blob: 2df671730842a856dadd809a52a046502bcc91e6 [file] [log] [blame]
Mike Frysingerd9a5d112008-10-12 20:59:12 -04001/*
2 * video.c - run splash screen on lcd
3 *
4 * Copyright (c) 2007-2008 Analog Devices Inc.
5 *
6 * Licensed under the GPL-2 or later.
7 */
8
9#include <stdarg.h>
10#include <common.h>
11#include <config.h>
12#include <malloc.h>
13#include <asm/blackfin.h>
14#include <asm/mach-common/bits/dma.h>
15#include <i2c.h>
16#include <linux/types.h>
17#include <devices.h>
18
19int gunzip(void *, int, unsigned char *, unsigned long *);
20
21#define DMA_SIZE16 2
22
23#include <asm/mach-common/bits/ppi.h>
24#include <asm/mach-common/bits/timer.h>
25
26#include <asm/bfin_logo_230x230.h>
27
28#define LCD_X_RES 320 /* Horizontal Resolution */
29#define LCD_Y_RES 240 /* Vertical Resolution */
30#define LCD_BPP 24 /* Bit Per Pixel */
31#define LCD_PIXEL_SIZE (LCD_BPP / 8)
32
33#define DMA_BUS_SIZE 16
34#define LCD_CLK (12*1000*1000) /* 12MHz */
35
36#define CLOCKS_PER_PIX 3
37
38/* HS and VS timing parameters (all in number of PPI clk ticks) */
39#define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */
40#define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */
41#define H_PULSE 90 /* HS pulse width */
42#define H_START 204 /* first valid pixel */
43
44#define U_LINE 1 /* Blanking Lines */
45
46#define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */
47#define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */
48#define V_PERIOD (H_PERIOD * V_LINES) /* VS period */
49
50#define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX)
51
52#define PPI_TX_MODE 0x2
53#define PPI_XFER_TYPE_11 0xC
54#define PPI_PORT_CFG_01 0x10
55#define PPI_PACK_EN 0x80
56#define PPI_POLS_1 0x8000
57
58/* enable and disable PPI functions */
59void EnablePPI(void)
60{
61 *pPPI_CONTROL |= PORT_EN;
62}
63
64void DisablePPI(void)
65{
66 *pPPI_CONTROL &= ~PORT_EN;
67}
68
69void Init_Ports(void)
70{
71 *pPORTF_MUX &= ~PORT_x_MUX_0_MASK;
72 *pPORTF_MUX |= PORT_x_MUX_0_FUNC_1;
73 *pPORTF_FER |= PF0 | PF1 | PF2 | PF3 | PF4 | PF5 | PF6 | PF7;
74
75 *pPORTG_MUX &= ~PORT_x_MUX_1_MASK;
76 *pPORTG_MUX |= PORT_x_MUX_1_FUNC_1;
77 *pPORTG_FER |= PG5;
78}
79
80void Init_PPI(void)
81{
82
83 *pPPI_DELAY = H_START;
84 *pPPI_COUNT = (H_ACTPIX-1);
85 *pPPI_FRAME = 0;
86
87 /* PPI control, to be replaced with definitions */
88 *pPPI_CONTROL = PPI_TX_MODE | /* output mode , PORT_DIR */
89 PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */
90 PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */
91 PPI_PACK_EN | /* packing enabled PACK_EN */
92 PPI_POLS_1; /* faling edge syncs POLS */
93}
94
95void Init_DMA(void *dst)
96{
97 *pDMA0_START_ADDR = dst;
98
99 /* X count */
100 *pDMA0_X_COUNT = H_ACTPIX / 2;
101 *pDMA0_X_MODIFY = DMA_BUS_SIZE / 8;
102
103 /* Y count */
104 *pDMA0_Y_COUNT = V_LINES;
105 *pDMA0_Y_MODIFY = DMA_BUS_SIZE / 8;
106
107 /* DMA Config */
108 *pDMA0_CONFIG =
109 WDSIZE_16 | /* 16 bit DMA */
110 DMA2D | /* 2D DMA */
111 FLOW_AUTO; /* autobuffer mode */
112}
113
114
115void EnableDMA(void)
116{
117 *pDMA0_CONFIG |= DMAEN;
118}
119
120void DisableDMA(void)
121{
122 *pDMA0_CONFIG &= ~DMAEN;
123}
124
125
126/* Init TIMER0 as Frame Sync 1 generator */
127void InitTIMER0(void)
128{
129 *pTIMER_DISABLE |= TIMDIS0; /* disable Timer */
130 SSYNC();
131 *pTIMER_STATUS |= TIMIL0 | TOVF_ERR0 | TRUN0; /* clear status */
132 SSYNC();
133
134 *pTIMER0_PERIOD = H_PERIOD;
135 SSYNC();
136 *pTIMER0_WIDTH = H_PULSE;
137 SSYNC();
138
139 *pTIMER0_CONFIG = PWM_OUT |
140 PERIOD_CNT |
141 TIN_SEL |
142 CLK_SEL |
143 EMU_RUN;
144 SSYNC();
145}
146
147void EnableTIMER0(void)
148{
149 *pTIMER_ENABLE |= TIMEN0;
150 SSYNC();
151}
152
153void DisableTIMER0(void)
154{
155 *pTIMER_DISABLE |= TIMDIS0;
156 SSYNC();
157}
158
159
160void InitTIMER1(void)
161{
162 *pTIMER_DISABLE |= TIMDIS1; /* disable Timer */
163 SSYNC();
164 *pTIMER_STATUS |= TIMIL1 | TOVF_ERR1 | TRUN1; /* clear status */
165 SSYNC();
166
167
168 *pTIMER1_PERIOD = V_PERIOD;
169 SSYNC();
170 *pTIMER1_WIDTH = V_PULSE;
171 SSYNC();
172
173 *pTIMER1_CONFIG = PWM_OUT |
174 PERIOD_CNT |
175 TIN_SEL |
176 CLK_SEL |
177 EMU_RUN;
178 SSYNC();
179}
180
181void EnableTIMER1(void)
182{
183 *pTIMER_ENABLE |= TIMEN1;
184 SSYNC();
185}
186
187void DisableTIMER1(void)
188{
189 *pTIMER_DISABLE |= TIMDIS1;
190 SSYNC();
191}
192
193int video_init(void *dst)
194{
195
196 Init_Ports();
197 Init_DMA(dst);
198 EnableDMA();
199 InitTIMER0();
200 InitTIMER1();
201 Init_PPI();
202 EnablePPI();
203
204 /* Frame sync 2 (VS) needs to start at least one PPI clk earlier */
205 EnableTIMER1();
206 /* Add Some Delay ... */
207 SSYNC();
208 SSYNC();
209 SSYNC();
210 SSYNC();
211
212 /* now start frame sync 1 */
213 EnableTIMER0();
214
215 return 0;
216}
217
218static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
219{
220 if (dcache_status())
221 blackfin_dcache_flush_range(logo->data, logo->data + logo->size);
222
223 bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
224
225 /* Setup destination start address */
226 bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
227 + (y * LCD_X_RES * LCD_PIXEL_SIZE));
228 /* Setup destination xcount */
229 bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
230 /* Setup destination xmodify */
231 bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
232
233 /* Setup destination ycount */
234 bfin_write_MDMA_D0_Y_COUNT(logo->height);
235 /* Setup destination ymodify */
236 bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE + DMA_SIZE16);
237
238
239 /* Setup Source start address */
240 bfin_write_MDMA_S0_START_ADDR(logo->data);
241 /* Setup Source xcount */
242 bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
243 /* Setup Source xmodify */
244 bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
245
246 /* Setup Source ycount */
247 bfin_write_MDMA_S0_Y_COUNT(logo->height);
248 /* Setup Source ymodify */
249 bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
250
251
252 /* Enable source DMA */
253 bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
254 SSYNC();
255 bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
256
257 while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN);
258
259 bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
260 bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE | DMA_ERR);
261
262}
263
264void video_putc(const char c)
265{
266}
267
268void video_puts(const char *s)
269{
270}
271
272int drv_video_init(void)
273{
274 int error, devices = 1;
275 device_t videodev;
276
277 u8 *dst;
278 u32 fbmem_size = LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
279
280 dst = malloc(fbmem_size);
281
282 if (dst == NULL) {
283 printf("Failed to alloc FB memory\n");
284 return -1;
285 }
286
287#ifdef EASYLOGO_ENABLE_GZIP
288 unsigned char *data = EASYLOGO_DECOMP_BUFFER;
289 unsigned long src_len = EASYLOGO_ENABLE_GZIP;
290 if (gunzip(data, bfin_logo.size, bfin_logo.data, &src_len)) {
291 puts("Failed to decompress logo\n");
292 free(dst);
293 return -1;
294 }
295 bfin_logo.data = data;
296#endif
297
298 memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0], fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
299
300 dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
301 (LCD_X_RES - bfin_logo.width) / 2,
302 (LCD_Y_RES - bfin_logo.height) / 2);
303
304 video_init(dst); /* Video initialization */
305
306 memset(&videodev, 0, sizeof(videodev));
307
308 strcpy(videodev.name, "video");
309 videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
310 videodev.flags = DEV_FLAGS_SYSTEM; /* No Output */
311 videodev.putc = video_putc; /* 'putc' function */
312 videodev.puts = video_puts; /* 'puts' function */
313
314 error = device_register(&videodev);
315
316 return (error == 0) ? devices : error;
317}