blob: 6905cc02e392454c9f2770b76e8c1d688febd2aa [file] [log] [blame]
Joe Hershberger05c3e682015-03-22 17:09:10 -05001config DM_ETH
2 bool "Enable Driver Model for Ethernet drivers"
3 depends on DM
4 help
5 Enable driver model for Ethernet.
6
7 The eth_*() interface will be implemented by the UC_ETH class
8 This is currently implemented in net/eth.c
9 Look in include/net.h for details.
Joe Hershberger3ea143a2015-03-22 17:09:13 -050010
Bin Mengb68fe152015-08-27 22:25:58 -070011config PHYLIB
12 bool "Ethernet PHY (physical media interface) support"
13 help
14 Enable Ethernet PHY (physical media interface) support.
15
Joe Hershberger3ea143a2015-03-22 17:09:13 -050016menuconfig NETDEVICES
17 bool "Network device support"
18 depends on NET
Joe Hershbergeref0f2f52015-06-22 16:15:30 -050019 default y if DM_ETH
Joe Hershberger3ea143a2015-03-22 17:09:13 -050020 help
21 You must select Y to enable any network device support
22 Generally if you have any networking support this is a given
23
24 If unsure, say Y
25
26if NETDEVICES
27
Thomas Chou96fa1e42015-10-22 15:29:11 +080028config ALTERA_TSE
29 bool "Altera Triple-Speed Ethernet MAC support"
30 depends on DM_ETH
31 select PHYLIB
32 help
33 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
34 Please find details on the "Triple-Speed Ethernet MegaCore Function
35 Resource Center" of Altera.
36
Simon Glassc294ac52015-08-19 09:33:41 -060037config E1000
38 bool "Intel PRO/1000 Gigabit Ethernet support"
39 help
40 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
41 adapters. For more information on how to identify your adapter, go
42 to the Adapter & Driver ID Guide at:
43
44 <http://support.intel.com/support/network/adapter/pro100/21397.htm>
45
46config E1000_SPI_GENERIC
47 bool "Allow access to the Intel 8257x SPI bus"
48 depends on E1000
49 help
50 Allow generic access to the SPI bus on the Intel 8257x, for
51 example with the "sspi" command.
52
53config E1000_SPI
54 bool "Enable SPI bus utility code"
55 depends on E1000
56 help
57 Utility code for direct access to the SPI bus on Intel 8257x.
58 This does not do anything useful unless you set at least one
59 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
60
61config CMD_E1000
62 bool "Enable the e1000 command"
63 depends on E1000
64 help
65 This enables the 'e1000' management command for E1000 devices. When
66 used on devices with SPI support you can reprogram the EEPROM from
67 U-Boot.
68
Joe Hershberger3ea143a2015-03-22 17:09:13 -050069config ETH_SANDBOX
70 depends on DM_ETH && SANDBOX
71 default y
72 bool "Sandbox: Mocked Ethernet driver"
73 help
74 This driver simply responds with fake ARP replies and ping
75 replies that are used to verify network stack functionality
76
77 This driver is particularly useful in the test/dm/eth.c tests
78
Joe Hershbergera346ca72015-03-22 17:09:21 -050079config ETH_SANDBOX_RAW
80 depends on DM_ETH && SANDBOX
81 default y
82 bool "Sandbox: Bridge to Linux Raw Sockets"
83 help
84 This driver is a bridge from the bottom of the network stack
85 in U-Boot to the RAW AF_PACKET API in Linux. This allows real
86 network traffic to be tested from within sandbox. See
87 board/sandbox/README.sandbox for more details.
88
Simon Glassef48f6d2015-04-05 16:07:34 -060089config ETH_DESIGNWARE
90 bool "Synopsys Designware Ethernet MAC"
91 help
92 This MAC is present in SoCs from various vendors. It supports
93 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
94 provide the PHY (physical media interface).
95
Bin Mengb68fe152015-08-27 22:25:58 -070096config PCH_GBE
97 bool "Intel Platform Controller Hub EG20T GMAC driver"
98 depends on DM_ETH && DM_PCI
99 select PHYLIB
100 help
101 This MAC is present in Intel Platform Controller Hub EG20T. It
102 supports 10/100/1000 Mbps operation.
103
Michal Simek596e5782015-11-30 14:34:52 +0100104config ZYNQ_GEM
105 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
106 bool "Xilinx Ethernet GEM"
107 help
108 This MAC is presetn in Xilinx Zynq and ZynqMP SoCs.
109
Joe Hershberger3ea143a2015-03-22 17:09:13 -0500110endif # NETDEVICES