ETIENNE DUBLE | 89c4fec | 2023-01-25 10:57:28 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0+ |
| 2 | /* |
| 3 | * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk> |
| 4 | * Copyright (C) 2023 Etienne Dublé (CNRS) <etienne.duble@imag.fr> |
| 5 | * |
| 6 | * This code is mostly derived from the linux driver. |
| 7 | */ |
| 8 | |
| 9 | #include <dm.h> |
| 10 | #include <wdt.h> |
| 11 | #include <asm/io.h> |
| 12 | #include <linux/delay.h> |
| 13 | |
| 14 | #define PM_RSTC 0x1c |
| 15 | #define PM_WDOG 0x24 |
| 16 | |
| 17 | #define PM_PASSWORD 0x5a000000 |
| 18 | |
| 19 | /* The hardware supports a maximum timeout value of 0xfffff ticks |
| 20 | * (just below 16 seconds). |
| 21 | */ |
| 22 | #define PM_WDOG_MAX_TICKS 0x000fffff |
| 23 | #define PM_RSTC_WRCFG_CLR 0xffffffcf |
| 24 | #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 |
| 25 | #define PM_RSTC_RESET 0x00000102 |
| 26 | |
| 27 | #define MS_TO_WDOG_TICKS(x) (((x) << 16) / 1000) |
| 28 | |
| 29 | struct bcm2835_wdt_priv { |
| 30 | void __iomem *base; |
| 31 | u64 timeout_ticks; |
| 32 | }; |
| 33 | |
| 34 | static int bcm2835_wdt_start_ticks(struct udevice *dev, |
| 35 | u64 timeout_ticks, ulong flags) |
| 36 | { |
| 37 | struct bcm2835_wdt_priv *priv = dev_get_priv(dev); |
| 38 | void __iomem *base = priv->base; |
| 39 | u32 cur; |
| 40 | |
| 41 | writel(PM_PASSWORD | timeout_ticks, base + PM_WDOG); |
| 42 | cur = readl(base + PM_RSTC); |
| 43 | writel(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) | PM_RSTC_WRCFG_FULL_RESET, |
| 44 | base + PM_RSTC); |
| 45 | |
| 46 | return 0; |
| 47 | } |
| 48 | |
| 49 | static int bcm2835_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) |
| 50 | { |
| 51 | struct bcm2835_wdt_priv *priv = dev_get_priv(dev); |
| 52 | |
| 53 | priv->timeout_ticks = MS_TO_WDOG_TICKS(timeout_ms); |
| 54 | |
| 55 | if (priv->timeout_ticks > PM_WDOG_MAX_TICKS) { |
| 56 | printf("bcm2835_wdt: the timeout value is too high, using ~16s instead.\n"); |
| 57 | priv->timeout_ticks = PM_WDOG_MAX_TICKS; |
| 58 | } |
| 59 | |
| 60 | return bcm2835_wdt_start_ticks(dev, priv->timeout_ticks, flags); |
| 61 | } |
| 62 | |
| 63 | static int bcm2835_wdt_reset(struct udevice *dev) |
| 64 | { |
| 65 | struct bcm2835_wdt_priv *priv = dev_get_priv(dev); |
| 66 | |
| 67 | /* restart the timer with the value of priv->timeout_ticks |
| 68 | * saved from the last bcm2835_wdt_start() call. |
| 69 | */ |
| 70 | return bcm2835_wdt_start_ticks(dev, priv->timeout_ticks, 0); |
| 71 | } |
| 72 | |
| 73 | static int bcm2835_wdt_stop(struct udevice *dev) |
| 74 | { |
| 75 | struct bcm2835_wdt_priv *priv = dev_get_priv(dev); |
| 76 | void __iomem *base = priv->base; |
| 77 | |
| 78 | writel(PM_PASSWORD | PM_RSTC_RESET, base + PM_RSTC); |
| 79 | |
| 80 | return 0; |
| 81 | } |
| 82 | |
| 83 | static int bcm2835_wdt_expire_now(struct udevice *dev, ulong flags) |
| 84 | { |
| 85 | int ret; |
| 86 | |
| 87 | /* use a timeout of 10 ticks (~150us) */ |
| 88 | ret = bcm2835_wdt_start_ticks(dev, 10, flags); |
| 89 | if (ret) |
| 90 | return ret; |
| 91 | |
| 92 | mdelay(500); |
| 93 | |
| 94 | return 0; |
| 95 | } |
| 96 | |
| 97 | static const struct wdt_ops bcm2835_wdt_ops = { |
| 98 | .reset = bcm2835_wdt_reset, |
| 99 | .start = bcm2835_wdt_start, |
| 100 | .stop = bcm2835_wdt_stop, |
| 101 | .expire_now = bcm2835_wdt_expire_now, |
| 102 | }; |
| 103 | |
| 104 | static const struct udevice_id bcm2835_wdt_ids[] = { |
| 105 | { .compatible = "brcm,bcm2835-pm" }, |
| 106 | { .compatible = "brcm,bcm2835-pm-wdt" }, |
| 107 | { /* sentinel */ } |
| 108 | }; |
| 109 | |
| 110 | static int bcm2835_wdt_probe(struct udevice *dev) |
| 111 | { |
| 112 | struct bcm2835_wdt_priv *priv = dev_get_priv(dev); |
| 113 | |
| 114 | priv->base = dev_remap_addr(dev); |
| 115 | if (!priv->base) |
| 116 | return -EINVAL; |
| 117 | |
| 118 | priv->timeout_ticks = PM_WDOG_MAX_TICKS; |
| 119 | |
| 120 | bcm2835_wdt_stop(dev); |
| 121 | |
| 122 | return 0; |
| 123 | } |
| 124 | |
| 125 | U_BOOT_DRIVER(bcm2835_wdt) = { |
| 126 | .name = "bcm2835_wdt", |
| 127 | .id = UCLASS_WDT, |
| 128 | .of_match = bcm2835_wdt_ids, |
| 129 | .probe = bcm2835_wdt_probe, |
| 130 | .priv_auto = sizeof(struct bcm2835_wdt_priv), |
| 131 | .ops = &bcm2835_wdt_ops, |
| 132 | }; |