| wdenk | 2d1a537 | 2004-02-23 19:30:57 +0000 | [diff] [blame^] | 1 | U-BOOT Port for FSForth ModNET50 Board |
| 2 | -------------------------------------- |
| 3 | |
| 4 | author: Thomas Elste <info@elste.org> |
| 5 | IMMS gGmbH <www.imms.de> |
| 6 | |
| 7 | The port based upon an early (partial complete) |
| 8 | armboot-port from Stephan Linz for the ModNET50 Board. |
| 9 | |
| 10 | |
| 11 | Overview: |
| 12 | |
| 13 | - board with Netsilicon NET+50 ARM7TDMI CPU without MMU |
| 14 | - 16 MB SDRAM |
| 15 | - 2 MB Flash (MBL29LV160BE) |
| 16 | - 10/100 Ethernet PHY (LXT971A) |
| 17 | |
| 18 | |
| 19 | Current Configuration (include/configs/modnet50.h): |
| 20 | |
| 21 | Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM |
| 22 | 0x10000000 - 0x101FFFFF 2M Flash |
| 23 | |
| 24 | The Flash uses a BB-Architectur with 35 sectors |
| 25 | (0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in |
| 26 | the first 5 sectors. |
| 27 | |
| 28 | The environment is located at the end of the 4th Flash |
| 29 | sector (0x1001C000-0x1001FFFF). |
| 30 | |
| 31 | Build: |
| 32 | |
| 33 | U-boot should be build by using the ELDK Toolchain (arm-linux-*). |
| 34 | |
| 35 | make modnet50_config |
| 36 | make |
| 37 | |
| 38 | |
| 39 | Status: |
| 40 | |
| 41 | Everything seems to work fine. Booting images was tested by |
| 42 | booting uCLinux (with and without a separate ramdisk image) from |
| 43 | flash. |
| 44 | |
| 45 | |
| 46 | Files: |
| 47 | |
| 48 | cpu/arm720t/serial_netarm.c .. serial I/O for the cpu |
| 49 | |
| 50 | board/modnet50/memsetup.S .. memory setup for ModNET50 |
| 51 | board/modnet50/flash.c .. flash routines |
| 52 | board/modnet50/modnet50.c .. some board init stuff |
| 53 | |
| 54 | drivers/netarm_eth.c .. ethernet driver for the NET+50 CPU |
| 55 | drivers/netarm_eth.h .. header for ethernet driver |
| 56 | |
| 57 | include/configs/modnet50.h .. configuration file for ModNET50 |
| 58 | |
| 59 | include/netarm_*.h .. register and macro definitions for |
| 60 | the NETARM CPU family |
| 61 | |
| 62 | doc/README.modnet50 .. this readme |