- 096d7f5 arm64: dts: zynqmp: Fix node names which contain "_" by Michal Simek · 6 years ago
- 8e3501e arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string by Rob Herring · 6 years ago
- 32da535 arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up by Michal Simek · 4 years, 10 months ago
- 4ed9732 arm64: zynqmp: Add support for zcu1285 revA board by Michal Simek · 4 years, 10 months ago
- 8af4c4d net: zynq: Add a note about RX_BUF macro by Michal Simek · 5 years ago
- cecf7f4 arm64: zynqmp: Switch zcu100 revC to use firmware clock driver by Michal Simek · 4 years, 11 months ago
- 166fb46 zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodes by T Karthik Reddy · 5 years ago
- a81186f arm64: zynqmp: Add support for zcu208 by Michal Simek · 5 years ago
- 4cd8bf4 ARM: zynq: Add missing nand/smcc nodes by Michal Simek · 4 years, 11 months ago
- 3f9c239 firmware: Remove probe which is causing extra bind by Ashok Reddy Soma · 4 years, 11 months ago
- 268695d arm64: zynqmp: Correct the type of eeprom for zcu216 boards by Raviteja Narayanam · 5 years ago
- 50e45b7 arm64: zynqmp: Fix ina226 shunt resistor value by Michal Simek · 5 years ago
- 727b396 arm64: zynqmp: Move PANIC to Kconfig by Michal Simek · 5 years ago
- be1b6c3 arm64: zynqmp: Use zynqmp_virt platform by Michal Simek · 5 years ago
- dab3fa6 arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform by Michal Simek · 5 years ago
- 5b21d64 arm64: zynqmp: Add support for u-boot.itb generation with ATF by Michal Simek · 5 years ago
- 9c6bf17 test/py: hush_if_test: Add tests to cover octal/hex values by Michal Simek · 5 years ago
- 40128bb ARM: zynq: Remove unused QSPI and USB addresses by Michal Simek · 4 years, 11 months ago
- 2507ecf zynq: mtd: nand: Remove hardcoded base addresses by Ashok Reddy Soma · 5 years ago
- 45397a6 zynq: mtd: nand: Move zynq nand driver to driver model by Ashok Reddy Soma · 5 years ago
- c352f1e ARM: zynq: Add jtag distro boot support by T Karthik Reddy · 5 years ago
- 3b26c86 arm: zynqmp: Wire SPL/ATF handoff structure properly by Michal Simek · 5 years ago
- 5c03c99 spl: atf: Enable option to rewrite bl2_plat_get_bl31_params() by Michal Simek · 5 years ago
- 4d9b1af spi: Fix manual relocation calling more times by Ashok Reddy Soma · 5 years ago
- 312f2c5 arm: xilinx: Use device tree which can be passed on cmd line by Michal Simek · 5 years ago
- b4f8468 arm64: zynqmp: Fix return value of board_fit_config_name_match by Michal Simek · 5 years ago
- de79ca95 arm64: zynqmp: Add board_boot_order for MMC boot extension by Michal Simek · 5 years ago
- 594254e arm64: zynqmp: Fix symlinks to SC psu_init* files by Michal Simek · 5 years ago
- bc12dec arm64: zynqmp: Remove nand partition description from mini-nand by Michal Simek · 6 years ago
- 44e88ec arm64: zynqmp: Enable bind/unbind commands for all boards by Michal Simek · 5 years ago
- 47446a3 arm: zynq: Remove low level UART setting by Michal Simek · 5 years ago
- 84d2bbf arm64: zynqmp: Remove low level UART setting by Michal Simek · 5 years ago
- e82024d arm64: zynqmp: Do not assing MIO34 that early on zcu100 by Michal Simek · 5 years ago
- fc274a5 arm64: zynqmp: Add support for OF_SEPARATE with board DTB by Michal Simek · 5 years ago
- db5b253 arm64: zynqmp: Rename fw_dtb variable to fdt_blob by Michal Simek · 5 years ago
- f071cda arm64: Enable INIT_SP_RELATIVE by default when POC is enabled by Michal Simek · 5 years ago
- 724caab arm64: zynqmp: Do not call bss init and board_init_r from board_init_f by Michal Simek · 5 years ago
- 935568e spl: atf: Add missing ndepth initialization by Michal Simek · 5 years ago
- 53c69de board: xilinx: Add support for user configurable boot script offset by T Karthik Reddy · 5 years ago
- 18be60b arm64: zynqmp: Fix emmc boot mode boot_target sequence by T Karthik Reddy · 5 years ago
- 7c5b7bb arm64: versal: Fix emmc boot mode boot_target issue by T Karthik Reddy · 5 years ago
- 3dd0f8c mtd: nand: Remove hardcoded base address of nand by Ashok Reddy Soma · 5 years ago
- b014b83 mtd: nand: Move arasan nand driver to driver model by Ashok Reddy Soma · 5 years ago
- 88366b9 travis: Switch to QEMU v4.2.0 globally by Tom Rini · 4 years, 10 months ago
- 12183df gitlab/azure: Update to latest container by Tom Rini · 4 years, 10 months ago
- ef2f0d3 Merge branch '2020-01-10-master-imports' by Tom Rini · 4 years, 10 months ago
- 4f731c7 cmd: adtimg: Refactor usage style by Eugeniu Rosca · 5 years ago
- 4c6edc2 cmd: adtimg: Rename internal symbols by Eugeniu Rosca · 5 years ago
- b84acf1 dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg by Eugeniu Rosca · 5 years ago
- 27a38a6 virtio: fix typo devicd by Heinrich Schuchardt · 5 years ago
- 41acbc5 arm: cpu: armv8: add support for arm psci reset2. by Rajesh Ravi · 5 years ago
- 0bc4356 arch: arm: Program GIC LPI configuration table by Bharat Kumar Reddy Gooty · 5 years ago
- 5819466 mkimage: simplify fit_check_params() by Heinrich Schuchardt · 5 years ago
- 6478a7e cmd/eeprom.c: prepend 0x to hex numbers in output message format by Klaus H. Sorensen · 5 years ago
- 3f05f08 test/cmd_ut.c: fix cmd_ut_category by Philippe Reynes · 4 years, 10 months ago
- 53dc8ae gcc-9: silence 'address-of-packed-member' warning by Andy Shevchenko · 5 years ago
- 68af810 boards/km_arm: enable support for Macronix SPI NOR flash by Holger Brunck · 5 years ago
- e7fdb34 arm/km: remove board KMCOGE3UN by Holger Brunck · 5 years ago
- fd7c400 km/boards: add MAC address offset as argument to ivm_populate_env by Holger Brunck · 5 years ago
- 58e1fdb km/boards: fix typo for MAC address offset config option by Holger Brunck · 5 years ago
- 36b8b5d poweroff: add poweroff for mt6323 pmic by Frank Wunderlich · 5 years ago
- 0b326fc rtc: add support for DS3232 device by Han Nandor · 5 years ago
- c82abaa spl: fix stack usage check if gd is not initialized by Simon Goldschmidt · 5 years ago
- 8947145 m68k: Drop CONFIG_MCFPIT support by Tom Rini · 5 years ago
- ae3d38f bootcount: add a DM i2c eeprom backing store for bootcount by Robert Beckett · 5 years ago
- 48f885a drivers: mcfmii: add dm support by Angelo Durgehello · 5 years ago
- 05ffdc8 drivers: fsl_mcdmafec: conversion to dm by Angelo Durgehello · 5 years ago
- a7bcace drivers: mcffec: conversion to dm by Angelo Durgehello · 5 years ago
- 080bcc5 drivers: net: add mcf fec dm Kconfig support by Angelo Durgehello · 5 years ago
- ad42093 m68k: add dm fec support by Angelo Durgehello · 5 years ago
- ff56f2b configs: purge unneeded fec defines by Angelo Durgehello · 5 years ago
- 549c5cd configs: add eth dm support for all ColdFire boards by Angelo Durgehello · 5 years ago
- 0dac801 m68k: add fec fdt overrides to all boards by Angelo Durgehello · 5 years ago
- 04e5dd5 m68k: add fec base node to devicetrees by Angelo Durgehello · 5 years ago
- c00bd81 Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-mpc83xx by Tom Rini · 4 years, 10 months ago
- d6b92b9 Merge tag 'dm-pull-8jan20' of git://git.denx.de/u-boot-dm by Tom Rini · 4 years, 10 months ago
- a74a213 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 4 years, 10 months ago
- 7086de4 Merge tag 'efi-2020-04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 4 years, 10 months ago
- 21aede2 Merge tag 'uniphier-v2020.04' of https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier by Tom Rini · 4 years, 11 months ago
- deb287b Merge tag 'u-boot-imx-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 4 years, 11 months ago
- ce022f2 Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 4 years, 11 months ago
- 9af51fb Merge tag 'u-boot-amlogic-20200108' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 4 years, 11 months ago
- 3e99c18 Merge branch '2020-01-07-master-imports' by Tom Rini · 4 years, 11 months ago
- 7b1c1f9 uniphier_{v7, v8}_defconfig: enable SPI driver and sspi command by Masahiro Yamada · 4 years, 11 months ago
- 49a7282 ARM: dts: uniphier: add pinmux nodes for I2C ch5, ch6 by Masahiro Yamada · 4 years, 11 months ago
- 964b90f ata: fsl_sata: Continue probing other sata port when failed current port. by Peng Ma · 5 years ago
- 40cdf26 ata: sata_sil: Continue probing other sata port when failed current port. by Peng Ma · 5 years ago
- 74bb457 treewide: Remove CONFIG_SYS_UBOOT_START from configs board files by Patrice Chotard · 5 years ago
- 38a6cce Makefile: Fix CONFIG_SYS_UBOOT_START default value by Patrice Chotard · 5 years ago
- 14a2dee cmd/Kconfig: Add more dependencies to OSE bootm support by Tom Rini · 5 years ago
- 028c8c4 imx: imx8mn: enable CONFIG_CMD_ERASEENV by Peng Fan · 4 years, 11 months ago
- 213daa3 imx: imx8mn_evk: add board_mmc_get_env_dev by Peng Fan · 4 years, 11 months ago
- e6c4c9d imx8mn: evk: add README by Peng Fan · 4 years, 11 months ago
- 439321b imx: add i.MX8MP EVK board by Peng Fan · 4 years, 11 months ago
- 234187e imx: imx8m: add imximage-8mp-lpddr4.cfg by Peng Fan · 4 years, 11 months ago
- c4cc283 clk: imx: add i.MX8MP clk driver by Peng Fan · 4 years, 11 months ago
- 6ddde48 clk: imx: add imx_clk_mux2_flags by Peng Fan · 4 years, 11 months ago
- 19957ee imx: imx8m: only support non-dm code in clock_imx8mm.c by Peng Fan · 4 years, 11 months ago
- 9d5e1aa imx: Kconfig: make SPL_IMX_ROMAPI_LOADADDR visible to i.MX8MP by Peng Fan · 4 years, 11 months ago
- 20cd453 imx: add i.MX8MP PE property by Peng Fan · 4 years, 11 months ago