blob: 6276d43395ea0534f42f67d34af0d7475d435662 [file] [log] [blame]
Heiko Schocherc0dcece2013-08-19 16:39:01 +02001/*
2 * siemens pxm2
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
5 *
6 * Based on:
7 * U-Boot file:/include/configs/am335x_evm.h
8 *
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef __CONFIG_PXM2_H
15#define __CONFIG_PXM2_H
16
17#define CONFIG_SIEMENS_PXM2
18#define MACH_TYPE_PXM2 4309
19#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2
20
21#include "siemens-am33x-common.h"
22
23#define CONFIG_SYS_MPUCLK 720
24#define DXR2_IOCTRL_VAL 0x18b
25#define DDR_PLL_FREQ 266
26
27#define BOARD_DFU_BUTTON_GPIO 59
28#define BOARD_DFU_BUTTON_LED 117
29#define BOARD_LCD_POWER 111
30#define BOARD_BACK_LIGHT 112
31#define BOARD_TOUCH_POWER 57
32
33 /* Physical Memory Map */
34#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */
35
36/* I2C Configuration */
37#define CONFIG_SYS_I2C_SPEED 400000
38#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
39
40
41#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
42
43#undef CONFIG_SPL_NET_SUPPORT
44#undef CONFIG_SPL_NET_VCI_STRING
45#undef CONFIG_SPL_ETH_SUPPORT
46
Heiko Schocherc0dcece2013-08-19 16:39:01 +020047#define CONFIG_PHY_ATHEROS
48
49#define CONFIG_FACTORYSET
50
51/* UBI Support */
52#ifndef CONFIG_SPL_BUILD
53#define CONFIG_CMD_MTDPARTS
54#define CONFIG_MTD_PARTITIONS
55#define CONFIG_MTD_DEVICE
56#define CONFIG_RBTREE
57#define CONFIG_LZO
58#define CONFIG_CMD_UBI
59#define CONFIG_CMD_UBIFS
60#endif
61
62/* Watchdog */
63#define CONFIG_OMAP_WATCHDOG
64
65#ifndef CONFIG_SPL_BUILD
66
67/* Default env settings */
68#define CONFIG_EXTRA_ENV_SETTINGS \
69 "hostname=pxm2\0" \
70 "nand_img_size=0x500000\0" \
71 "optargs=\0" \
Samuel Egli56eb3da2013-11-04 14:05:03 +010072 "splashpos=m,m\0" \
Heiko Schocherc0dcece2013-08-19 16:39:01 +020073 CONFIG_COMMON_ENV_SETTINGS \
74 "mmc_dev=0\0" \
75 "mmc_root=/dev/mmcblk0p2 rw\0" \
76 "mmc_root_fs_type=ext4 rootwait\0" \
77 "mmc_load_uimage=" \
78 "mmc rescan; " \
79 "setenv bootfile uImage;" \
80 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
81 "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
82 "importbootenv=echo Importing environment from mmc ...; " \
83 "env import -t $loadaddr $filesize\0" \
84 "mmc_args=run bootargs_defaults;" \
85 "mtdparts default;" \
86 "setenv bootargs ${bootargs} " \
87 "root=${mmc_root} ${mtdparts}" \
88 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
89 "eth=${ethaddr} " \
90 "\0" \
91 "mmc_boot=run mmc_args; " \
92 "run mmc_load_uimage; " \
93 "bootm ${kloadaddr}\0" \
94 ""
95
96#ifndef CONFIG_RESTORE_FLASH
97/* set to negative value for no autoboot */
98#define CONFIG_BOOTDELAY 3
99
100#define CONFIG_BOOTCOMMAND \
101 "if dfubutton; then " \
102 "run dfu_start; " \
103 "reset; " \
104 "fi; " \
105 "if mmc rescan; then " \
106 "echo SD/MMC found on device ${mmc_dev};" \
107 "if run loadbootenv; then " \
108 "echo Loaded environment from ${bootenv};" \
109 "run importbootenv;" \
110 "fi;" \
111 "if test -n $uenvcmd; then " \
112 "echo Running uenvcmd ...;" \
113 "run uenvcmd;" \
114 "fi;" \
115 "if run mmc_load_uimage; then " \
116 "run mmc_args;" \
117 "bootm ${kloadaddr};" \
118 "fi;" \
119 "fi;" \
120 "run nand_boot;" \
Samuel Egli56eb3da2013-11-04 14:05:03 +0100121 "reset;"
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200122
123#else
124#define CONFIG_BOOTDELAY 0
125
126#define CONFIG_BOOTCOMMAND \
127 "setenv autoload no; " \
128 "dhcp; " \
129 "if tftp 80000000 debrick.scr; then " \
130 "source 80000000; " \
131 "fi"
132#endif
133#endif /* CONFIG_SPL_BUILD */
134
135#define CONFIG_VIDEO
136#if defined(CONFIG_VIDEO)
137#define CONFIG_VIDEO_DA8XX
138#define CONFIG_CFB_CONSOLE
139#define CONFIG_VGA_AS_SINGLE_DEVICE
140#define CONFIG_SPLASH_SCREEN
141#define CONFIG_SPLASH_SCREEN_ALIGN
142#define CONFIG_VIDEO_LOGO
143#define CONFIG_VIDEO_BMP_RLE8
144#define CONFIG_VIDEO_BMP_LOGO
145#define CONFIG_CMD_BMP
146#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE
147#define PWM_TICKS 0x1388
148#define PWM_DUTY 0x200
Samuel Egli56eb3da2013-11-04 14:05:03 +0100149#define CONFIG_SYS_CONSOLE_BG_COL 0xff
150#define CONFIG_SYS_CONSOLE_FG_COL 0x00
Heiko Schocherc0dcece2013-08-19 16:39:01 +0200151#endif
152
153#endif /* ! __CONFIG_PXM2_H */