- 10bca13 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb by Tom Rini · 4 years, 6 months ago
- 1e6d9f5 Merge tag 'u-boot-amlogic-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic by Tom Rini · 4 years, 6 months ago
- 648856a usb: dwc3: Add versal compatibility string to dwc3 glue ids by Siva Durga Prasad Paladugu · 4 years, 6 months ago
- 73ca014 usb: dwc3: add dis_del_phy_power_chg_quirk by Jagan Teki · 4 years, 6 months ago
- 2a38d22 Prepare v2020.07-rc2 by Tom Rini · 4 years, 6 months ago
- ac14bc4 Merge tag 'efi-2020-07-rc2-4' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi by Tom Rini · 4 years, 6 months ago
- bb488ac Merge tag 'ti-v2020.07-rc2' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti by Tom Rini · 4 years, 6 months ago
- 1bccb23 Merge tag 'u-boot-imx-20200511' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 4 years, 6 months ago
- 9bf87e2 test: dm: update test for open-drain/open-source emulation in gpio-uclass by Neil Armstrong · 4 years, 6 months ago
- 47bd533 gpio: emulate open drain & open source in dm_gpio_set_value() by Neil Armstrong · 4 years, 6 months ago
- 951db64 Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spi by Tom Rini · 4 years, 6 months ago
- 375d79c odroid-c2: enable USB host controller by Beniamino Galvani · 5 years ago
- 42e0570 Nokia RX-51: Update README.nokia_rx51 by Pali Rohár · 4 years, 8 months ago
- 5973f90 Nokia RX-51: Disable some unused features to decrease size of u-boot binary by Pali Rohár · 4 years, 8 months ago
- 07693cc Nokia RX-51: Enable CONFIG_CONSOLE_MUX by Pali Rohár · 4 years, 8 months ago
- b5f7cf5 Nokia RX-51: Remember setup_console_atag option by Pali Rohár · 4 years, 8 months ago
- f5cfdbf Nokia RX-51: Remove PART* macros by Pali Rohár · 4 years, 8 months ago
- c3cc829 Nokia RX-51: Revert back onenand defitions by Pali Rohár · 4 years, 8 months ago
- fca7abf Nokia RX-51: Move code from defconfig back to C header file by Pali Rohár · 4 years, 8 months ago
- 778907d Nokia RX-51: Move comment about CONFIG_SYS_TEXT_BASE to correct place by Pali Rohár · 4 years, 8 months ago
- 7d0e773 Nokia RX-51: Add README.nokia_rx51 file to MAINTAINERS by Pali Rohár · 4 years, 8 months ago
- 5308665 Nokia RX-51: Update my email address by Pali Rohár · 4 years, 8 months ago
- 295ab88 video: omap: change include order by Dario Binacchi · 4 years, 6 months ago
- b76bea1 arm: K3: Increase default SYSFW image size allocation by Andrew F. Davis · 4 years, 7 months ago
- 8af1caa sf: Add Macronix MX25R6435F SPI NOR flash to flash parameters array by Ye Li · 4 years, 6 months ago
- 1fbfe58 spi: fix dev parameter in dev_* calls by Dario Binacchi · 4 years, 7 months ago
- 28029c7 spi: nxp-fspi: Use new readl_poll_sleep_timeout API by Kuldeep Singh · 4 years, 7 months ago
- ce786ae iopoll: Add readl_poll_sleep_timeout by Jagan Teki · 4 years, 7 months ago
- c094e21 iopoll: Add dealy to read poll by Jagan Teki · 4 years, 7 months ago
- 5423247 iopoll: Add read_poll_timeout common API by Jagan Teki · 4 years, 7 months ago
- d7c5661 clk: Fix clk func names in comments by Jagan Teki · 4 years, 7 months ago
- 5a2b677 phy: Use _nodev naming convention if non-device clients by Jagan Teki · 4 years, 7 months ago
- cd3e01b phy: Fix node description of phy_get_by_node by Jagan Teki · 4 years, 7 months ago
- d0847ec spi: Zap lpc32xx_ssp driver-related code by Jagan Teki · 4 years, 7 months ago
- d52a03b imx8: cpu: check resource owned after sid fail by Peng Fan · 4 years, 6 months ago
- a6c36f1 imx: imx8qxp: update fdt_file according to m4 state by Peng Fan · 4 years, 6 months ago
- e825d30 imx: imx8qm: update fdt_file according to m4 state by Peng Fan · 4 years, 6 months ago
- ed5b253 imx: imx8qm/qxp: check whether m4 partition booted by Peng Fan · 4 years, 6 months ago
- 42b26dd imx8: Select boot device dynamically by Ye Li · 4 years, 6 months ago
- 6aead23 imx: imx8qm/qxp: Recover SPL data section for partition reboot by Peng Fan · 4 years, 6 months ago
- 231401d imx: imx8qm/imx8qxp: Power down the resources before SPL jump to u-boot by Peng Fan · 4 years, 6 months ago
- 8103767 imx: imx8qm/qxp: add get_board_serial by Peng Fan · 4 years, 6 months ago
- 7c351ff imx: imx8qm/qxp: Fix issue in get_effective_memsize by Ye Li · 4 years, 6 months ago
- f44afd5 imx: imx8qm/qxp: reserving DDR memory for M4 by Peng Fan · 4 years, 6 months ago
- bf9382a mtd: nand: raw: mxs_nand changes for nandbcb by Han Xu · 4 years, 6 months ago
- f797fe8 nandbcb: read boot search count from fuse for imx8qxp by Han Xu · 4 years, 6 months ago
- 214b7d5 cmd: nandbcb: Reconstruct the nandbcb tool for all platforms by Han Xu · 4 years, 6 months ago
- 49f8454 nandbcb: add nandbcb dump command for i.MX6 by Alice Guo · 4 years, 6 months ago
- 0b10337 nandbcb: add nandbcb dump command for i.MX8MM by Alice Guo · 4 years, 6 months ago
- 66dbd9c nandbcb: support i.MX8M by Alice Guo · 4 years, 6 months ago
- c6ed350 nandbcb: fix the issue cannot support gf_14 NAND boot by Han Xu · 4 years, 6 months ago
- 6fcb2ee imx8: Replace SC_R_LAST with SC_R_NONE in DTB by Leonard Crestez · 4 years, 6 months ago
- 1074af5 power: imx8: Check owned resource in power on by Ye Li · 4 years, 6 months ago
- e8f8b5c power: imx8: remove the resource owned check before power off by Peng Fan · 4 years, 6 months ago
- ca0c527 power: imx8-power-domain: Set DM_FLAG_DEFAULT_PD_CTRL_OFF flag by Ye Li · 4 years, 6 months ago
- 8c0a1c6 imx8: power: Add PD device lookup interface to power domain uclass by Peng Fan · 4 years, 6 months ago
- e640571 dt-bindings: imx_rsrc: add SC_R_NONE by Peng Fan · 4 years, 6 months ago
- f36f8bc imx: Add support for i.MX8MM Beacon EmbeddedWorks devkit. by Adam Ford · 4 years, 6 months ago
- fe04bcd nand: enable the Randomizer module for i.mx7 and i.mx8 by Alice Guo · 4 years, 6 months ago
- f7bb012 mxs_nand: don't check zero count when ECC reading with randomizer by Han Xu · 4 years, 6 months ago
- a596912 MXS_NAND: Add clock support for iMX8 by Ye Li · 4 years, 6 months ago
- 39320e7 mtd: nand: support GPMI NAND driver for i.MX8 by Peng Fan · 4 years, 6 months ago
- f290fe0 nand: mxs_nand: make imx8mm can use hardware BCH and randomizer by Alice Guo · 4 years, 6 months ago
- 17282f4 mtd: mxs_nand: fix the gf_13/14 definition issue by Han Xu · 4 years, 6 months ago
- 9fdb5f0 mtd: nand: mxs_nand: add i.MX6QP compatible string by Han Xu · 4 years, 6 months ago
- e551ee2 mxs_nand: Update compatible string for i.MX6SX by Ye Li · 4 years, 6 months ago
- b209635 nand: Update SPL MXS NAND mini driver by Ye Li · 4 years, 6 months ago
- ff99041 mxs_nand: Add support for i.MX8M by Ye Li · 4 years, 6 months ago
- 29f40c0 nand: mxs: correct bitflip for erased NAND page by Peng Fan · 4 years, 6 months ago
- 552c882 nand: mxs: fix the bitflips for erased page when uncorrectable error by Peng Fan · 4 years, 6 months ago
- 51cdf83 mtd: gpmi: provide the option to use legacy bch geometry by Ye Li · 4 years, 6 months ago
- 616f03d mtd: gpmi: change the BCH layout setting for large oob NAND by Ye Li · 4 years, 6 months ago
- 77ed80c misc: scu: Increase the timeout for MU communication by Ye Li · 4 years, 6 months ago
- e5e95ec misc: fuse: Update imx8 fuse driver for 8QM by Ye Li · 4 years, 6 months ago
- dc597d1 imx: cpu: support tmu by Peng Fan · 4 years, 6 months ago
- ef56281 imx: regs: add more fuse bank structure by Peng Fan · 4 years, 6 months ago
- 3462b55 imx8mp: Set default SNSR25C for TMU probe1 by Ye Li · 4 years, 6 months ago
- ebb9aab imx: load calibration parameters from fuse for i.MX8MP by Ye Li · 4 years, 6 months ago
- 94c693d imx: i.MX8MN: Enable loading TASR and TCALIV from fuse by Ye Li · 4 years, 6 months ago
- 70487ff imx8mm: Load fuse for TMU TCALIV and TASR by Ye Li · 4 years, 6 months ago
- 634fe73 thermal: imx_tmu: support i.MX8MP by Peng Fan · 4 years, 6 months ago
- 951bf19 thermal: imx_tmu: Check the TEMP range for iMX8MM by Peng Fan · 4 years, 6 months ago
- b5447b9 thermal: imx_tmu: Fix for temperature out of range by Peng Fan · 4 years, 6 months ago
- 8489740 thermal: imx_tmu: support TMU arch level initialization by Peng Fan · 4 years, 6 months ago
- fc8657b thermal: imx_tmu: Add support for thermal sensor on iMX8MM by Peng Fan · 4 years, 6 months ago
- 2cd7f47 thermal: Add thermal driver for i.MX8M by Peng Fan · 4 years, 6 months ago
- 6039d66 thermal: imx_scu_thermal: Update driver for i.MX8QM thermal sensor by Ye Li · 4 years, 6 months ago
- 580fab4 eQos: Implement the read_rom_hwaddr callback by Ye Li · 4 years, 6 months ago
- 9d4194f fec: Move imx_get_mac_from_fuse declare to imx file by Ye Li · 4 years, 6 months ago
- 0e9d239 net: eqos: implement callbaks to get interface and set txclk rate by Fugang Duan · 4 years, 6 months ago
- 3a97da1 net: dwc_eth_qos: add dwc eqos for imx support by Fugang Duan · 4 years, 6 months ago
- e32e4d0 net: phy: realtek: add rx delay support for RTL8211F by Fugang Duan · 4 years, 6 months ago
- 6a895d0 net: Update eQos driver and FEC driver to use eth phy interfaces by Ye Li · 4 years, 6 months ago
- 5fe419e net: Add eth phy generic driver for shared MDIO by Ye Li · 4 years, 6 months ago
- d2b7020 net: eth-uclass: add return value check by Peng Fan · 4 years, 6 months ago
- a6979f7 pinctrl: nxp: scu: Check the pad partition before set pinmux by Ye Li · 4 years, 6 months ago
- d19c1cb imx8mq_phanbell: Run SPL with caches enabled by Fabio Estevam · 4 years, 7 months ago
- 3b26d52 net: fec: add fuse check by Peng Fan · 4 years, 7 months ago
- 0bd3d91 usb: mx6: add fuse check by Peng Fan · 4 years, 7 months ago
- 7d1ee74 i2c: mxc: add fuse check by Peng Fan · 4 years, 7 months ago