Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / cd8355664db363768b672f9a362044e2db9bd86c / . / arch / arm / dts / omap4.dtsi
blob: 763bdea8c82955989115c6a96da58fbd1c1b82de [file] [log] [blame]
Tero Kristo00fde6b2020-06-16 11:03:05 +0300[diff] [blame]1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
4 */
5
6#include <dt-bindings/bus/ti-sysc.h>
7#include <dt-bindings/clock/omap4.h>
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/interrupt-controller/arm-gic.h>
10#include <dt-bindings/pinctrl/omap.h>
11#include <dt-bindings/clock/omap4.h>
12
13/ {
14 compatible = "ti,omap4430", "ti,omap4";
15 interrupt-parent = <&wakeupgen>;
16 #address-cells = <1>;
17 #size-cells = <1>;
18 chosen { };
19
20 aliases {
21 i2c0 = &i2c1;
22 i2c1 = &i2c2;
23 i2c2 = &i2c3;
24 i2c3 = &i2c4;
25 serial0 = &uart1;
26 serial1 = &uart2;
27 serial2 = &uart3;
28 serial3 = &uart4;
29 };
30
31 cpus {
32 #address-cells = <1>;
33 #size-cells = <0>;
34
35 cpu@0 {
36 compatible = "arm,cortex-a9";
37 device_type = "cpu";
38 next-level-cache = <&L2>;
39 reg = <0x0>;
40
41 clocks = <&dpll_mpu_ck>;
42 clock-names = "cpu";
43
44 clock-latency = <300000>; /* From omap-cpufreq driver */
45 };
46 cpu@1 {
47 compatible = "arm,cortex-a9";
48 device_type = "cpu";
49 next-level-cache = <&L2>;
50 reg = <0x1>;
51 };
52 };
53
54 /*
55 * Note that 4430 needs cross trigger interface (CTI) supported
56 * before we can configure the interrupts. This means sampling
57 * events are not supported for pmu. Note that 4460 does not use
58 * CTI, see also 4460.dtsi.
59 */
60 pmu {
61 compatible = "arm,cortex-a9-pmu";
62 ti,hwmods = "debugss";
63 };
64
65 gic: interrupt-controller@48241000 {
66 compatible = "arm,cortex-a9-gic";
67 interrupt-controller;
68 #interrupt-cells = <3>;
69 reg = <0x48241000 0x1000>,
70 <0x48240100 0x0100>;
71 interrupt-parent = <&gic>;
72 };
73
74 L2: l2-cache-controller@48242000 {
75 compatible = "arm,pl310-cache";
76 reg = <0x48242000 0x1000>;
77 cache-unified;
78 cache-level = <2>;
79 };
80
81 local-timer@48240600 {
82 compatible = "arm,cortex-a9-twd-timer";
83 clocks = <&mpu_periphclk>;
84 reg = <0x48240600 0x20>;
85 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
86 interrupt-parent = <&gic>;
87 };
88
89 wakeupgen: interrupt-controller@48281000 {
90 compatible = "ti,omap4-wugen-mpu";
91 interrupt-controller;
92 #interrupt-cells = <3>;
93 reg = <0x48281000 0x1000>;
94 interrupt-parent = <&gic>;
95 };
96
97 /*
98 * The soc node represents the soc top level view. It is used for IPs
99 * that are not memory mapped in the MPU view or for the MPU itself.
100 */
101 soc {
102 compatible = "ti,omap-infra";
103 mpu {
104 compatible = "ti,omap4-mpu";
105 ti,hwmods = "mpu";
106 sram = <&ocmcram>;
107 };
108
109 dsp {
110 compatible = "ti,omap3-c64";
111 };
112
113 iva {
114 compatible = "ti,ivahd";
115 ti,hwmods = "iva";
116 };
117 };
118
119 /*
120 * XXX: Use a flat representation of the OMAP4 interconnect.
121 * The real OMAP interconnect network is quite complex.
122 * Since it will not bring real advantage to represent that in DT for
123 * the moment, just use a fake OCP bus entry to represent the whole bus
124 * hierarchy.
125 */
126 ocp {
127 compatible = "ti,omap4-l3-noc", "simple-bus";
128 #address-cells = <1>;
129 #size-cells = <1>;
130 ranges;
131 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
132 reg = <0x44000000 0x1000>,
133 <0x44800000 0x2000>,
134 <0x45000000 0x1000>;
135 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
136 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
137
138 l4_wkup: interconnect@4a300000 {
139 };
140
141 l4_cfg: interconnect@4a000000 {
142 };
143
144 l4_per: interconnect@48000000 {
145 };
146
147 l4_abe: interconnect@40100000 {
148 };
149
150 ocmcram: sram@40304000 {
151 compatible = "mmio-sram";
152 reg = <0x40304000 0xa000>; /* 40k */
153 };
154
155 gpmc: gpmc@50000000 {
156 compatible = "ti,omap4430-gpmc";
157 reg = <0x50000000 0x1000>;
158 #address-cells = <2>;
159 #size-cells = <1>;
160 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
161 dmas = <&sdma 4>;
162 dma-names = "rxtx";
163 gpmc,num-cs = <8>;
164 gpmc,num-waitpins = <4>;
165 ti,hwmods = "gpmc";
166 ti,no-idle-on-init;
167 clocks = <&l3_div_ck>;
168 clock-names = "fck";
169 interrupt-controller;
170 #interrupt-cells = <2>;
171 gpio-controller;
172 #gpio-cells = <2>;
173 };
174
175 target-module@52000000 {
176 compatible = "ti,sysc-omap4", "ti,sysc";
177 ti,hwmods = "iss";
178 reg = <0x52000000 0x4>,
179 <0x52000010 0x4>;
180 reg-names = "rev", "sysc";
181 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
182 ti,sysc-midle = <SYSC_IDLE_FORCE>,
183 <SYSC_IDLE_NO>,
184 <SYSC_IDLE_SMART>,
185 <SYSC_IDLE_SMART_WKUP>;
186 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
187 <SYSC_IDLE_NO>,
188 <SYSC_IDLE_SMART>,
189 <SYSC_IDLE_SMART_WKUP>;
190 ti,sysc-delay-us = <2>;
191 clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>;
192 clock-names = "fck";
193 #address-cells = <1>;
194 #size-cells = <1>;
195 ranges = <0 0x52000000 0x1000000>;
196
197 /* No child device binding, driver in staging */
198 };
199
200 target-module@55082000 {
201 compatible = "ti,sysc-omap2", "ti,sysc";
202 reg = <0x55082000 0x4>,
203 <0x55082010 0x4>,
204 <0x55082014 0x4>;
205 reg-names = "rev", "sysc", "syss";
206 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
207 <SYSC_IDLE_NO>,
208 <SYSC_IDLE_SMART>;
209 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
210 SYSC_OMAP2_SOFTRESET |
211 SYSC_OMAP2_AUTOIDLE)>;
212 clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
213 clock-names = "fck";
214 resets = <&prm_core 2>;
215 reset-names = "rstctrl";
216 ranges = <0x0 0x55082000 0x100>;
217 #size-cells = <1>;
218 #address-cells = <1>;
219
220 mmu_ipu: mmu@0 {
221 compatible = "ti,omap4-iommu";
222 reg = <0x0 0x100>;
223 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
224 #iommu-cells = <0>;
225 ti,iommu-bus-err-back;
226 };
227 };
228
229 target-module@4012c000 {
230 compatible = "ti,sysc-omap4", "ti,sysc";
231 reg = <0x4012c000 0x4>,
232 <0x4012c010 0x4>;
233 reg-names = "rev", "sysc";
234 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
235 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
236 <SYSC_IDLE_NO>,
237 <SYSC_IDLE_SMART>,
238 <SYSC_IDLE_SMART_WKUP>;
239 clocks = <&abe_clkctrl OMAP4_SLIMBUS1_CLKCTRL 0>;
240 clock-names = "fck";
241 #address-cells = <1>;
242 #size-cells = <1>;
243 ranges = <0x00000000 0x4012c000 0x1000>, /* MPU */
244 <0x4902c000 0x4902c000 0x1000>; /* L3 */
245
246 /* No child device binding or driver in mainline */
247 };
248
249 dmm@4e000000 {
250 compatible = "ti,omap4-dmm";
251 reg = <0x4e000000 0x800>;
252 interrupts = <0 113 0x4>;
253 ti,hwmods = "dmm";
254 };
255
256 emif1: emif@4c000000 {
257 compatible = "ti,emif-4d";
258 reg = <0x4c000000 0x100>;
259 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
260 ti,hwmods = "emif1";
261 ti,no-idle-on-init;
262 phy-type = <1>;
263 hw-caps-read-idle-ctrl;
264 hw-caps-ll-interface;
265 hw-caps-temp-alert;
266 };
267
268 emif2: emif@4d000000 {
269 compatible = "ti,emif-4d";
270 reg = <0x4d000000 0x100>;
271 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
272 ti,hwmods = "emif2";
273 ti,no-idle-on-init;
274 phy-type = <1>;
275 hw-caps-read-idle-ctrl;
276 hw-caps-ll-interface;
277 hw-caps-temp-alert;
278 };
279
280 aes1_target: target-module@4b501000 {
281 compatible = "ti,sysc-omap2", "ti,sysc";
282 reg = <0x4b501080 0x4>,
283 <0x4b501084 0x4>,
284 <0x4b501088 0x4>;
285 reg-names = "rev", "sysc", "syss";
286 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
287 SYSC_OMAP2_AUTOIDLE)>;
288 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
289 <SYSC_IDLE_NO>,
290 <SYSC_IDLE_SMART>,
291 <SYSC_IDLE_SMART_WKUP>;
292 ti,syss-mask = <1>;
293 /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
294 clocks = <&l4_secure_clkctrl OMAP4_AES1_CLKCTRL 0>;
295 clock-names = "fck";
296 #address-cells = <1>;
297 #size-cells = <1>;
298 ranges = <0x0 0x4b501000 0x1000>;
299
300 aes1: aes@0 {
301 compatible = "ti,omap4-aes";
302 reg = <0 0xa0>;
303 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
304 dmas = <&sdma 111>, <&sdma 110>;
305 dma-names = "tx", "rx";
306 };
307 };
308
309 aes2_target: target-module@4b701000 {
310 compatible = "ti,sysc-omap2", "ti,sysc";
311 reg = <0x4b701080 0x4>,
312 <0x4b701084 0x4>,
313 <0x4b701088 0x4>;
314 reg-names = "rev", "sysc", "syss";
315 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
316 SYSC_OMAP2_AUTOIDLE)>;
317 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
318 <SYSC_IDLE_NO>,
319 <SYSC_IDLE_SMART>,
320 <SYSC_IDLE_SMART_WKUP>;
321 ti,syss-mask = <1>;
322 /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
323 clocks = <&l4_secure_clkctrl OMAP4_AES2_CLKCTRL 0>;
324 clock-names = "fck";
325 #address-cells = <1>;
326 #size-cells = <1>;
327 ranges = <0x0 0x4b701000 0x1000>;
328
329 aes2: aes@0 {
330 compatible = "ti,omap4-aes";
331 reg = <0 0xa0>;
332 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
333 dmas = <&sdma 114>, <&sdma 113>;
334 dma-names = "tx", "rx";
335 };
336 };
337
338 sham_target: target-module@4b100000 {
339 compatible = "ti,sysc-omap3-sham", "ti,sysc";
340 reg = <0x4b100100 0x4>,
341 <0x4b100110 0x4>,
342 <0x4b100114 0x4>;
343 reg-names = "rev", "sysc", "syss";
344 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
345 SYSC_OMAP2_AUTOIDLE)>;
346 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
347 <SYSC_IDLE_NO>,
348 <SYSC_IDLE_SMART>;
349 ti,syss-mask = <1>;
350 /* Domains (P, C): l4per_pwrdm, l4_secure_clkdm */
351 clocks = <&l4_secure_clkctrl OMAP4_SHA2MD5_CLKCTRL 0>;
352 clock-names = "fck";
353 #address-cells = <1>;
354 #size-cells = <1>;
355 ranges = <0x0 0x4b100000 0x1000>;
356
357 sham: sham@0 {
358 compatible = "ti,omap4-sham";
359 reg = <0 0x300>;
360 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
361 dmas = <&sdma 119>;
362 dma-names = "rx";
363 };
364 };
365
366 abb_mpu: regulator-abb-mpu {
367 compatible = "ti,abb-v2";
368 regulator-name = "abb_mpu";
369 #address-cells = <0>;
370 #size-cells = <0>;
371 ti,tranxdone-status-mask = <0x80>;
372 clocks = <&sys_clkin_ck>;
373 ti,settling-time = <50>;
374 ti,clock-cycles = <16>;
375
376 status = "disabled";
377 };
378
379 abb_iva: regulator-abb-iva {
380 compatible = "ti,abb-v2";
381 regulator-name = "abb_iva";
382 #address-cells = <0>;
383 #size-cells = <0>;
384 ti,tranxdone-status-mask = <0x80000000>;
385 clocks = <&sys_clkin_ck>;
386 ti,settling-time = <50>;
387 ti,clock-cycles = <16>;
388
389 status = "disabled";
390 };
391
392 target-module@56000000 {
393 compatible = "ti,sysc-omap4", "ti,sysc";
394 reg = <0x5600fe00 0x4>,
395 <0x5600fe10 0x4>;
396 reg-names = "rev", "sysc";
397 ti,sysc-midle = <SYSC_IDLE_FORCE>,
398 <SYSC_IDLE_NO>,
399 <SYSC_IDLE_SMART>,
400 <SYSC_IDLE_SMART_WKUP>;
401 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
402 <SYSC_IDLE_NO>,
403 <SYSC_IDLE_SMART>,
404 <SYSC_IDLE_SMART_WKUP>;
405 clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>;
406 clock-names = "fck";
407 #address-cells = <1>;
408 #size-cells = <1>;
409 ranges = <0 0x56000000 0x2000000>;
410
411 /*
412 * Closed source PowerVR driver, no child device
413 * binding or driver in mainline
414 */
415 };
416
417 /*
418 * DSS is only using l3 mapping without l4 as noted in the TRM
419 * "10.1.3 DSS Register Manual" for omap4460.
420 */
421 target-module@58000000 {
422 compatible = "ti,sysc-omap2", "ti,sysc";
423 reg = <0x58000000 4>,
424 <0x58000014 4>;
425 reg-names = "rev", "syss";
426 ti,syss-mask = <1>;
427 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 0>,
428 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
429 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>,
430 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
431 clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
432 #address-cells = <1>;
433 #size-cells = <1>;
434 ranges = <0 0x58000000 0x1000000>;
435
436 dss: dss@0 {
437 compatible = "ti,omap4-dss";
438 reg = <0 0x80>;
439 status = "disabled";
440 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
441 clock-names = "fck";
442 #address-cells = <1>;
443 #size-cells = <1>;
444 ranges = <0 0 0x1000000>;
445
446 target-module@1000 {
447 compatible = "ti,sysc-omap2", "ti,sysc";
448 reg = <0x1000 0x4>,
449 <0x1010 0x4>,
450 <0x1014 0x4>;
451 reg-names = "rev", "sysc", "syss";
452 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
453 <SYSC_IDLE_NO>,
454 <SYSC_IDLE_SMART>;
455 ti,sysc-midle = <SYSC_IDLE_FORCE>,
456 <SYSC_IDLE_NO>,
457 <SYSC_IDLE_SMART>;
458 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
459 SYSC_OMAP2_ENAWAKEUP |
460 SYSC_OMAP2_SOFTRESET |
461 SYSC_OMAP2_AUTOIDLE)>;
462 ti,syss-mask = <1>;
463 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
464 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
465 clock-names = "fck", "sys_clk";
466 #address-cells = <1>;
467 #size-cells = <1>;
468 ranges = <0 0x1000 0x1000>;
469
470 dispc@0 {
471 compatible = "ti,omap4-dispc";
472 reg = <0 0x1000>;
473 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
474 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
475 clock-names = "fck";
476 };
477 };
478
479 target-module@2000 {
480 compatible = "ti,sysc-omap2", "ti,sysc";
481 reg = <0x2000 0x4>,
482 <0x2010 0x4>,
483 <0x2014 0x4>;
484 reg-names = "rev", "sysc", "syss";
485 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
486 <SYSC_IDLE_NO>,
487 <SYSC_IDLE_SMART>;
488 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
489 SYSC_OMAP2_AUTOIDLE)>;
490 ti,syss-mask = <1>;
491 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
492 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
493 clock-names = "fck", "sys_clk";
494 #address-cells = <1>;
495 #size-cells = <1>;
496 ranges = <0 0x2000 0x1000>;
497
498 rfbi: encoder@0 {
499 reg = <0 0x1000>;
500 status = "disabled";
501 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_div_ck>;
502 clock-names = "fck", "ick";
503 };
504 };
505
506 target-module@3000 {
507 compatible = "ti,sysc-omap2", "ti,sysc";
508 reg = <0x3000 0x4>;
509 reg-names = "rev";
510 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
511 clock-names = "sys_clk";
512 #address-cells = <1>;
513 #size-cells = <1>;
514 ranges = <0 0x3000 0x1000>;
515
516 venc: encoder@0 {
517 compatible = "ti,omap4-venc";
518 reg = <0 0x1000>;
519 status = "disabled";
520 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 11>;
521 clock-names = "fck";
522 };
523 };
524
525 target-module@4000 {
526 compatible = "ti,sysc-omap2", "ti,sysc";
527 reg = <0x4000 0x4>,
528 <0x4010 0x4>,
529 <0x4014 0x4>;
530 reg-names = "rev", "sysc", "syss";
531 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
532 <SYSC_IDLE_NO>,
533 <SYSC_IDLE_SMART>;
534 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
535 SYSC_OMAP2_ENAWAKEUP |
536 SYSC_OMAP2_SOFTRESET |
537 SYSC_OMAP2_AUTOIDLE)>;
538 ti,syss-mask = <1>;
539 #address-cells = <1>;
540 #size-cells = <1>;
541 ranges = <0 0x4000 0x1000>;
542
543 dsi1: encoder@0 {
544 compatible = "ti,omap4-dsi";
545 reg = <0 0x200>,
546 <0x200 0x40>,
547 <0x300 0x20>;
548 reg-names = "proto", "phy", "pll";
549 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
550 status = "disabled";
551 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
552 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
553 clock-names = "fck", "sys_clk";
554 };
555 };
556
557 target-module@5000 {
558 compatible = "ti,sysc-omap2", "ti,sysc";
559 reg = <0x5000 0x4>,
560 <0x5010 0x4>,
561 <0x5014 0x4>;
562 reg-names = "rev", "sysc", "syss";
563 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
564 <SYSC_IDLE_NO>,
565 <SYSC_IDLE_SMART>;
566 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
567 SYSC_OMAP2_ENAWAKEUP |
568 SYSC_OMAP2_SOFTRESET |
569 SYSC_OMAP2_AUTOIDLE)>;
570 ti,syss-mask = <1>;
571 #address-cells = <1>;
572 #size-cells = <1>;
573 ranges = <0 0x5000 0x1000>;
574
575 dsi2: encoder@0 {
576 compatible = "ti,omap4-dsi";
577 reg = <0 0x200>,
578 <0x200 0x40>,
579 <0x300 0x20>;
580 reg-names = "proto", "phy", "pll";
581 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
582 status = "disabled";
583 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>,
584 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
585 clock-names = "fck", "sys_clk";
586 };
587 };
588
589 target-module@6000 {
590 compatible = "ti,sysc-omap4", "ti,sysc";
591 reg = <0x6000 0x4>,
592 <0x6010 0x4>;
593 reg-names = "rev", "sysc";
594 /*
595 * Has SYSC_IDLE_SMART and SYSC_IDLE_SMART_WKUP
596 * but HDMI audio will fail with them.
597 */
598 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
599 <SYSC_IDLE_NO>;
600 ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
601 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
602 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>;
603 clock-names = "fck", "dss_clk";
604 #address-cells = <1>;
605 #size-cells = <1>;
606 ranges = <0 0x6000 0x2000>;
607
608 hdmi: encoder@0 {
609 compatible = "ti,omap4-hdmi";
610 reg = <0 0x200>,
611 <0x200 0x100>,
612 <0x300 0x100>,
613 <0x400 0x1000>;
614 reg-names = "wp", "pll", "phy", "core";
615 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
616 status = "disabled";
617 clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 9>,
618 <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>;
619 clock-names = "fck", "sys_clk";
620 dmas = <&sdma 76>;
621 dma-names = "audio_tx";
622 };
623 };
624 };
625 };
626 };
627};
628
629#include "omap4-l4.dtsi"
630#include "omap4-l4-abe.dtsi"
631#include "omap44xx-clocks.dtsi"
632
633&prm {
634 prm_tesla: prm@400 {
635 compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
636 reg = <0x400 0x100>;
637 #reset-cells = <1>;
638 };
639
640 prm_core: prm@700 {
641 compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
642 reg = <0x700 0x100>;
643 #reset-cells = <1>;
644 };
645
646 prm_ivahd: prm@f00 {
647 compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
648 reg = <0xf00 0x100>;
649 #reset-cells = <1>;
650 };
651
652 prm_device: prm@1b00 {
653 compatible = "ti,omap4-prm-inst", "ti,omap-prm-inst";
654 reg = <0x1b00 0x40>;
655 #reset-cells = <1>;
656 };
657};