Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 2ef98d33166e5c22a61eba29c20e236b72f1e8a2
  1. 9a80e71 usb: kbd: Do not deregister usbkbd twice when using dm by Hans de Goede · 9 years ago
  2. cfb3f1c usb: ehci-hcd: Fix crash when no ops are provided to ehci_register() by Mateusz Kulikowski · 9 years ago
  3. ac7eef7 board: pic32mzda: enable USB-host, USB-storage support. by Purna Chandra Mandal · 9 years ago
  4. 03b8e04 drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller. by Purna Chandra Mandal · 9 years ago
  5. 6d94810 drivers: remove writes{b,w,l,q} and reads{b,w,l,q}. by Purna Chandra Mandal · 9 years ago
  6. f968467 arm: add missing writes[bwql], reads[bwql]. by Purna Chandra Mandal · 9 years ago
  7. e16e137 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 9 years ago
  8. 5068946 powerpc: mpc85xx: Enable pre-relocation malloc for MPC85xx by mario.six@gdsys.cc · 9 years ago
  9. b39d121 powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE by York Sun · 9 years ago
  10. 4c1ceb6 powerpc: t1040qds: Use generic ethsw commands by Codrin Ciubotariu · 9 years ago
  11. 43d3fb5 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  12. 3c1d218 armv8: LS2080A: Consolidate LS2080A and LS2085A by York Sun · 9 years ago
  13. 2a55583 armv8: ls1043a: load Fman ucode from SD/MMC under SD boot by Qianyu Gong · 9 years ago
  14. fd1b147 armv8: ls1043a: load Fman ucode from NAND flash under NAND boot by Qianyu Gong · 9 years ago
  15. 1b245d9 armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 by Wenbin Song · 9 years ago
  16. 9607789 arm: ls102xa: Fix order of CSU indexes in ns_access.h by Vincent Siles · 9 years ago
  17. 70e21b0 armv8: LSCH2 early and final mmu needs matching NS attribute by Ed Swarthout · 9 years ago
  18. ce96ba4 armv8: ls1043aqds: make sure fixed-link property is big endian by Shaohui Xie · 9 years ago
  19. 9101a68 drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only by Codrin Ciubotariu · 9 years ago
  20. 02c00f2 drivers: net: vsc9953: Do not configure disabled ports by Codrin Ciubotariu · 9 years ago
  21. 5330c7d fsl: esdhc: consolidate fsl_esdhc_cfg structure by Peng Fan · 9 years ago
  22. 96f0407 fsl: esdhc: support driver model by Peng Fan · 9 years ago
  23. 46a16bd kirkwood_nand: claim MPP pins on the fly by Chris Packham · 9 years ago
  24. 9fc5663 spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU by Stefan Roese · 9 years ago
  25. 4ed6ed3 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  26. 07654ba ARM64: zynqmp: Enable EFI partition support by Michal Simek · 9 years ago
  27. 845ee5f net: zynq_gem: Add SGMII support for zynqMP by Siva Durga Prasad Paladugu · 9 years ago
  28. 85b949f net: phy: Add SGMII support for TI phy by Siva Durga Prasad Paladugu · 9 years ago
  29. e76d2dc net: zynq_gem: Return error incase of invalid phy address by Siva Durga Prasad Paladugu · 9 years ago
  30. 4d1ed9c ARM: zynq: Add uEnv.txt support by Michal Simek · 9 years ago
  31. 26ae920 ARM: zynq: Enable FLASH_BAR for microzed and zybo by Michal Simek · 9 years ago
  32. 679b994 block: Add support for Ceva sata by Michal Simek · 9 years ago
  33. 6d3ddfc ARM64: zynqmp: Simplify MAINTAINERS file to support more boards by Michal Simek · 9 years ago
  34. 8d59d7f ARM64: zynqmp: Read RAM information from DT by Michal Simek · 9 years ago
  35. a3afb4a ARM64: Move HUSH enabling from board file to defconfig by Michal Simek · 9 years ago
  36. a1108da ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig by Michal Simek · 9 years ago
  37. 46f68e6 ARM64: zynqmp: Enable FAT write and EXT4 write for USB too by Michal Simek · 9 years ago
  38. 5cfd918 ARM64: zynqmp: Decrease boot delay by Soren Brinkmann · 9 years ago
  39. ceb04e1 net: axi_emac: Report phy-node error message permanently by Michal Simek · 9 years ago
  40. a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
  41. 9aa65ca microblaze: Read information about timer/interrupts from DT by Michal Simek · 9 years ago
  42. 66de226 ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO by Michal Simek · 9 years ago
  43. 996503e ARM: zynq: zybo: Enabling reading MAC address from EEPROM by Michal Simek · 9 years ago
  44. a509a1d net: gem: Allow to set the MAC from an EEPROM by Joe Hershberger · 9 years ago
  45. b7b3efe ARM: zynq: Enable option to overwrite default variables by Michal Simek · 9 years ago
  46. 8964f24 net: xilinx_axi: Clear Isolate bit if found during phy setup by Siva Durga Prasad Paladugu · 9 years ago
  47. 9c0da76 net: xilinx_axi: Use interface type instead of zero by Siva Durga Prasad Paladugu · 9 years ago
  48. 217185b zynq-common: Enable phy driver for Xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  49. a06c341 net: zynq_gem: Add support for SGMII interface by Siva Durga Prasad Paladugu · 9 years ago
  50. ed6fad3 phy: Add phy driver support for xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  51. 7e10a7c Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 9 years ago
  52. 30eae26 common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE by Stefan Roese · 9 years ago
  53. ebe7890 arm: mvebu: Don't enable d-cache on A375 by Stefan Roese · 9 years ago
  54. 606576d arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 by Stefan Roese · 9 years ago
  55. 09e89ab arm: mvebu: Add basic support for the Marvell Armada 375 SoC by Stefan Roese · 9 years ago
  56. 0b45a79 dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4 by Stefan Roese · 9 years ago
  57. 99d4c6d net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 by Stefan Roese · 9 years ago
  58. 951f1b5 spi: kirkwood_spi.c: Add compatible match ID for Armada 375 by Stefan Roese · 9 years ago
  59. 59c9e9b mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations by Tom Rini · 9 years ago
  60. 2249b5a mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation by Tom Rini · 9 years ago
  61. 6baa261 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file by Fabio Estevam · 9 years ago
  62. 01f512b warp7: Pass the UART base definition by Fabio Estevam · 9 years ago
  63. 30ba8eb mx6sabresd: Remove unneeded enable_lvds() function by Fabio Estevam · 9 years ago
  64. a473122 arm: mxs: Update MX28EVK config by Marek Vasut · 9 years ago
  65. 563d8d9 net: phy: Realtek RTL8211B/C PHY ID fix by Karsten Merker · 9 years ago
  66. 3ef9cdb MAINTAINERS: Update Scott Wood's email address by Scott Wood · 9 years ago
  67. 96baf36 sata: use block layer for sata command by Eric Nelson · 9 years ago
  68. bcfde7f mmc: use block layer in mmc command by Eric Nelson · 9 years ago
  69. e40cf34 drivers: block: add block device cache by Eric Nelson · 9 years ago
  70. e721e98 Add myself as Snapdragon and SPMI maintainer by Mateusz Kulikowski · 9 years ago
  71. 626f048 board: Add Qualcomm Dragonboard 410C support by Mateusz Kulikowski · 9 years ago
  72. 0859213 arm: Add support for Qualcomm Snapdragon family by Mateusz Kulikowski · 9 years ago
  73. 120800d gpio: Add support for Qualcomm PM8916 gpios by Mateusz Kulikowski · 9 years ago
  74. c2f74c8 pmic: Add support for Qualcomm PM8916 PMIC by Mateusz Kulikowski · 9 years ago
  75. 5b47271 drivers: spmi: Add support for Qualcomm SPMI bus driver by Mateusz Kulikowski · 9 years ago
  76. d33776e spmi: Add sandbox test driver by Mateusz Kulikowski · 9 years ago
  77. 04868b4 drivers: Add SPMI bus uclass by Mateusz Kulikowski · 9 years ago
  78. 5a82211 ehci: Add support for Qualcomm EHCI by Mateusz Kulikowski · 9 years ago
  79. d144f96 ehci-ci.h: drop generic USBCMD fields by Mateusz Kulikowski · 9 years ago
  80. d424efb usb: ehci-ci: Add missing registers. by Mateusz Kulikowski · 9 years ago
  81. e162c6b usb: Rename ehci-fsl.h to ehci-ci.h by Mateusz Kulikowski · 9 years ago
  82. 64160a5 eth: asix88179: Print packet length properly by Mateusz Kulikowski · 9 years ago
  83. d3d844f usb: ulpi: Fix compile warning in read/write on 64-bit machines. by Mateusz Kulikowski · 9 years ago
  84. 2cbe57c usb: ulpi: Fix viewport_addr type by Mateusz Kulikowski · 9 years ago
  85. 5493a32 Migrate CONFIG_ULPI* to Kconfig by Mateusz Kulikowski · 9 years ago
  86. 6b14fbb usb: ulpi: Add Kconfig options for ULPI by Mateusz Kulikowski · 9 years ago
  87. 3f9f8a5 ehci-hcd: Add init_after_reset by Mateusz Kulikowski · 9 years ago
  88. 9d11d12 mmc: Add support for Qualcomm SDHCI controller by Mateusz Kulikowski · 9 years ago
  89. 81a87e1 gpio: Add support for Qualcomm gpio controller by Mateusz Kulikowski · 9 years ago
  90. 142a20c serial: Add support for Qualcomm serial port by Mateusz Kulikowski · 9 years ago
  91. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago
  92. 38ce65e efi_loader: Always allocate the highest available address by Alexander Graf · 9 years ago
  93. 41582e2 sniper: Change vendor name from lge to lg, matching devicetree vendor prefix by Paul Kocialkowski · 9 years ago
  94. 523849a kc1: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  95. c15ab5b sniper: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  96. 44b0cf4 kc1: Add some sysboot and devicetree-related environment variables by Paul Kocialkowski · 9 years ago
  97. 163d876 kc1: Select libfdt to allow running devicetree-based kernels by Paul Kocialkowski · 9 years ago
  98. f5fdc37 kc1: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  99. 5fcbca5 sniper: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  100. 62022d5 arm64: booti: add missing unmap_sysmem() by Masahiro Yamada · 9 years ago