1. 1166119 ARM: fix ifdefs in ARMv8 lowlevel_init() by Stephen Warren · 9 years ago
  2. 1cc0a9f Fix various typos, scattered over the code. by Robert P. J. Day · 9 years ago
  3. d9b6f58 ARM: tegra: enable GPU node by compatible value by Stephen Warren · 9 years ago
  4. 09c2b8f Change my mailaddress by Andreas Bießmann · 9 years ago
  5. f1ab00f arch/arm/imx-common/Makefile: Update u-boot.uim MKIMAGEFLAGS by Tom Rini · 9 years ago
  6. b525556 Revert "rockchip: rk3288: correct sdram setting" by Vagrant Cascadian · 9 years ago
  7. 9a1f4ba Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  8. 821c89d Revert "omap3: Use raw SPL by default for mmc1" by Tom Rini · 9 years ago
  9. bef4b02 ARM: uniphier: move pin-mux code into pin_init function by Masahiro Yamada · 9 years ago
  10. 5eb4150 ARM: uniphier: allow to use System Bus for ROM boot mode of PH1-LD20 by Masahiro Yamada · 9 years ago
  11. 1dce5eb ARM: uniphier: enable Peripherl clock to use UART in SPL by Masahiro Yamada · 9 years ago
  12. 6834096 ARM: uniphier: fix boot mode table of PH1-LD20 by Masahiro Yamada · 9 years ago
  13. bfb33f0 sunxi: mctl_mem_matches: Add missing memory barrier by Hans de Goede · 9 years ago
  14. e52e334 ARM: DRA7: Add ABB setup for all domains by Nishanth Menon · 9 years ago
  15. a818097 ARM: OMAP5: Enable ABB configuration for MM voltage domain by Nishanth Menon · 9 years ago
  16. 3708e78 ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structure by Nishanth Menon · 9 years ago
  17. 2d9d057 ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2 by Nishanth Menon · 9 years ago
  18. 7e4902d ARM: hisilicon: hikey: dts: Add pl011 additional clock binding. by Peter Griffin · 9 years ago
  19. cd593ed ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board. by Peter Griffin · 9 years ago
  20. 9122109 ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3. by Peter Griffin · 9 years ago
  21. 89cb2b5 configs: Re-sync with cmd/Kconfig by Tom Rini · 9 years ago
  22. 78d1e1d configs: Re-sync almost all of cmd/Kconfig by Tom Rini · 9 years ago
  23. 9f69ab8 Merge branch 'master' of git://www.denx.de/git/u-boot-uniphier by Tom Rini · 9 years ago
  24. 588d269 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  25. 3d97087 ARM: dts: uniphier: add SD controller node for PH1-LD20 by Masahiro Yamada · 9 years ago
  26. 9d0c2ce ARM: uniphier: add PH1-LD20 SoC support by Masahiro Yamada · 9 years ago
  27. 881aa5a ARM: uniphier: rework uniphier_set_fdt_file() by Masahiro Yamada · 9 years ago
  28. d90b974 ARM: uniphier: carry on booting for Unknown boot mode by Masahiro Yamada · 9 years ago
  29. 612ccd9 ARM: uniphier: add sg_set_iectrl_range() by Masahiro Yamada · 9 years ago
  30. 6c64d50 ARM: dts: uniphier: move aliases node up to satisfy fdtgrep by Masahiro Yamada · 9 years ago
  31. 1222add ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref board by Masahiro Yamada · 9 years ago
  32. 7b3a032 ARM: uniphier: avoid unaligned access to DT on 64bit SoC by Masahiro Yamada · 9 years ago
  33. ec3ab3f Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 9 years ago
  34. 43809cf arm: socfpga: socrates: Add eth0 alias to enable ethernet by Stefan Roese · 9 years ago
  35. 84f841c arm: socfpga: Fix typos in DT files (environmnet -> environment) by Stefan Roese · 9 years ago
  36. 69cc7db Add initial support for Technexion's PICO-IMX6UL-EMMC board by Fabio Estevam · 9 years ago
  37. 9999fc0 MX6UL: Add definition for UART6 base address by Fabio Estevam · 9 years ago
  38. 90d7cc4 imx: mx6: Fix procedure to switch the parent of LDB_DI_CLK by Akshay Bhat · 9 years ago
  39. 0297bd1 arm: mx5: Fix NAND image generation by Marek Vasut · 9 years ago
  40. 724219a ARM: always perform per-CPU GIC init by Stephen Warren · 9 years ago
  41. bd716dd ARM: AM43xx: Fix BOOT_DEVICE_USB ID by Lokesh Vutla · 9 years ago
  42. e361421 ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs by Mugunthan V N · 9 years ago
  43. 103afa2 ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs by Mugunthan V N · 9 years ago
  44. 541c9be Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  45. f17abca gpio: zynq: Move the definitions to driver file by Siva Durga Prasad Paladugu · 9 years ago
  46. de77a03 gpio: zynq: Remove non driver model code by Siva Durga Prasad Paladugu · 9 years ago
  47. 2978ae2 gpio: Kconfig: Enable Zynq GPIO driver using kconfig by Siva Durga Prasad Paladugu · 9 years ago
  48. 6c0c958 ARM64: zynqmp: Add support for zc1751 with DC cards by Michal Simek · 9 years ago
  49. 1f4f3d3 ARM64: zynqmp: Add support for ZCU102 platform by Michal Simek · 9 years ago
  50. 885581a ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards by Michal Simek · 9 years ago
  51. 4521202 ARM64: zynqmp: Add missing nand node for ep108 by Punnaiah Choudary Kalluri · 9 years ago
  52. ac8f691 ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts by Anurag Kumar Vulisha · 9 years ago
  53. 85d1142 ARM64: zynqmp: Use 64bit size cell format for memory node by Michal Simek · 9 years ago
  54. a84de48 ARM64: zynqmp: Fix DWC3 binding with the kernel by Michal Simek · 9 years ago
  55. 786db82 ARM64: zynqmp: Add serdes address space dp driver by Michal Simek · 9 years ago
  56. c588d15 ARM64: zynqmp: Align register description by Michal Simek · 9 years ago
  57. 939cfea ARM64: zynqmp: dp: Add default properties to zynqmp.dtsi by Hyun Kwon · 9 years ago
  58. 695d75a ARM64: zynqmp: Use correct addresses in node names by Hyun Kwon · 9 years ago
  59. 4e31d27 ARM64: zynqmp: Align node address with parent node for dpdma by Michal Simek · 9 years ago
  60. ca2f587 ARM64: zynqmp: Add backward compatible string for uart by Michal Simek · 9 years ago
  61. 91a8b0e ARM64: zynqmp: Fix coding style for pcie by Michal Simek · 9 years ago
  62. 33aec51 ARM64: zynqmp: Extend pcie node to support legacy interrupts by Bharat Kumar Gogada · 9 years ago
  63. 7c38ca3 ARM64: zynqmp: Add interrupt-controller property to gpio nodes by Michal Simek · 9 years ago
  64. 9086900 ARM64: zynqmp: Add ddrc node in dts by Naga Sureshkumar Relli · 9 years ago
  65. b34d11d ARM64: zynqmp: Added clocks to DT by VNSL Durga · 9 years ago
  66. ff50d21 ARM64: zynqmp: Add CCI-400 node by Michal Simek · 9 years ago
  67. 14cd9ea ARM64: zynqmp: Add missing interrupt-parent to PMU node by Michal Simek · 9 years ago
  68. 8f4e397 ARM64: zynqmp: DT: Add power domains by Soren Brinkmann · 9 years ago
  69. bd750e7 ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes by P L Sai Krishna · 9 years ago
  70. da2ad78 ARM64: zynqmp: Sync GEM nodes with Linux by Michal Simek · 9 years ago
  71. 7f1d7d9 ARM64: zynqmp: Hook up the GEMs to the SMMU by Edgar E. Iglesias · 9 years ago
  72. 88a85aa ARM64: zynqmp: Correct IRQ nr for the SMMU by Edgar E. Iglesias · 9 years ago
  73. b8bf553 ARM64: zynqmp: Add 8-bit bus width property. by P L Sai Krishna · 9 years ago
  74. eaae2b5 ARM64: zynqmp: dt: Change qspi node compatible string by Ranjit Waghmode · 9 years ago
  75. beaf795 ARM64: zynqmp: Add missing mmc aliases by Michal Simek · 9 years ago
  76. 02e782c ARM64: zynqmp: Use C pre-processor for includes in dts by Alistair Francis · 9 years ago
  77. a195ed3 ARM: zynq: Fix usb phy node for Zybo by Michal Simek · 9 years ago
  78. 371fc58 ARM: zynq: Extend microzed board support by Michal Simek · 9 years ago
  79. 74720dc ARM: zynq: Add missing qspi for xm013 by Michal Simek · 9 years ago
  80. b347c14 ARM: zynq: Create empty line below headers by Michal Simek · 9 years ago
  81. a95d54b ARM: zynq: Align spi and qspi node locations by Michal Simek · 9 years ago
  82. ac2c407 ARM: zynq: zc706: Add adv7511 on i2c bus by Christian Kohn · 9 years ago
  83. 169050e ARM: zynq: zc702: Add adv7511 on i2c bus by Christian Kohn · 9 years ago
  84. c9132b1 ARM: zynq: DT: Add ethernet phy reset information by Punnaiah Choudary Kalluri · 9 years ago
  85. 936bbc5 ARM: zynq: Fix bootargs in board dtsi by Michal Simek · 9 years ago
  86. 77bb73d ARM: zynq: Align devcfg node by Michal Simek · 9 years ago
  87. 20fe3f1 ARM: dts: Updated devicetree bindings for Zynq 7000 platform by Moritz Fischer · 9 years ago
  88. 4c98727 ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. by Moritz Fischer · 9 years ago
  89. 58fab4c ARM: zynq: Add interrupt-controller property to gpio nodes by Michal Simek · 9 years ago
  90. 8140132 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  91. 39fbd98 Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 9 years ago
  92. d9cb860 arm: mvebu: Add base address for 2nd I2C controller by Stefan Roese · 9 years ago
  93. ec770db sunxi: Add defconfig and dts file for Orange Pi One SBC by Hans de Goede · 9 years ago
  94. 88bb800 sunxi: Enable CMD_GPIO on all sunxi boards by Hans de Goede · 9 years ago
  95. b24f7f0 sunxi: Enable usb ports on the Sinovoip BPI M3 by Hans de Goede · 9 years ago
  96. 2c3c3ec sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option by Hans de Goede · 9 years ago
  97. df12014 arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code by Hans de Goede · 9 years ago
  98. c09d290 arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code by Hans de Goede · 9 years ago
  99. 7f961c9 am33xx changed BOOT_DEVICE_SPI to correct value by Vogt, Christof · 9 years ago
  100. fe84ebf rpi: remove redundant board files by Stephen Warren · 9 years ago