1. 38b4a3e musb: sunxi: Do not allocate musb struct multiple times by Hans de Goede · 9 years ago
  2. cf12547 usb: bcm_udc_otg: enable clocks by Steve Rae · 9 years ago
  3. 47435e5 drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type by Sriram Dash · 9 years ago
  4. b9f6786 drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller by Sriram Dash · 9 years ago
  5. 469e72b drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type by Sriram Dash · 9 years ago
  6. 93eb8f3 drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file by Sriram Dash · 9 years ago
  7. 9a80e71 usb: kbd: Do not deregister usbkbd twice when using dm by Hans de Goede · 9 years ago
  8. cfb3f1c usb: ehci-hcd: Fix crash when no ops are provided to ehci_register() by Mateusz Kulikowski · 9 years ago
  9. ac7eef7 board: pic32mzda: enable USB-host, USB-storage support. by Purna Chandra Mandal · 9 years ago
  10. 03b8e04 drivers: musb-new: Add USB DRC driver for Microchip PIC32 OTG controller. by Purna Chandra Mandal · 9 years ago
  11. 6d94810 drivers: remove writes{b,w,l,q} and reads{b,w,l,q}. by Purna Chandra Mandal · 9 years ago
  12. f968467 arm: add missing writes[bwql], reads[bwql]. by Purna Chandra Mandal · 9 years ago
  13. 43d3fb5 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  14. 3c1d218 armv8: LS2080A: Consolidate LS2080A and LS2085A by York Sun · 9 years ago
  15. 2a55583 armv8: ls1043a: load Fman ucode from SD/MMC under SD boot by Qianyu Gong · 9 years ago
  16. fd1b147 armv8: ls1043a: load Fman ucode from NAND flash under NAND boot by Qianyu Gong · 9 years ago
  17. 1b245d9 armv8/ls1043aqds: modify CONFIG_SYS_MAX_FLASH_BANKS to 1 by Wenbin Song · 9 years ago
  18. 9607789 arm: ls102xa: Fix order of CSU indexes in ns_access.h by Vincent Siles · 9 years ago
  19. 70e21b0 armv8: LSCH2 early and final mmu needs matching NS attribute by Ed Swarthout · 9 years ago
  20. ce96ba4 armv8: ls1043aqds: make sure fixed-link property is big endian by Shaohui Xie · 9 years ago
  21. 9101a68 drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only by Codrin Ciubotariu · 9 years ago
  22. 02c00f2 drivers: net: vsc9953: Do not configure disabled ports by Codrin Ciubotariu · 9 years ago
  23. 5330c7d fsl: esdhc: consolidate fsl_esdhc_cfg structure by Peng Fan · 9 years ago
  24. 96f0407 fsl: esdhc: support driver model by Peng Fan · 9 years ago
  25. 46a16bd kirkwood_nand: claim MPP pins on the fly by Chris Packham · 9 years ago
  26. 9fc5663 spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU by Stefan Roese · 9 years ago
  27. 4ed6ed3 Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  28. 07654ba ARM64: zynqmp: Enable EFI partition support by Michal Simek · 9 years ago
  29. 845ee5f net: zynq_gem: Add SGMII support for zynqMP by Siva Durga Prasad Paladugu · 9 years ago
  30. 85b949f net: phy: Add SGMII support for TI phy by Siva Durga Prasad Paladugu · 9 years ago
  31. e76d2dc net: zynq_gem: Return error incase of invalid phy address by Siva Durga Prasad Paladugu · 9 years ago
  32. 4d1ed9c ARM: zynq: Add uEnv.txt support by Michal Simek · 9 years ago
  33. 26ae920 ARM: zynq: Enable FLASH_BAR for microzed and zybo by Michal Simek · 9 years ago
  34. 679b994 block: Add support for Ceva sata by Michal Simek · 9 years ago
  35. 6d3ddfc ARM64: zynqmp: Simplify MAINTAINERS file to support more boards by Michal Simek · 9 years ago
  36. 8d59d7f ARM64: zynqmp: Read RAM information from DT by Michal Simek · 9 years ago
  37. a3afb4a ARM64: Move HUSH enabling from board file to defconfig by Michal Simek · 9 years ago
  38. a1108da ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig by Michal Simek · 9 years ago
  39. 46f68e6 ARM64: zynqmp: Enable FAT write and EXT4 write for USB too by Michal Simek · 9 years ago
  40. 5cfd918 ARM64: zynqmp: Decrease boot delay by Soren Brinkmann · 9 years ago
  41. ceb04e1 net: axi_emac: Report phy-node error message permanently by Michal Simek · 9 years ago
  42. a359eaa microblaze: Remove !OF_CONTROL code for timer and interrupt by Michal Simek · 9 years ago
  43. 9aa65ca microblaze: Read information about timer/interrupts from DT by Michal Simek · 9 years ago
  44. 66de226 ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO by Michal Simek · 9 years ago
  45. 996503e ARM: zynq: zybo: Enabling reading MAC address from EEPROM by Michal Simek · 9 years ago
  46. a509a1d net: gem: Allow to set the MAC from an EEPROM by Joe Hershberger · 9 years ago
  47. b7b3efe ARM: zynq: Enable option to overwrite default variables by Michal Simek · 9 years ago
  48. 8964f24 net: xilinx_axi: Clear Isolate bit if found during phy setup by Siva Durga Prasad Paladugu · 9 years ago
  49. 9c0da76 net: xilinx_axi: Use interface type instead of zero by Siva Durga Prasad Paladugu · 9 years ago
  50. 217185b zynq-common: Enable phy driver for Xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  51. a06c341 net: zynq_gem: Add support for SGMII interface by Siva Durga Prasad Paladugu · 9 years ago
  52. ed6fad3 phy: Add phy driver support for xilinx PCS/PMA core by Siva Durga Prasad Paladugu · 9 years ago
  53. 7e10a7c Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 9 years ago
  54. 30eae26 common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE by Stefan Roese · 9 years ago
  55. ebe7890 arm: mvebu: Don't enable d-cache on A375 by Stefan Roese · 9 years ago
  56. 606576d arm: mvebu: Add basic support for Armada 375 eval board db-88f6720 by Stefan Roese · 9 years ago
  57. 09e89ab arm: mvebu: Add basic support for the Marvell Armada 375 SoC by Stefan Roese · 9 years ago
  58. 0b45a79 dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4 by Stefan Roese · 9 years ago
  59. 99d4c6d net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375 by Stefan Roese · 9 years ago
  60. 951f1b5 spi: kirkwood_spi.c: Add compatible match ID for Armada 375 by Stefan Roese · 9 years ago
  61. 563d8d9 net: phy: Realtek RTL8211B/C PHY ID fix by Karsten Merker · 9 years ago
  62. 3ef9cdb MAINTAINERS: Update Scott Wood's email address by Scott Wood · 9 years ago
  63. 96baf36 sata: use block layer for sata command by Eric Nelson · 9 years ago
  64. bcfde7f mmc: use block layer in mmc command by Eric Nelson · 9 years ago
  65. e40cf34 drivers: block: add block device cache by Eric Nelson · 9 years ago
  66. e721e98 Add myself as Snapdragon and SPMI maintainer by Mateusz Kulikowski · 9 years ago
  67. 626f048 board: Add Qualcomm Dragonboard 410C support by Mateusz Kulikowski · 9 years ago
  68. 0859213 arm: Add support for Qualcomm Snapdragon family by Mateusz Kulikowski · 9 years ago
  69. 120800d gpio: Add support for Qualcomm PM8916 gpios by Mateusz Kulikowski · 9 years ago
  70. c2f74c8 pmic: Add support for Qualcomm PM8916 PMIC by Mateusz Kulikowski · 9 years ago
  71. 5b47271 drivers: spmi: Add support for Qualcomm SPMI bus driver by Mateusz Kulikowski · 9 years ago
  72. d33776e spmi: Add sandbox test driver by Mateusz Kulikowski · 9 years ago
  73. 04868b4 drivers: Add SPMI bus uclass by Mateusz Kulikowski · 9 years ago
  74. 5a82211 ehci: Add support for Qualcomm EHCI by Mateusz Kulikowski · 9 years ago
  75. d144f96 ehci-ci.h: drop generic USBCMD fields by Mateusz Kulikowski · 9 years ago
  76. d424efb usb: ehci-ci: Add missing registers. by Mateusz Kulikowski · 9 years ago
  77. e162c6b usb: Rename ehci-fsl.h to ehci-ci.h by Mateusz Kulikowski · 9 years ago
  78. 64160a5 eth: asix88179: Print packet length properly by Mateusz Kulikowski · 9 years ago
  79. d3d844f usb: ulpi: Fix compile warning in read/write on 64-bit machines. by Mateusz Kulikowski · 9 years ago
  80. 2cbe57c usb: ulpi: Fix viewport_addr type by Mateusz Kulikowski · 9 years ago
  81. 5493a32 Migrate CONFIG_ULPI* to Kconfig by Mateusz Kulikowski · 9 years ago
  82. 6b14fbb usb: ulpi: Add Kconfig options for ULPI by Mateusz Kulikowski · 9 years ago
  83. 3f9f8a5 ehci-hcd: Add init_after_reset by Mateusz Kulikowski · 9 years ago
  84. 9d11d12 mmc: Add support for Qualcomm SDHCI controller by Mateusz Kulikowski · 9 years ago
  85. 81a87e1 gpio: Add support for Qualcomm gpio controller by Mateusz Kulikowski · 9 years ago
  86. 142a20c serial: Add support for Qualcomm serial port by Mateusz Kulikowski · 9 years ago
  87. 39fbac9 board: ti: DRA7: Add DP83867 TI phy for rev c by Dan Murphy · 9 years ago
  88. 38ce65e efi_loader: Always allocate the highest available address by Alexander Graf · 9 years ago
  89. 41582e2 sniper: Change vendor name from lge to lg, matching devicetree vendor prefix by Paul Kocialkowski · 9 years ago
  90. 523849a kc1: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  91. c15ab5b sniper: Proper reboot mode and boot reason validation by Paul Kocialkowski · 9 years ago
  92. 44b0cf4 kc1: Add some sysboot and devicetree-related environment variables by Paul Kocialkowski · 9 years ago
  93. 163d876 kc1: Select libfdt to allow running devicetree-based kernels by Paul Kocialkowski · 9 years ago
  94. f5fdc37 kc1: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  95. 5fcbca5 sniper: Include explicit serial baudrate on bootargs by Paul Kocialkowski · 9 years ago
  96. 62022d5 arm64: booti: add missing unmap_sysmem() by Masahiro Yamada · 9 years ago
  97. 27ce696 configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time by Vitaly Andrianov · 9 years ago
  98. f00169a arm: spl: Align default board_init_f comment with code by Andreas Dannenberg · 9 years ago
  99. 9d906bf post: Remove references to scrapped "netta" board. by Robert P. J. Day · 9 years ago
  100. 9a5d993 common: env_sf: Add exclamation mark by Peng Fan · 9 years ago