- 16d88f4 Enable XAUI interface for B4860QDS by Suresh Gupta · 12 years ago
- 94025b1 powerpc/p5040: enable PBL tool support by Shaohui Xie · 12 years ago
- 3d2972f powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h by York Sun · 12 years ago
- c79fd50 T4240/ramboot: enable PBL tool for T4240 by Shaohui Xie · 12 years ago
- fb651b1 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx by Tom Rini · 12 years ago
- d6ed322 Power: remove support for Freescale MPC8220 by Wolfgang Denk · 12 years ago
- 04bccc3 T4240/net: use QSGMII card PHY address by default by Shaohui Xie · 12 years ago
- 9592780 t4240qds/eth: fixup ethernet for t4240qds by Shengzhou Liu · 12 years ago
- 10d644b powerpc: Add T4160QDS by York Sun · 12 years ago
- b46b7f9 powerpc/t4240qds: Move SoC define into boards.cfg by York Sun · 12 years ago
- 97c7fe6 powerpc/t4240qds: Add voltage ID support by York Sun · 12 years ago
- 4e5c926 powerpc/t4240qds: fix XAUI card PHY address by Shaohui Xie · 12 years ago
- 7ff8c7c powerpc/t4240qds: Fix SPI flash type by Shaohui Xie · 12 years ago
- 805fa87 Merge branch 'master' of git://git.denx.de/u-boot-blackfin into powerpc-eldk53-warning-fixes by Tom Rini · 12 years ago
- 04dbf77 x86: config: Enable LZO for coreboot, remove zlib, gzip by Simon Glass · 12 years ago
- 2e65959 x86: Enable bootstage for coreboot by Simon Glass · 12 years ago
- d0b6f24 x86: Re-enable PCAT timer 2 for beeping by Simon Glass · 12 years ago
- e761ecd x86: Add TSC timer by Simon Glass · 12 years ago
- da34aae bfin: Move gpio support for bf54x and bf60x into the generic driver folder. by Sonic Zhang · 12 years ago
- 9d803fc blackfin: Move blackfin serial driver out of blackfin arch folder. by Sonic Zhang · 12 years ago
- e9a389a blackfin: Move blackfin watchdog driver out of the blackfin arch folder. by Sonic Zhang · 12 years ago
- 50aadcc blackfin: Enable early print via the generic serial API. by Sonic Zhang · 12 years ago
- 955020c blackfin: Fit u-boot image size into limited nor flash on blackfin. by Sonic Zhang · 12 years ago
- 7d861d9 blackfin: bf609: add softswitch config command by Bob Liu · 12 years ago
- f4d8038 blackfin: run core1 from L1 code sram start address in uboot init code on core 0 by Sonic Zhang · 12 years ago
- e0ae433 blackfin: reduce size of u-boot.ldr in bf548-ezkit default config. by Bob Liu · 12 years ago
- 4e779ad gpio: Add support for microblaze xilinx GPIO by Michal Simek · 12 years ago
- 5ed6f44 P1022DS: Set CONFIG_SPL_MAX_SIZE directly by Tom Rini · 12 years ago
- 3fe0128 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 12 years ago
- 9e18685 powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boards by Shaohui Xie · 12 years ago
- f45210d powerpc/p1022ds: Add support for NAND and NAND boot using SPL by Matthew McClintock · 12 years ago
- e3288e1 Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx by Tom Rini · 12 years ago
- 8aa3449 mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes by Stefan Roese · 12 years ago
- 704afcc mpc5200: a3m071/a4m2k: Fix problem with increased global_data struct by Stefan Roese · 12 years ago
- f894551 mpc5200: a3m071/a4m2k: Enable flash verify option by Stefan Roese · 12 years ago
- 63216de omap5_uevm: Enable redundant MMC environment by Tom Rini · 12 years ago
- da85c9c mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND by Tom Rini · 12 years ago
- b0dac5b tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT by Andreas Bießmann · 12 years ago
- b157315 mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT by Andreas Bießmann · 12 years ago
- 3f9315c amcc-common.h: enable support for "env grep", "setexpr", and regex. by Wolfgang Denk · 12 years ago
- c88840a amcc-common.h: minor white space cleanup by Wolfgang Denk · 12 years ago
- ee747a2 m28evk: enable "env grep" and regexp support by Wolfgang Denk · 12 years ago
- 5f71bca m28evk: white space cleanup by Wolfgang Denk · 12 years ago
- 971020c sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT by Simon Glass · 12 years ago
- f828bf2 sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file by Simon Glass · 12 years ago
- a733b06 sandbox: Switch over to generic board by Simon Glass · 12 years ago
- 92daa4d Merge branch 'microblaze' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 12 years ago
- 0f21f98 watchdog: Add support for Xilinx Microblaze watchdog by Michal Simek · 12 years ago
- 7837645 microblaze: Enable netconsole by Michal Simek · 14 years ago
- f47b048 ppc4xx: Add lcd4_lwmon5 support by Stefan Roese · 12 years ago
- 17dcbfb Merge branch 'master' of git://git.denx.de/u-boot-arm into HEAD by Tom Rini · 12 years ago
- 70656c7 Exynos5: Add support for USB download boot mode by Vivek Gautam · 12 years ago
- 617c246 x86: config: Init PCI before SPI by Simon Glass · 12 years ago
- 6017954 Tegra: T30: Beaver board support. by Tom Warren · 12 years ago
- 85434f9 Tegra: TEC: Enable boot script support by Thierry Reding · 12 years ago
- 51016ff Tegra: Plutux: Enable NAND and boot script support by Thierry Reding · 12 years ago
- 9dc9caf Tegra: Medcom-Wide: Enable NAND and boot script support by Thierry Reding · 12 years ago
- 3efff99 Tegra: enable verify support for the crc32 command by Tom Warren · 12 years ago
- 17059f9 Merge branch 'master' of git://git.denx.de/u-boot-arm by Tom Rini · 12 years ago
- eac579d smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- b7b5f1a da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- e749789 cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT by Albert ARIBAUD · 12 years ago
- 6ebc346 ARM: fix CONFIG_SPL_MAX_SIZE semantics by Albert ARIBAUD · 12 years ago
- 8dc16cf Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 66300ac mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments by Otavio Salvador · 12 years ago
- 0c669fd Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- c1af608 exynos: Enable I2C TPM for smdk5250 by Simon Glass · 12 years ago
- 5e7ffaa integrator: enable device tree by Linus Walleij · 12 years ago
- b930a3e VCMA9: Enable CONFIG_CMD_NAND_YAFFS by Tom Rini · 12 years ago
- 1812201 Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 46afd3e omap5_common.h: Switch to ext4 by Tom Rini · 12 years ago
- 90639fe arm/km: add support for kmsuv31 board by Holger Brunck · 12 years ago
- dfeafde arm/km: use CONFIG_NAND_ECC_BCH by Holger Brunck · 12 years ago
- 45bd01e arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT by Holger Brunck · 12 years ago
- c97b6df Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
- 60442b3 mx31pdk: Remove watchdog support by Fabio Estevam · 12 years ago
- 52587f1 arm: Remove support for smdk6400 by Benoît Thébaudeau · 12 years ago
- da962b7 nand: mxc: Switch NAND SPL to generic SPL by Benoît Thébaudeau · 12 years ago
- 6113d3f Makefile: Change CONFIG_SPL_PAD_TO to image offset by Benoît Thébaudeau · 12 years ago
- 68fbc0e imx: mx53ard: Add support for NAND Flash by Benoît Thébaudeau · 12 years ago
- eef6da0 omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ by Jon Hunter · 12 years ago
- 54ef1f6 omap5912-osk: Increase flash partition for u-boot by Jon Hunter · 12 years ago
- 2a309f3 omap5912-osk: Fix device initialisation by Jon Hunter · 12 years ago
- a519602 omap5_uevm: Correct to 2MiB aligned partitions on eMMC by Tom Rini · 12 years ago
- ef4e9fc am335x_evm: Enable DFU for NAND and MMC, provide example alt_infos by Pantelis Antoniou · 12 years ago
- af5666c am335x_evm: Add CONFIG_CMD_MTDPARTS and relevant defaults by Tom Rini · 12 years ago
- 559eae1 am335x_evm: Define CONFIG_SYS_CACHELINE_SIZE by Pantelis Antoniou · 12 years ago
- dd2445e omap5_common.h: Use fallback CONFIG_SYS_BAUDRATE_TABLE by Tom Rini · 12 years ago
- 9552ee3 omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h by Tom Rini · 12 years ago
- aaed0a2 ARM: OMAP4/5: Make bootz as the default boot command by SRICHARAN R · 12 years ago
- 143070d ARM: OMAP4/5: Change the default boot command to work with device tree by SRICHARAN R · 12 years ago
- 78fd004 omap5: Allow use of a plain text env file by Nishanth Menon · 12 years ago
- d3501ed ARM: OMAP5: Set fdt_high to enable booting with Device tree by SRICHARAN R · 12 years ago
- 2c2a9f3 ARM: OMAP5: Rename omap5_evm to omap5_uevm by SRICHARAN R · 12 years ago
- d1da76e omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ by Hunter, Jon · 12 years ago
- faad9c0 omap2420-h4: Add device tree support by Hunter, Jon · 12 years ago
- 47f58a7 omap2420-h4: Fix booting from NOR flash by Hunter, Jon · 12 years ago
- 616cf60 tricorder: enable hw assisted BCH8 in SPL and u-boot by Andreas Bießmann · 12 years ago
- fd2aeac omap3_beagle: Flush UART3 xmit on enable if TEMT is broken by Manfred Huber · 12 years ago
- 4de602f musb: am335x: disable bulk split-combine feature by Bin Liu · 12 years ago