- 0bfc701 dts: dra7-ipu-common-early-boot.dtsi: Add all the ipu early boot related nodes by Keerthy · 2 years, 10 months ago
- fc6b41f remoteproc: ipu: Add driver to bring up ipu by Keerthy · 2 years, 10 months ago
- a03df89 remoteproc: uclass: Add remoteproc resource handling helpers by Keerthy · 2 years, 10 months ago
- 8a92603 linux: bitmap.h: Add find_next_zero_area function by Keerthy · 2 years, 10 months ago
- b071a07 drivers: misc: Makefile: Enable fs_loader compilation at SPL Level by Keerthy · 2 years, 10 months ago
- 0197909 arm: mach-omap2: load/start remoteproc IPU1/IPU2 by Keerthy · 2 years, 10 months ago
- 795b2c4 reset: dra7: Add a reset driver by Keerthy · 2 years, 10 months ago
- c55d6c6 configs: dra7xx_evm: Increase the size of SPL_MULTI_DTB_FIT by Amjad Ouled-Ameur · 2 years, 10 months ago
- 708f54f soc: soc_ti_k3: update j721e revision numbering by Bryan Brattlof · 2 years, 10 months ago
- 8886341 configs: j721s2_evm_a72_defconfig: Add A72 specific defconfig by David Huang · 2 years, 10 months ago
- 1b1dcac configs: j721s2_evm_r5_defconfig: Add R5 SPL specific defconfig by David Huang · 2 years, 10 months ago
- 81fb00b arm: dts: k3-j721s2-ddr: Add DDR support by Aswath Govindraju · 2 years, 10 months ago
- 626a2fd arm: dts: k3-j721s2: Add r5 specific dt support by Aswath Govindraju · 2 years, 10 months ago
- a9d8cf2 arm: dts: Add support for A72 specific J721S2 Common Processor Board by Aswath Govindraju · 2 years, 10 months ago
- 05d441a arm: dts: Add initial support for J721S2 System on Module by Aswath Govindraju · 2 years, 10 months ago
- 2bab70e arm: dts: Add initial support for J721S2 SoC by Aswath Govindraju · 2 years, 10 months ago
- 55e1d74 dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721S2 by Aswath Govindraju · 2 years, 10 months ago
- 4f260bb dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC by Aswath Govindraju · 2 years, 10 months ago
- 5d9fadf board: ti: j721s2: Add board support for J721S2 by David Huang · 2 years, 10 months ago
- f993adb soc: ti: k3-socinfo: Add entry for J721S2 SoC by David Huang · 2 years, 10 months ago
- 8fdb1c7 ram: k3-ddrss: Add support for J721S2 SoC by David Huang · 2 years, 10 months ago
- 98551f8 power: domain: ti: Add support for J721S2 SoC by David Huang · 2 years, 10 months ago
- 55bdc20 clk: clk-k3: Add support for J721S2 SoC by David Huang · 2 years, 10 months ago
- e00b1ac drivers: dma: Add support for J721S2 by David Huang · 2 years, 10 months ago
- 681023a arm: K3: Add basic support for J721S2 SoC definition by David Huang · 2 years, 10 months ago
- a48fc5c ram: k3-ddrss: Add support for configuring MSMC subsystem in case of Multiple DDR subsystems by Aswath Govindraju · 2 years, 10 months ago
- 1a99bec ram: k3-ddrss: Add support for multiple instances of DDR subsystems by Aswath Govindraju · 2 years, 10 months ago
- 3e3d836 ram: k3-ddrss: lpddr4_structs_if.h: Add a pointer to ddr instance by Aswath Govindraju · 2 years, 10 months ago
- 473bd5a remoteproc: k3_system_controller: Support optional boot_notification channel by Nishanth Menon · 2 years, 10 months ago
- 8b139f4 Merge tag 'u-boot-imx-20220207' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 2 years, 10 months ago
- 530780a apalis/colibri_imx6: move setting bootcmd to defconfig by Oleksandr Suvorov · 2 years, 10 months ago
- 2bc2f81 board: toradex: add verdin imx8m plus support by Marcel Ziswiler · 2 years, 10 months ago
- b5c5b9a Merge tag 'efi-2022-04-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 2 years, 10 months ago
- 6bbe12f tools: mkeficapsule: dont use malloc.h by Heinrich Schuchardt · 2 years, 10 months ago
- e2bceb0 efi: Drop unnecessary calls to blk_find_device() by Simon Glass · 2 years, 10 months ago
- 377d39d efi: Use device_get_uclass_id() where appropriate by Simon Glass · 2 years, 10 months ago
- d837cb1 efi: Add debugging to efi_set_bootdev() by Simon Glass · 2 years, 10 months ago
- 3c95b32 efi_loader: add handle for UART by Heinrich Schuchardt · 2 years, 10 months ago
- 915623c efi_loader: fix text output for Uart() DP nodes by Heinrich Schuchardt · 2 years, 10 months ago
- b1193fa efi_loader: use %zu to print efi_uintn_t in FMP driver by Heinrich Schuchardt · 2 years, 10 months ago
- e9df549 efi_loader: use %zu not %zd to print efi_uintn_t by Heinrich Schuchardt · 2 years, 10 months ago
- 344f26a efi_loader: fix device path to text protocol by Heinrich Schuchardt · 2 years, 10 months ago
- c672dd7 test: test UTF-16 truncation in snprintf() by Heinrich Schuchardt · 2 years, 10 months ago
- fe14f88 lib: fix snprintf() for UTF-16 strings by Heinrich Schuchardt · 2 years, 10 months ago
- b9b4cec efi_selftest: merge FDT and RISC-V tests by Heinrich Schuchardt · 2 years, 10 months ago
- 8efefce efi_selftest: unit test for RISCV_EFI_BOOT_PROTOCOL by Sunil V L · 2 years, 10 months ago
- de44d80 configs: disable UEFI for Colibri VF610 by Heinrich Schuchardt · 2 years, 10 months ago
- 2b8e304 ARM: imx6: dh-imx6: Add update_sf script to install U-Boot into SF by Marek Vasut · 3 years ago
- 16c7369 board: kontron: pitx-imx8m: Add Kontron pitx-imx8m board support by Heiko Thiery · 2 years, 10 months ago
- be63dc7 mach-imx: iomux-v3: add a define for the SION bit by Angus Ainslie · 2 years, 10 months ago
- 881c8a6 arm: dts: imx8mq kernel dts updates by Angus Ainslie · 2 years, 10 months ago
- 0c9c5d2 mx6: crm_regs: drop BM_ANADIG_ANA_MISC0_REFTOP_VBGADJ by Dario Binacchi · 2 years, 10 months ago
- c1af358 imx: mx6ull: fix REFTOP_VBGADJ setting by Dario Binacchi · 2 years, 10 months ago
- 04638fa configs/*imxrt10*: remove [SPL_]CLK_COMPOSITE_CCF by Heiko Thiery · 2 years, 10 months ago
- bfbdf9e clk: imx: select [SPL_]CLK_COMPOSITE_CCF for imxrt10{20|50} by Heiko Thiery · 2 years, 10 months ago
- 0e0ae73 arm64: dts: imx8mm: Add the pcie support by Richard Zhu · 2 years, 10 months ago
- f1cc436 arm64: dts: imx8mm: Add the pcie phy support by Richard Zhu · 2 years, 10 months ago
- 10a99f0 dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy by Richard Zhu · 2 years, 10 months ago
- 3d14bd2 imx: imx8mn_beacon: Remove redundant code by Adam Ford · 2 years, 10 months ago
- 586cb71 imx: imx8mm_beacon: Remove redundant code by Adam Ford · 2 years, 10 months ago
- 8f55003 imx: imx8qm_rm7720: adjust fdt_addr by Oliver Graute · 2 years, 10 months ago
- a7e22ec imx: imx8qm_rom7720: Increase CONFIG_SYS_BOOTM_LEN to 64MB by Oliver Graute · 2 years, 10 months ago
- 2c7ebf7 imx: imx8mn_beacon: Fix USB booting by Adam Ford · 2 years, 10 months ago
- 6c3373b arm: dts: add imx8mp-rsb3720-a1 dts file by Ying-Chun Liu (PaulLiu) · 2 years, 10 months ago
- dd4b3ca arm64: dts: imx8mm: Add missing MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B by Marek Vasut · 2 years, 10 months ago
- 9aac5c3 arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0 by Oliver Stäbler · 2 years, 10 months ago
- 2c9d2ac ARM: imx: imx8m: Add PLL 1.4 GHz, 1.5 GHz, 1.6 GHz, 1.8 GHz options by Marek Vasut · 2 years, 10 months ago
- 66e90be ARM: imx: imx8m: Align PLL 1.2 GHz option with Linux by Marek Vasut · 2 years, 10 months ago
- 1b7f00e regulator: bd718x7: Bypass bogus warnings by Marek Vasut · 2 years, 10 months ago
- 1289ff7 imx8m: lock id_swap_bypass bit in tzc380 enable by Andrey Zhizhikin · 2 years, 10 months ago
- 3113861 imx: imx8mn_beacon: Enable TrustZone by Adam Ford · 2 years, 10 months ago
- 2f95456 imx: imx8mm_beacon: Enable USB by Adam Ford · 2 years, 10 months ago
- d81c6a9 arm: dts: imx8mm-beacon: Resync dtsi with Kernel 5.17-rc1 by Adam Ford · 2 years, 10 months ago
- 9376d79 smegw01: Update DDR initialization by Fabio Estevam · 2 years, 10 months ago
- 94588ff imx8mn-ddr4-evk: generate single bootable image by Andrey Zhizhikin · 2 years, 10 months ago
- 8c34cdc imx: ventana: correct splashimage load address by Andrey Zhizhikin · 2 years, 10 months ago
- efaf9a2 imx8mq_evk: configs: add/cleanup variables for distro boot by Andrey Zhizhikin · 2 years, 10 months ago
- ea4e938 arm64: dts: imx8mq-u-boot.dtsi: improve odd blob-ext naming by Patrick Wildt · 2 years, 10 months ago
- 49f5565 arm64: dts: imx8mm-u-boot.dtsi: use dash for node names by Patrick Wildt · 2 years, 10 months ago
- 553216f arm64: dts: imx8mq-u-boot.dtsi: explicitly add spl filename by Patrick Wildt · 2 years, 10 months ago
- 440c7d1 arm64: dts: imx8mq-u-boot.dtsi: alphabetically re-order properties by Patrick Wildt · 2 years, 10 months ago
- 23b1d8e doc: verdin-imx8mm: Remove ATF_LOAD_ADDR export by Fabio Estevam · 2 years, 11 months ago
- 59c3b71 doc: sl-mx8mm: Remove ATF_LOAD_ADDR export by Fabio Estevam · 2 years, 11 months ago
- 9482a60 doc: imx8mm_evk: Remove ATF_LOAD_ADDR export by Fabio Estevam · 2 years, 11 months ago
- 1bcda4e imx: imx8mm: imx8mm-kontron-n801x-s: add common board u-boot.dtsi by Heiko Thiery · 2 years, 11 months ago
- b72b171 imx: imx8mm: imx8mm-kontron-n801x-s: convert options to Kconfig by Heiko Thiery · 2 years, 11 months ago
- 18956cd cmd: bcb: fix bcb struct alignment issue by Gary Bisson · 2 years, 11 months ago
- f8a5cda configs: imx8mm-cl-iot-gate: update dfu_alt_info for single flash.bin by Ying-Chun Liu (PaulLiu) · 2 years, 11 months ago
- 02737ac cmd_nandbcb: Support secondary boot address of imx8mn by Michael Trimarchi · 2 years, 11 months ago
- 0be742d imx: Enable ACTLR.SMP in SPL for i.MX6/7 by Sven Schwermer · 2 years, 11 months ago
- 0c5cc16 Makefile: imx: Do not call arch/arm/mach-imx flash.bin generation if BINMAN enabled by Marek Vasut · 2 years, 11 months ago
- 8ed378f ARM: dts: imx: Synchronize iMX6QDL DHCOM PDK2 DTs with Linux 5.15.12 by Marek Vasut · 2 years, 11 months ago
- 2ab0b52 ARM: dts: imx: Add labels to remaining anatop regulators by Marek Vasut · 2 years, 11 months ago
- e2a63608 arm: dts: Enable support for USB on XEA (imx28) board by Lukasz Majewski · 2 years, 11 months ago
- 95966a5 arm: xea: config: Provide special defconfig for a single binary u-boot by Lukasz Majewski · 2 years, 11 months ago
- 1e7212e xea: dts: Update the SPI-NOR flash memory partitions description by Lukasz Majewski · 2 years, 11 months ago
- 8bba895 arm: xea: Modify board code to generate single binary u-boot by Lukasz Majewski · 2 years, 11 months ago
- 014315b spl: Provide more space to be used for storing SPL on imx28 OCRAM by Lukasz Majewski · 3 years ago
- e195550 ARM: dts: imx6ull: Use the correct name for ESAI_TX0 by Fabio Estevam · 3 years ago
- 12f9b4d mx6: Use imx6_src_get_boot_mode() to check boot device by Harald Seiler · 3 years ago