| Stefan Roese | 4c835a6 | 2018-09-05 15:12:35 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | |
| 3 | / { |
| 4 | #address-cells = <1>; |
| 5 | #size-cells = <1>; |
| 6 | compatible = "ralink,mt7628a-soc"; |
| 7 | |
| 8 | cpus { |
| 9 | #address-cells = <1>; |
| 10 | #size-cells = <0>; |
| 11 | |
| 12 | cpu@0 { |
| 13 | compatible = "mti,mips24KEc"; |
| 14 | device_type = "cpu"; |
| 15 | reg = <0>; |
| 16 | }; |
| 17 | }; |
| 18 | |
| 19 | resetc: reset-controller { |
| 20 | compatible = "ralink,rt2880-reset"; |
| 21 | #reset-cells = <1>; |
| 22 | }; |
| 23 | |
| 24 | cpuintc: interrupt-controller { |
| 25 | #address-cells = <0>; |
| 26 | #interrupt-cells = <1>; |
| 27 | interrupt-controller; |
| 28 | compatible = "mti,cpu-interrupt-controller"; |
| 29 | }; |
| 30 | |
| 31 | palmbus@10000000 { |
| 32 | compatible = "palmbus", "simple-bus"; |
| 33 | reg = <0x10000000 0x200000>; |
| 34 | ranges = <0x0 0x10000000 0x1FFFFF>; |
| 35 | |
| 36 | #address-cells = <1>; |
| 37 | #size-cells = <1>; |
| 38 | |
| 39 | sysc: system-controller@0 { |
| 40 | compatible = "ralink,mt7620a-sysc", "syscon"; |
| 41 | reg = <0x0 0x100>; |
| 42 | }; |
| 43 | |
| Stefan Roese | 41f6e6e | 2018-08-16 15:27:32 +0200 | [diff] [blame^] | 44 | syscon-reboot { |
| 45 | compatible = "syscon-reboot"; |
| 46 | regmap = <&sysc>; |
| 47 | offset = <0x34>; |
| 48 | mask = <0x1>; |
| 49 | }; |
| 50 | |
| Stefan Roese | 4c835a6 | 2018-09-05 15:12:35 +0200 | [diff] [blame] | 51 | intc: interrupt-controller@200 { |
| 52 | compatible = "ralink,rt2880-intc"; |
| 53 | reg = <0x200 0x100>; |
| 54 | |
| 55 | interrupt-controller; |
| 56 | #interrupt-cells = <1>; |
| 57 | |
| 58 | resets = <&resetc 9>; |
| 59 | reset-names = "intc"; |
| 60 | |
| 61 | interrupt-parent = <&cpuintc>; |
| 62 | interrupts = <2>; |
| 63 | |
| 64 | ralink,intc-registers = <0x9c 0xa0 |
| 65 | 0x6c 0xa4 |
| 66 | 0x80 0x78>; |
| 67 | }; |
| 68 | |
| 69 | memory-controller@300 { |
| 70 | compatible = "ralink,mt7620a-memc"; |
| 71 | reg = <0x300 0x100>; |
| 72 | }; |
| 73 | |
| 74 | spi0: spi@b00 { |
| 75 | compatible = "ralink,mt7621-spi"; |
| 76 | reg = <0xb00 0x40>; |
| 77 | #address-cells = <1>; |
| 78 | #size-cells = <0>; |
| 79 | }; |
| 80 | |
| 81 | uart0: uartlite@c00 { |
| 82 | compatible = "ns16550a"; |
| 83 | reg = <0xc00 0x100>; |
| 84 | |
| 85 | resets = <&resetc 12>; |
| 86 | reset-names = "uart0"; |
| 87 | |
| 88 | interrupt-parent = <&intc>; |
| 89 | interrupts = <20>; |
| 90 | |
| 91 | reg-shift = <2>; |
| 92 | }; |
| 93 | |
| 94 | uart1: uart1@d00 { |
| 95 | compatible = "ns16550a"; |
| 96 | reg = <0xd00 0x100>; |
| 97 | |
| 98 | resets = <&resetc 19>; |
| 99 | reset-names = "uart1"; |
| 100 | |
| 101 | interrupt-parent = <&intc>; |
| 102 | interrupts = <21>; |
| 103 | |
| 104 | reg-shift = <2>; |
| 105 | }; |
| 106 | |
| 107 | uart2: uart2@e00 { |
| 108 | compatible = "ns16550a"; |
| 109 | reg = <0xe00 0x100>; |
| 110 | |
| 111 | resets = <&resetc 20>; |
| 112 | reset-names = "uart2"; |
| 113 | |
| 114 | interrupt-parent = <&intc>; |
| 115 | interrupts = <22>; |
| 116 | |
| 117 | reg-shift = <2>; |
| 118 | }; |
| 119 | }; |
| 120 | |
| 121 | usb_phy: usb-phy@10120000 { |
| 122 | compatible = "mediatek,mt7628-usbphy"; |
| 123 | reg = <0x10120000 0x1000>; |
| 124 | |
| 125 | #phy-cells = <0>; |
| 126 | |
| 127 | ralink,sysctl = <&sysc>; |
| 128 | resets = <&resetc 22 &resetc 25>; |
| 129 | reset-names = "host", "device"; |
| 130 | }; |
| 131 | |
| 132 | ehci@101c0000 { |
| 133 | compatible = "generic-ehci"; |
| 134 | reg = <0x101c0000 0x1000>; |
| 135 | |
| 136 | phys = <&usb_phy>; |
| 137 | phy-names = "usb"; |
| 138 | |
| 139 | interrupt-parent = <&intc>; |
| 140 | interrupts = <18>; |
| 141 | }; |
| 142 | }; |