Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 1a3619cf825fcef15ebe0fac6d65a9af1bc0588c / include / configs
  1. 3349ed3 Remove references to CONFIG_CMD_EXT3, no such command by Robert P. J. Day · 9 years ago
  2. 093685a dragonboard410c: Fix environment variables by Andreas Färber · 9 years ago
  3. c1f2057 configs: ks2: move CMD_NAND to defconfigs by Lokesh Vutla · 9 years ago
  4. 8f69523 memory: Move TI_AEMIF config to KCONFIG by Lokesh Vutla · 9 years ago
  5. 50c5d43 dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE by Mateusz Kulikowski · 9 years ago
  6. 23922e2 cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT by Michal Simek · 9 years ago
  7. 5375389 kconfig: Move CONFIG_OF_LIBFDT to Kconfig by Michal Simek · 9 years ago
  8. 30b0195 bcm281xx: save ENV to MMC by Steve Rae · 9 years ago
  9. 108f841 ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE by Stephen Warren · 9 years ago
  10. 4ecad8a exynos: Set CNTFRQ by Alexander Graf · 9 years ago
  11. 541c9be Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  12. 58ed7f6 ARM64: zynqmp: Use i2c cadence DM driver by Michal Simek · 9 years ago
  13. ff9bd8e ARM64: zynqmp: Enable pca953x driver for zcu102 by Michal Simek · 9 years ago
  14. 2978ae2 gpio: Kconfig: Enable Zynq GPIO driver using kconfig by Siva Durga Prasad Paladugu · 9 years ago
  15. 08afaf1 ARM64: zynqmp: Clean header after moving stuff to Kconfig by Michal Simek · 9 years ago
  16. 6c0c958 ARM64: zynqmp: Add support for zc1751 with DC cards by Michal Simek · 9 years ago
  17. 1f4f3d3 ARM64: zynqmp: Add support for ZCU102 platform by Michal Simek · 9 years ago
  18. 407b76f ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file by Siva Durga Prasad Paladugu · 9 years ago
  19. 1e8d383 ARM: zynq: Do not perform reset at the end of thor by Michal Simek · 9 years ago
  20. 758f29d ARM: zynq: Support systems with more memory banks by Michal Simek · 9 years ago
  21. c1584e2 ARM: zynq: Use memory initialization based on DTS file by Michal Simek · 9 years ago
  22. 371fc58 ARM: zynq: Extend microzed board support by Michal Simek · 9 years ago
  23. 8140132 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  24. 169a855 arm: mvebu: theadorable: Add PEX-switch detection and reset code by Stefan Roese · 9 years ago
  25. 8ac71da arm: mvebu: theadorable: Enable 2nd I2C controller by Stefan Roese · 9 years ago
  26. 28226b9 arm: mvebu: theadorable: Add bootcounter support by Stefan Roese · 9 years ago
  27. fe84ebf rpi: remove redundant board files by Stephen Warren · 9 years ago
  28. d22a765 ARM: add Raspberry Pi 3 64-bit config by Stephen Warren · 9 years ago
  29. 9dbdc6e Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 9 years ago
  30. 7e8f270 Merge branch 'master' of git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  31. f6060ce arm: socfpga: Drop space after 'loadaddr=' in extra env by Marek Vasut · 9 years ago
  32. 723a72af arm: socfpga: migration of CONFIG_SPI_FLASH_BAR by Denis Bakhvalov · 9 years ago
  33. ac7eef7 board: pic32mzda: enable USB-host, USB-storage support. by Purna Chandra Mandal · 9 years ago
  34. e16e137 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 9 years ago
  35. b39d121 powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE by York Sun · 9 years ago
  36. 4c1ceb6 powerpc: t1040qds: Use generic ethsw commands by Codrin Ciubotariu · 9 years ago
  37. 3c1d218 armv8: LS2080A: Consolidate LS2080A and LS2085A by York Sun · 9 years ago
  38. 2a55583 armv8: ls1043a: load Fman ucode from SD/MMC under SD boot by Qianyu Gong · 9 years ago
  39. fd1b147 armv8: ls1043a: load Fman ucode from NAND flash under NAND boot by Qianyu Gong · 9 years ago
  40. 1b245d9 armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 by Wenbin Song · 9 years ago
  41. 4ed6ed3 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  42. 07654ba ARM64: zynqmp: Enable EFI partition support by Michal Simek · 9 years ago
  43. 4d1ed9c ARM: zynq: Add uEnv.txt support by Michal Simek · 9 years ago
  44. 679b994 block: Add support for Ceva sata by Michal Simek · 9 years ago
  45. 8d59d7f ARM64: zynqmp: Read RAM information from DT by Michal Simek · 9 years ago
  46. a3afb4a ARM64: Move HUSH enabling from board file to defconfig by Michal Simek · 9 years ago
  47. 46f68e6 ARM64: zynqmp: Enable FAT write and EXT4 write for USB too by Michal Simek · 9 years ago
  48. 5cfd918 ARM64: zynqmp: Decrease boot delay by Soren Brinkmann · 9 years ago
  49. a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
  50. 996503e ARM: zynq: zybo: Enabling reading MAC address from EEPROM by Michal Simek · 9 years ago
  51. b7b3efe ARM: zynq: Enable option to overwrite default variables by Michal Simek · 9 years ago
  52. 217185b zynq-common: Enable phy driver for Xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  53. 606576d arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 by Stefan Roese · 9 years ago
  54. 6baa261 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file by Fabio Estevam · 9 years ago
  55. 01f512b warp7: Pass the UART base definition by Fabio Estevam · 9 years ago
  56. a473122 arm: mxs: Update MX28EVK config by Marek Vasut · 9 years ago
  57. 626f048 board: Add Qualcomm Dragonboard 410C support by Mateusz Kulikowski · 9 years ago
  58. 5493a32 Migrate CONFIG_ULPI* to Kconfig by Mateusz Kulikowski · 9 years ago
  59. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago
  60. 44b0cf4 kc1: Add some sysboot and devicetree-related environment variables by Paul Kocialkowski · 9 years ago
  61. f5fdc37 kc1: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  62. 5fcbca5 sniper: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  63. 27ce696 configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time by Vitaly Andrianov · 9 years ago
  64. f031f50 rpi: BCM2837 and Raspberry Pi 3 32-bit support by Stephen Warren · 9 years ago
  65. adb91ec ARM: bcm2835: move CONFIG_BCM283* to Kconfig by Stephen Warren · 9 years ago
  66. 40345e9 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  67. d96ebc4 sunxi: Add support for Allwinner A64 SoCs by Siarhei Siamashka · 9 years ago
  68. 7f5b1e9 ARM: uniphier: remove CONFIG_ARP_TIMEOUT define by Masahiro Yamada · 9 years ago
  69. 15826e7 ARM: uniphier: drop unneeded defines related to legacy serial driver by Masahiro Yamada · 9 years ago
  70. 61a4f5b ARM: uniphier: add sramupdate command by Masahiro Yamada · 9 years ago
  71. 86c3345 ARM: uniphier: make u-boot-with-spl.bin really available by Masahiro Yamada · 9 years ago
  72. 0c935ac sunxi: usb_phy: Add support for A83T USB PHYs by Chen-Yu Tsai · 9 years ago
  73. 0badc64 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  74. ed2530d armv8/ls2080ardb: Enable VID support by Rai Harninder · 9 years ago
  75. fcfdb6d armv8: ls2080rdb: ls2080qds: Add secure boot support by Saksham Jain · 9 years ago
  76. f9e8a98 zipitz2: enable caches by Vasily Khoruzhick · 9 years ago
  77. 9cfc059 pxa: add support for D- and I- caches by Vasily Khoruzhick · 9 years ago
  78. afed7eb zipitz2: enable USB host support by Vasily Khoruzhick · 9 years ago
  79. 634890b pxa-common: pxa27x has 3 OHCI ports by Vasily Khoruzhick · 9 years ago
  80. fa89b53 zipitz2: enable libfdt by Vasily Khoruzhick · 9 years ago
  81. 59fa089 zipitz2: enable LCD rotation by Vasily Khoruzhick · 9 years ago
  82. f19eb15 zipitz2: restore board support by Vasily Khoruzhick · 9 years ago
  83. ed7481c ARM: bcm283x: don't always define CONFIG_BCM2835 by Stephen Warren · 9 years ago
  84. ccd9d51 RPi: Enable caches for rpi2 by Alexander Graf · 9 years ago
  85. adcc90b stm32f746-disco: enable flash support by Vikas Manocha · 9 years ago
  86. 9ecb0c4 stm32: stm32f4: move flash driver to mtd driver location by Vikas Manocha · 9 years ago
  87. a7f480d arm: mx6: Add CCV xPress board support by Stefan Roese · 9 years ago
  88. 4717348 warp7: Add initial support by Fabio Estevam · 9 years ago
  89. 227c59a mx7_common: Put early/late init configs into board file by Fabio Estevam · 9 years ago
  90. f9d0fd8 usb: gadget: Move CONFIG_USB_GADGET to Kconfig by Sam Protsenko · 9 years ago
  91. a616420 Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 9 years ago
  92. 8fb9eea mx6sabre_common: Fix U-Boot corruption after 'saveenv' by Fabio Estevam · 9 years ago
  93. 08cb448 arm: mx5: Enable NAND TrimFFS on M53EVK by Marek Vasut · 9 years ago
  94. ad6767b armv8/ls1043a: Update env settings for booting kernel by Qianyu Gong · 9 years ago
  95. aea02ab arm: mvebu: theadorable: Add StratixV FPGA programming support by Stefan Roese · 9 years ago
  96. 371b9e9 ARM: sheevaplug: correct nand partition layout by Peter Korsgaard · 9 years ago
  97. b5b84be Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  98. 1eae8f6 sunxi: Enable realtek phy support by Hans de Goede · 9 years ago
  99. d085ecd ARM: uniphier: switch to raw U-Boot image by Masahiro Yamada · 9 years ago
  100. cbbc2d8 ARM: uniphier: add NOR boot support by Masahiro Yamada · 9 years ago