blob: 22e5afad6e01b55c9f35243cc28276fe34171fbe [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +05302/*
3 * Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com>
4 * Copyright (C) 2015 Toradex AG
5 *
6 * Based on ehci-mx6 driver
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +05307 */
8
9#include <common.h>
Sanchayan Maity0885cdb2016-08-09 23:44:59 +053010#include <dm.h>
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +053011#include <usb.h>
12#include <errno.h>
13#include <linux/compiler.h>
14#include <asm/io.h>
Sanchayan Maity0885cdb2016-08-09 23:44:59 +053015#include <asm-generic/gpio.h>
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +053016#include <asm/arch/clock.h>
17#include <asm/arch/imx-regs.h>
18#include <asm/arch/crm_regs.h>
Stefano Babic552a8482017-06-29 10:16:06 +020019#include <asm/mach-imx/iomux-v3.h>
20#include <asm/mach-imx/regs-usbphy.h>
Mateusz Kulikowskie162c6b2016-03-31 23:12:23 +020021#include <usb/ehci-ci.h>
Masahiro Yamadab08c8c42018-03-05 01:20:11 +090022#include <linux/libfdt.h>
Sanchayan Maity0885cdb2016-08-09 23:44:59 +053023#include <fdtdec.h>
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +053024
25#include "ehci.h"
26
27#define USB_NC_REG_OFFSET 0x00000800
28
29#define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6)
30
31#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
32#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
33
34/* USBCMD */
35#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
36#define UCMD_RESET (1 << 1) /* controller reset */
37
Sanchayan Maity0885cdb2016-08-09 23:44:59 +053038DECLARE_GLOBAL_DATA_PTR;
39
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +053040static const unsigned phy_bases[] = {
41 USB_PHY0_BASE_ADDR,
42 USB_PHY1_BASE_ADDR,
43};
44
45static const unsigned nc_reg_bases[] = {
46 USBC0_BASE_ADDR,
47 USBC1_BASE_ADDR,
48};
49
50static void usb_internal_phy_clock_gate(int index)
51{
52 void __iomem *phy_reg;
53
54 phy_reg = (void __iomem *)phy_bases[index];
55 clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE);
56}
57
58static void usb_power_config(int index)
59{
60 struct anadig_reg __iomem *anadig =
61 (struct anadig_reg __iomem *)ANADIG_BASE_ADDR;
62 void __iomem *pll_ctrl;
63
64 switch (index) {
65 case 0:
66 pll_ctrl = &anadig->pll3_ctrl;
67 clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS);
68 setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE
69 | ANADIG_PLL3_CTRL_POWERDOWN
70 | ANADIG_PLL_CTRL_EN_USB_CLKS);
71 break;
72 case 1:
73 pll_ctrl = &anadig->pll7_ctrl;
74 clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS);
75 setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE
76 | ANADIG_PLL7_CTRL_POWERDOWN
77 | ANADIG_PLL_CTRL_EN_USB_CLKS);
78 break;
79 default:
80 return;
81 }
82}
83
84static void usb_phy_enable(int index, struct usb_ehci *ehci)
85{
86 void __iomem *phy_reg;
87 void __iomem *phy_ctrl;
88 void __iomem *usb_cmd;
89
90 phy_reg = (void __iomem *)phy_bases[index];
91 phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
92 usb_cmd = (void __iomem *)&ehci->usbcmd;
93
94 /* Stop then Reset */
95 clrbits_le32(usb_cmd, UCMD_RUN_STOP);
96 while (readl(usb_cmd) & UCMD_RUN_STOP)
97 ;
98
99 setbits_le32(usb_cmd, UCMD_RESET);
100 while (readl(usb_cmd) & UCMD_RESET)
101 ;
102
103 /* Reset USBPHY module */
104 setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST);
105 udelay(10);
106
107 /* Remove CLKGATE and SFTRST */
108 clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
109 udelay(10);
110
111 /* Power up the PHY */
112 writel(0, phy_reg + USBPHY_PWD);
113
114 /* Enable FS/LS device */
115 setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 |
116 USBPHY_CTRL_ENUTMILEVEL3);
117}
118
119static void usb_oc_config(int index)
120{
121 void __iomem *ctrl;
122
123 ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET);
124
125 setbits_le32(ctrl, UCTRL_OVER_CUR_POL);
126 setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
127}
128
Sanchayan Maity08c11cb2015-10-26 18:28:50 +0530129int __weak board_usb_phy_mode(int port)
130{
131 return 0;
132}
133
Sanchayan Maity60ed2862015-06-01 18:37:24 +0530134int __weak board_ehci_hcd_init(int port)
135{
136 return 0;
137}
138
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530139int ehci_vf_common_init(struct usb_ehci *ehci, int index)
140{
141 int ret;
142
143 /* Do board specific initialisation */
144 ret = board_ehci_hcd_init(index);
145 if (ret)
146 return ret;
147
148 usb_power_config(index);
149 usb_oc_config(index);
150 usb_internal_phy_clock_gate(index);
151 usb_phy_enable(index, ehci);
152
153 return 0;
154}
155
156#ifndef CONFIG_DM_USB
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +0530157int ehci_hcd_init(int index, enum usb_init_type init,
158 struct ehci_hccr **hccr, struct ehci_hcor **hcor)
159{
160 struct usb_ehci *ehci;
Sanchayan Maity08c11cb2015-10-26 18:28:50 +0530161 enum usb_init_type type;
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530162 int ret;
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +0530163
164 if (index >= ARRAY_SIZE(nc_reg_bases))
165 return -EINVAL;
166
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +0530167 ehci = (struct usb_ehci *)nc_reg_bases[index];
168
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530169 ret = ehci_vf_common_init(index);
170 if (ret)
171 return ret;
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +0530172
173 *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
174 *hcor = (struct ehci_hcor *)((uint32_t)*hccr +
175 HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
176
Sanchayan Maity08c11cb2015-10-26 18:28:50 +0530177 type = board_usb_phy_mode(index);
178 if (type != init)
179 return -ENODEV;
180
Sanchayan Maitya94bb7a2015-04-15 16:24:27 +0530181 if (init == USB_INIT_DEVICE) {
182 setbits_le32(&ehci->usbmode, CM_DEVICE);
183 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
184 setbits_le32(&ehci->portsc, USB_EN);
185 } else if (init == USB_INIT_HOST) {
186 setbits_le32(&ehci->usbmode, CM_HOST);
187 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
188 setbits_le32(&ehci->portsc, USB_EN);
189 }
190
191 return 0;
192}
193
194int ehci_hcd_stop(int index)
195{
196 return 0;
197}
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530198#else
199/* Possible port types (dual role mode) */
200enum dr_mode {
201 DR_MODE_NONE = 0,
202 DR_MODE_HOST, /* supports host operation */
203 DR_MODE_DEVICE, /* supports device operation */
204 DR_MODE_OTG, /* supports both */
205};
206
207struct ehci_vf_priv_data {
208 struct ehci_ctrl ctrl;
209 struct usb_ehci *ehci;
210 struct gpio_desc cdet_gpio;
211 enum usb_init_type init_type;
212 enum dr_mode dr_mode;
213 u32 portnr;
214};
215
216static int vf_usb_ofdata_to_platdata(struct udevice *dev)
217{
218 struct ehci_vf_priv_data *priv = dev_get_priv(dev);
219 const void *dt_blob = gd->fdt_blob;
Simon Glasse160f7d2017-01-17 16:52:55 -0700220 int node = dev_of_offset(dev);
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530221 const char *mode;
222
223 priv->portnr = dev->seq;
224
Simon Glassa821c4a2017-05-17 17:18:05 -0600225 priv->ehci = (struct usb_ehci *)devfdt_get_addr(dev);
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530226 mode = fdt_getprop(dt_blob, node, "dr_mode", NULL);
227 if (mode) {
228 if (0 == strcmp(mode, "host")) {
229 priv->dr_mode = DR_MODE_HOST;
230 priv->init_type = USB_INIT_HOST;
231 } else if (0 == strcmp(mode, "peripheral")) {
232 priv->dr_mode = DR_MODE_DEVICE;
233 priv->init_type = USB_INIT_DEVICE;
234 } else if (0 == strcmp(mode, "otg")) {
235 priv->dr_mode = DR_MODE_OTG;
236 /*
237 * We set init_type to device by default when OTG
238 * mode is requested. If a valid gpio is provided
239 * we will switch the init_type based on the state
240 * of the gpio pin.
241 */
242 priv->init_type = USB_INIT_DEVICE;
243 } else {
244 debug("%s: Cannot decode dr_mode '%s'\n",
245 __func__, mode);
246 return -EINVAL;
247 }
248 } else {
249 priv->dr_mode = DR_MODE_HOST;
250 priv->init_type = USB_INIT_HOST;
251 }
252
253 if (priv->dr_mode == DR_MODE_OTG) {
Simon Glass150c5af2017-05-30 21:47:09 -0600254 gpio_request_by_name_nodev(offset_to_ofnode(node),
255 "fsl,cdet-gpio", 0, &priv->cdet_gpio,
256 GPIOD_IS_IN);
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530257 if (dm_gpio_is_valid(&priv->cdet_gpio)) {
258 if (dm_gpio_get_value(&priv->cdet_gpio))
259 priv->init_type = USB_INIT_DEVICE;
260 else
261 priv->init_type = USB_INIT_HOST;
262 }
263 }
264
265 return 0;
266}
267
268static int vf_init_after_reset(struct ehci_ctrl *dev)
269{
270 struct ehci_vf_priv_data *priv = dev->priv;
271 enum usb_init_type type = priv->init_type;
272 struct usb_ehci *ehci = priv->ehci;
273 int ret;
274
275 ret = ehci_vf_common_init(priv->ehci, priv->portnr);
276 if (ret)
277 return ret;
278
279 if (type == USB_INIT_DEVICE)
280 return 0;
281
282 setbits_le32(&ehci->usbmode, CM_HOST);
283 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
284 setbits_le32(&ehci->portsc, USB_EN);
285
286 mdelay(10);
287
288 return 0;
289}
290
291static const struct ehci_ops vf_ehci_ops = {
292 .init_after_reset = vf_init_after_reset
293};
294
295static int vf_usb_bind(struct udevice *dev)
296{
297 static int num_controllers;
298
299 /*
300 * Without this hack, if we return ENODEV for USB Controller 0, on
301 * probe for the next controller, USB Controller 1 will be given a
302 * sequence number of 0. This conflicts with our requirement of
303 * sequence numbers while initialising the peripherals.
304 */
305 dev->req_seq = num_controllers;
306 num_controllers++;
307
308 return 0;
309}
310
311static int ehci_usb_probe(struct udevice *dev)
312{
313 struct usb_platdata *plat = dev_get_platdata(dev);
314 struct ehci_vf_priv_data *priv = dev_get_priv(dev);
315 struct usb_ehci *ehci = priv->ehci;
316 struct ehci_hccr *hccr;
317 struct ehci_hcor *hcor;
318 int ret;
319
320 ret = ehci_vf_common_init(ehci, priv->portnr);
321 if (ret)
322 return ret;
323
324 if (priv->init_type != plat->init_type)
325 return -ENODEV;
326
327 if (priv->init_type == USB_INIT_HOST) {
328 setbits_le32(&ehci->usbmode, CM_HOST);
329 writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
330 setbits_le32(&ehci->portsc, USB_EN);
331 }
332
333 mdelay(10);
334
335 hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
336 hcor = (struct ehci_hcor *)((uint32_t)hccr +
337 HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
338
339 return ehci_register(dev, hccr, hcor, &vf_ehci_ops, 0, priv->init_type);
340}
341
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530342static const struct udevice_id vf_usb_ids[] = {
343 { .compatible = "fsl,vf610-usb" },
344 { }
345};
346
347U_BOOT_DRIVER(usb_ehci) = {
348 .name = "ehci_vf",
349 .id = UCLASS_USB,
350 .of_match = vf_usb_ids,
351 .bind = vf_usb_bind,
352 .probe = ehci_usb_probe,
Masahiro Yamada99e2df42016-10-14 10:29:37 +0900353 .remove = ehci_deregister,
Sanchayan Maity0885cdb2016-08-09 23:44:59 +0530354 .ops = &ehci_usb_ops,
355 .ofdata_to_platdata = vf_usb_ofdata_to_platdata,
356 .platdata_auto_alloc_size = sizeof(struct usb_platdata),
357 .priv_auto_alloc_size = sizeof(struct ehci_vf_priv_data),
358 .flags = DM_FLAG_ALLOC_PRIV_DMA,
359};
360#endif