- 29cc2b5 Convert CONFIG_RESET_PHY_R to Kconfig by Tom Rini · 2 years, 8 months ago
- 5a606a4 Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig by Tom Rini · 2 years, 8 months ago
- a958c58 Merge tag 'dm-pull-18mar22' of https://source.denx.de/u-boot/custodians/u-boot-dm into next by Tom Rini · 2 years, 8 months ago
- acc874a sandbox: Add the handoff header for spl by Simon Glass · 2 years, 9 months ago
- d02f99d sandbox: Show a message when writing out the ram buffer by Simon Glass · 2 years, 9 months ago
- cb81640 Convert CONFIG_ATMEL_LEGACY to Kconfig by Tom Rini · 2 years, 9 months ago
- 5644f3b Convert CONFIG_AT91_GPIO_PULLUP to Kconfig by Tom Rini · 2 years, 9 months ago
- 675e703 Convert CONFIG_AT91SAM9260 et al to Kconfig by Tom Rini · 2 years, 9 months ago
- ae3f467 Convert CONFIG_AM335X_USB0 et al to Kconfig by Tom Rini · 2 years, 9 months ago
- 5d6a64f Remove CONFIG_HAS_ETH0 et al symbols by Tom Rini · 2 years, 9 months ago
- 0b5870c powerpc: Move CONFIG_BPTR_VIRT_ADDR out of CONFIG namespace by Tom Rini · 2 years, 9 months ago
- 01d1b99 Convert CONFIG_NET_RETRY_COUNT to Kconfig by Tom Rini · 2 years, 9 months ago
- 5d4e863 Convert CONFIG_ARP_TIMEOUT to Kconfig by Tom Rini · 2 years, 9 months ago
- 5f7c886 Convert CONFIG_A008044_WORKAROUND to Kconfig by Tom Rini · 2 years, 9 months ago
- fdd0da4 Convert CONFIG_A003399_NOR_WORKAROUND to Kconfig by Tom Rini · 2 years, 9 months ago
- b53a280 Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig by Tom Rini · 2 years, 9 months ago
- 0da35fa Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig by Tom Rini · 2 years, 9 months ago
- 297e6eb Merge tag 'xilinx-for-v2022.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 2 years, 8 months ago
- 0ac03fb arm64: zynqmp: Add pinctrl emmc description to SM-K26 by Michal Simek · 2 years, 9 months ago
- 2abf048 Merge tag 'v2022.04-rc4' into next by Tom Rini · 2 years, 8 months ago
- 630a306 Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 9 months ago
- e5d8d08 arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 by Michal Simek · 2 years, 9 months ago
- 037bb6e arm: a37xx: Remap IO space to bus address 0x0 by Pali Rohár · 2 years, 9 months ago
- 978a8a2 x86: Add an enum name for the GNVS firmware type by Simon Glass · 2 years, 9 months ago
- 6d35c24 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi by Tom Rini · 2 years, 9 months ago
- b9d0f00 arm: add initial support for the Phytium Pomelo Board by weichangzheng · 2 years, 9 months ago
- 901ff69 ARM: mach-omap2: omap3: Make clock functions static by Adam Ford · 2 years, 9 months ago
- 72ce781 ARM: dts: am3517-evm: Sync DTS with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- 08ff17d ARM: dts: logicpd-torpedo: Resyc DTS files with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- d0331d4 ARM: dts: logicpd-som-lv: Resync DTS files with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- 7fe32b3 event: Convert arch_cpu_init_dm() to use events by Simon Glass · 2 years, 9 months ago
- 42fdceb event: Convert misc_init_f() to use events by Simon Glass · 2 years, 9 months ago
- d41b703 sandbox: start: Sort the header files by Simon Glass · 2 years, 9 months ago
- 81a46c1 sunxi: Kconfig: Fix up SPI configuration by Andre Przywara · 2 years, 11 months ago
- 9fb9ec5 arm64: zynqmp: add support for zcu106 rev1.0 by Neal Frager · 2 years, 9 months ago
- 7da8754 ARM: dts: ast2500: Add ngpios property to GPIO node by Andrew Jeffery · 2 years, 9 months ago
- 4a9099e arm: dts: Add DTS description for MMC2 am33xx devices by Lukasz Majewski · 2 years, 9 months ago
- ab9e48f arm: dts: Add mmc[01] aliases to am33xx.dtsi by Lukasz Majewski · 2 years, 9 months ago
- 3bf5e43 arch: arm: dts: bcm96753ref: enable led support by Philippe Reynes · 2 years, 9 months ago
- 66425ca arch: arm: dts: bcm6753: add led support by Philippe Reynes · 2 years, 9 months ago
- a241ccd bcm96753ref: add initial support by Philippe Reynes · 2 years, 10 months ago
- 1d5555f bcm6753: add initial support by Philippe Reynes · 2 years, 10 months ago
- 2f6e1dd arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards by Michal Simek · 2 years, 9 months ago
- 8b82a3a arm64: zynqmp: Enable DP driver for SOMs by Michal Simek · 2 years, 9 months ago
- ff79448 arm64: zynqmp: Switch to ethernet-phy-id in kv260 by Michal Simek · 2 years, 9 months ago
- a3efa53 arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM by Michal Simek · 2 years, 9 months ago
- 59e1bdd arm64: zynqmp: Setup clock for DP and DPDMA by Michal Simek · 2 years, 9 months ago
- c36dc24 arm64: zynqmp: Move usb hub from i2c to usb node by Michal Simek · 2 years, 9 months ago
- d7b5cc8 microblaze: Do not place u-boot to reserved memory location by Michal Simek · 2 years, 9 months ago
- 03a8e82 ARM: dts: zynq: add NAND flash controller node by Michael Walle · 2 years, 9 months ago
- 6d3c46e Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 9 months ago
- 39834cc arm: dts: iot2050: Add cfg register space for ringacc and udmap by Jan Kiszka · 2 years, 9 months ago
- f7fbe54 arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT by Christian Gmeiner · 2 years, 9 months ago
- 1fd5425 arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again by Pali Rohár · 2 years, 9 months ago
- f9147d6 Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig by Tom Rini · 2 years, 9 months ago
- 6d21dd3 Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig by Tom Rini · 2 years, 9 months ago
- da8592d Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig by Tom Rini · 2 years, 9 months ago
- a7e6c6b Convert CONFIG_BOARD_COMMON to Kconfig by Tom Rini · 2 years, 9 months ago
- 43ea564 arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG by Tom Rini · 2 years, 9 months ago
- a3041d9 Convert CONFIG_BTB to Kconfig by Tom Rini · 2 years, 9 months ago
- 3db7b2b powerpc: Remove unused MPC8540/60ADS code by Tom Rini · 2 years, 9 months ago
- d274f92 Merge tag 'u-boot-at91-fixes-2022.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 by Tom Rini · 2 years, 9 months ago
- 705b584 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 2 years, 9 months ago
- c21f3d4 sunxi: f1c100s: Fix FEL registers restore by Andre Przywara · 2 years, 9 months ago
- 640f2f3 mach-sunxi: Enable SPI boot for SUNIV and licheepi nano by Jesse Taube · 2 years, 10 months ago
- 0dcdaff mach-sunxi: Add SPL SPI boot for SUNIV by Jesse Taube · 2 years, 10 months ago
- a08b04b mach-sunxi: Add boot device detection for SUNIV/F1C100s by Jesse Taube · 2 years, 10 months ago
- 10d3e5d firmware: scmi: fix sandbox and related tests for clock discovery by Etienne Carriere · 2 years, 9 months ago
- 41d62e2 sandbox: scmi: test against a single scmi agent by Etienne Carriere · 2 years, 9 months ago
- 5ff4857 armv8: Fix and simplify branch_if_master/branch_if_slave by Andre Przywara · 2 years, 10 months ago
- f660fe0 armv8: Simplify switch_el macro by Andre Przywara · 2 years, 10 months ago
- 7ab2e47 arm: Clean up asm/io.h by Andre Przywara · 2 years, 10 months ago
- 7ed340a armv8: Force SP_ELx stack pointer usage by Andre Przywara · 2 years, 10 months ago
- 6c7691e armv8: Always unmask SErrors by Andre Przywara · 2 years, 10 months ago
- 6fb4f73 arm: apple: Switch to fully dynamic mem layout by Janne Grunau · 2 years, 9 months ago
- 554a853 board: sl28: use fit image generator by Michael Walle · 2 years, 9 months ago
- 90de95f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb by Tom Rini · 2 years, 9 months ago
- 0935dbf usb: ehci-omap: Drop dead code by Adam Ford · 2 years, 9 months ago
- 00959d8 spl: x86: Correct the binman symbols for SPL by Simon Glass · 2 years, 10 months ago
- 17a0dc6 Merge branch '2022-02-21-platform-updates' by Tom Rini · 2 years, 9 months ago
- 5d90836 arm: dts: k3-j7200: Fix up MAIN R5FSS cluster mode back to Split-mode by Suman Anna · 2 years, 9 months ago
- 68a51cc arm: omap3: Make some memory functions static and clean headers by Adam Ford · 2 years, 10 months ago
- 1c6ea4d arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO by Adam Ford · 2 years, 10 months ago
- da6a8d9 arm: dts: k3-j721e-r5-common-proc-board: tps659413: Correct the min/max voltages of VDD_CPU by Keerthy · 2 years, 10 months ago
- a89fea7 arm: apple: Add M1 Pro/Max support by Mark Kettenis · 2 years, 10 months ago
- 24b628a Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 9 months ago
- 9bd4232 arm64: zynqmp: Remove additional gpio header from dlc21 by Michal Simek · 2 years, 9 months ago
- 11381fb arm64: zynqmp: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 05f0f26 ARM: zynq: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 83d2941 arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLED by Michal Simek · 2 years, 9 months ago
- 27703ba arm64: zynqmp: Build psu_spl_init for SPL all the time by Michal Simek · 2 years, 9 months ago
- fea6607 ARM: imx: imx8mn-ddr4-evk: Add ethernet support by Marek Vasut · 2 years, 9 months ago
- 9da828c imx8m: Drop unused function env_get_offset by Michael Trimarchi · 3 years ago
- 2cb156e board: gateworks: venice: add imx8mn-gw7902 support by Tim Harvey · 2 years, 10 months ago
- ddb56f3 arm: imx8m: add support for Advantech RSB-3720 by Ying-Chun Liu (PaulLiu) · 2 years, 10 months ago
- e72cb77 arm: dts: imx8mq: add MNT Reform 2 by Patrick Wildt · 2 years, 11 months ago
- f62611a imx: spl: Fix typo BMODE_EMI -> BMODE_EIM by Harald Seiler · 3 years ago
- 8ad1c9c Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 9 months ago
- 871ee66 arm: mvebu: spl: Add option to reset the board on DDR training failure by Marek Behún · 2 years, 9 months ago
- 18ab060 arm: mvebu: a37xx: Fix comment with name of the function by Pali Rohár · 2 years, 9 months ago