blob: 77822e792f8c1e44c9348ef15b140b99e788880e [file] [log] [blame]
Mike Frysinger5c45f7c2008-10-12 21:25:33 -04001/*
2 * U-boot - Configuration file for BF538F EZ-Kit Lite board
3 */
4
5#ifndef __CONFIG_BF538F_EZKIT_H__
6#define __CONFIG_BF538F_EZKIT_H__
7
Mike Frysingerf348ab82009-04-24 17:22:40 -04008#include <asm/config-pre.h>
Mike Frysinger5c45f7c2008-10-12 21:25:33 -04009
10
11/*
12 * Processor Settings
13 */
Mike Frysingerfbcf8e82010-12-23 14:58:37 -050014#define CONFIG_BFIN_CPU bf538-0.4
Mike Frysinger5c45f7c2008-10-12 21:25:33 -040015#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS
16
17
18/*
19 * Clock Settings
20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
22 */
23/* CONFIG_CLKIN_HZ is any value in Hz */
24#define CONFIG_CLKIN_HZ 25000000
25/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */
26/* 1 = CLKIN / 2 */
27#define CONFIG_CLKIN_HALF 0
28/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */
29/* 1 = bypass PLL */
30#define CONFIG_PLL_BYPASS 0
31/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */
32/* Values can range from 0-63 (where 0 means 64) */
33#define CONFIG_VCO_MULT 21
34/* CCLK_DIV controls the core clock divider */
35/* Values can be 1, 2, 4, or 8 ONLY */
36#define CONFIG_CCLK_DIV 1
37/* SCLK_DIV controls the system clock divider */
38/* Values can range from 1-15 */
39#define CONFIG_SCLK_DIV 4
40
41
42/*
43 * Memory Settings
44 */
45#define CONFIG_MEM_ADD_WDTH 10
46#define CONFIG_MEM_SIZE 64
47
48#define CONFIG_EBIU_SDRRC_VAL (0x03F6)
49#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | PSS | TWR_2 | TRCD_3 | TRP_3 | TRAS_6 | PASR_ALL | CL_3)
50
51#define CONFIG_EBIU_AMGCTL_VAL (CDPRIO | AMBEN_ALL | AMCKEN)
52#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
53#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
54
55#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
56#define CONFIG_SYS_MALLOC_LEN (384 * 1024)
57
58
59/*
60 * Network Settings
61 */
62#define ADI_CMDS_NETWORK 1
Ben Warren7194ab82009-10-04 22:37:03 -070063#define CONFIG_SMC91111 1
Mike Frysinger5c45f7c2008-10-12 21:25:33 -040064#define CONFIG_SMC91111_BASE 0x20310300
65#define CONFIG_HOSTNAME bf538f-ezkit
66/* Uncomment next line to use fixed MAC address */
67/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */
68
69
70/*
71 * Flash Settings
72 */
73#define CONFIG_FLASH_CFI_DRIVER
74#define CONFIG_SYS_FLASH_BASE 0x20000000
75#define CONFIG_SYS_FLASH_CFI
76#define CONFIG_SYS_FLASH_PROTECTION
77#define CONFIG_SYS_MAX_FLASH_BANKS 1
78#define CONFIG_SYS_MAX_FLASH_SECT 71
79
80
81/*
82 * SPI Settings
83 */
84#define CONFIG_BFIN_SPI
85#define CONFIG_ENV_SPI_MAX_HZ 30000000
Mike Frysingerafac8b02009-06-14 22:29:35 -040086#define CONFIG_SF_DEFAULT_SPEED 30000000
Mike Frysinger5c45f7c2008-10-12 21:25:33 -040087#define CONFIG_SPI_FLASH
Mike Frysingerf4532202010-09-19 16:26:55 -040088#define CONFIG_SPI_FLASH_ALL
Mike Frysinger5c45f7c2008-10-12 21:25:33 -040089
90
91/*
92 * Env Storage Settings
93 */
94#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER)
95#define CONFIG_ENV_IS_IN_SPI_FLASH
96#define CONFIG_ENV_OFFSET 0x4000
97#define CONFIG_ENV_SIZE 0x2000
98#define CONFIG_ENV_SECT_SIZE 0x2000
99#else
100#define CONFIG_ENV_IS_IN_FLASH
101#define CONFIG_ENV_OFFSET 0x4000
102#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
103#define CONFIG_ENV_SIZE 0x2000
104#define CONFIG_ENV_SECT_SIZE 0x2000
105#endif
106#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
107#define ENV_IS_EMBEDDED
108#else
Mike Frysinger76d82182009-07-21 22:17:36 -0400109#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
Mike Frysinger5c45f7c2008-10-12 21:25:33 -0400110#endif
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400111#ifdef ENV_IS_EMBEDDED
112/* WARNING - the following is hand-optimized to fit within
113 * the sector before the environment sector. If it throws
114 * an error during compilation remove an object here to get
115 * it linked after the configuration sector.
116 */
117# define LDS_BOARD_TEXT \
Mike Frysingerc70e7dd2010-11-19 19:28:56 -0500118 arch/blackfin/lib/libblackfin.o (.text*); \
119 arch/blackfin/cpu/libblackfin.o (.text*); \
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400120 . = DEFINED(env_offset) ? env_offset : .; \
Mike Frysingerc70e7dd2010-11-19 19:28:56 -0500121 common/env_embedded.o (.text*);
Mike Frysinger9ff67e52009-06-14 06:29:07 -0400122#endif
Mike Frysinger5c45f7c2008-10-12 21:25:33 -0400123
124
125/*
126 * I2C Settings
127 */
128#define CONFIG_BFIN_TWI_I2C 1
129#define CONFIG_HARD_I2C 1
Mike Frysinger5c45f7c2008-10-12 21:25:33 -0400130
131
132/*
133 * Misc Settings
134 */
135#define CONFIG_RTC_BFIN
136#define CONFIG_UART_CONSOLE 0
137
138
139/*
140 * Pull in common ADI header for remaining command/environment setup
141 */
142#include <configs/bfin_adi_common.h>
143
Mike Frysinger5c45f7c2008-10-12 21:25:33 -0400144#endif