blob: 0b84dae2157f655d990f5aa7154872f4e3479dec [file] [log] [blame]
Marcel Ziswilerbf78b272014-09-05 10:18:38 +02001/dts-v1/;
2
3#include "tegra30.dtsi"
4
5/ {
6 model = "Toradex Apalis T30";
7 compatible = "toradex,apalis_t30", "nvidia,tegra30";
8
Marcel Ziswiler9aafef42014-10-11 00:34:04 +02009 chosen {
10 stdout-path = &uarta;
11 };
12
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020013 aliases {
14 i2c0 = "/i2c@7000d000";
15 i2c1 = "/i2c@7000c000";
16 i2c2 = "/i2c@7000c500";
17 i2c3 = "/i2c@7000c700";
Stephen Warren67748a72016-09-13 10:45:43 -060018 mmc0 = "/sdhci@78000600";
19 mmc1 = "/sdhci@78000400";
20 mmc2 = "/sdhci@78000000";
Marcel Ziswilercbaecea2015-03-01 02:05:36 +010021 spi0 = "/spi@7000d400";
22 spi1 = "/spi@7000dc00";
23 spi2 = "/spi@7000de00";
24 spi3 = "/spi@7000da00";
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020025 usb0 = "/usb@7d000000";
26 usb1 = "/usb@7d004000";
27 usb2 = "/usb@7d008000";
28 };
29
30 memory {
31 device_type = "memory";
32 reg = <0x80000000 0x40000000>;
33 };
34
35 pcie-controller@00003000 {
36 status = "okay";
37 avdd-pexa-supply = <&vdd2_reg>;
38 vdd-pexa-supply = <&vdd2_reg>;
39 avdd-pexb-supply = <&vdd2_reg>;
40 vdd-pexb-supply = <&vdd2_reg>;
41 avdd-pex-pll-supply = <&vdd2_reg>;
42 avdd-plle-supply = <&ldo6_reg>;
43 vddio-pex-ctl-supply = <&sys_3v3_reg>;
44 hvdd-pex-supply = <&sys_3v3_reg>;
45
46 pci@1,0 {
Marcel Ziswilerf0adaf92016-12-19 15:38:06 +010047 /* TS_DIFF1/2/3/4 left disabled */
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020048 nvidia,num-lanes = <4>;
49 };
50
51 pci@2,0 {
Marcel Ziswilerf0adaf92016-12-19 15:38:06 +010052 /* PCIE1_RX/TX left disabled */
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020053 nvidia,num-lanes = <1>;
54 };
55
56 pci@3,0 {
57 status = "okay";
58 nvidia,num-lanes = <1>;
59 };
60 };
61
62 /*
63 * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
64 * board)
65 */
66 i2c@7000c000 {
67 status = "okay";
Marcel Ziswiler33848eb2017-07-20 14:57:44 +020068 clock-frequency = <400000>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020069 };
70
71 /* GEN2_I2C: unused */
72
73 /*
74 * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
75 * carrier board)
76 */
77 i2c@7000c500 {
78 status = "okay";
Marcel Ziswiler33848eb2017-07-20 14:57:44 +020079 clock-frequency = <400000>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020080 };
81
82 /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
83 i2c@7000c700 {
84 status = "okay";
Marcel Ziswiler33848eb2017-07-20 14:57:44 +020085 clock-frequency = <10000>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +020086 };
87
88 /*
89 * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
90 * touch screen controller
91 */
92 i2c@7000d000 {
93 status = "okay";
94 clock-frequency = <100000>;
95
96 pmic: tps65911@2d {
97 compatible = "ti,tps65911";
98 reg = <0x2d>;
99
100 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
101 #interrupt-cells = <2>;
102 interrupt-controller;
103
104 ti,system-power-controller;
105
106 #gpio-cells = <2>;
107 gpio-controller;
108
109 vcc1-supply = <&sys_3v3_reg>;
110 vcc2-supply = <&sys_3v3_reg>;
111 vcc3-supply = <&vio_reg>;
112 vcc4-supply = <&sys_3v3_reg>;
113 vcc5-supply = <&sys_3v3_reg>;
114 vcc6-supply = <&vio_reg>;
115 vcc7-supply = <&charge_pump_5v0_reg>;
116 vccio-supply = <&sys_3v3_reg>;
117
118 regulators {
119 #address-cells = <1>;
120 #size-cells = <0>;
121
122 /* SW1: +V1.35_VDDIO_DDR */
123 vdd1_reg: vdd1 {
124 regulator-name = "vddio_ddr_1v35";
125 regulator-min-microvolt = <1350000>;
126 regulator-max-microvolt = <1350000>;
127 regulator-always-on;
128 };
129
130 /* SW2: +V1.05 */
131 vdd2_reg: vdd2 {
132 regulator-name =
133 "vdd_pexa,vdd_pexb,vdd_sata";
134 regulator-min-microvolt = <1050000>;
135 regulator-max-microvolt = <1050000>;
136 };
137
138 /* SW CTRL: +V1.0_VDD_CPU */
139 vddctrl_reg: vddctrl {
140 regulator-name = "vdd_cpu,vdd_sys";
141 regulator-min-microvolt = <1150000>;
142 regulator-max-microvolt = <1150000>;
143 regulator-always-on;
144 };
145
146 /* SWIO: +V1.8 */
147 vio_reg: vio {
148 regulator-name = "vdd_1v8_gen";
149 regulator-min-microvolt = <1800000>;
150 regulator-max-microvolt = <1800000>;
151 regulator-always-on;
152 };
153
154 /* LDO1: unused */
155
156 /*
157 * EN_+V3.3 switching via FET:
158 * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
159 * see also v3_3 fixed supply
160 */
161 ldo2_reg: ldo2 {
162 regulator-name = "en_3v3";
163 regulator-min-microvolt = <3300000>;
164 regulator-max-microvolt = <3300000>;
165 regulator-always-on;
166 };
167
168 /* +V1.2_CSI */
169 ldo3_reg: ldo3 {
170 regulator-name =
171 "avdd_dsi_csi,pwrdet_mipi";
172 regulator-min-microvolt = <1200000>;
173 regulator-max-microvolt = <1200000>;
174 };
175
176 /* +V1.2_VDD_RTC */
177 ldo4_reg: ldo4 {
178 regulator-name = "vdd_rtc";
179 regulator-min-microvolt = <1200000>;
180 regulator-max-microvolt = <1200000>;
181 regulator-always-on;
182 };
183
184 /*
185 * +V2.8_AVDD_VDAC:
186 * only required for analog RGB
187 */
188 ldo5_reg: ldo5 {
189 regulator-name = "avdd_vdac";
190 regulator-min-microvolt = <2800000>;
191 regulator-max-microvolt = <2800000>;
192 regulator-always-on;
193 };
194
195 /*
196 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
197 * but LDO6 can't set voltage in 50mV
198 * granularity
199 */
200 ldo6_reg: ldo6 {
201 regulator-name = "avdd_plle";
202 regulator-min-microvolt = <1100000>;
203 regulator-max-microvolt = <1100000>;
204 };
205
206 /* +V1.2_AVDD_PLL */
207 ldo7_reg: ldo7 {
208 regulator-name = "avdd_pll";
209 regulator-min-microvolt = <1200000>;
210 regulator-max-microvolt = <1200000>;
211 regulator-always-on;
212 };
213
214 /* +V1.0_VDD_DDR_HS */
215 ldo8_reg: ldo8 {
216 regulator-name = "vdd_ddr_hs";
217 regulator-min-microvolt = <1000000>;
218 regulator-max-microvolt = <1000000>;
219 regulator-always-on;
220 };
221 };
222 };
223 };
224
225 /* SPI1: Apalis SPI1 */
226 spi@7000d400 {
227 status = "okay";
228 spi-max-frequency = <25000000>;
229 };
230
231 /* SPI4: CAN2 */
232 spi@7000da00 {
233 status = "okay";
234 spi-max-frequency = <25000000>;
235 };
236
237 /* SPI5: Apalis SPI2 */
238 spi@7000dc00 {
239 status = "okay";
240 spi-max-frequency = <25000000>;
241 };
242
243 /* SPI6: CAN1 */
244 spi@7000de00 {
245 status = "okay";
246 spi-max-frequency = <25000000>;
247 };
248
249 sdhci@78000000 {
250 status = "okay";
251 bus-width = <4>;
Marcel Ziswiler72731112015-03-01 02:05:37 +0100252 /* SD1_CD# */
253 cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200254 };
255
256 sdhci@78000400 {
257 status = "okay";
258 bus-width = <8>;
Marcel Ziswiler72731112015-03-01 02:05:37 +0100259 /* MMC1_CD# */
260 cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200261 };
262
263 sdhci@78000600 {
264 status = "okay";
265 bus-width = <8>;
266 non-removable;
267 };
268
269 /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
270 usb@7d000000 {
271 status = "okay";
Marcel Ziswiler29ce9992015-08-06 00:47:12 +0200272 dr_mode = "otg";
Marcel Ziswiler72731112015-03-01 02:05:37 +0100273 /* USBO1_EN */
Simon Glass2b2b50b2015-01-05 20:05:41 -0700274 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200275 };
276
277 /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
278 usb@7d004000 {
279 status = "okay";
Marcel Ziswiler72731112015-03-01 02:05:37 +0100280 /* USBH_EN */
Simon Glass2b2b50b2015-01-05 20:05:41 -0700281 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200282 };
283
284 /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
285 usb@7d008000 {
286 status = "okay";
Marcel Ziswiler72731112015-03-01 02:05:37 +0100287 /* USBH_EN */
Simon Glass2b2b50b2015-01-05 20:05:41 -0700288 nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200289 };
290
Stephen Warrence2f2d22016-09-13 10:45:51 -0600291 clocks {
292 compatible = "simple-bus";
293 #address-cells = <1>;
294 #size-cells = <0>;
295
296 clk32k_in: clk@0 {
297 compatible = "fixed-clock";
298 reg=<0>;
299 #clock-cells = <0>;
300 clock-frequency = <32768>;
301 };
302 clk16m: clk@1 {
303 compatible = "fixed-clock";
304 reg=<1>;
305 #clock-cells = <0>;
306 clock-frequency = <16000000>;
307 clock-output-names = "clk16m";
308 };
309 };
310
Marcel Ziswilerbf78b272014-09-05 10:18:38 +0200311 regulators {
312 compatible = "simple-bus";
313 #address-cells = <1>;
314 #size-cells = <0>;
315
316 sys_3v3_reg: regulator@100 {
317 compatible = "regulator-fixed";
318 reg = <100>;
319 regulator-name = "3v3";
320 regulator-min-microvolt = <3300000>;
321 regulator-max-microvolt = <3300000>;
322 regulator-always-on;
323 };
324
325 charge_pump_5v0_reg: regulator@101 {
326 compatible = "regulator-fixed";
327 reg = <101>;
328 regulator-name = "5v0";
329 regulator-min-microvolt = <5000000>;
330 regulator-max-microvolt = <5000000>;
331 regulator-always-on;
332 };
333 };
334};
Simon Glassf53dcc02017-06-12 06:22:01 -0600335
336&uarta {
337 status = "okay";
338};