Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 26473945ad6667183296e7edee2a65edf31bb6f7 / arch
  1. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  2. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  3. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  4. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  5. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  6. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  7. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  8. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  9. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  10. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  11. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  12. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  13. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  14. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  15. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  16. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  17. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  18. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  19. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  20. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  21. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 10 years ago
  22. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 10 years ago
  23. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 10 years ago
  24. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 10 years ago
  25. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 10 years ago
  26. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  27. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  28. 5f7e310 x86: delete unneeded declarations of disable_irq() and enable_irq() by Masahiro Yamada · 9 years ago
  29. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  30. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  31. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  32. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 9 years ago
  33. 0503e82 dm: test: Add a size to each reg property by Simon Glass · 9 years ago
  34. 04035fd dm: test: Add a test for the system controller uclass by Simon Glass · 9 years ago
  35. 3c43fba dm: test: Add a test for the LED uclass by Simon Glass · 9 years ago
  36. 8e6cc46 dm: test: Add a test for the mmc uclass by Simon Glass · 9 years ago
  37. 64ce0ca dm: test: Add a test for the ram uclass by Simon Glass · 9 years ago
  38. 5010d98 sandbox: Use the reset driver to handle reset by Simon Glass · 9 years ago
  39. dc6f4d3 sandbox: Support multiple reset types by Simon Glass · 9 years ago
  40. 6a1c7ce dm: test: Add tests for the clk uclass by Simon Glass · 9 years ago
  41. 30db918 zynq: Rename struct clk_ops to zynq_clk_ops by Simon Glass · 9 years ago
  42. 4eae498 dm: arm: Put driver model I2C drivers before legacy ones by Simon Glass · 9 years ago
  43. fa78e0a dm: Reduce SPL device tree size by Simon Glass · 9 years ago
  44. db14f11 armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. by Zhichun Hua · 9 years ago
  45. 21a257b armv8: Fix TCR macros for shareability attribute by Zhichun Hua · 9 years ago
  46. e71a980 armv8/ls2085aqds: DSPI pin muxing configure through QIXIS by Haikun Wang · 9 years ago
  47. b0e209d armv8/ls2085a: Enable DSPI get input clk form 'mxc_get_clock' by Haikun Wang · 9 years ago
  48. 193e7e5 arm/dts/ls2085a: Add dts files for LS2085AQDS and LS2085ARDB by Haikun Wang · 9 years ago
  49. fe69a0e arm/dts/ls2085a: Add DSPI dts node by Haikun Wang · 9 years ago
  50. d941f71 arm/dts/ls2085a: Bring in ls2085a dts files from linux kernel by Haikun Wang · 9 years ago
  51. 88c857d arm/ls102xa: Add little-endian mode support for audio IPs by Alison Wang · 9 years ago
  52. 340848b arm/ls102xa: Add PSCI support for ls102xa by Wang Dongsheng · 9 years ago
  53. 972af2a ARMv7: Factor out reusable timer_wait from sunxi/psci_sun7i.S by Wang Dongsheng · 9 years ago
  54. 49a5e42 arm: ls1021a: Remove the inappropriate use of the function 'sprintf' by Alison Wang · 10 years ago
  55. 70e52d2 armv8/fsl-lsch3: device tree fixups for PCI stream IDs by Stuart Yoder · 9 years ago
  56. 39da644 armv8/fsl-lsch3: partition stream IDs by Stuart Yoder · 9 years ago
  57. f299b5b arm/errata: Update required bits for A57 cores erratas by Bhupesh Sharma · 9 years ago
  58. 092da48 armv8/ls2085a: Update SoC README for DDR layout by Prabhakar Kushwaha · 9 years ago
  59. 2262966 armv8/fsl-ch3: Add support to print SoC personality by Prabhakar Kushwaha · 9 years ago
  60. d4c711f armv8/fsl-lsch3: Fix DDR speed message by York Sun · 9 years ago
  61. 5be3b44 armv8/ls2085a: call ft_pcie_setup() to change dts status by Prabhakar Kushwaha · 9 years ago
  62. 605e15d Merge git://git.denx.de/u-boot-x86 by Tom Rini · 9 years ago
  63. b9da508 dm: x86: baytrail: Correct PCI region 3 when driver model is used by Simon Glass · 9 years ago
  64. b71f9dc dm: x86: minnowmax: Move PCI to use driver model by Simon Glass · 9 years ago
  65. 945cae7 x86: pci: Tidy up the generic x86 PCI driver by Simon Glass · 9 years ago
  66. a452002 x86: Configure VESA parameters before loading Linux kernel by Bin Meng · 9 years ago
  67. 9e3a7c9 x86: Remove MARK_GRAPHICS_MEM_WRCOMB by Bin Meng · 9 years ago
  68. 786a08e x86: Move VGA option rom macros to Kconfig by Bin Meng · 9 years ago
  69. df07d91 x86: cmd_mtrr: Improve MTRR list information by Bin Meng · 9 years ago
  70. 92587b3 x86: queensbay: Change CPU_ADDR_BITS to 32 by Bin Meng · 9 years ago
  71. 43dd22f x86: Setup fixed range MTRRs for legacy regions by Bin Meng · 9 years ago
  72. 1441d81 x86: bios: Allow pci config read/write to host bridge in int1a_handler by Jian Luo · 9 years ago
  73. 7b5c349 x86: bios: Synchronize stack between real and protected mode by Jian Luo · 9 years ago
  74. cdb6bab x86: queensbay: Change PCIe root ports' interrupt routing by Bin Meng · 9 years ago
  75. 07545d8 x86: Generate a valid MultiProcessor (MP) table by Bin Meng · 9 years ago
  76. 7f5df8d x86: Add MultiProcessor (MP) table APIs by Bin Meng · 9 years ago
  77. a2d73fd x86: Remove inline for lapic access routines by Bin Meng · 9 years ago
  78. 3d23287 x86: Add I/O APIC register access routines by Bin Meng · 9 years ago
  79. ba9091f x86: Clean up ioapic header file by Bin Meng · 9 years ago
  80. df81749 x86: Reduce PIRQ routing table size by Bin Meng · 9 years ago
  81. 8c38e4d x86: Ignore function number when writing PIRQ routing table by Bin Meng · 9 years ago
  82. 9c23543 x86: Write correct bus number for the irq router by Bin Meng · 9 years ago
  83. d402f92 x86: queensbay: Correct Topcliff device irqs by Bin Meng · 9 years ago
  84. b0014b6 x86: crownbay: Enable DM RTC support by Bin Meng · 9 years ago
  85. 990acd0 x86: crownbay: Add MP initialization by Bin Meng · 9 years ago
  86. 63d54a6 x86: Clean up lapic codes by Bin Meng · 9 years ago
  87. 61788e4 x86: Move lapic_setup() call into init_bsp() by Bin Meng · 9 years ago
  88. 6e6f4ce x86: Move MP initialization codes into a common place by Bin Meng · 9 years ago
  89. 946c2b5 x86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONS by Bin Meng · 9 years ago
  90. 4c71322 x86: kconfig: Fix minor nits in MAX_CPUS by Bin Meng · 9 years ago
  91. 063374d x86: kconfig: Make MAX_CPUS and AP_STACK_SIZE depend on SMP by Bin Meng · 9 years ago
  92. be3f06b x86: dm: Clean up cpu drivers by Bin Meng · 9 years ago
  93. aefaff8 x86: fsp: Move FspInitEntry call to board_init_f() by Bin Meng · 9 years ago
  94. 002610f x86: fsp: Load GDT before calling FspInitEntry by Bin Meng · 9 years ago
  95. 343fb99 x86: Add Kconfig options to be used by arch/x86/cpu/config.mk by Bin Meng · 9 years ago
  96. 4905dfc Merge branch 'master' of git://git.denx.de/u-boot-spi by Tom Rini · 9 years ago
  97. a70e86f Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  98. fe11ae2 usb: Add EHCI support for Armada 38x (mvebu) by Stefan Roese · 9 years ago
  99. 4d991cb arm: mvebu: Add SATA/SCSI (AHCI) support for Armada A38x by Stefan Roese · 9 years ago
  100. 7f1adcd arm: mvebu: Add SDIO/SDHCI support for Armada A38x by Stefan Roese · 9 years ago