- 0ac03fb arm64: zynqmp: Add pinctrl emmc description to SM-K26 by Michal Simek · 2 years, 9 months ago
- e5d8d08 arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 by Michal Simek · 2 years, 9 months ago
- dbd673f pinctrl: zynqmp: Add pinctrl driver by Ashok Reddy Soma · 2 years, 10 months ago
- e19b8dd pinctrl: Increase length of pinmux status buffer by Ashok Reddy Soma · 2 years, 10 months ago
- 57d820d cmd: test: pinmux: Do not check all empty spaces by Michal Simek · 2 years, 9 months ago
- a744a28 net: phy: Add support for ethernet-phy-id with gpio reset by Michal Simek · 2 years, 10 months ago
- 3249116 net: phy: Remove static return type for phy_device_create() by Michal Simek · 2 years, 10 months ago
- db681d4 net: phy: Add new read ethernet phy id function by Michal Simek · 2 years, 10 months ago
- d24b3e3 MAINTAINERS: Remove duplicated entry for ehci-zynq.c by Michal Simek · 2 years, 9 months ago
- 9fb9ec5 arm64: zynqmp: add support for zcu106 rev1.0 by Neal Frager · 2 years, 9 months ago
- f76f860 i2c: i2c-cdns: Prevent early termination of write by Sai Pavan Boddu · 2 years, 9 months ago
- 94b3f3f i2c: i2c-cdns: Fix write transaction state by Sai Pavan Boddu · 2 years, 9 months ago
- 1bc2a79 i2c: i2c-cdns: Start read transaction after write to transfer_size reg by Sai Pavan Boddu · 2 years, 9 months ago
- d926695 dma: xilinx: Add Display Port DMA driver by Michal Simek · 2 years, 10 months ago
- 98cacab video: Add skeleton driver for ZynqMP Display port driver by Michal Simek · 2 years, 10 months ago
- 90ab7fa mmc: zynq_sdhci: Add support for dynamic configuration by Ashok Reddy Soma · 2 years, 10 months ago
- 3adc17f lib: div64: Add support for round up of div64_u64 by Ashok Reddy Soma · 2 years, 10 months ago
- 7d9ee46 firmware: zynqmp: Add support for set sd config and is function supported by Ashok Reddy Soma · 2 years, 10 months ago
- de5358a firmware: zynqmp: Add and update firmware enums by Ashok Reddy Soma · 2 years, 10 months ago
- 2f6e1dd arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards by Michal Simek · 2 years, 10 months ago
- 8b82a3a arm64: zynqmp: Enable DP driver for SOMs by Michal Simek · 2 years, 10 months ago
- ff79448 arm64: zynqmp: Switch to ethernet-phy-id in kv260 by Michal Simek · 2 years, 10 months ago
- a3efa53 arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM by Michal Simek · 2 years, 10 months ago
- 59e1bdd arm64: zynqmp: Setup clock for DP and DPDMA by Michal Simek · 2 years, 10 months ago
- c36dc24 arm64: zynqmp: Move usb hub from i2c to usb node by Michal Simek · 2 years, 10 months ago
- d7b5cc8 microblaze: Do not place u-boot to reserved memory location by Michal Simek · 2 years, 9 months ago
- fda7cbf power: zynqmp: Use zynqmp_pmufw_node() from firmware by Michal Simek · 2 years, 9 months ago
- 15efe0f gpio: slg7xl45106: Add support for slg7xl45106 i2c gpo expander by T Karthik Reddy · 2 years, 10 months ago
- 980e555 mmc: zynq_sdhci: Enable card detect workaround for ZynqMP by Ashok Reddy Soma · 2 years, 10 months ago
- 8d32bca mmc: zynq_sdhci: Change granularity of timeout to 1us by Ashok Reddy Soma · 2 years, 10 months ago
- c252b27 mmc: zynq_sdhci: Fix timeout issue by Ashok Reddy Soma · 2 years, 10 months ago
- 03a8e82 ARM: dts: zynq: add NAND flash controller node by Michael Walle · 2 years, 10 months ago
- c2b74ed mtd: nand: Update driver to match new DT binding by Michal Simek · 2 years, 10 months ago
- 4173a42 dm: pinctrl: Use explicit values for enums by Ashok Reddy Soma · 2 years, 10 months ago
- 2569b51 Revert "board: zynqmp: Fix for wrong AMS setting by ROM" by T Karthik Reddy · 2 years, 10 months ago
- 7a036b6 fru: ops: Add support to read mac addresses from multirecord by Ashok Reddy Soma · 2 years, 10 months ago
- ff8ee70 xilinx: common: Optimise updating ethaddr from eeprom by Ashok Reddy Soma · 2 years, 10 months ago
- 90e8f2d fru: ops: Return error from checksum if data is all zero's by Ashok Reddy Soma · 2 years, 10 months ago
- 952b2e6 fru: ops: Clear fru table before storing data by Ashok Reddy Soma · 2 years, 10 months ago
- 6d3c46e Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 9 months ago
- 0444cbb Merge branch '2022-03-04-assorted-minor-fixes' by Tom Rini · 2 years, 9 months ago
- 9b5ad4f lib: rsa: use actual OpenSSL 1.1.0 EVP MD API by Yann Droneaud · 2 years, 9 months ago
- 4fa4227 .mailmap: Record all address for main U-Boot contributor by Michal Simek · 2 years, 9 months ago
- 5017f9b mkimage: error handling for FIT image by Heinrich Schuchardt · 2 years, 9 months ago
- 55fd1c4 cmd: pwm: fix typo 'eisable' -> 'disable' by Sébastien Szymanski · 2 years, 9 months ago
- 39834cc arm: dts: iot2050: Add cfg register space for ringacc and udmap by Jan Kiszka · 2 years, 10 months ago
- 4403e1a configs: j721e_*_evm_a72_defconfig: Enable config for setting mmc speed mode by Aswath Govindraju · 2 years, 10 months ago
- f7fbe54 arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT by Christian Gmeiner · 2 years, 10 months ago
- 4ff9a8c configs: ti: use standard configuration nodes naming by Romain Naour · 2 years, 10 months ago
- 55b5c42 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 9 months ago
- f4fa962 tools: kwboot: Update references with public links by Pali Rohár · 2 years, 9 months ago
- 0b5909d tools: kwboot: Update doc about Avanta by Pali Rohár · 2 years, 9 months ago
- 787fcf5 tools: kwboot: Update manpage by Pali Rohár · 2 years, 9 months ago
- bdc4dba tools: kwboot: Update usage by Pali Rohár · 2 years, 9 months ago
- e8d26e8 tools: kwboot: Add support for backspace key in mini terminal by Pali Rohár · 2 years, 9 months ago
- 93976af tools: kwboot: Fix sending and processing debug message pattern (-d option) by Pali Rohár · 2 years, 9 months ago
- 913866a tools: kwboot: Use separate thread for sending boot message pattern by Pali Rohár · 2 years, 9 months ago
- c1d911f tools: kwboot: Cleanup bootmsg and debugmsg variables by Pali Rohár · 2 years, 9 months ago
- 132016e tools: kwboot: Remove msg_req_delay by Pali Rohár · 2 years, 9 months ago
- d8865f8 tools: kwboot: Check for return value of kwboot_tty_send() and tcflush() by Pali Rohár · 2 years, 9 months ago
- 0a6f029 ARM: mvebu: x530: clearfog: Add ODT configuration by Chris Packham · 2 years, 9 months ago
- 87724d5 arm64: a37xx: pinctrl: Fix PWM pins indexes by Marek Behún · 2 years, 9 months ago
- 2454de2 drivers: rtc: fix null pointer access in armada38x_rtc_reset by Francois Berder · 2 years, 9 months ago
- 1fd5425 arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again by Pali Rohár · 2 years, 10 months ago
- 7f59ed6 arm: mvebu: turris_omnia: Enable ext4 write support in defconfig by Marek Behún · 2 years, 10 months ago
- fc27e5d pci: pci_mvebu: Cleanup macro names by Pali Rohár · 2 years, 10 months ago
- 6828517 pci: pci_mvebu: Remove unused SELECT and lane_mask by Pali Rohár · 2 years, 10 months ago
- 7938b3b tools: kwboot: Fix quitting terminal by Pali Rohár · 2 years, 10 months ago
- d274f92 Merge tag 'u-boot-at91-fixes-2022.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 by Tom Rini · 2 years, 9 months ago
- 705b584 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 2 years, 9 months ago
- cfcf195 sunxi: f1c100s: Drop SYSRESET to enable reset functionality by Andre Przywara · 2 years, 9 months ago
- c21f3d4 sunxi: f1c100s: Fix FEL registers restore by Andre Przywara · 2 years, 9 months ago
- 640f2f3 mach-sunxi: Enable SPI boot for SUNIV and licheepi nano by Jesse Taube · 2 years, 10 months ago
- 0dcdaff mach-sunxi: Add SPL SPI boot for SUNIV by Jesse Taube · 2 years, 10 months ago
- a08b04b mach-sunxi: Add boot device detection for SUNIV/F1C100s by Jesse Taube · 2 years, 10 months ago
- f64aac4 Merge https://source.denx.de/u-boot/custodians/u-boot-usb by Tom Rini · 2 years, 9 months ago
- a41b88e phy: nop-phy: Fix phy reset if no reset-gpio defined by Tim Harvey · 2 years, 9 months ago
- f9a719e Prepare v2022.04-rc3 by Tom Rini · 2 years, 9 months ago
- 8df7e97 Merge branch '2022-02-28-bugfixes' by Tom Rini · 2 years, 9 months ago
- c2aed9c board: stemmy: Detect board variants and patch DTB by Linus Walleij · 2 years, 10 months ago
- 6fb4f73 arm: apple: Switch to fully dynamic mem layout by Janne Grunau · 2 years, 10 months ago
- 551f426 arm: pdu001: Setup pinmux for console UART as early as possible by Felix Brack · 2 years, 10 months ago
- 286f948 arm: pdu001: Fix early debugging UART by Felix Brack · 2 years, 10 months ago
- 11f29d4 tools: mkimage/dumpimage: Allow to use -l with -T by Pali Rohár · 2 years, 10 months ago
- 2058967 tools: pblimage: fix image header verification function by Hou Zhiqiang · 2 years, 10 months ago
- 453db60 lx2160a: Fix distroboot device list for configs without USB/SCSI/etc by Daniel Klauer · 2 years, 10 months ago
- 554a853 board: sl28: use fit image generator by Michael Walle · 2 years, 9 months ago
- 62ba0e5 board: sl28: disable random MAC address generation by Michael Walle · 2 years, 9 months ago
- 2810da7 board: sl28: remove "Useful I2C tricks" section from docs by Michael Walle · 3 years, 1 month ago
- 453d171 board: sl28: disable recovery watchdog by Michael Walle · 3 years, 1 month ago
- 2ba8a44 board: sl28: enable SoC watchdog support by Michael Walle · 3 years, 1 month ago
- 34502f7 board: sl28: enable sl28cpld support by Michael Walle · 3 years, 1 month ago
- d36b683 board: sl28: print CPLD version on bootup by Michael Walle · 3 years, 1 month ago
- fea5161 board: sl28: fix DRAM pretty print by Michael Walle · 3 years, 1 month ago
- 07d6cb9 gpio: add sl28cpld driver by Michael Walle · 2 years, 9 months ago
- f606c9a watchdog: add sl28cpld watchdog driver by Michael Walle · 3 years, 1 month ago
- 42595eb misc: add sl28cpld base driver by Michael Walle · 2 years, 9 months ago
- a900c7f Merge tag 'efi-2022-04-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 2 years, 9 months ago
- 7228ef9 Merge https://source.denx.de/u-boot/custodians/u-boot-sh by Tom Rini · 2 years, 9 months ago
- 3fa9ed9 efi_loader: update the timing of enabling and disabling EFI watchdog by Masahisa Kojima · 2 years, 10 months ago