| Tom Rini | ba787bb | 2022-05-30 17:01:22 -0400 | [diff] [blame] | 1 | menu "PowerPC and LayerScape SPL Boot options" |
| 2 | depends on (PPC && SUPPORT_SPL && !SPL_FRAMEWORK) || \ |
| 3 | ((ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && SUPPORT_SPL) |
| 4 | |
| 5 | config SPL_NAND_BOOT |
| 6 | bool "Load SPL from NAND flash" |
| 7 | depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) |
| 8 | |
| 9 | config SPL_MMC_BOOT |
| 10 | bool "Load SPL from SD Card / eMMC" |
| 11 | depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) |
| 12 | |
| 13 | config SPL_SPI_BOOT |
| 14 | bool "Load SPL from SPI flash" |
| 15 | depends on PPC && (SUPPORT_SPL && !SPL_FRAMEWORK) |
| 16 | |
| 17 | config SPL_FSL_PBL |
| 18 | bool "Create SPL in Freescale PBI format" |
| 19 | depends on (PPC || ARCH_LS1021A || ARCH_LS1043A || ARCH_LS1046A) && \ |
| 20 | SUPPORT_SPL |
| 21 | help |
| 22 | Create boot binary having SPL binary in PBI format concatenated with |
| 23 | u-boot binary. |
| 24 | |
| 25 | config SPL_SYS_CCSR_DO_NOT_RELOCATE |
| 26 | bool "Ensures that CCSR is not relocated" |
| 27 | depends on PPC |
| 28 | help |
| 29 | If this is defined, then CONFIG_SYS_CCSRBAR_PHYS will be forced to a |
| 30 | value that ensures that CCSR is not relocated. |
| 31 | |
| 32 | config TPL_SYS_CCSR_DO_NOT_RELOCATE |
| 33 | def_bool y |
| 34 | depends on SPL_SYS_CCSR_DO_NOT_RELOCATE |
| 35 | |
| 36 | menu "PowerPC SPL / TPL specific options" |
| 37 | depends on PPC && (SPL && !SPL_FRAMEWORK) |
| 38 | |
| 39 | config SPL_INIT_MINIMAL |
| 40 | bool "Arch init code will be built for a very small image" |
| 41 | |
| 42 | config SPL_FLUSH_IMAGE |
| 43 | bool "Clean dcache and invalidate icache after loading the image" |
| 44 | |
| 45 | config SPL_SKIP_RELOCATE |
| 46 | bool "Skip relocating SPL" |
| 47 | |
| 48 | config SPL_GD_ADDR |
| 49 | hex "Address to use for global data (gd) in SPL" |
| 50 | depends on !SPL_INIT_MINIMAL |
| 51 | |
| 52 | config SPL_RELOC_TEXT_BASE |
| 53 | hex "Address to relocate SPL to" |
| 54 | default SPL_TEXT_BASE |
| 55 | help |
| 56 | If unspecified, this is equal to CONFIG_SPL_TEXT_BASE (i.e. no |
| 57 | relocation is done). |
| 58 | |
| 59 | config SPL_RELOC_STACK |
| 60 | hex "Address of the start of the stack SPL will use after relocation." |
| 61 | help |
| 62 | If unspecified, this is equal to CONFIG_SYS_SPL_MALLOC_START. Starting |
| 63 | address of the malloc pool used in SPL. When this option is set the full |
| 64 | malloc is used in SPL and it is set up by spl_init() and before that, the |
| 65 | simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. |
| 66 | |
| 67 | config SPL_RELOC_MALLOC |
| 68 | bool "SPL has malloc pool after relocation" |
| 69 | |
| 70 | config SPL_RELOC_MALLOC_ADDR |
| 71 | hex "Address of malloc pool in SPL" |
| 72 | depends on SPL_RELOC_MALLOC |
| 73 | |
| 74 | config SPL_RELOC_MALLOC_SIZE |
| 75 | hex "Size of malloc pool in SPL" |
| 76 | depends on SPL_RELOC_MALLOC |
| 77 | |
| 78 | config TPL_GD_ADDR |
| 79 | hex "Address to use for global data (gd) in TPL" |
| 80 | depends on TPL |
| 81 | |
| 82 | config TPL_RELOC_TEXT_BASE |
| 83 | hex "Address to relocate TPL to" |
| 84 | depends on TPL |
| 85 | default TPL_TEXT_BASE |
| 86 | help |
| 87 | If unspecified, this is equal to CONFIG_TPL_TEXT_BASE (i.e. no |
| 88 | relocation is done). |
| 89 | |
| 90 | config TPL_RELOC_STACK |
| 91 | hex "Address of the start of the stack TPL will use after relocation." |
| 92 | depends on TPL |
| 93 | help |
| 94 | If unspecified, this is equal to CONFIG_SYS_TPL_MALLOC_START. Starting |
| 95 | address of the malloc pool used in TPL. When this option is set the full |
| 96 | malloc is used in TPL and it is set up by spl_init() and before that, the |
| 97 | simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. |
| 98 | |
| 99 | config TPL_RELOC_MALLOC |
| 100 | bool "TPL has malloc pool after relocation" |
| 101 | depends on TPL |
| 102 | |
| 103 | config TPL_RELOC_MALLOC_ADDR |
| 104 | hex "Address of malloc pool in TPL" |
| 105 | depends on TPL_RELOC_MALLOC |
| 106 | |
| 107 | config TPL_RELOC_MALLOC_SIZE |
| 108 | hex "Size of malloc pool in TPL" |
| 109 | depends on TPL_RELOC_MALLOC |
| 110 | |
| 111 | config TPL_PAD_TO |
| 112 | hex "Offset to which the TPL should be padded before appending the TPL payload" |
| 113 | depends on TPL && !TPL_FRAMEWORK |
| 114 | default TPL_MAX_SIZE |
| 115 | help |
| 116 | Image offset to which the TPL should be padded before appending the |
| 117 | TPL payload. By default, this is defined as CONFIG_TPL_MAX_SIZE, or 0 if |
| 118 | CONFIG_TPL_MAX_SIZE is undefined. CONFIG_TPL_PAD_TO must be either |
| 119 | 0, meaning to append the TPL payload without any padding, or >= |
| 120 | CONFIG_TPL_MAX_SIZE. |
| 121 | endmenu |
| 122 | |
| 123 | endmenu |
| 124 | |