1000>;
3864
3865 thermal-sensors = <&tsens0 7>;
3866
3867 trips {
3868 cluster0_l2_alert0: trip-point0 {
3869 temperature = <90000>;
3870 hysteresis = <2000>;
3871 type = "hot";
3872 };
3873 };
3874 };
3875
3876 cluster1-l2-thermal {
3877 polling-delay-passive = <250>;
3878 polling-delay = <1000>;
3879
3880 thermal-sensors = <&tsens0 12>;
3881
3882 trips {
3883 cluster1_l2_alert0: trip-point0 {
3884 temperature = <90000>;
3885 hysteresis = <2000>;
3886 type = "hot";
3887 };
3888 };
3889 };
3890
3891 camera-thermal {
3892 polling-delay-passive = <250>;
3893 polling-delay = <1000>;
3894
3895 thermal-sensors = <&tsens1 1>;
3896
3897 trips {
3898 camera_alert0: trip-point0 {
3899 temperature = <90000>;
3900 hysteresis = <2000>;
3901 type = "hot";
3902 };
3903 };
3904 };
3905
3906 q6-dsp-thermal {
3907 polling-delay-passive = <250>;
3908 polling-delay = <1000>;
3909
3910 thermal-sensors = <&tsens1 2>;
3911
3912 trips {
3913 q6_dsp_alert0: trip-point0 {
3914 temperature = <90000>;
3915 hysteresis = <2000>;
3916 type = "hot";
3917 };
3918 };
3919 };
3920
3921 mem-thermal {
3922 polling-delay-passive = <250>;
3923 polling-delay = <1000>;
3924
3925 thermal-sensors = <&tsens1 3>;
3926
3927 trips {
3928 mem_alert0: trip-point0 {
3929 temperature = <90000>;
3930 hysteresis = <2000>;
3931 type = "hot";
3932 };
3933 };
3934 };
3935
3936 modemtx-thermal {
3937 polling-delay-passive = <250>;
3938 polling-delay = <1000>;
3939
3940 thermal-sensors = <&tsens1 4>;
3941
3942 trips {
3943 modemtx_alert0: trip-point0 {
3944 temperature = <90000>;
3945 hysteresis = <2000>;
3946 type = "hot";
3947 };
3948 };
3949 };
3950 };
3951
3952 timer {
3953 compatible = "arm,armv8-timer";
3954 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
3955 <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
3956 <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
3957 <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
3958 };
3959};