- 4849d95 board: ti: K2G FC SoC 1GHz and DDR3 1066 MT/s support by Rex Chang · 7 years ago
- e36edce board: ti: dra7xx: Select MCAN instead of DCAN on DRA76 EVM by Vignesh R · 7 years ago
- 836e67e ARM: omap3: evm: Refactor 'board_eth_init' by Derald D. Woods · 7 years ago
- 6ae3900 mtd: nand: Rename nand.h into rawnand.h by Masahiro Yamada · 7 years ago
- 883946e usb: hub: identify the hub-device to usb_hub_reset_devices by Philipp Tomsich · 7 years ago
- 5ad1fec TI: am57xx; Remove am57xx_evm_nodt_defconfig by Tom Rini · 7 years ago
- 9ecdf30 board: ti: dra71x-evm: Hook LDO1 of LP8733 to EN_PIN by Keerthy · 7 years ago
- 08019cc omap4: sdp4430: match the #endif comment to #ifdef by Masahiro Yamada · 7 years ago
- 1195559 dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts Kconfig by Jean-Jacques Hiblot · 7 years ago
- ba39608 ARM: DRA72x: Add support for detection of DRA71x SR 2.1 by Vishal Mahaveer · 7 years ago
- 58fac52 ARM: k2g: Add FIT image handler for PMMC firmware by Andrew F. Davis · 7 years ago
- 8b2551a board: ti: am57xx: Add dt support for BeagleBoard-X15 revC by Lokesh Vutla · 7 years ago
- 209742f board: ti: am571x: Add 666MHz support for AM571x IDK by Steve Kipisz · 7 years ago
- fede942 board: ti: dra76: Add dt support by Lokesh Vutla · 7 years ago
- cd43b51 board: ti: dra76-evm: Add support for powering on mmc ldo by Lokesh Vutla · 7 years ago
- 9120ef0 board: ti: dra76-evm: Add the pinmux data by Lokesh Vutla · 7 years ago
- c9a7c17 board: ti: dra76-evm: Add DDR data by Lokesh Vutla · 7 years ago
- c247605 board: ti: dra76-evm: Add the pmic data by Keerthy · 7 years ago
- c8c04ec board: ti: dra76-evm: Add epprom support by Lokesh Vutla · 7 years ago
- db4fce8 palmas: Add support for powering different ldos by Lokesh Vutla · 7 years ago
- 91d3e90 arm: omap5+: Add board specific ldo powering by Lokesh Vutla · 7 years ago
- c257c96 omap3: evm: Fixes for CONFIG_NAND, SPL_OS_BOOT, USB, and environment by Derald D. Woods · 7 years ago
- 35affd7 env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr() by Simon Glass · 7 years ago
- bfebc8c env: Rename getenv_hex(), getenv_yesno(), getenv_ulong() by Simon Glass · 7 years ago
- 00caae6 env: Rename getenv/_f() to env_get() by Simon Glass · 7 years ago
- fd1e959 env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr() by Simon Glass · 7 years ago
- 382bee5 env: Rename setenv() to env_set() by Simon Glass · 7 years ago
- 310fb14 env: Drop env_relocate_spec() in favour of env_load() by Simon Glass · 7 years ago
- c1c3fe2 env: Convert CONFIG_ENV_IS_IN... to a choice by Simon Glass · 7 years ago
- 0d43fde omap3: evm: Update board, defconfig, and maintainer file by Derald D. Woods · 7 years ago
- b7695c0 board: ks2: README: Update NAND wording by Cooper Jr., Franklin · 7 years ago
- 94d50be Configs: Migrate CONFIG_SYS_I2C_OMAP34XX to CONFIG_SYS_I2C_OMAP24XX by Adam Ford · 7 years ago
- c826d17 ti: Default to ENV_IS_IN_FAT if MMC_OMAP_HS by Tom Rini · 7 years ago
- f70a427 board: ti: x15: Add support for beagle_X15 revC by Lokesh Vutla · 7 years ago
- 7087922 board: ti: am57xx: Fix detection of board version by Lokesh Vutla · 7 years ago
- 7fe463f board: ti: am43xx: Add FDT fixup for HS devices by Andrew F. Davis · 7 years ago
- 3630094 board: ti: am43xx: Add TEE loading and firewall setup by Andrew F. Davis · 7 years ago
- bc42096 ARM: k2g: Add K2G ICE DTB to the list of possible DTBs by Cooper Jr., Franklin · 7 years ago
- 92761fc ARM: k2g: Update board_name u-boot env variable at runtime by Cooper Jr., Franklin · 7 years ago
- 4f49040 ARM: k2g: Use board detection to wrap K2G GP specific calls by Cooper Jr., Franklin · 7 years ago
- e66a5da board: ks2: Use board detection to wrap code not specific to K2G ICE evm by Cooper Jr., Franklin · 7 years ago
- 652606e ARM: k2g: Add DDR3 configuration for K2G ICE evm by Cooper Jr., Franklin · 7 years ago
- b9b342e ARM: k2g: Add pinmux support for K2G ICE evm by Cooper Jr., Franklin · 7 years ago
- e6e2435 ks2_evm: Add EEPROM based board detection helper functions by Cooper Jr., Franklin · 7 years ago
- e5e546a ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables by Cooper Jr., Franklin · 7 years ago
- a76a6f3 ARM: k2g: Program DDR PHY MR2 register with the default value by Cooper Jr., Franklin · 7 years ago
- e820f52 ks2_evm: Add EEPROM based board detection by Cooper Jr., Franklin · 7 years ago
- 7234f21 ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards by Cooper Jr., Franklin · 7 years ago
- 5f48da9 ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot by Cooper Jr., Franklin · 7 years ago
- 69e8d4b ti: common: board_detect: Add function to determine if EEPROM was read by Cooper Jr., Franklin · 7 years ago
- e936f99 ti: common: board_detect: Allow settings board detection variables manually by Nishanth Menon · 7 years ago
- de82036 ti816x: Enable ethernet support by Tom Rini · 8 years ago
- 51855e8 treewide: remove unneeded semicolons by Masahiro Yamada · 7 years ago
- 9f7923c board: ti: am335x: Fix scale_vcore for beaglebones by Lokesh Vutla · 7 years ago
- 4a30a93 arm: dra7: Set fastboot variables in environment by Semen Protsenko · 7 years ago
- 8bd2962 arm: am57xx: Set fastboot variables in environment by Semen Protsenko · 7 years ago
- 75fd49c Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · 7 years ago
- d9e1467 board: ti: am572x-evm: Update pinmux using latest PMT by Lokesh Vutla · 7 years ago
- 2d7e9e9 board: ti: am571x-idk: Update pinmux using latest PMT by Lokesh Vutla · 7 years ago
- e79d2dc board: ti: am572x-idk: Update pinmux using latest PMT by Lokesh Vutla · 7 years ago
- 00bbe96 arm: omap: Unify get_device_type() function by Semen Protsenko · 7 years ago
- fc69d47 board: ti: AM43XX: Add ddr voltage rail configuration by Keerthy · 7 years ago
- b12550e board: ti: am571-idx: Add vcores support by Keerthy · 7 years ago
- 9cb5eaf ARM: k2g: Fix passing main pll info for higher speeds by Lokesh Vutla · 8 years ago
- c62db35 arm: Add explicit include of <asm/mach-types.h> by Simon Glass · 7 years ago
- 1d7f6ad ti816x: Modernize the defconfig by Tom Rini · 8 years ago
- 77e9927 ti816x: Enable NAND by Tom Rini · 8 years ago
- 8627733 ti816x: Rework DDR initialization sequence by Tom Rini · 8 years ago
- 4a72d8d board: ti: enable support for writing to fat partition by Sekhar Nori · 7 years ago
- 221a949 Kconfig: Finish migration of hashing commands by Daniel Thompson · 8 years ago
- a1dc980 Convert CONFIG_CMD_EEPROM et al to Kconfig by Simon Glass · 8 years ago
- 4125bbc Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · 8 years ago
- cb33bda Merge branch 'master' of git://git.denx.de/u-boot-i2c by Tom Rini · 8 years ago
- 8850c5d Kconfig: USB: Migrate CONFIG_USB_EHCI to CONFIG_USB_EHCI_HCD by Tom Rini · 8 years ago
- 4aa2ba3 mmc: replace CONFIG_GENERIC_MMC with CONFIG_MMC by Masahiro Yamada · 8 years ago
- 64a144d i2c: omap: Modify code to work without CONFIG_I2C_HARD by Simon Glass · 8 years ago
- fbd6295 arm: am33xx: Add support for mulitiple PLL input frequencies by Lokesh Vutla · 8 years ago
- 0650798 board: am335x: Introduce scale_vcores by Lokesh Vutla · 8 years ago
- 4548bc8 am33xx: Provide platform data for mmc by Lokesh Vutla · 8 years ago
- e25ae32 ti: common: board_detect: Set alen to expected value before i2c read by Cooper Jr., Franklin · 8 years ago
- c6b80b1 ti: common: board_detect: Introduce function to set the address length. by Cooper Jr., Franklin · 8 years ago
- ee3c653 ARM: keystone2: Add support for getting external clock dynamically by Lokesh Vutla · 8 years ago
- c5f177d ARM: k2g: Add support for dynamic programming of PLL based on SYSCLK by Lokesh Vutla · 8 years ago
- 690485e board: ti: Define Kconfig symbol for common cmd options by Lokesh Vutla · 8 years ago
- 1a9a5f7 usb: host: xhci-omap: fix double weak board_usb_init functions by Uri Mashiach · 8 years ago
- ac60e46 Convert CONFIG_CMD_BAT to Kconfig by Simon Glass · 8 years ago
- 6cc96bc board: dra71: Fix selection of OPPs by Lokesh Vutla · 8 years ago
- 52609d7 config: am335x_evm: detect BeagleBone Blue using BLA by robertcnelson@gmail.com · 8 years ago
- 2b79fba config: am335x_evm: detect Green Wireless using GW1 by robertcnelson@gmail.com · 8 years ago
- 4015949 config: am335x_evm: detect Black Wireless using BWA by robertcnelson@gmail.com · 8 years ago
- 411278b board: ti: am57xx: enable input on mmc clock by Sekhar Nori · 8 years ago
- 76b00ac board_f: Drop setup_dram_config() wrapper by Simon Glass · 8 years ago
- 752a831 ARM: k2g: setup PRU ethernet MAC addresses by Roger Quadros · 8 years ago
- 66e04fb ARM: Use Kconfig for board EEPROM's I2C bus and chip address by Roger Quadros · 8 years ago
- fcb1852 board: ti: am57xx-idk: Auto detect LCD Panel by Nishanth Menon · 8 years ago
- 6291012 board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet by Roger Quadros · 8 years ago
- 3761105 board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD by Roger Quadros · 8 years ago
- 38f719e ti: common: board_detect: commodify ethaddr environment setting code by Roger Quadros · 8 years ago
- 6398928 ti: common: board_detect: Rename EEPROM scratch start macro by Lokesh Vutla · 8 years ago
- d5abcf9 ti: boot: Register the MMC controllers in SPL in the same way as in u-boot by Jean-Jacques Hiblot · 8 years ago