Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 1 | /* |
| 2 | * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC |
| 3 | * |
| 4 | * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com> |
| 5 | * |
| 6 | * Licensed under GPLv2 or later. |
| 7 | */ |
| 8 | |
| 9 | #include "skeleton.dtsi" |
| 10 | #include <dt-bindings/pinctrl/at91.h> |
| 11 | #include <dt-bindings/clock/at91.h> |
| 12 | #include <dt-bindings/interrupt-controller/irq.h> |
| 13 | #include <dt-bindings/gpio/gpio.h> |
| 14 | #include <dt-bindings/pwm/pwm.h> |
| 15 | |
| 16 | / { |
| 17 | model = "Atmel AT91SAM9RL family SoC"; |
| 18 | compatible = "atmel,at91sam9rl", "atmel,at91sam9"; |
| 19 | interrupt-parent = <&aic>; |
| 20 | |
| 21 | aliases { |
| 22 | serial0 = &dbgu; |
| 23 | serial1 = &usart0; |
| 24 | serial2 = &usart1; |
| 25 | serial3 = &usart2; |
| 26 | serial4 = &usart3; |
| 27 | gpio0 = &pioA; |
| 28 | gpio1 = &pioB; |
| 29 | gpio2 = &pioC; |
| 30 | gpio3 = &pioD; |
| 31 | tcb0 = &tcb0; |
| 32 | i2c0 = &i2c0; |
| 33 | i2c1 = &i2c1; |
| 34 | ssc0 = &ssc0; |
| 35 | ssc1 = &ssc1; |
| 36 | pwm0 = &pwm0; |
Wenyou.Yang@microchip.com | 56a61e5 | 2017-07-21 13:40:10 +0800 | [diff] [blame] | 37 | spi0 = &spi0; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 38 | }; |
| 39 | |
| 40 | cpus { |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 41 | cpu { |
| 42 | compatible = "arm,arm926ej-s"; |
| 43 | device_type = "cpu"; |
| 44 | }; |
| 45 | }; |
| 46 | |
| 47 | memory { |
| 48 | reg = <0x20000000 0x04000000>; |
| 49 | }; |
| 50 | |
| 51 | clocks { |
| 52 | slow_xtal: slow_xtal { |
| 53 | compatible = "fixed-clock"; |
| 54 | #clock-cells = <0>; |
| 55 | clock-frequency = <0>; |
| 56 | }; |
| 57 | |
| 58 | main_xtal: main_xtal { |
| 59 | compatible = "fixed-clock"; |
| 60 | #clock-cells = <0>; |
| 61 | clock-frequency = <0>; |
| 62 | }; |
| 63 | |
| 64 | adc_op_clk: adc_op_clk{ |
| 65 | compatible = "fixed-clock"; |
| 66 | #clock-cells = <0>; |
| 67 | clock-frequency = <1000000>; |
| 68 | }; |
| 69 | }; |
| 70 | |
| 71 | sram: sram@00300000 { |
| 72 | compatible = "mmio-sram"; |
| 73 | reg = <0x00300000 0x10000>; |
| 74 | }; |
| 75 | |
| 76 | ahb { |
| 77 | compatible = "simple-bus"; |
| 78 | #address-cells = <1>; |
| 79 | #size-cells = <1>; |
| 80 | ranges; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 81 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 82 | |
| 83 | fb0: fb@00500000 { |
| 84 | compatible = "atmel,at91sam9rl-lcdc"; |
| 85 | reg = <0x00500000 0x1000>; |
| 86 | interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; |
| 87 | pinctrl-names = "default"; |
| 88 | pinctrl-0 = <&pinctrl_fb>; |
| 89 | clocks = <&lcd_clk>, <&lcd_clk>; |
| 90 | clock-names = "hclk", "lcdc_clk"; |
| 91 | status = "disabled"; |
| 92 | }; |
| 93 | |
| 94 | nand0: nand@40000000 { |
| 95 | compatible = "atmel,at91rm9200-nand"; |
| 96 | #address-cells = <1>; |
| 97 | #size-cells = <1>; |
| 98 | reg = <0x40000000 0x10000000>, |
| 99 | <0xffffe800 0x200>; |
| 100 | atmel,nand-addr-offset = <21>; |
| 101 | atmel,nand-cmd-offset = <22>; |
| 102 | atmel,nand-has-dma; |
| 103 | pinctrl-names = "default"; |
| 104 | pinctrl-0 = <&pinctrl_nand>; |
| 105 | gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, |
| 106 | <&pioB 6 GPIO_ACTIVE_HIGH>, |
| 107 | <0>; |
| 108 | status = "disabled"; |
| 109 | }; |
| 110 | |
| 111 | apb { |
| 112 | compatible = "simple-bus"; |
| 113 | #address-cells = <1>; |
| 114 | #size-cells = <1>; |
| 115 | ranges; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 116 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 117 | |
| 118 | tcb0: timer@fffa0000 { |
| 119 | compatible = "atmel,at91rm9200-tcb"; |
| 120 | reg = <0xfffa0000 0x100>; |
| 121 | interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>, |
| 122 | <17 IRQ_TYPE_LEVEL_HIGH 0>, |
| 123 | <18 IRQ_TYPE_LEVEL_HIGH 0>; |
| 124 | clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&clk32k>; |
| 125 | clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; |
| 126 | }; |
| 127 | |
| 128 | mmc0: mmc@fffa4000 { |
| 129 | compatible = "atmel,hsmci"; |
| 130 | reg = <0xfffa4000 0x600>; |
| 131 | interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; |
| 132 | #address-cells = <1>; |
| 133 | #size-cells = <0>; |
| 134 | pinctrl-names = "default"; |
| 135 | clocks = <&mci0_clk>; |
| 136 | clock-names = "mci_clk"; |
| 137 | status = "disabled"; |
| 138 | }; |
| 139 | |
| 140 | i2c0: i2c@fffa8000 { |
| 141 | compatible = "atmel,at91sam9260-i2c"; |
| 142 | reg = <0xfffa8000 0x100>; |
| 143 | interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; |
| 144 | #address-cells = <1>; |
| 145 | #size-cells = <0>; |
| 146 | clocks = <&twi0_clk>; |
| 147 | status = "disabled"; |
| 148 | }; |
| 149 | |
| 150 | i2c1: i2c@fffac000 { |
| 151 | compatible = "atmel,at91sam9260-i2c"; |
| 152 | reg = <0xfffac000 0x100>; |
| 153 | interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; |
| 154 | #address-cells = <1>; |
| 155 | #size-cells = <0>; |
| 156 | status = "disabled"; |
| 157 | }; |
| 158 | |
| 159 | usart0: serial@fffb0000 { |
| 160 | compatible = "atmel,at91sam9260-usart"; |
| 161 | reg = <0xfffb0000 0x200>; |
| 162 | interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; |
| 163 | atmel,use-dma-rx; |
| 164 | atmel,use-dma-tx; |
| 165 | pinctrl-names = "default"; |
| 166 | pinctrl-0 = <&pinctrl_usart0>; |
| 167 | clocks = <&usart0_clk>; |
| 168 | clock-names = "usart"; |
| 169 | status = "disabled"; |
| 170 | }; |
| 171 | |
| 172 | usart1: serial@fffb4000 { |
| 173 | compatible = "atmel,at91sam9260-usart"; |
| 174 | reg = <0xfffb4000 0x200>; |
| 175 | interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; |
| 176 | atmel,use-dma-rx; |
| 177 | atmel,use-dma-tx; |
| 178 | pinctrl-names = "default"; |
| 179 | pinctrl-0 = <&pinctrl_usart1>; |
| 180 | clocks = <&usart1_clk>; |
| 181 | clock-names = "usart"; |
| 182 | status = "disabled"; |
| 183 | }; |
| 184 | |
| 185 | usart2: serial@fffb8000 { |
| 186 | compatible = "atmel,at91sam9260-usart"; |
| 187 | reg = <0xfffb8000 0x200>; |
| 188 | interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; |
| 189 | atmel,use-dma-rx; |
| 190 | atmel,use-dma-tx; |
| 191 | pinctrl-names = "default"; |
| 192 | pinctrl-0 = <&pinctrl_usart2>; |
| 193 | clocks = <&usart2_clk>; |
| 194 | clock-names = "usart"; |
| 195 | status = "disabled"; |
| 196 | }; |
| 197 | |
| 198 | usart3: serial@fffbc000 { |
| 199 | compatible = "atmel,at91sam9260-usart"; |
| 200 | reg = <0xfffbc000 0x200>; |
| 201 | interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; |
| 202 | atmel,use-dma-rx; |
| 203 | atmel,use-dma-tx; |
| 204 | pinctrl-names = "default"; |
| 205 | pinctrl-0 = <&pinctrl_usart3>; |
| 206 | clocks = <&usart3_clk>; |
| 207 | clock-names = "usart"; |
| 208 | status = "disabled"; |
| 209 | }; |
| 210 | |
| 211 | ssc0: ssc@fffc0000 { |
| 212 | compatible = "atmel,at91sam9rl-ssc"; |
| 213 | reg = <0xfffc0000 0x4000>; |
| 214 | interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; |
| 215 | pinctrl-names = "default"; |
| 216 | pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; |
| 217 | status = "disabled"; |
| 218 | }; |
| 219 | |
| 220 | ssc1: ssc@fffc4000 { |
| 221 | compatible = "atmel,at91sam9rl-ssc"; |
| 222 | reg = <0xfffc4000 0x4000>; |
| 223 | interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; |
| 224 | pinctrl-names = "default"; |
| 225 | pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; |
| 226 | status = "disabled"; |
| 227 | }; |
| 228 | |
| 229 | pwm0: pwm@fffc8000 { |
| 230 | compatible = "atmel,at91sam9rl-pwm"; |
| 231 | reg = <0xfffc8000 0x300>; |
| 232 | interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; |
| 233 | #pwm-cells = <3>; |
| 234 | clocks = <&pwm_clk>; |
| 235 | clock-names = "pwm_clk"; |
| 236 | status = "disabled"; |
| 237 | }; |
| 238 | |
| 239 | spi0: spi@fffcc000 { |
| 240 | #address-cells = <1>; |
| 241 | #size-cells = <0>; |
| 242 | compatible = "atmel,at91rm9200-spi"; |
| 243 | reg = <0xfffcc000 0x200>; |
| 244 | interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; |
| 245 | pinctrl-names = "default"; |
| 246 | pinctrl-0 = <&pinctrl_spi0>; |
| 247 | clocks = <&spi0_clk>; |
| 248 | clock-names = "spi_clk"; |
| 249 | status = "disabled"; |
| 250 | }; |
| 251 | |
| 252 | adc0: adc@fffd0000 { |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 253 | compatible = "atmel,at91sam9rl-adc"; |
| 254 | reg = <0xfffd0000 0x100>; |
| 255 | interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; |
| 256 | clocks = <&adc_clk>, <&adc_op_clk>; |
| 257 | clock-names = "adc_clk", "adc_op_clk"; |
| 258 | atmel,adc-use-external-triggers; |
| 259 | atmel,adc-channels-used = <0x3f>; |
| 260 | atmel,adc-vref = <3300>; |
| 261 | atmel,adc-startup-time = <40>; |
| 262 | atmel,adc-res = <8 10>; |
| 263 | atmel,adc-res-names = "lowres", "highres"; |
| 264 | atmel,adc-use-res = "highres"; |
| 265 | |
| 266 | trigger0 { |
| 267 | trigger-name = "timer-counter-0"; |
| 268 | trigger-value = <0x1>; |
| 269 | }; |
| 270 | trigger1 { |
| 271 | trigger-name = "timer-counter-1"; |
| 272 | trigger-value = <0x3>; |
| 273 | }; |
| 274 | |
| 275 | trigger2 { |
| 276 | trigger-name = "timer-counter-2"; |
| 277 | trigger-value = <0x5>; |
| 278 | }; |
| 279 | |
| 280 | trigger3 { |
| 281 | trigger-name = "external"; |
| 282 | trigger-value = <0x13>; |
| 283 | trigger-external; |
| 284 | }; |
| 285 | }; |
| 286 | |
| 287 | usb0: gadget@fffd4000 { |
| 288 | #address-cells = <1>; |
| 289 | #size-cells = <0>; |
| 290 | compatible = "atmel,at91sam9rl-udc"; |
| 291 | reg = <0x00600000 0x100000>, |
| 292 | <0xfffd4000 0x4000>; |
| 293 | interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; |
| 294 | clocks = <&udphs_clk>, <&utmi>; |
| 295 | clock-names = "pclk", "hclk"; |
| 296 | status = "disabled"; |
| 297 | |
| 298 | ep@0 { |
| 299 | reg = <0>; |
| 300 | atmel,fifo-size = <64>; |
| 301 | atmel,nb-banks = <1>; |
| 302 | }; |
| 303 | |
| 304 | ep@1 { |
| 305 | reg = <1>; |
| 306 | atmel,fifo-size = <1024>; |
| 307 | atmel,nb-banks = <2>; |
| 308 | atmel,can-dma; |
| 309 | atmel,can-isoc; |
| 310 | }; |
| 311 | |
| 312 | ep@2 { |
| 313 | reg = <2>; |
| 314 | atmel,fifo-size = <1024>; |
| 315 | atmel,nb-banks = <2>; |
| 316 | atmel,can-dma; |
| 317 | atmel,can-isoc; |
| 318 | }; |
| 319 | |
| 320 | ep@3 { |
| 321 | reg = <3>; |
| 322 | atmel,fifo-size = <1024>; |
| 323 | atmel,nb-banks = <3>; |
| 324 | atmel,can-dma; |
| 325 | }; |
| 326 | |
| 327 | ep@4 { |
| 328 | reg = <4>; |
| 329 | atmel,fifo-size = <1024>; |
| 330 | atmel,nb-banks = <3>; |
| 331 | atmel,can-dma; |
| 332 | }; |
| 333 | |
| 334 | ep@5 { |
| 335 | reg = <5>; |
| 336 | atmel,fifo-size = <1024>; |
| 337 | atmel,nb-banks = <3>; |
| 338 | atmel,can-dma; |
| 339 | atmel,can-isoc; |
| 340 | }; |
| 341 | |
| 342 | ep@6 { |
| 343 | reg = <6>; |
| 344 | atmel,fifo-size = <1024>; |
| 345 | atmel,nb-banks = <3>; |
| 346 | atmel,can-dma; |
| 347 | atmel,can-isoc; |
| 348 | }; |
| 349 | }; |
| 350 | |
| 351 | dma0: dma-controller@ffffe600 { |
| 352 | compatible = "atmel,at91sam9rl-dma"; |
| 353 | reg = <0xffffe600 0x200>; |
| 354 | interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; |
| 355 | #dma-cells = <2>; |
| 356 | clocks = <&dma0_clk>; |
| 357 | clock-names = "dma_clk"; |
| 358 | }; |
| 359 | |
| 360 | ramc0: ramc@ffffea00 { |
| 361 | compatible = "atmel,at91sam9260-sdramc"; |
| 362 | reg = <0xffffea00 0x200>; |
| 363 | }; |
| 364 | |
| 365 | aic: interrupt-controller@fffff000 { |
| 366 | #interrupt-cells = <3>; |
| 367 | compatible = "atmel,at91rm9200-aic"; |
| 368 | interrupt-controller; |
| 369 | reg = <0xfffff000 0x200>; |
| 370 | atmel,external-irqs = <31>; |
| 371 | }; |
| 372 | |
| 373 | dbgu: serial@fffff200 { |
| 374 | compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; |
| 375 | reg = <0xfffff200 0x200>; |
| 376 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 377 | pinctrl-names = "default"; |
| 378 | pinctrl-0 = <&pinctrl_dbgu>; |
| 379 | clocks = <&mck>; |
| 380 | clock-names = "usart"; |
| 381 | status = "disabled"; |
| 382 | }; |
| 383 | |
| 384 | pinctrl@fffff400 { |
| 385 | #address-cells = <1>; |
| 386 | #size-cells = <1>; |
| 387 | compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; |
| 388 | ranges = <0xfffff400 0xfffff400 0x800>; |
| 389 | reg = <0xfffff400 0x200 |
| 390 | 0xfffff600 0x200 |
| 391 | 0xfffff800 0x200 |
| 392 | 0xfffffa00 0x200 |
| 393 | >; |
| 394 | |
| 395 | atmel,mux-mask = |
| 396 | /* A B */ |
| 397 | <0xffffffff 0xe05c6738>, /* pioA */ |
| 398 | <0xffffffff 0x0000c780>, /* pioB */ |
| 399 | <0xffffffff 0xe3ffff0e>, /* pioC */ |
| 400 | <0x003fffff 0x0001ff3c>; /* pioD */ |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 401 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 402 | |
| 403 | /* shared pinctrl settings */ |
| 404 | adc0 { |
| 405 | pinctrl_adc0_ts: adc0_ts-0 { |
| 406 | atmel,pins = |
| 407 | <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 408 | <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 409 | <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 410 | <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 411 | }; |
| 412 | |
| 413 | pinctrl_adc0_ad0: adc0_ad0-0 { |
| 414 | atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 415 | }; |
| 416 | |
| 417 | pinctrl_adc0_ad1: adc0_ad1-0 { |
| 418 | atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 419 | }; |
| 420 | |
| 421 | pinctrl_adc0_ad2: adc0_ad2-0 { |
| 422 | atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 423 | }; |
| 424 | |
| 425 | pinctrl_adc0_ad3: adc0_ad3-0 { |
| 426 | atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 427 | }; |
| 428 | |
| 429 | pinctrl_adc0_ad4: adc0_ad4-0 { |
| 430 | atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 431 | }; |
| 432 | |
| 433 | pinctrl_adc0_ad5: adc0_ad5-0 { |
| 434 | atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 435 | }; |
| 436 | |
| 437 | pinctrl_adc0_adtrg: adc0_adtrg-0 { |
| 438 | atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 439 | }; |
| 440 | }; |
| 441 | |
| 442 | dbgu { |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 443 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 444 | pinctrl_dbgu: dbgu-0 { |
| 445 | atmel,pins = |
| 446 | <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 447 | <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 448 | }; |
| 449 | }; |
| 450 | |
| 451 | fb { |
| 452 | pinctrl_fb: fb-0 { |
| 453 | atmel,pins = |
| 454 | <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 455 | <AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 456 | <AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 457 | <AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 458 | <AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 459 | <AT91_PIOC 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 460 | <AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 461 | <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 462 | <AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 463 | <AT91_PIOC 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 464 | <AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 465 | <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 466 | <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 467 | <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 468 | <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 469 | <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 470 | <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 471 | <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 472 | <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 473 | <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 474 | <AT91_PIOC 25 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 475 | }; |
| 476 | }; |
| 477 | |
| 478 | i2c_gpio0 { |
| 479 | pinctrl_i2c_gpio0: i2c_gpio0-0 { |
| 480 | atmel,pins = |
| 481 | <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, |
| 482 | <AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; |
| 483 | }; |
| 484 | }; |
| 485 | |
| 486 | i2c_gpio1 { |
| 487 | pinctrl_i2c_gpio1: i2c_gpio1-0 { |
| 488 | atmel,pins = |
| 489 | <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>, |
| 490 | <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; |
| 491 | }; |
| 492 | }; |
| 493 | |
| 494 | mmc0 { |
| 495 | pinctrl_mmc0_clk: mmc0_clk-0 { |
| 496 | atmel,pins = |
| 497 | <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 498 | }; |
| 499 | |
| 500 | pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { |
| 501 | atmel,pins = |
| 502 | <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 503 | <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; |
| 504 | }; |
| 505 | |
| 506 | pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { |
| 507 | atmel,pins = |
| 508 | <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 509 | <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 510 | <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; |
| 511 | }; |
| 512 | }; |
| 513 | |
| 514 | nand { |
| 515 | pinctrl_nand: nand-0 { |
| 516 | atmel,pins = |
| 517 | <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>, |
| 518 | <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; |
| 519 | }; |
| 520 | |
| 521 | pinctrl_nand0_ale_cle: nand_ale_cle-0 { |
| 522 | atmel,pins = |
| 523 | <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 524 | <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 525 | }; |
| 526 | |
| 527 | pinctrl_nand0_oe_we: nand_oe_we-0 { |
| 528 | atmel,pins = |
| 529 | <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 530 | <AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 531 | }; |
| 532 | |
| 533 | pinctrl_nand0_cs: nand_cs-0 { |
| 534 | atmel,pins = |
| 535 | <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 536 | }; |
| 537 | }; |
| 538 | |
| 539 | pwm0 { |
| 540 | pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { |
| 541 | atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 542 | }; |
| 543 | |
| 544 | pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { |
| 545 | atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 546 | }; |
| 547 | |
| 548 | pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { |
| 549 | atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 550 | }; |
| 551 | |
| 552 | pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { |
| 553 | atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 554 | }; |
| 555 | |
| 556 | pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { |
| 557 | atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 558 | }; |
| 559 | |
| 560 | pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { |
| 561 | atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 562 | }; |
| 563 | |
| 564 | pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { |
| 565 | atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 566 | }; |
| 567 | |
| 568 | pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { |
| 569 | atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 570 | }; |
| 571 | |
| 572 | pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 { |
| 573 | atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 574 | }; |
| 575 | |
| 576 | pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { |
| 577 | atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 578 | }; |
| 579 | |
| 580 | pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { |
| 581 | atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 582 | }; |
| 583 | }; |
| 584 | |
| 585 | spi0 { |
| 586 | pinctrl_spi0: spi0-0 { |
| 587 | atmel,pins = |
| 588 | <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 589 | <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 590 | <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 591 | }; |
| 592 | }; |
| 593 | |
| 594 | ssc0 { |
| 595 | pinctrl_ssc0_tx: ssc0_tx-0 { |
| 596 | atmel,pins = |
| 597 | <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 598 | <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 599 | <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 600 | }; |
| 601 | |
| 602 | pinctrl_ssc0_rx: ssc0_rx-0 { |
| 603 | atmel,pins = |
| 604 | <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 605 | <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 606 | <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 607 | }; |
| 608 | }; |
| 609 | |
| 610 | ssc1 { |
| 611 | pinctrl_ssc1_tx: ssc1_tx-0 { |
| 612 | atmel,pins = |
| 613 | <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 614 | <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 615 | <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 616 | }; |
| 617 | |
| 618 | pinctrl_ssc1_rx: ssc1_rx-0 { |
| 619 | atmel,pins = |
| 620 | <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 621 | <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>, |
| 622 | <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 623 | }; |
| 624 | }; |
| 625 | |
| 626 | tcb0 { |
| 627 | pinctrl_tcb0_tclk0: tcb0_tclk0-0 { |
| 628 | atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 629 | }; |
| 630 | |
| 631 | pinctrl_tcb0_tclk1: tcb0_tclk1-0 { |
| 632 | atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 633 | }; |
| 634 | |
| 635 | pinctrl_tcb0_tclk2: tcb0_tclk2-0 { |
| 636 | atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 637 | }; |
| 638 | |
| 639 | pinctrl_tcb0_tioa0: tcb0_tioa0-0 { |
| 640 | atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 641 | }; |
| 642 | |
| 643 | pinctrl_tcb0_tioa1: tcb0_tioa1-0 { |
| 644 | atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 645 | }; |
| 646 | |
| 647 | pinctrl_tcb0_tioa2: tcb0_tioa2-0 { |
| 648 | atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 649 | }; |
| 650 | |
| 651 | pinctrl_tcb0_tiob0: tcb0_tiob0-0 { |
| 652 | atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 653 | }; |
| 654 | |
| 655 | pinctrl_tcb0_tiob1: tcb0_tiob1-0 { |
| 656 | atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 657 | }; |
| 658 | |
| 659 | pinctrl_tcb0_tiob2: tcb0_tiob2-0 { |
| 660 | atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 661 | }; |
| 662 | }; |
| 663 | |
| 664 | usart0 { |
| 665 | pinctrl_usart0: usart0-0 { |
| 666 | atmel,pins = |
| 667 | <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 668 | <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; |
| 669 | }; |
| 670 | |
| 671 | pinctrl_usart0_rts: usart0_rts-0 { |
| 672 | atmel,pins = |
| 673 | <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 674 | }; |
| 675 | |
| 676 | pinctrl_usart0_cts: usart0_cts-0 { |
| 677 | atmel,pins = |
| 678 | <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 679 | }; |
| 680 | |
| 681 | pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 { |
| 682 | atmel,pins = |
| 683 | <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>, |
| 684 | <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 685 | }; |
| 686 | |
| 687 | pinctrl_usart0_dcd: usart0_dcd-0 { |
| 688 | atmel,pins = |
| 689 | <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 690 | }; |
| 691 | |
| 692 | pinctrl_usart0_ri: usart0_ri-0 { |
| 693 | atmel,pins = |
| 694 | <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 695 | }; |
| 696 | |
| 697 | pinctrl_usart0_sck: usart0_sck-0 { |
| 698 | atmel,pins = |
| 699 | <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 700 | }; |
| 701 | }; |
| 702 | |
| 703 | usart1 { |
| 704 | pinctrl_usart1: usart1-0 { |
| 705 | atmel,pins = |
| 706 | <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 707 | <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 708 | }; |
| 709 | |
| 710 | pinctrl_usart1_rts: usart1_rts-0 { |
| 711 | atmel,pins = |
| 712 | <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 713 | }; |
| 714 | |
| 715 | pinctrl_usart1_cts: usart1_cts-0 { |
| 716 | atmel,pins = |
| 717 | <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 718 | }; |
| 719 | |
| 720 | pinctrl_usart1_sck: usart1_sck-0 { |
| 721 | atmel,pins = |
| 722 | <AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 723 | }; |
| 724 | }; |
| 725 | |
| 726 | usart2 { |
| 727 | pinctrl_usart2: usart2-0 { |
| 728 | atmel,pins = |
| 729 | <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 730 | <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 731 | }; |
| 732 | |
| 733 | pinctrl_usart2_rts: usart2_rts-0 { |
| 734 | atmel,pins = |
| 735 | <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 736 | }; |
| 737 | |
| 738 | pinctrl_usart2_cts: usart2_cts-0 { |
| 739 | atmel,pins = |
| 740 | <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 741 | }; |
| 742 | |
| 743 | pinctrl_usart2_sck: usart2_sck-0 { |
| 744 | atmel,pins = |
| 745 | <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 746 | }; |
| 747 | }; |
| 748 | |
| 749 | usart3 { |
| 750 | pinctrl_usart3: usart3-0 { |
| 751 | atmel,pins = |
| 752 | <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, |
| 753 | <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>; |
| 754 | }; |
| 755 | |
| 756 | pinctrl_usart3_rts: usart3_rts-0 { |
| 757 | atmel,pins = |
| 758 | <AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 759 | }; |
| 760 | |
| 761 | pinctrl_usart3_cts: usart3_cts-0 { |
| 762 | atmel,pins = |
| 763 | <AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 764 | }; |
| 765 | |
| 766 | pinctrl_usart3_sck: usart3_sck-0 { |
| 767 | atmel,pins = |
| 768 | <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; |
| 769 | }; |
| 770 | }; |
| 771 | }; |
| 772 | |
| 773 | pioA: gpio@fffff400 { |
| 774 | compatible = "atmel,at91rm9200-gpio"; |
| 775 | reg = <0xfffff400 0x200>; |
| 776 | interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; |
| 777 | #gpio-cells = <2>; |
| 778 | gpio-controller; |
| 779 | interrupt-controller; |
| 780 | #interrupt-cells = <2>; |
| 781 | clocks = <&pioA_clk>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 782 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 783 | }; |
| 784 | |
| 785 | pioB: gpio@fffff600 { |
| 786 | compatible = "atmel,at91rm9200-gpio"; |
| 787 | reg = <0xfffff600 0x200>; |
| 788 | interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; |
| 789 | #gpio-cells = <2>; |
| 790 | gpio-controller; |
| 791 | interrupt-controller; |
| 792 | #interrupt-cells = <2>; |
| 793 | clocks = <&pioB_clk>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 794 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 795 | }; |
| 796 | |
| 797 | pioC: gpio@fffff800 { |
| 798 | compatible = "atmel,at91rm9200-gpio"; |
| 799 | reg = <0xfffff800 0x200>; |
| 800 | interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; |
| 801 | #gpio-cells = <2>; |
| 802 | gpio-controller; |
| 803 | interrupt-controller; |
| 804 | #interrupt-cells = <2>; |
| 805 | clocks = <&pioC_clk>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 806 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 807 | }; |
| 808 | |
| 809 | pioD: gpio@fffffa00 { |
| 810 | compatible = "atmel,at91rm9200-gpio"; |
| 811 | reg = <0xfffffa00 0x200>; |
| 812 | interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; |
| 813 | #gpio-cells = <2>; |
| 814 | gpio-controller; |
| 815 | interrupt-controller; |
| 816 | #interrupt-cells = <2>; |
| 817 | clocks = <&pioD_clk>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 818 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 819 | }; |
| 820 | |
| 821 | pmc: pmc@fffffc00 { |
| 822 | compatible = "atmel,at91sam9g45-pmc", "syscon"; |
| 823 | reg = <0xfffffc00 0x100>; |
| 824 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 825 | interrupt-controller; |
| 826 | #address-cells = <1>; |
| 827 | #size-cells = <0>; |
| 828 | #interrupt-cells = <1>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 829 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 830 | |
| 831 | main: mainck { |
| 832 | compatible = "atmel,at91rm9200-clk-main"; |
| 833 | #clock-cells = <0>; |
| 834 | interrupts-extended = <&pmc AT91_PMC_MOSCS>; |
| 835 | clocks = <&main_xtal>; |
| 836 | }; |
| 837 | |
| 838 | plla: pllack@0 { |
| 839 | compatible = "atmel,at91rm9200-clk-pll"; |
| 840 | #clock-cells = <0>; |
| 841 | interrupts-extended = <&pmc AT91_PMC_LOCKA>; |
| 842 | clocks = <&main>; |
| 843 | reg = <0>; |
| 844 | atmel,clk-input-range = <1000000 32000000>; |
| 845 | #atmel,pll-clk-output-range-cells = <3>; |
| 846 | atmel,pll-clk-output-ranges = <80000000 200000000 0>, |
| 847 | <190000000 240000000 2>; |
| 848 | }; |
| 849 | |
| 850 | utmi: utmick { |
| 851 | compatible = "atmel,at91sam9x5-clk-utmi"; |
| 852 | #clock-cells = <0>; |
| 853 | interrupt-parent = <&pmc>; |
| 854 | interrupts = <AT91_PMC_LOCKU>; |
| 855 | clocks = <&main>; |
| 856 | }; |
| 857 | |
| 858 | mck: masterck { |
| 859 | compatible = "atmel,at91rm9200-clk-master"; |
| 860 | #clock-cells = <0>; |
| 861 | interrupts-extended = <&pmc AT91_PMC_MCKRDY>; |
| 862 | clocks = <&clk32k>, <&main>, <&plla>, <&utmi>; |
| 863 | atmel,clk-output-range = <0 94000000>; |
| 864 | atmel,clk-divisors = <1 2 4 0>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 865 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 866 | }; |
| 867 | |
| 868 | prog: progck { |
| 869 | compatible = "atmel,at91rm9200-clk-programmable"; |
| 870 | #address-cells = <1>; |
| 871 | #size-cells = <0>; |
| 872 | interrupt-parent = <&pmc>; |
| 873 | clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>; |
| 874 | |
| 875 | prog0: prog@0 { |
| 876 | #clock-cells = <0>; |
| 877 | reg = <0>; |
| 878 | interrupts = <AT91_PMC_PCKRDY(0)>; |
| 879 | }; |
| 880 | |
| 881 | prog1: prog@1 { |
| 882 | #clock-cells = <0>; |
| 883 | reg = <1>; |
| 884 | interrupts = <AT91_PMC_PCKRDY(1)>; |
| 885 | }; |
| 886 | }; |
| 887 | |
| 888 | systemck { |
| 889 | compatible = "atmel,at91rm9200-clk-system"; |
| 890 | #address-cells = <1>; |
| 891 | #size-cells = <0>; |
| 892 | |
| 893 | pck0: pck0@8 { |
| 894 | #clock-cells = <0>; |
| 895 | reg = <8>; |
| 896 | clocks = <&prog0>; |
| 897 | }; |
| 898 | |
| 899 | pck1: pck1@9 { |
| 900 | #clock-cells = <0>; |
| 901 | reg = <9>; |
| 902 | clocks = <&prog1>; |
| 903 | }; |
| 904 | |
| 905 | }; |
| 906 | |
| 907 | periphck { |
| 908 | compatible = "atmel,at91rm9200-clk-peripheral"; |
| 909 | #address-cells = <1>; |
| 910 | #size-cells = <0>; |
| 911 | clocks = <&mck>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 912 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 913 | |
| 914 | pioA_clk: pioA_clk@2 { |
| 915 | #clock-cells = <0>; |
| 916 | reg = <2>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 917 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 918 | }; |
| 919 | |
| 920 | pioB_clk: pioB_clk@3 { |
| 921 | #clock-cells = <0>; |
| 922 | reg = <3>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 923 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 924 | }; |
| 925 | |
| 926 | pioC_clk: pioC_clk@4 { |
| 927 | #clock-cells = <0>; |
| 928 | reg = <4>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 929 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 930 | }; |
| 931 | |
| 932 | pioD_clk: pioD_clk@5 { |
| 933 | #clock-cells = <0>; |
| 934 | reg = <5>; |
Simon Glass | 8c103c3 | 2023-02-13 08:56:33 -0700 | [diff] [blame] | 935 | bootph-all; |
Wenyou Yang | 1e315a3 | 2017-04-18 13:49:38 +0800 | [diff] [blame] | 936 | }; |
| 937 | |
| 938 | usart0_clk: usart0_clk@6 { |
| 939 | #clock-cells = <0>; |
| 940 | reg = <6>; |
| 941 | }; |
| 942 | |
| 943 | usart1_clk: usart1_clk@7 { |
| 944 | #clock-cells = <0>; |
| 945 | reg = <7>; |
| 946 | }; |
| 947 | |
| 948 | usart2_clk: usart2_clk@8 { |
| 949 | #clock-cells = <0>; |
| 950 | reg = <8>; |
| 951 | }; |
| 952 | |
| 953 | usart3_clk: usart3_clk@9 { |
| 954 | #clock-cells = <0>; |
| 955 | reg = <9>; |
| 956 | }; |
| 957 | |
| 958 | mci0_clk: mci0_clk@10 { |
| 959 | #clock-cells = <0>; |
| 960 | reg = <10>; |
| 961 | }; |
| 962 | |
| 963 | twi0_clk: twi0_clk@11 { |
| 964 | #clock-cells = <0>; |
| 965 | reg = <11>; |
| 966 | }; |
| 967 | |
| 968 | twi1_clk: twi1_clk@12 { |
| 969 | #clock-cells = <0>; |
| 970 | reg = <12>; |
| 971 | }; |
| 972 | |
| 973 | spi0_clk: spi0_clk@13 { |
| 974 | #clock-cells = <0>; |
| 975 | reg = <13>; |
| 976 | }; |
| 977 | |
| 978 | ssc0_clk: ssc0_clk@14 { |
| 979 | #clock-cells = <0>; |
| 980 | reg = <14>; |
| 981 | }; |
| 982 | |
| 983 | ssc1_clk: ssc1_clk@15 { |
| 984 | #clock-cells = <0>; |
| 985 | reg = <15>; |
| 986 | }; |
| 987 | |
| 988 | tc0_clk: tc0_clk@16 { |
| 989 | #clock-cells = <0>; |
| 990 | reg = <16>; |
| 991 | }; |
| 992 | |
| 993 | tc1_clk: tc1_clk@17 { |
| 994 | #clock-cells = <0>; |
| 995 | reg = <17>; |
| 996 | }; |
| 997 | |
| 998 | tc2_clk: tc2_clk@18 { |
| 999 | #clock-cells = <0>; |
| 1000 | reg = <18>; |
| 1001 | }; |
| 1002 | |
| 1003 | pwm_clk: pwm_clk@19 { |
| 1004 | #clock-cells = <0>; |
| 1005 | reg = <19>; |
| 1006 | }; |
| 1007 | |
| 1008 | adc_clk: adc_clk@20 { |
| 1009 | #clock-cells = <0>; |
| 1010 | reg = <20>; |
| 1011 | }; |
| 1012 | |
| 1013 | dma0_clk: dma0_clk@21 { |
| 1014 | #clock-cells = <0>; |
| 1015 | reg = <21>; |
| 1016 | }; |
| 1017 | |
| 1018 | udphs_clk: udphs_clk@22 { |
| 1019 | #clock-cells = <0>; |
| 1020 | reg = <22>; |
| 1021 | }; |
| 1022 | |
| 1023 | lcd_clk: lcd_clk@23 { |
| 1024 | #clock-cells = <0>; |
| 1025 | reg = <23>; |
| 1026 | }; |
| 1027 | }; |
| 1028 | }; |
| 1029 | |
| 1030 | rstc@fffffd00 { |
| 1031 | compatible = "atmel,at91sam9260-rstc"; |
| 1032 | reg = <0xfffffd00 0x10>; |
| 1033 | clocks = <&clk32k>; |
| 1034 | }; |
| 1035 | |
| 1036 | shdwc@fffffd10 { |
| 1037 | compatible = "atmel,at91sam9260-shdwc"; |
| 1038 | reg = <0xfffffd10 0x10>; |
| 1039 | clocks = <&clk32k>; |
| 1040 | }; |
| 1041 | |
| 1042 | pit: timer@fffffd30 { |
| 1043 | compatible = "atmel,at91sam9260-pit"; |
| 1044 | reg = <0xfffffd30 0xf>; |
| 1045 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1046 | clocks = <&mck>; |
| 1047 | }; |
| 1048 | |
| 1049 | watchdog@fffffd40 { |
| 1050 | compatible = "atmel,at91sam9260-wdt"; |
| 1051 | reg = <0xfffffd40 0x10>; |
| 1052 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1053 | clocks = <&clk32k>; |
| 1054 | status = "disabled"; |
| 1055 | }; |
| 1056 | |
| 1057 | sckc@fffffd50 { |
| 1058 | compatible = "atmel,at91sam9x5-sckc"; |
| 1059 | reg = <0xfffffd50 0x4>; |
| 1060 | |
| 1061 | slow_osc: slow_osc { |
| 1062 | compatible = "atmel,at91sam9x5-clk-slow-osc"; |
| 1063 | #clock-cells = <0>; |
| 1064 | atmel,startup-time-usec = <1200000>; |
| 1065 | clocks = <&slow_xtal>; |
| 1066 | }; |
| 1067 | |
| 1068 | slow_rc_osc: slow_rc_osc { |
| 1069 | compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; |
| 1070 | #clock-cells = <0>; |
| 1071 | atmel,startup-time-usec = <75>; |
| 1072 | clock-frequency = <32768>; |
| 1073 | clock-accuracy = <50000000>; |
| 1074 | }; |
| 1075 | |
| 1076 | clk32k: slck { |
| 1077 | compatible = "atmel,at91sam9x5-clk-slow"; |
| 1078 | #clock-cells = <0>; |
| 1079 | clocks = <&slow_rc_osc &slow_osc>; |
| 1080 | }; |
| 1081 | }; |
| 1082 | |
| 1083 | rtc@fffffd20 { |
| 1084 | compatible = "atmel,at91sam9260-rtt"; |
| 1085 | reg = <0xfffffd20 0x10>; |
| 1086 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1087 | clocks = <&clk32k>; |
| 1088 | status = "disabled"; |
| 1089 | }; |
| 1090 | |
| 1091 | gpbr: syscon@fffffd60 { |
| 1092 | compatible = "atmel,at91sam9260-gpbr", "syscon"; |
| 1093 | reg = <0xfffffd60 0x10>; |
| 1094 | status = "disabled"; |
| 1095 | }; |
| 1096 | |
| 1097 | rtc@fffffe00 { |
| 1098 | compatible = "atmel,at91rm9200-rtc"; |
| 1099 | reg = <0xfffffe00 0x40>; |
| 1100 | interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; |
| 1101 | clocks = <&clk32k>; |
| 1102 | status = "disabled"; |
| 1103 | }; |
| 1104 | |
| 1105 | }; |
| 1106 | }; |
| 1107 | |
| 1108 | i2c-gpio-0 { |
| 1109 | compatible = "i2c-gpio"; |
| 1110 | gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ |
| 1111 | <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ |
| 1112 | i2c-gpio,sda-open-drain; |
| 1113 | i2c-gpio,scl-open-drain; |
| 1114 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| 1115 | #address-cells = <1>; |
| 1116 | #size-cells = <0>; |
| 1117 | pinctrl-names = "default"; |
| 1118 | pinctrl-0 = <&pinctrl_i2c_gpio0>; |
| 1119 | status = "disabled"; |
| 1120 | }; |
| 1121 | |
| 1122 | i2c-gpio-1 { |
| 1123 | compatible = "i2c-gpio"; |
| 1124 | gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ |
| 1125 | <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ |
| 1126 | i2c-gpio,sda-open-drain; |
| 1127 | i2c-gpio,scl-open-drain; |
| 1128 | i2c-gpio,delay-us = <2>; /* ~100 kHz */ |
| 1129 | #address-cells = <1>; |
| 1130 | #size-cells = <0>; |
| 1131 | pinctrl-names = "default"; |
| 1132 | pinctrl-0 = <&pinctrl_i2c_gpio1>; |
| 1133 | status = "disabled"; |
| 1134 | }; |
| 1135 | }; |