- 385d69d arm: smh: Add option to detect semihosting by Sean Anderson · 2 years, 8 months ago
- 8e1c9fe spl: Add semihosting boot method by Sean Anderson · 2 years, 8 months ago
- 8a0a8ff vexpress64: fvp: add distro_boot support by Andre Przywara · 2 years, 9 months ago
- 5865038 vexpress64: move hardware setting from defconfig to Kconfig by Andre Przywara · 2 years, 9 months ago
- c0fce92 vexpress64: fvp: enable OF_CONTROL by Andre Przywara · 2 years, 9 months ago
- fac7fc4 vexpress64: Kconfig: move board definitions out of arch/arm by Andre Przywara · 2 years, 9 months ago
- c6c0e56 keymile: Move sourcing of common Kconfig by Tom Rini · 2 years, 8 months ago
- 2abf048 Merge tag 'v2022.04-rc4' into next by Tom Rini · 2 years, 9 months ago
- b9d0f00 arm: add initial support for the Phytium Pomelo Board by weichangzheng · 2 years, 9 months ago
- 7fe32b3 event: Convert arch_cpu_init_dm() to use events by Simon Glass · 2 years, 9 months ago
- 81a46c1 sunxi: Kconfig: Fix up SPI configuration by Andre Przywara · 2 years, 11 months ago
- a241ccd bcm96753ref: add initial support by Philippe Reynes · 2 years, 10 months ago
- 1d5555f bcm6753: add initial support by Philippe Reynes · 2 years, 10 months ago
- 6d21dd3 Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig by Tom Rini · 2 years, 9 months ago
- 24b628a Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 9 months ago
- 11381fb arm64: zynqmp: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 05f0f26 ARM: zynq: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 753a295 xilinx: Remove GPIO_EXTRA_HEADER selection by Michal Simek · 2 years, 10 months ago
- 7184e29 spi: apple: Add driver for Apple SPI controller by Mark Kettenis · 2 years, 10 months ago
- 81fafbb power: domain: apple: Add reset support by Mark Kettenis · 2 years, 10 months ago
- 456305e mailbox: apple: Add driver for Apple IOP mailbox by Mark Kettenis · 2 years, 10 months ago
- 2564fce sunxi: move Cortex SMPEN setting into start.S by Andre Przywara · 2 years, 10 months ago
- a1d2fd3 board: traverse: add initial Ten64 support by Mathew McBride · 2 years, 10 months ago
- d6b318d Convert CONFIG_TIMESTAMP to Kconfig by Simon Glass · 3 years ago
- 068415e Merge tag 'xilinx-for-v2022.04-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 10 months ago
- 71efd45 arm64: zynqmp: Change firmware dependency by Michal Simek · 2 years, 11 months ago
- 97187d5 power: domain: Add Apple pmgr driver by Mark Kettenis · 2 years, 11 months ago
- 9a8e373 arm: apple: Use watchdog timer for system reset by Mark Kettenis · 2 years, 11 months ago
- 3b441cf zynqmp: gpio: Add support for zynqmp gpio modepin driver by T Karthik Reddy · 3 years, 1 month ago
- 440c00d Convert CONFIG_SYS_KWD_CONFIG to Kconfig by Tom Rini · 3 years ago
- 3aca2b6 Convert CONFIG_CPU_PXA27X to Kconfig by Tom Rini · 3 years ago
- 7856cd5 Convert CONFIG_SYS_PCI_64BIT to Kconfig by Tom Rini · 3 years ago
- 239d22c fdt: Enable OF_HAS_PRIOR_STAGE for most boards with OF_BOARD by Simon Glass · 3 years ago
- b814e00 pinctrl: Add Apple pinctrl driver by Mark Kettenis · 3 years, 1 month ago
- 166a77b Merge tag 'u-boot-stm32-20211110' of https://source.denx.de/u-boot/custodians/u-boot-stm by Tom Rini · 3 years, 1 month ago
- 56a368f gpio: stm32: create include file for driver private data by Patrick Delaunay · 3 years, 1 month ago
- 40edc32 sunxi: Use sysreset framework for poweroff/reset by Samuel Holland · 3 years, 1 month ago
- 785cfde iommu: Add Apple DART driver by Mark Kettenis · 3 years, 1 month ago
- d520e1f serial: s5p: Add Apple M1 support by Mark Kettenis · 3 years, 1 month ago
- 003b657 arm: apple: Add initial support for Apple's M1 SoC by Mark Kettenis · 3 years, 1 month ago
- 60b9b47 Revert "arch: arm: use dt and UCLASS_SYSCON to get gic lpi details" by Michael Walle · 3 years, 1 month ago
- b147bd3 sunxi: Enable watchdog timer support by default by Samuel Holland · 3 years, 3 months ago
- a3010bc sunxi: Select SPL_SEPARATE_BSS by Samuel Holland · 3 years, 3 months ago
- 2ea6327 board: arm: Remove OF_PRIOR_STAGE from the remaining Arm boards by Ilias Apalodimas · 3 years, 2 months ago
- f9437b0 sunxi: Enable DM_I2C for all sunxi boards by Samuel Holland · 3 years, 2 months ago
- 8ba5960 arm: Remove zmx25 board and ARCH_MX25 by Tom Rini · 3 years, 3 months ago
- d9be860 arm: Remove aspenite board by Tom Rini · 3 years, 3 months ago
- 14b38cb arm: Remove flea3 board by Tom Rini · 3 years, 2 months ago
- 15e3010 ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU. by Kristian Amlie · 3 years, 3 months ago
- 4e062fc arm64: Kconfig: Enable usage of optimized memset/memcpy/memmove by Stefan Roese · 3 years, 3 months ago
- 270f871 crc32: Add crc32 implementation using __builtin_aarch64_crc32b by Marek Vasut · 3 years, 3 months ago
- 6674eda Merge tag 'v2021.10-rc4' into next by Tom Rini · 3 years, 2 months ago
- 3232bdf pci: Drop DM_PCI by Simon Glass · 3 years, 4 months ago
- 87e8d38 arm: Add Kconfig entry for MACH_TYPE by Tom Rini · 3 years, 3 months ago
- 9774462 arm: Disable ATAGs support by Tom Rini · 3 years, 3 months ago
- ea2ca7e spi: Rename SPI_SUPPORT to SPI by Simon Glass · 3 years, 4 months ago
- 2a73606 serial: Rename SERIAL_SUPPORT to SERIAL by Simon Glass · 3 years, 4 months ago
- 103c5f1 mmc: Rename MMC_SUPPORT to MMC by Simon Glass · 3 years, 4 months ago
- 0017931 Revert most of the series for adding vexpress_aemv8r support by Tom Rini · 3 years, 3 months ago
- b53bbca vexpress64: Add BASER_FVP vexpress board variant by Peter Hoyes · 3 years, 3 months ago
- cd82f19 armv7: Add Position Independent Execution support by Chia-Wei Wang · 3 years, 4 months ago
- aa29b21 arm: Fix option dependency with Kconfig language by Chia-Wei Wang · 3 years, 4 months ago
- 8956854 arm: u8500: Prefer building in thumb mode by default by Stephan Gerhold · 3 years, 4 months ago
- 9f78ccf arm: u8500: Imply options for new drivers by Stephan Gerhold · 3 years, 4 months ago
- b4c2c15 Kconfig: Remove all default n/no options by Michal Simek · 3 years, 3 months ago
- ab92b38 Finish converting CONFIG_SYS_CACHELINE_SIZE to Kconfig by Tom Rini · 3 years, 3 months ago
- 0c2729e imx: Introduce CONFIG_MACH_IMX by Tom Rini · 3 years, 3 months ago
- 222d22a ddr: Migrate DDR_SPD to Kconfig by Tom Rini · 3 years, 3 months ago
- 5afdcca arm: Migrate GICV2 / GICV3 to Kconfig by Tom Rini · 3 years, 3 months ago
- 15e7b76 Convert CONFIG_SYS_I2C_MXC et al to Kconfig by Tom Rini · 3 years, 3 months ago
- b9cb74a Merge tag 'xilinx-for-v2021.10-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 3 years, 3 months ago
- 42e20f5 soc: xilinx: versal: Add soc_xilinx_versal driver by T Karthik Reddy · 3 years, 4 months ago
- a890a53 soc: xilinx: zynqmp: Add soc_xilinx_zynqmp driver by T Karthik Reddy · 3 years, 4 months ago
- 475bb94 rockchip: Fix u-boot-rockchip.bin build by Johan Gunnarsson · 3 years, 4 months ago
- 19b990b arm: imx: add i.MX8ULP basic Kconfig option by Peng Fan · 3 years, 4 months ago
- b91c704 Merge https://source.denx.de/u-boot/custodians/u-boot-samsung by Tom Rini · 3 years, 4 months ago
- 83061db Rename GPIO_SUPPORT to GPIO by Simon Glass · 3 years, 5 months ago
- 078111b Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOG by Simon Glass · 3 years, 5 months ago
- 933b2f0 Rename SPL_POWER_SUPPORT to SPL_POWER by Simon Glass · 3 years, 5 months ago
- 5e19f4a samsung: exynos: Convert SROMC interface to a driver by Simon Glass · 3 years, 4 months ago
- be5c060 usb: Enforce DM_USB migration for USB_HOST devices. by Tom Rini · 3 years, 5 months ago
- 570c3dc arm: Remove spear600 boards and the rest of SPEAr support by Tom Rini · 3 years, 6 months ago
- d7221d0 arm: Remove spear320 boards by Tom Rini · 3 years, 6 months ago
- 1dc77c2 arm: Remove spear310 boards by Tom Rini · 3 years, 6 months ago
- 0e377bb arm: Remove spear300 boards by Tom Rini · 3 years, 6 months ago
- dee08b1 arm: Remove gplugd board by Tom Rini · 3 years, 6 months ago
- bc08dc5 arm: Remove edb9315a board by Tom Rini · 3 years, 6 months ago
- 5cd4a35 board: synquacer: Add DeveloperBox 96boards EE support by Masami Hiramatsu · 3 years, 6 months ago
- 7a67205 gpio: Introduce CONFIG_GPIO_EXTRA_HEADER to cleanup #ifdefs by Masami Hiramatsu · 3 years, 6 months ago
- a298d4f Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 3 years, 5 months ago
- a7fd6fa board/km: add support for expu1 design based on nxp by Aleksandar Gerasimovski · 3 years, 6 months ago
- a3a0bc8 imx: Add SeeedStudio NPI-IMX6ULL Support by Navin Sankar Velliangiri · 3 years, 6 months ago
- 1238d01 arm: highbank: Do DRAM init from DT by Andre Przywara · 3 years, 8 months ago
- debb07b net: calxedagmac: Convert to DM_ETH by Andre Przywara · 3 years, 8 months ago
- 109552d arm: highbank: Enable OF_CONTROL by Andre Przywara · 3 years, 8 months ago
- 504f864 arch: arm: update Kconfig to select IRQ when GIC_V3_ITS is enabled by Wasim Khan · 3 years, 9 months ago
- 6d1ab4a board: sl28: enable DM_SERIAL by Michael Walle · 3 years, 8 months ago
- 356a338 board: sl28: move DM_* configs to Kconfig by Michael Walle · 3 years, 8 months ago
- 91ee547 board/km: add support for seli8 design based on nxp ls102x by Aleksandar Gerasimovski · 3 years, 9 months ago
- da42646 arm: Remove Broadcom Cygnus boards by Tom Rini · 3 years, 9 months ago