blob: 23497f982587748d872b8b6ce2da4c7c69b67756 [file] [log] [blame]
Kumar Gala9bd4e592008-08-26 15:01:37 -05001/*
2 * Copyright 2008 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * Version 2 as published by the Free Software Foundation.
7 */
8
9#include <common.h>
10#include <i2c.h>
11
12#include <asm/fsl_ddr_sdram.h>
Haiying Wangdfb49102008-10-03 12:36:55 -040013#include <asm/fsl_ddr_dimm_params.h>
Kumar Gala9bd4e592008-08-26 15:01:37 -050014
15static void
16get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
17{
18 i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
19}
20
21unsigned int fsl_ddr_get_mem_data_rate(void)
22{
23 return get_bus_freq(0);
24}
25
26void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
27 unsigned int ctrl_num)
28{
29 unsigned int i;
30 unsigned int i2c_address = 0;
31
32 for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
33 if (ctrl_num == 0 && i == 0) {
34 i2c_address = SPD_EEPROM_ADDRESS1;
35 }
36 if (ctrl_num == 0 && i == 1) {
37 i2c_address = SPD_EEPROM_ADDRESS2;
38 }
39 if (ctrl_num == 1 && i == 0) {
40 i2c_address = SPD_EEPROM_ADDRESS3;
41 }
42 if (ctrl_num == 1 && i == 1) {
43 i2c_address = SPD_EEPROM_ADDRESS4;
44 }
45 get_spd(&(ctrl_dimms_spd[i]), i2c_address);
46 }
47}
48
Haiying Wangdfb49102008-10-03 12:36:55 -040049void fsl_ddr_board_options(memctl_options_t *popts,
50 dimm_params_t *pdimm,
51 unsigned int ctrl_num)
Kumar Gala9bd4e592008-08-26 15:01:37 -050052{
53 /*
54 * Factors to consider for clock adjust:
55 * - number of chips on bus
56 * - position of slot
57 * - DDR1 vs. DDR2?
58 * - ???
59 *
60 * This needs to be determined on a board-by-board basis.
61 * 0110 3/4 cycle late
62 * 0111 7/8 cycle late
63 */
64 popts->clk_adjust = 7;
65
66 /*
67 * Factors to consider for CPO:
68 * - frequency
69 * - ddr1 vs. ddr2
70 */
71 popts->cpo_override = 10;
72
73 /*
74 * Factors to consider for write data delay:
75 * - number of DIMMs
76 *
77 * 1 = 1/4 clock delay
78 * 2 = 1/2 clock delay
79 * 3 = 3/4 clock delay
80 * 4 = 1 clock delay
81 * 5 = 5/4 clock delay
82 * 6 = 3/2 clock delay
83 */
84 popts->write_data_delay = 3;
85
86 /*
87 * Factors to consider for half-strength driver enable:
88 * - number of DIMMs installed
89 */
90 popts->half_strength_driver_enable = 0;
91}