1. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 9 years ago
  2. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 9 years ago
  3. e65d33c zynq: gem: Setting up WRAP bit for one TX bd by Michal Simek · 9 years ago
  4. eda9d30 zynq: gem: Increase the Rx buffer descriptors to 32 by Siva Durga Prasad Paladugu · 9 years ago
  5. 96f4f14 zynqmp: gem: Flush the rx buffers while transmitting by Siva Durga Prasad Paladugu · 10 years ago
  6. 8a584c8 zynqmp: gem: Set data bus width to 64bit for arm64 by Siva Durga Prasad Paladugu · 10 years ago
  7. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  8. 7f7409b sunxi: Enable both ehci and otg in host mode on various boards by Hans de Goede · 9 years ago
  9. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  10. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  11. 56a2085 sunxi: musb: Improve output during probing by Hans de Goede · 9 years ago
  12. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  13. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  14. 71cbe0d sunxi: musb: Add id pin support by Hans de Goede · 9 years ago
  15. b41972e sunxi: musb: Move vbus check to sunxi_musb_enable by Hans de Goede · 9 years ago
  16. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  17. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  18. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  19. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  20. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  21. 58d6d13 usb: ci_udc: fix request allocation when endpoints are disabled by Rob Herring · 9 years ago
  22. bf5b9b1 sunxi: spl: Remove redundant check from `board_mmc_init` for signature by Daniel Kochmański · 9 years ago
  23. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  24. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  25. 1b26bab mmc: Protect `mmc_initialize` from initialising mmc multiple times by Daniel Kochmański · 9 years ago
  26. 5a9749e arm: marvell: Increase MAXARGS to 32 by Stefan Roese · 9 years ago
  27. 7853c50 arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support by Stefan Roese · 9 years ago
  28. 4bfcc54 spl: spl_mmc: Add option to boot from a MMC partition with offset by Stefan Roese · 9 years ago
  29. 7ddf8cf kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS by Stefan Roese · 9 years ago
  30. 1bbe63c kwbimage: Add support for SDIO/MMC boot device selection by Stefan Roese · 9 years ago
  31. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  32. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  33. 62102be ARM: UniPhier: document reference support card by Masahiro Yamada · 9 years ago
  34. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  35. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  36. ad6670e ARM: UniPhier: update CONFIG_BOOTARGS by Masahiro Yamada · 9 years ago
  37. d259449 ARM: UniPhier: disable CONFIG_FIT by Masahiro Yamada · 9 years ago
  38. e037db0 ARM: UniPhier: add environment variable for TFTP boot by Masahiro Yamada · 9 years ago
  39. 421376a ARM: UniPhier: add environment sets for non-FIT Linux boot by Masahiro Yamada · 9 years ago
  40. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  41. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  42. 9e30b31 arm: mvebu: db-88f6820: Add SPL support with DDR init code by Stefan Roese · 10 years ago
  43. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  44. f1df936 arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr by Stefan Roese · 10 years ago
  45. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  46. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 9 years ago
  47. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 9 years ago
  48. c25012b Makefile: Fix mvebu build target to use SPL load and exe-address by Stefan Roese · 9 years ago
  49. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 9 years ago
  50. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 9 years ago
  51. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 9 years ago
  52. 85a9ea3 ci_udc: fix 64-bit compile warnings by Stephen Warren · 9 years ago
  53. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  54. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  55. 6b9f9ea linux_compat: handle __GFP_ZERO in kmalloc() by Masahiro Yamada · 9 years ago
  56. ebc3328 linux_compat: move vzalloc() to header file as an inline function by Masahiro Yamada · 9 years ago
  57. 3721eaf linux_compat: remove cpu_relax() define by Masahiro Yamada · 9 years ago
  58. 5f7e310 x86: delete unneeded declarations of disable_irq() and enable_irq() by Masahiro Yamada · 9 years ago
  59. 82b9143 usb: ehci-marvell: Drop wrl accessor function by Stefan Roese · 9 years ago
  60. a588d99 usb: CONFIG_USB_FASTBOOT prefix replacement for consistency by Paul Kocialkowski · 9 years ago
  61. d00bf78 implement Fastboot via USB OTG on bcm28155_ap boards by Jiandong Zheng · 9 years ago
  62. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  63. 05a950c g_dnl: add missing declaration by Steve Rae · 9 years ago
  64. bc9071c usb: gadget: fastboot: Dequeue the previous IN request for the current request by Paul Kocialkowski · 9 years ago
  65. 94b385f usb: gadget: fastboot: Request status and length check in rx handler by Paul Kocialkowski · 9 years ago
  66. eca76b7 fastboot: Dynamic controller index for usb_gadget_handle_interrupts by Paul Kocialkowski · 9 years ago
  67. 99fc222 usb: gadget: Weak board_usb_init/cleanup definitions in USB download gadget code by Paul Kocialkowski · 9 years ago
  68. 8d2f003 usb: board_usb_init and board_usb_cleanup calls in the fastboot command by Paul Kocialkowski · 9 years ago
  69. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  70. 01acd6a usb: USB download gadget and functions config options coherent naming by Paul Kocialkowski · 9 years ago
  71. f2226c0 drivers: usb: fsl: Remove LS102XA immap inclusion by Nikhil Badola · 9 years ago
  72. 2f47324 include: usb: Map USB controller base addresses for LS2085A by Nikhil Badola · 9 years ago
  73. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  74. 667f4dd drivers: usb: fsl: Implement Erratum A-009116 for XHCI controller by Nikhil Badola · 9 years ago
  75. 7e5a32f drivers: usb: fsl: Remove warnings for 64-bit architectures by Nikhil Badola · 9 years ago
  76. 081a1b7 ls1021aqds: Enable USB IP support by Ramneek Mehresh · 9 years ago
  77. 10a2864 ls1021atwr: Enable USB IP support by Ramneek Mehresh · 9 years ago
  78. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 9 years ago
  79. ba92ee0 usb: fsl: Add XHCI driver support by Ramneek Mehresh · 9 years ago
  80. 792651f usb: xhci: keystone: Remove common dwc3 drv functions calls by Ramneek Mehresh · 9 years ago
  81. 2770448 usb: xhci: omap: Remove common dwc3 drv functions calls by Ramneek Mehresh · 9 years ago
  82. 552d60c usb: xhci: exynos: Remove common dwc3 drv functions calls by Ramneek Mehresh · 9 years ago
  83. dc9cdf8 usb: dwc3: Add DWC3 controller driver support by Ramneek Mehresh · 9 years ago
  84. b86f795 net: Allow drivers to return -ENOSYS with the write_hwaddr() method by Simon Glass · 9 years ago
  85. fbc4b8a dm: usb: eth: Add driver-model support to the asix driver by Simon Glass · 9 years ago
  86. 2b53b07 dm: usb: Add driver-model support to ehci-pci by Simon Glass · 9 years ago
  87. 4a41cc1 x86: minnowmax: Drop the cache line size hack by Simon Glass · 9 years ago
  88. abb59cf dm: usb: Adjust the USB_DEVICE() macro naming by Simon Glass · 9 years ago
  89. c8c2797 dm: usb: eth: Support driver model with USB Ethernet by Simon Glass · 9 years ago
  90. a1ca92e dm: eth: Avoid blocking on packet reception by Simon Glass · 9 years ago
  91. 6955909 dm: usb: Avoid using USB ethernet with CONFIG_DM_USB and no DM_ETH by Simon Glass · 9 years ago
  92. b483915 dm: usb: Correct the struct usb_driver_entry comment by Simon Glass · 9 years ago
  93. 4b515e4 dm: pci: Add a function to get the BDF for a device by Simon Glass · 9 years ago
  94. d0a5a0b dm: eth: Add driver-model support to the rtl8169 driver by Simon Glass · 9 years ago
  95. aba9296 dm: pci: Add support for PCI driver matching by Simon Glass · 9 years ago
  96. e62b526 usb: Update some EHCI driver licenses to use SPDX by Simon Glass · 9 years ago
  97. 19df0bc usb: ehci: Correct a missing hypen in an error message by Simon Glass · 9 years ago
  98. 36d7cc1 dm: core: Add \n to two dm_warn() messages by Simon Glass · 9 years ago
  99. 09e7ea4 musb: Add device-model support to the musb-host u-boot glue by Hans de Goede · 9 years ago
  100. fc85d39 musb: Add musb_host_data struct to hold global data by Hans de Goede · 9 years ago