blob: 5aff8ecc66cbb9510571b24224cf8313e9fa9fee [file] [log] [blame]
Hans de Goeded6e6d4b2015-11-20 16:03:56 +01001/*
2 * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
Hans de Goede80e5f832016-03-14 17:37:09 +010048#include <dt-bindings/input/input.h>
Hans de Goeded6e6d4b2015-11-20 16:03:56 +010049
50/ {
51 model = "Xunlong Orange Pi PC";
52 compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
53
54 aliases {
Andre Przywarae88d2a52018-04-04 01:31:18 +010055 ethernet0 = &emac;
Hans de Goeded6e6d4b2015-11-20 16:03:56 +010056 serial0 = &uart0;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
Hans de Goede80e5f832016-03-14 17:37:09 +010062
Andre Przywara2d0c3d62018-07-04 14:16:38 +010063 connector {
64 compatible = "hdmi-connector";
65 type = "a";
66
67 port {
68 hdmi_con_in: endpoint {
69 remote-endpoint = <&hdmi_out_con>;
70 };
71 };
72 };
73
Hans de Goede80e5f832016-03-14 17:37:09 +010074 leds {
75 compatible = "gpio-leds";
Hans de Goede80e5f832016-03-14 17:37:09 +010076
Hans de Goede860fbdd2016-08-18 20:51:12 +020077 pwr_led {
78 label = "orangepi:green:pwr";
Hans de Goede80e5f832016-03-14 17:37:09 +010079 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
80 default-state = "on";
81 };
Hans de Goede860fbdd2016-08-18 20:51:12 +020082
83 status_led {
84 label = "orangepi:red:status";
85 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
86 };
Hans de Goede80e5f832016-03-14 17:37:09 +010087 };
88
89 r_gpio_keys {
90 compatible = "gpio-keys";
Hans de Goede80e5f832016-03-14 17:37:09 +010091
Hans de Goede860fbdd2016-08-18 20:51:12 +020092 sw4 {
Hans de Goede80e5f832016-03-14 17:37:09 +010093 label = "sw4";
94 linux,code = <BTN_0>;
95 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
96 };
97 };
Hans de Goeded6e6d4b2015-11-20 16:03:56 +010098};
99
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100100&codec {
101 allwinner,audio-routing =
102 "Line Out", "LINEOUT",
103 "MIC1", "Mic",
104 "Mic", "MBIAS";
105 status = "okay";
106};
107
108&de {
109 status = "okay";
110};
111
112&cpu0 {
113 cpu-supply = <&reg_vdd_cpux>;
114};
115
116&ehci0 {
117 status = "okay";
118};
119
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100120&ehci1 {
121 status = "okay";
122};
123
124&ehci2 {
125 status = "okay";
126};
127
128&ehci3 {
129 status = "okay";
130};
131
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100132&emac {
133 phy-handle = <&int_mii_phy>;
134 phy-mode = "mii";
135 allwinner,leds-active-low;
136 status = "okay";
137};
138
139&hdmi {
140 status = "okay";
141};
142
143&hdmi_out {
144 hdmi_out_con: endpoint {
145 remote-endpoint = <&hdmi_con_in>;
146 };
147};
148
Hans de Goede80e5f832016-03-14 17:37:09 +0100149&ir {
150 pinctrl-names = "default";
Chen-Yu Tsaib5fe5232020-01-12 23:36:13 +0800151 pinctrl-0 = <&r_ir_rx_pin>;
Hans de Goede80e5f832016-03-14 17:37:09 +0100152 status = "okay";
153};
154
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100155&mmc0 {
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100156 vmmc-supply = <&reg_vcc3v3>;
157 bus-width = <4>;
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100158 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
159 status = "okay";
160};
161
162&ohci0 {
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100163 status = "okay";
164};
165
166&ohci1 {
167 status = "okay";
168};
169
170&ohci2 {
171 status = "okay";
172};
173
174&ohci3 {
175 status = "okay";
176};
177
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100178&r_i2c {
179 status = "okay";
180
181 reg_vdd_cpux: regulator@65 {
182 compatible = "silergy,sy8106a";
183 reg = <0x65>;
184 regulator-name = "vdd-cpux";
185 silergy,fixed-microvolt = <1200000>;
186 /*
187 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
188 * however both the Armbian DVFS table and the official one
189 * have operating points with voltage under 1.1V, and both
190 * DVFS table are known to work properly at the lowest
191 * operating point.
192 *
193 * Use 1.0V as the minimum voltage instead.
194 */
195 regulator-min-microvolt = <1000000>;
196 regulator-max-microvolt = <1300000>;
197 regulator-boot-on;
198 regulator-always-on;
Hans de Goede80e5f832016-03-14 17:37:09 +0100199 };
200};
201
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100202&reg_usb0_vbus {
203 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
204 status = "okay";
205};
206
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100207&uart0 {
208 pinctrl-names = "default";
Chen-Yu Tsaib5fe5232020-01-12 23:36:13 +0800209 pinctrl-0 = <&uart0_pa_pins>;
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100210 status = "okay";
211};
212
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100213&uart1 {
214 pinctrl-names = "default";
215 pinctrl-0 = <&uart1_pins>;
216 status = "disabled";
217};
218
219&uart2 {
220 pinctrl-names = "default";
221 pinctrl-0 = <&uart2_pins>;
222 status = "disabled";
223};
224
225&uart3 {
226 pinctrl-names = "default";
227 pinctrl-0 = <&uart3_pins>;
228 status = "disabled";
229};
230
231&usb_otg {
232 dr_mode = "otg";
Hans de Goeded6e6d4b2015-11-20 16:03:56 +0100233 status = "okay";
234};
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530235
Andre Przywara2d0c3d62018-07-04 14:16:38 +0100236&usbphy {
237 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
238 usb0_vbus-supply = <&reg_usb0_vbus>;
239 /* VBUS on USB host ports are always on */
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530240 status = "okay";
Amit Singh Tomara29710c2016-07-06 17:59:44 +0530241};