blob: fb85c7263b19103d405ace79b92bb9e0b4940977 [file] [log] [blame]
Scott Brandenda1f5ac2014-08-11 13:58:25 -07001/*
2 * Copyright 2014 Broadcom Corporation.
3 *
4 * SPDX-License-Identifier: GPL-2.0+
5 */
6
7#ifndef __BCM_EP_BOARD_H
8#define __BCM_EP_BOARD_H
9
10#include <asm/arch/configs.h>
11
Scott Brandenda1f5ac2014-08-11 13:58:25 -070012#define CONFIG_SKIP_LOWLEVEL_INIT
13
14#define CONFIG_SYS_GENERIC_BOARD
15
16/*
17 * Memory configuration
18 * (these must be defined elsewhere)
19 */
20#ifndef CONFIG_SYS_TEXT_BASE
21#error CONFIG_SYS_TEXT_BASE must be defined!
22#endif
23#ifndef CONFIG_SYS_SDRAM_BASE
24#error CONFIG_SYS_SDRAM_BASE must be defined!
25#endif
26#ifndef CONFIG_SYS_SDRAM_SIZE
27#error CONFIG_SYS_SDRAM_SIZE must be defined!
28#endif
29
30#define CONFIG_NR_DRAM_BANKS 1
31
32#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
33#define CONFIG_STACKSIZE (256 * 1024)
34
35/* Some commands use this as the default load address */
36#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
37
38/* No mtest functions as recommended */
39#undef CONFIG_CMD_MEMORY
40
41/*
42 * This is the initial SP which is used only briefly for relocating the u-boot
43 * image to the top of SDRAM. After relocation u-boot moves the stack to the
44 * proper place.
45 */
46#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
47
48/* allow to overwrite serial and ethaddr */
49#define CONFIG_ENV_OVERWRITE
50
51/* Serial Info */
52#define CONFIG_SYS_NS16550
53#define CONFIG_SYS_NS16550_SERIAL
54
55#define CONFIG_BAUDRATE 115200
56
57#define CONFIG_ENV_SIZE 0x2000
58#define CONFIG_ENV_IS_NOWHERE
59
60#define CONFIG_SYS_NO_FLASH /* Not using NAND/NOR unmanaged flash */
61
62/* console configuration */
63#define CONFIG_SYS_CBSIZE 1024 /* Console buffer size */
64#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
65 sizeof(CONFIG_SYS_PROMPT) + 16) /* Printbuffer size */
66#define CONFIG_SYS_MAXARGS 64
67#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
68
69/*
70 * One partition type must be defined for part.c
71 * This is necessary for the fatls command to work on an SD card
72 * for example.
73 */
74#define CONFIG_DOS_PARTITION
75
76/* version string, parser, etc */
77#define CONFIG_VERSION_VARIABLE
78#define CONFIG_AUTO_COMPLETE
79#define CONFIG_SYS_HUSH_PARSER
80#define CONFIG_CMDLINE_EDITING
81#define CONFIG_COMMAND_HISTORY
82#define CONFIG_SYS_LONGHELP
83
84#define CONFIG_CRC32_VERIFY
85#define CONFIG_MX_CYCLIC
86
87/* Commands */
88#include <config_cmd_default.h>
89
90#define CONFIG_CMD_ASKENV
91#define CONFIG_CMD_CACHE
92#define CONFIG_CMD_FAT
93#define CONFIG_FAT_WRITE
94
95/* Enable devicetree support */
96#define CONFIG_OF_LIBFDT
97
98/* SHA hashing */
99#define CONFIG_CMD_HASH
100#define CONFIG_HASH_VERIFY
101#define CONFIG_SHA1
102#define CONFIG_SHA256
103
104/* Enable Time Command */
105#define CONFIG_CMD_TIME
106
107#define CONFIG_CMD_BOOTZ
108
109/* Misc utility code */
110#define CONFIG_BOUNCE_BUFFER
111#define CONFIG_CRC32_VERIFY
112
113#endif /* __BCM_EP_BOARD_H */