Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2aeda2d054bb32027bed33d9c3a63d152164b5e0
  1. 160131b Add the files for the SMN42 board by Peter Pearse · 18 years ago
  2. 5c6d2b5 Remove the deleted files for the SMN42 patch by Peter Pearse · 18 years ago
  3. b0d8f5b New board SMN42 branch by Peter Pearse · 18 years ago
  4. 29f3be0 Makefile permissions by Peter Pearse · 18 years ago
  5. b84289b 8641hpcn: Fix Makefile after moving pixis to board/freescale. by Ed Swarthout · 18 years ago
  6. e69f66c add: reading special purpose registers by Michal Simek · 18 years ago
  7. 1a50f164 add: Microblaze V5 exception handling by Michal Simek · 18 years ago
  8. ab874d5 add: FSL control read and write by Michal Simek · 18 years ago
  9. de1de02 [Motion-PRO] Add support for I2C, EEPROM and RTC. by Piotr Kruszynski · 18 years ago
  10. fa5c2ba [Motion-PRO] Add ATA support. Add CF-booting commands to the default by Bartlomiej Sieka · 18 years ago
  11. 06241d5 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This by Bartlomiej Sieka · 18 years ago
  12. 1f1369c [Motion-PRO] Enable Flat Device Tree support and modify default environment by Bartlomiej Sieka · 18 years ago
  13. 3c4bd60 Merge git://www.denx.de/git/u-boot by Michal Simek · 18 years ago
  14. fb05f6d new: USE_MSR_INTR support by Michal Simek · 18 years ago
  15. 008861a [MPC5xxx] There are networking problems on the Motion-PRO board with by Bartlomiej Sieka · 18 years ago
  16. abca901 Get rid of duplicated file (see include/configs/sbc8560.h instead) by Wolfgang Denk · 18 years ago
  17. 207b7b2 Get rid of duplicated file (see doc/README.SBC8560 instead) by Wolfgang Denk · 18 years ago
  18. a7bac7e fix: read and write MSR - repair number of parameters by Michal Simek · 18 years ago
  19. 193b4a3 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file by Jeffrey Mann · 18 years ago
  20. 19bf1fb new: fsl interrupt support FSL_Has_data is connected to INTC. by Michal Simek · 18 years ago
  21. 792032b fix: interrupt handler remove asm code by Michal Simek · 18 years ago
  22. f3f001a fix: remove asm code by Michal Simek · 18 years ago
  23. fb7c2db fix: clean interrupt by Michal Simek · 18 years ago
  24. 42efed6 fix: interrupt handler for multiple sources by Michal Simek · 18 years ago
  25. 48fbd3a new: add writing to msr register by Michal Simek · 18 years ago
  26. 3a619dd Fix an ancient CHANGELOG conflict by Markus Klotzbuecher · 18 years ago
  27. 6ede0c8 Merge with git://www.denx.de/git/u-boot.git by Markus Klotzbuecher · 18 years ago
  28. 426a442 Merge with /home/git/u-boot by Wolfgang Denk · 18 years ago
  29. ac4cd59 5xxx: write MAC address to mac-address and local-mac-address by Timur Tabi · 18 years ago
  30. a9d87e2 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message by Grzegorz Wianecki · 18 years ago
  31. 4ec5bd5 [PATCH] simplify silent console by Ladislav Michl · 18 years ago
  32. b7598a4 [PATCH] Avoid assigning PCI resources from zero address by Sergei Shtylyov · 18 years ago
  33. 9ffd451 [patch] setenv(...) can delete environmentalvariables by Jeffrey Mann · 18 years ago
  34. ebd0a0a [patch] use unsigned char in smc91111 driver for mac by Mike Frysinger · 18 years ago
  35. 2be1bab Merge with git://www.denx.de/git/u-boot-testing by Wolfgang Denk · 18 years ago
  36. ffc50f9 new: FSL and MSR support #2 by Michal Simek · 18 years ago
  37. f7e2e0e new: FSL and MSR support by Michal Simek · 18 years ago
  38. 2f15278 Coding stylke cleanup; update CHANGELOG. by Wolfgang Denk · 18 years ago
  39. f516973 Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx by Wolfgang Denk · 18 years ago
  40. 885ec89 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG. by Wolfgang Denk · 18 years ago
  41. 49db23d4 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xx by Wolfgang Denk · 18 years ago
  42. 5499645 Make "file" command happy with some config.mk files; update CHANGELOG by Wolfgang Denk · 18 years ago
  43. 55aee10 Merge with /home/wd/git/u-boot/custodian/u-boot-nand-flash by Wolfgang Denk · 18 years ago
  44. 5c3d767 Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xx by Wolfgang Denk · 18 years ago
  45. beb7dba Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 18 years ago
  46. e3b8c78 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz by Jeffrey Mann · 18 years ago
  47. f544ff6 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting by Stefan Roese · 18 years ago
  48. 2f550ab 5xxx: write MAC address to mac-address and local-mac-address by Timur Tabi · 18 years ago
  49. 9fab118 Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 18 years ago
  50. a798865 NAND: Wrong calculation of page number in nand_block_bad() by Thomas Knobloch · 18 years ago
  51. 9877d7d Fix initrd length corruption in bootm command. by Wolfgang Denk · 18 years ago
  52. 068aab6 mpc83xx: fix trivial error in MAKEALL by Kim Phillips · 18 years ago
  53. c64a89d Update board configuration for STX GP3SSA board: by Wolfgang Denk · 18 years ago
  54. 2c6fb19 Cleanup STX GP3SSA code; fix build and compile problems. by Wolfgang Denk · 18 years ago
  55. 35171dc Add support for STX GP3SSA (stxssa) Board by Dan Malek · 18 years ago
  56. f2134f8 macb: Don't restart autonegotiation if we already have link by Haavard Skinnemoen · 18 years ago
  57. 04fcb5d macb: Introduce a few barriers when dealing with DMA descriptors by Haavard Skinnemoen · 18 years ago
  58. ffa621a Cleaned up some 85xx PCI bugs by Andy Fleming · 18 years ago
  59. 6743105 Add support for the 8568 MDS board by Andy Fleming · 18 years ago
  60. af1c2b8 Add support for treating unknown PHYs as generic PHYs. by David Updegraff · 18 years ago
  61. a75af9b Conditionalize 8641 Rev1.0 MCM workarounds by James Yang · 18 years ago
  62. f64702b Fix memory initialization on MPC8349E-mITX by Timur Tabi · 18 years ago
  63. 54b2d43 mpc83xx: replace elaborate boottime verbosity with 'clocks' command by Kim Phillips · 18 years ago
  64. c1ab826 Rewrote picos_to_clk() to avoid rounding errors. by James Yang · 18 years ago
  65. bd38b7e Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 18 years ago
  66. 6f69bbc Merge with /home/stefan/git/u-boot/u-boot-ppc4xx by Stefan Roese · 18 years ago
  67. 8b39501 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver by Stefan Roese · 18 years ago
  68. 864aa6a [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message by Grzegorz Wianecki · 18 years ago
  69. 5c5d324 mpc83xx: minor fixups for 8313rdb introduction by Kim Phillips · 18 years ago
  70. ada4d40 [PATCH] simplify silent console by Ladislav Michl · 18 years ago
  71. 144876a [PATCH] MTD partition support, JFFS2 support by Michal Simek · 18 years ago
  72. 37ed6cd ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content. by Matthias Fuchs · 18 years ago
  73. 66ed6cc Reworked 85xx speed detection code by Andy Fleming · 18 years ago
  74. 81f481c Enable 8544 support by Andy Fleming · 18 years ago
  75. 0d8c3a2 Support 1G size on 8548 by Andy Fleming · 18 years ago
  76. 45cef61 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG by Andy Fleming · 18 years ago
  77. 1f9a318 Only set ddrioovcr for 8548 rev1. by Andy Fleming · 18 years ago
  78. 9343dbf Tweak DDR ECC error counter by Andy Fleming · 18 years ago
  79. 85e7c7a 85xx: write MAC address to mac-address and local-mac-address by Timur Tabi · 18 years ago
  80. 03b81b4 Some 85xx cpu cleanups by Andy Fleming · 18 years ago
  81. 151d5d9 Add cpu support for the 8544 by Andy Fleming · 18 years ago
  82. 25d83d7 Add MPC8544DS basic port board files. by Jon Loeliger · 18 years ago
  83. 0cde4b0 Add MPC8544DS main configuration file. by Jon Loeliger · 18 years ago
  84. 362dd83 Fix PCI I/O space mapping on Freescale MPC85x0ADS by Sergei Shtylyov · 18 years ago
  85. 96629cb u-boot: Fix e500 v2 core reset bug by Zang Roy-r61911 · 18 years ago
  86. 63247a5 u-boot: v2: Remove the fixed TLB and LAW entrynubmer by Zang Roy-r61911 · 18 years ago
  87. 0b1934b u-boot: Fix the 85xxcds tsec bug by Zang Roy-r61911 · 18 years ago
  88. 7337b23 u-boot: Fix CPU2 errata on MPC8548CDS board by Zang Roy-r61911 · 18 years ago
  89. 39b18c4 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default by ebony.zhu@freescale.com · 18 years ago
  90. 41fb7e0 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board by Zang Roy-r61911 · 18 years ago
  91. 96b8a05 mpc83xx: Add MPC8313ERDB support. by Scott Wood · 18 years ago
  92. 49ea3b6 mpc83xx: Add generic PCI setup code. by Scott Wood · 18 years ago
  93. 7c98e51 mpc83xx: Add 831x support to speed.c. by Scott Wood · 18 years ago
  94. 0f25328 mpc83xx: Add 831x support to global_data.h by Scott Wood · 18 years ago
  95. 95e7ef8 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu(). by Scott Wood · 18 years ago
  96. a35b0c4 mpc83xx: Recognize SPR values for MPC8311 and MPC8313. by Scott Wood · 18 years ago
  97. d87c57b mpc83xx: Add register definitions for MPC831x. by Scott Wood · 18 years ago
  98. 396955f Merge git://www.denx.de/git/u-boot by Kim Phillips · 18 years ago
  99. 7fc4c71 Fix file mode by Stefan Roese · 18 years ago
  100. 6554ca0 Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 18 years ago