1. 3c963d4 ARM: uniphier: disable debug circuit clocks for PH1-Pro4 by Masahiro Yamada · 9 years ago
  2. 00dd3f6 ARM: uniphier: remove UMC_INITCTL* and UMC_DRMR* settings by Masahiro Yamada · 9 years ago
  3. 94b756f ARM: uniphier: refactor UMC init code for ProXstream2 by Masahiro Yamada · 9 years ago
  4. a54c879 ARM: uniphier: use pr_err() where possible by Masahiro Yamada · 9 years ago
  5. 59fe23c ARM: uniphier: optimize ProXstream2 UMC init code with "for" loop by Masahiro Yamada · 9 years ago
  6. 46abfcc ARM: uniphier: rework struct uniphier_board_data by Masahiro Yamada · 9 years ago
  7. 8353266 ARM: uniphier: remove unused umc_polling() by Masahiro Yamada · 9 years ago
  8. aa8a934 ARM: uniphier: default to environment in eMMC by Masahiro Yamada · 9 years ago
  9. 569e4be ARM: uniphier: add a command to find the first MMC (non-SD) device by Masahiro Yamada · 9 years ago
  10. a55d9fe ARM: uniphier: add eMMC boot support by Masahiro Yamada · 9 years ago
  11. c7f94ee ARM: dts: uniphier: add SD/MMC host controller nodes by Masahiro Yamada · 9 years ago
  12. 4aceb3f ARM: uniphier: enable UniPhier SD/MMC host driver by Masahiro Yamada · 9 years ago
  13. 595dc1e ARM: dts: uniphier: add GPIO controller nodes by Masahiro Yamada · 9 years ago
  14. b800cbd ARM: uniphier: enable GPIO command and driver for UniPhier SoCs by Masahiro Yamada · 9 years ago
  15. f8facbe gpio: do not include <asm/arch/gpio.h> for UniPhier by Masahiro Yamada · 9 years ago
  16. 0f5fb8c ARM: dts: uniphier: rework System Bus nodes by Masahiro Yamada · 9 years ago
  17. cdb714d Merge branch 'master' of git://git.denx.de/u-boot-socfpga by Tom Rini · 9 years ago
  18. e1417c7 Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq by Tom Rini · 9 years ago
  19. 20434c8 microblaze: Add missing chosen node by Michal Simek · 9 years ago
  20. 757cd14 rpi: set board serial number in environment by Lubomir Rintel · 9 years ago
  21. e66c49f stm32: add support for stm32f7 & stm32f746 discovery board by Vikas Manocha · 9 years ago
  22. 09959ba gpio: stm32_gpio: move base addresses to the soc file by Vikas Manocha · 9 years ago
  23. 14cec06 gpio: stm32_gpio: move clock config from driver to board by Vikas Manocha · 9 years ago
  24. e6e34ca arm: socfpga: Fix ethernet reset handling by Marek Vasut · 9 years ago
  25. 80da866 arm: socfpga: Remove bashisms from qts filter by Marek Vasut · 9 years ago
  26. 755ff3a arm: socfpga: cv_socdk: Add support for QSPI boot by Marek Vasut · 9 years ago
  27. a1d4e96 arm: socfpga: av_socdk: Add support for QSPI boot by Marek Vasut · 9 years ago
  28. a08b192 armv7: ls102xa: Move smmu and stream id initialization into the common soc code by Alison Wang · 9 years ago
  29. 0e52b6f armv8/fsl-layerscape: fdt: add fixup for Fman ucode by Qianyu Gong · 9 years ago
  30. 075affb fm: fdt: Move fman ucode fixup to driver code by Qianyu Gong · 9 years ago
  31. 2459afb qe: move drivers/qe/qe.h to include/fsl_qe.h by Qianyu Gong · 9 years ago
  32. bbc8e05 armv8/ls1043a: Implement workaround for erratum A009660 by Mingkai Hu · 9 years ago
  33. 3e0a0fb armv8/ls1043a: enable workaround for errarum A009942 by Shengzhou Liu · 9 years ago
  34. f698e9f powerpc/SECURE_BOOT: Add PAMU driver by Aneesh Bansal · 9 years ago
  35. 2f7d700 arm: ls1021aqds: Enable driver model lpuart serial driver by York Sun · 9 years ago
  36. 52dd704 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  37. dc44fd8 sunxi: H3: Add support for the host usb-phys by Jelle van der Waa · 9 years ago
  38. d83b47b arm: ls1021aqds: Convert to driver model and enable serial support by York Sun · 9 years ago
  39. baec7df ARM: zynq: Add reset-gpio property for USB on Zybo by Michal Simek · 9 years ago
  40. cb204a6 ARM: zynq: Enable u-boot,dm-pre-reloc for qspi by Nathan Rossi · 9 years ago
  41. e832a14 ARM: zynq: Remove unused SPI base addresses by Michal Simek · 9 years ago
  42. 595af9d Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 9 years ago
  43. 35c4ce5 imx: mx7d: isolate resources to domain 0 for A7 core by Peng Fan · 9 years ago
  44. 83703a1 imx: mx7: implement functions to boot auxiliary core by Peng Fan · 9 years ago
  45. 0623d37 imx: mx6: implement functions to boot auxiliary core by Peng Fan · 9 years ago
  46. 6f6058b imx: imx-common: introduce boot auxiliary core by Peng Fan · 9 years ago
  47. 677656b imx: mx7d: clock support for RDC by Peng Fan · 9 years ago
  48. af01359 imx: mx7d: Add RDC support by Peng Fan · 9 years ago
  49. d08607e imx: mx6sx Add RDC mappings of masters and peripherals by Peng Fan · 9 years ago
  50. de09c43 imx: imx-common: introduce Resource Domain Controller support by Peng Fan · 9 years ago
  51. 613e010 imx: mx6: introduce rdc regs by Peng Fan · 9 years ago
  52. 1a43dc1 imx: mx6: Implement mmc_get_env_part by Soeren Moch · 9 years ago
  53. f91e65a imx: Refactoring CAAM Job Ring structure and Secure Memory for imx7 by Ulises Cardenas · 9 years ago
  54. a2e3b05 x86: Add Intel Cougar Canyon 2 board by Bin Meng · 9 years ago
  55. 87077e9 x86: ivybridge: bd82x6x: Support FSP enabled configuration by Bin Meng · 9 years ago
  56. dc5be50 x86: fsp: Make sure HOB list is not overwritten by U-Boot by Bin Meng · 9 years ago
  57. 4374139 x86: ivybridge: Add FSP support by Bin Meng · 9 years ago
  58. 4fd64d0 x86: fix memalign() parameter order by Stephen Warren · 9 years ago
  59. 20680b5 Merge branch 'master' of git://git.denx.de/u-boot-atmel by Tom Rini · 9 years ago
  60. db6ce23 arc: cache - utilize IO coherency (AKA IOC) engine by Alexey Brodkin · 9 years ago
  61. 379b328 arc: cache - accommodate different L1 cache line lengths by Alexey Brodkin · 9 years ago
  62. 522e4fb ARM: Add Support for the VInCo platform by Gregory CLEMENT · 9 years ago
  63. f7cf291 ARM: at91: sama5d2: configure the L2 cache memory by Samuel Mescoff · 9 years ago
  64. c21c28b arm: at91: Add support for DENX MA5D4 SoM and EVK by Marek Vasut · 9 years ago
  65. c43a72e ARM: at91: clean up the PMC_PLLICPR init code by Wenyou Yang · 9 years ago
  66. c0b868c ARM: at91: clock: add PMC_PLLICPR init function by Wenyou Yang · 9 years ago
  67. be5e485 ARM: at91: clock: add PLLB enable/disable functions by Wenyou Yang · 9 years ago
  68. db5c102 ARM: at91: armv7: clean up UTMI PLL handle code by Wenyou Yang · 9 years ago
  69. 1e70b37 ARM: at91: clock: add UTMI PLL enable/disable function by Wenyou Yang · 9 years ago
  70. eced5a7 ARM: cpu: at91: clean up peripheral clock code by Wenyou Yang · 9 years ago
  71. 41bf25c ARM: at91: clock: add a new file to handle clock by Wenyou Yang · 9 years ago
  72. e5322df ARM: at91: asm/at91_pmc.h: fix trival register offset by Wenyou Yang · 9 years ago
  73. 5589bc2 ARM: tegra: enable USB device mode port on Dalmore by Stephen Warren · 9 years ago
  74. d6ef8a6 video: tegra: Correct a Kconfig warning with VIDCONSOLE_AS_LCD by Simon Glass · 9 years ago
  75. e007633 tegra: video: Clean up the old LCD/PWM driver code by Simon Glass · 9 years ago
  76. 91c08af tegra: video: Move LCD driver to use the DM PWM driver by Simon Glass · 9 years ago
  77. bfda037 tegra: video: Move LCD enums into the driver by Simon Glass · 9 years ago
  78. 9e6866d tegra: video: Convert tegra20 LCD driver to driver model by Simon Glass · 9 years ago
  79. ce0c474 tegra: video: Merge the two config structures together by Simon Glass · 9 years ago
  80. 71cafc3 tegra: video: Merge the display driver into one file by Simon Glass · 9 years ago
  81. ee7d755 tegra: dts: Sync tegra20.dtsi with Linux v4.4 by Simon Glass · 9 years ago
  82. d2f9065 tegra: video: Rename CONFIG_VIDEO_TEGRA to CONFIG_VIDEO_TEGRA20 by Simon Glass · 9 years ago
  83. 135a87e tegra: Allow CONFIG_DM_VIDEO to be used as well as CONFIG_LCD by Simon Glass · 9 years ago
  84. 3f2997a tegra: Allow driver model to be used for the PWM by Simon Glass · 9 years ago
  85. 4dd8115 tegra: lcd: Merge tegra124-lcd.c into display.c by Simon Glass · 9 years ago
  86. 7429b96 tegra: pwm: Add a driver for the tegra PWM by Simon Glass · 9 years ago
  87. 300e235 tegra: dts: Sync up nyan-big files with Linux by Simon Glass · 9 years ago
  88. f4abbee tegra: dts: Sync up the tegra124 device tree files with Linux by Simon Glass · 9 years ago
  89. 26275da arm: build some file(s) as ARM mode only by David Müller (ELSOFT AG) · 9 years ago
  90. 02499e4 arm: the ARM920T is THUMB capable, so select the appropriate ISA by David Müller (ELSOFT AG) · 9 years ago
  91. 03a3a8a arm: make sure board_init_r() is being called using the right mode (ARM / THUMB) by David Müller (ELSOFT AG) · 9 years ago
  92. 823ecd7 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  93. 3f23111 ARM: uniphier: add support for PH1-Pro4 Ace and Sanji boards by Masahiro Yamada · 9 years ago
  94. 500aaca ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board by Masahiro Yamada · 9 years ago
  95. a65256d ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board by Masahiro Yamada · 9 years ago
  96. f775c09 ARM: uniphier: adjust DDR clock delay line for ProXstream2 by Masahiro Yamada · 9 years ago
  97. c955289 ARM: uniphier: move cmd_ddrmphy.c to fix build error by Masahiro Yamada · 9 years ago
  98. 126f9ba ARM: uniphier: fix makefiles to build cmd_ddr(m)phy.c by Masahiro Yamada · 9 years ago
  99. 2851971 ARM: uniphier: remove unused header mio-regs.h by Masahiro Yamada · 9 years ago
  100. 8034b51 ARM: uniphier: drop unneeded EHCI pin mux settings by Masahiro Yamada · 9 years ago