Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 29321c0518d99494ab2a250e5b4f75b3add83b11 / include / configs / omap3_beagle.h
  1. 29321c0 ehci-omap: driver for EHCI host on OMAP3 by Ilya Yanok · 13 years ago
  2. 928c4bd usb: ulpi: Add omap-ulpi-view port support by Govindraj.R · 13 years ago
  3. d3022c5 nand_spl_simple: store ecc data on the stack by Stefano Babic · 13 years ago
  4. 75c57a3 OMAP3: Add SPL support to Beagleboard by Tom Rini · 13 years ago
  5. 27b8c8f BeagleBoard: config: Really switch to ttyO2 by Koen Kooi · 13 years ago
  6. 81dcf8b ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused by Thomas Weber · 13 years ago
  7. 0997561 ARM: OMAP3: Remove unused define SDRC_R_C_B by Thomas Weber · 13 years ago
  8. 8152c6f ARM: OMAP3: Remove unused define CONFIG_OMAP3430 by Thomas Weber · 13 years ago
  9. 8e40852 omap: fix cache line size for omap3/omap4 boards by Aneesh V · 13 years ago
  10. 73ce500 BeagleBoard: config: Switch to ttyO2 by Alexander Holler · 13 years ago
  11. 3c6e50d omap: beagle: Use ubifs instead of jffs2 for nand boot by Steve Sakoman · 13 years ago
  12. 31a4f1e board configs: drop NET_MULTI references by Mike Frysinger · 13 years ago
  13. 205c065 OMAP3 Beagle: Minor config cleanup by Sandeep Paulraj · 13 years ago
  14. 8c4e0ca omap3: beagle: Fix build warning by Sanjeev Premi · 13 years ago
  15. f4b36ea BeagleBoard: config: updated default configuration by Jason Kridner · 13 years ago
  16. f74fc4a BeagleBoard: config: Enabled multibus support for I2C in configuration by Jason Kridner · 13 years ago
  17. c522eac BeagleBoard: config: add optargs/buddy/camera by Jason Kridner · 13 years ago
  18. 933d370 BeagleBoard: config: increase command-line functionality by Jason Kridner · 13 years ago
  19. 780a97f BeagleBoard: config: make mtest run by Jason Kridner · 14 years ago
  20. 25a4d01 BeagleBoard: config: enable DSS by Koen Kooi · 13 years ago
  21. 54b62d5 BeagleBoard: config: enable asix driver and dhcp by Koen Kooi · 13 years ago
  22. 2162439 BeagleBoard: config: enable networking by Koen Kooi · 13 years ago
  23. 4c37e8d BeagleBoard: config: decrease bootdelay to 2 seconds by Koen Kooi · 13 years ago
  24. e682930 BeagleBoard: config: use uImage.beagle for tftp by Joel A Fernandes · 13 years ago
  25. ec556ff BeagleBoard: config: hardcode MAC for onboard SMSC by Joel A Fernandes · 13 years ago
  26. e5549f0 BeagleBoard: config: load kernel from MMC ext, not FAT by Koen Kooi · 13 years ago
  27. f835ea7 BeagleBoard: Added userbutton command by Jason Kridner · 14 years ago
  28. b166031 beagle: pass expansionboard name in bootargs by Koen Kooi · 13 years ago
  29. 2490e59 OMAP: Remove omapfb.debug=y from Beagle and Overo env settings by Steve Sakoman · 14 years ago
  30. f62b125 OMAP3/4: Increase console I/O buffer size by Vaibhav Hiremath · 13 years ago
  31. 75f980b Removed unused define, CONFIG_ARMV7. by Christopher Harvey · 13 years ago
  32. 2cc195e Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments by Michael Jones · 14 years ago
  33. f38536f Merge branch 'master' of git://git.denx.de/u-boot-arm by Wolfgang Denk · 14 years ago
  34. 6cbec7b ARMV7: OMAP3: Cleanup extern variables in mem.c by Luca Ceresoli · 14 years ago
  35. d90859a omap3_beagle: enable EHCI and USB storage. by Alexander Holler · 14 years ago
  36. f6e593b OMAP3: BeagleBoard: add xM rev B to ID table by Koen Kooi · 14 years ago
  37. cf073e4 omap3_beagle: enable the use of a plain text file by Alexander Holler · 14 years ago
  38. 70d8c94 BeagleBoard: Added LED driver by Jason Kridner · 14 years ago
  39. ed59e58 Remove device tree booting dependency on CONFIG_SYS_BOOTMAPSZ by Grant Likely · 14 years ago
  40. 53736ba OMAP3: SPI driver by Dirk Behme · 14 years ago
  41. 8b6724a OMAP3: remove unused config macros by Grazvydas Ignotas · 15 years ago
  42. 31bfcf1 ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE by Steve Sakoman · 14 years ago
  43. ca5f80a ARMV7: OMAP3: Add expansion board detection for Beagle by Koen Kooi · 14 years ago
  44. 25ddd1f Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value by Wolfgang Denk · 14 years ago
  45. b485556 ARM: enable device tree for beagle by John Rigby · 14 years ago
  46. 0cd3114 ARMV7: OMAP4: Use generic mmc driver on Beagle by Steve Sakoman · 14 years ago
  47. 7b7903e ARMV7: OMAP: Use default vendor/product ID for USB gadget by Steve Sakoman · 14 years ago
  48. 11080ab ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOC by Ben Gardiner · 14 years ago
  49. a784c01 ARM: relocation: fix typo in comment by Heiko Schocher · 14 years ago
  50. 561142a ARM: implement relocation for ARM V7 (OMAP) by Heiko Schocher · 14 years ago
  51. 95c6f6d ARM V7 (OMAP): add data cache support, test on Beagle board by Heiko Schocher · 14 years ago
  52. 60c2317 ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs by Steve Sakoman · 14 years ago
  53. 5af3246 ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle by Steve Sakoman · 15 years ago
  54. f56348a ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 by Steve Sakoman · 14 years ago
  55. cae377b omap3: Consolidate SDRC related operations by Vaibhav Hiremath · 14 years ago
  56. 632e1d9 OMAP3 Move declaration of gpmc_cfg. by Tom Rix · 15 years ago
  57. 1270ec1 Remove superfluous uses of V_PROMPT macro. by Robert P. J. Day · 15 years ago
  58. 25374bf OMAP3 beagle Add usbtty configuration by Tom Rix · 15 years ago
  59. 4b142fe common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL by Heiko Schocher · 15 years ago
  60. 30563a0 OMAP3:SDRC: introduce DDR types by Nishanth Menon · 15 years ago
  61. 9c44ddc TI: OMAP3: Remove SZ_xx references by Sandeep Paulraj · 15 years ago
  62. 13d2cb9 OMAP3: Update Overo and Beagle environment by Steve Sakoman · 15 years ago
  63. 0297ec7 TI OMAP3 Use arm init sequence to initialize i2c by Tom Rix · 15 years ago
  64. 97a099e omap3: remove typedefs for configuration structs by Dirk Behme · 15 years ago
  65. 187af95 omap3: embedd gpmc_cs into gpmc config struct by Matthias Ludwig · 15 years ago
  66. 2c15513 OMAP3 Move twl4030 power and led functions by Tom Rix · 15 years ago
  67. 2eb99ca NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... by Wolfgang Denk · 15 years ago
  68. 942556a mtd: MTD related config header changes (mtdparts command) by Stefan Roese · 16 years ago
  69. d3a513c OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000 by Manikandan Pillai · 16 years ago
  70. 42bf4b2 OMAP3: Remove legacy NAND defines by Dirk Behme · 16 years ago
  71. 6a6b62e OMAP3: Use functions print_cpuinfo() and checkboard() by Sanjeev Premi · 16 years ago
  72. a85693b OMAP3: Fix changed mmc init command by Dirk Behme · 16 years ago
  73. 74de7ae Add "source" command; prepare removal of "autoscr" command by Wolfgang Denk · 16 years ago
  74. 81472d8 OMAP: rename timer divisor by Ladislav Michl · 16 years ago
  75. 488f5d8 Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ by Ladislav Michl · 16 years ago
  76. 917cfc7 OMAP3:Beagle: Enable mtdparts by Nishanth Menon · 16 years ago
  77. f904cdb OMAP3: Add common power code, README, and BeagleBoard by Dirk Behme · 16 years ago