Tom Rini | 83d290c | 2018-05-06 17:58:06 -0400 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
Thomas Abraham | 16ca80a | 2016-04-23 22:18:08 +0530 | [diff] [blame] | 2 | /* |
| 3 | * Exynos pinctrl driver header. |
| 4 | * Copyright (C) 2016 Samsung Electronics |
| 5 | * Thomas Abraham <thomas.ab@samsung.com> |
Thomas Abraham | 16ca80a | 2016-04-23 22:18:08 +0530 | [diff] [blame] | 6 | */ |
| 7 | |
| 8 | #ifndef __PINCTRL_EXYNOS_H_ |
Andre Przywara | 081b160 | 2023-05-15 14:52:13 +0100 | [diff] [blame] | 9 | #define __PINCTRL_EXYNOS_H_ |
Thomas Abraham | 16ca80a | 2016-04-23 22:18:08 +0530 | [diff] [blame] | 10 | |
| 11 | #define PIN_CON 0x00 /* Offset of pin function register */ |
| 12 | #define PIN_DAT 0x04 /* Offset of pin data register */ |
| 13 | #define PIN_PUD 0x08 /* Offset of pin pull up/down config register */ |
| 14 | #define PIN_DRV 0x0C /* Offset of pin drive strength register */ |
| 15 | |
| 16 | /** |
| 17 | * struct samsung_pin_bank_data: represent a controller pin-bank data. |
| 18 | * @offset: starting offset of the pin-bank registers. |
| 19 | * @nr_pins: number of pins included in this bank. |
| 20 | * @name: name to be prefixed for each pin in this pin bank. |
| 21 | */ |
| 22 | struct samsung_pin_bank_data { |
| 23 | u32 offset; |
| 24 | u8 nr_pins; |
| 25 | const char *name; |
| 26 | }; |
| 27 | |
| 28 | #define EXYNOS_PIN_BANK(pins, reg, id) \ |
| 29 | { \ |
| 30 | .offset = reg, \ |
| 31 | .nr_pins = pins, \ |
| 32 | .name = id \ |
| 33 | } |
| 34 | |
| 35 | /** |
| 36 | * struct samsung_pin_ctrl: represent a pin controller. |
| 37 | * @pin_banks: list of pin banks included in this controller. |
| 38 | * @nr_banks: number of pin banks. |
| 39 | */ |
| 40 | struct samsung_pin_ctrl { |
| 41 | const struct samsung_pin_bank_data *pin_banks; |
| 42 | u32 nr_banks; |
| 43 | }; |
| 44 | |
| 45 | /** |
| 46 | * struct exynos_pinctrl_priv: exynos pin controller driver private data |
| 47 | * @pin_ctrl: pin controller bank information. |
| 48 | * @base: base address of the pin controller instance. |
| 49 | * @num_banks: number of pin banks included in the pin controller. |
| 50 | */ |
| 51 | struct exynos_pinctrl_priv { |
| 52 | const struct samsung_pin_ctrl *pin_ctrl; |
| 53 | unsigned long base; |
| 54 | int num_banks; |
| 55 | }; |
| 56 | |
| 57 | /** |
| 58 | * struct exynos_pinctrl_config_data: configuration for a peripheral. |
| 59 | * @offset: offset of the config registers in the controller. |
| 60 | * @mask: value of the register to be masked with. |
| 61 | * @value: new value to be programmed. |
| 62 | */ |
| 63 | struct exynos_pinctrl_config_data { |
| 64 | const unsigned int offset; |
| 65 | const unsigned int mask; |
| 66 | const unsigned int value; |
| 67 | }; |
| 68 | |
| 69 | |
| 70 | void exynos_pinctrl_setup_peri(struct exynos_pinctrl_config_data *conf, |
| 71 | unsigned int num_conf, unsigned long base); |
| 72 | int exynos_pinctrl_set_state(struct udevice *dev, |
| 73 | struct udevice *config); |
| 74 | int exynos_pinctrl_probe(struct udevice *dev); |
| 75 | |
| 76 | #endif /* __PINCTRL_EXYNOS_H_ */ |