1. 3f84108 arm, davinci: add workaround for not resetting DMA bus and VPSS modules by Heiko Schocher · 13 years ago
  2. f590217 OMAP SPL: Fix missing timer_init() call in OMAP4 s_init() by Dechesne, Nicolas · 13 years ago
  3. 8167af1 OMAP3: Add Corscience Tricorder board by Thomas Weber · 13 years ago
  4. 0ae0565 OMAP3: Correct get_sdr_cs_offset mask by Tom Rini · 13 years ago
  5. 223b8aa Beagleboard: Correct memory size on rev C4 by robertcnelson@gmail.com · 13 years ago
  6. 10f3bdd am3517evm: remove rootfstype kernel parameter for MMC boot device by Yegor Yefremov · 13 years ago
  7. 2047051 arm: omap3: Define save_boot_params in lowlevel_init.S for SPL only by Pali Rohár · 13 years ago
  8. d652a34 arm, davinci: add PLL0 prediv to da850 lowlevel setup by Ben Gardiner · 13 years ago
  9. bd29cb0 tegra2: Enable data cache by Simon Glass · 13 years ago
  10. 98450d0 tegra: mmc: Support operation with dcache enabled by Simon Glass · 13 years ago
  11. ca28090 tegra: Use funcmux for MMC on seaboard by Simon Glass · 13 years ago
  12. e712e54 tegra: Use funcmux for MMC on harmony by Simon Glass · 13 years ago
  13. f448302 tegra: Use funcmux for MMC on tamonten by Simon Glass · 13 years ago
  14. cf06b13 tegra: Add SDMMC support to funcmux by Simon Glass · 13 years ago
  15. 8a1133c tegra: Add I2C support to funcmux by Simon Glass · 13 years ago
  16. 2faf186 tegra: Add enum to select from available funcmux configs by Simon Glass · 13 years ago
  17. d693969 tegra: Adjust funcmux config test to permit expansion by Simon Glass · 13 years ago
  18. 2996e2d tegra2: Add support for Compal Paz00 (Toshiba AC100) by Stephen Warren · 13 years ago
  19. 9057e65 tegra2: Fix default RAM size selection in odmdata by Stephen Warren · 13 years ago
  20. 4850ab9 tegra2: Fix conflicting pinmux for UARTA by Stephen Warren · 13 years ago
  21. 9cbfee6 fw_env.h: fix comment by Frans Meulenbroeks · 13 years ago
  22. e3b3621 Merge branch 'master' of /home/wd/git/u-boot/custodians by Wolfgang Denk · 13 years ago
  23. 7100a54 Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash by Wolfgang Denk · 13 years ago
  24. f57a94c Merge branch 'master' of /home/wd/git/u-boot/custodians by Wolfgang Denk · 13 years ago
  25. 0990dc6 Merge branch 'master' of git://git.denx.de/u-boot-nand-flash by Wolfgang Denk · 13 years ago
  26. 6e4c1da Merge branch 'master' of /home/wd/git/u-boot/custodians by Wolfgang Denk · 13 years ago
  27. 5e72ef0 add STM29F400BB to table of supported legacy flashs by David Müller (ELSOFT AG) · 13 years ago
  28. a9f5fab * Fix: watchdog timed out, if flash blank (0xFF) blocks by Jens Scharsig (BuS Elektronik) · 13 years ago
  29. c178347 nand/fsl_elbc: Convert to self-init by Scott Wood · 13 years ago
  30. 578931b nand: Introduce CONFIG_SYS_NAND_SELF_INIT by Scott Wood · 13 years ago
  31. 25efd99 nand_spl: store ecc data on the stack by Scott Wood · 13 years ago
  32. 80519c8 mtd/nand: Add ONFI support for FSL NAND controller by Shengzhou Liu · 13 years ago
  33. 4fee6c2 nand: make 1-bit software ECC configurable by Christian Hitz · 13 years ago
  34. 5454ddb nand: Sanitize ONFI strings. by Christian Hitz · 13 years ago
  35. ff8a8a7 nand: Merge changes to BBT from Linux nand driver by Christian Hitz · 13 years ago
  36. 2a8e0fc nand: Merge changes from Linux nand driver by Christian Hitz · 13 years ago
  37. 90e3f39 nand: cleanup whitespace by Christian Hitz · 13 years ago
  38. 8c2d9c6 nand: Add more NAND types from Linux nand driver by Christian Hitz · 13 years ago
  39. 4c6de85 nand: Merge BCH code from Linux nand driver by Christian Hitz · 13 years ago
  40. 4d2aee2 NAND: Remove additional (CONFIG_SYS)_NAND_MAX_CHIPS by Scott Wood · 13 years ago
  41. 6bbb3e9 NAND: remove NAND_MAX_CHIPS definitions by Vladimir Zapolskiy · 13 years ago
  42. d3022c5 nand_spl_simple: store ecc data on the stack by Stefano Babic · 13 years ago
  43. b4116ed ARM: AM33XX: Add i2c support by Patil, Rachna · 13 years ago
  44. 498cbdf ARM: AM33XX: Add AM33XX I2C driver support by Patil, Rachna · 13 years ago
  45. 2faa761 ARM: I2C: I2C Multi byte address support by Patil, Rachna · 13 years ago
  46. b75190d README: update (C) entry by Wolfgang Denk · 13 years ago
  47. 137703b overo: add SPL support by Andreas Müller · 13 years ago
  48. 761ca31 omap_rev_string: output to stdout by Andreas Müller · 13 years ago
  49. 8775471 OMAP SPL: call timer_init in s_init to make udelay work earlier by Andreas Müller · 13 years ago
  50. 0b620ec drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM by Andreas Müller · 13 years ago
  51. 0f8d3eb include/configs/omap3_overo.h: several cleanups by Andreas Müller · 13 years ago
  52. bae485d board/overo/overo.c: replace printf with one argument by puts by Andreas Müller · 13 years ago
  53. 49e9b4b drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts by Andreas Müller · 13 years ago
  54. 8a8f084 ARM:AM33XX: Add SPL support for AM335X EVM by Chandan Nath · 13 years ago
  55. 876bdd6 ARM:AM33XX: Add mmc/sd support by Chandan Nath · 13 years ago
  56. 750b4bf ARM:AM33XX: Fixing AM335X config parameters by Chandan Nath · 13 years ago
  57. fb072a3 ARM:AM33XX: Fix ddr and timer register offset by Chandan Nath · 13 years ago
  58. f16da74 ARM:AM33XX: Replace CONFIG_AM335X with CONFIG_AM33XX by Chandan Nath · 13 years ago
  59. e4e2bf5 cm-t35: use the new EEPROM module to read the MAC address by Nikita Kiryanov · 13 years ago
  60. 7d3c97d cm-t35: pass correct revision information to Linux by Nikita Kiryanov · 13 years ago
  61. 715462d omap3: make get_board_rev() function weak by Nikita Kiryanov · 13 years ago
  62. 8230925 cm-t35: add EEPROM module and pass Linux a serial number by Nikita Kiryanov · 13 years ago
  63. ce15ec9 cm-t35: various cleanups by Nikita Kiryanov · 13 years ago
  64. 9fc376b cm-t35: cleanup the config file by Nikita Kiryanov · 13 years ago
  65. fe7104b omap4: fix boot issue on ES2.0 Panda by Aneesh V · 13 years ago
  66. 6cce550 beagle: add eeprom expansion board info for bct brettl3 by Peter Meerwald · 13 years ago
  67. 86887f8 ARMV7: Add support For Logic OMAP35x/DM37x modules by Peter Barada · 13 years ago
  68. a601bed arm, davinci: Change byte order of RTC kick register values by Christian Riesch · 13 years ago
  69. 1378cac OMAP3: Remove unused define CONFIG_OMAP3_*_DDR by Thomas Weber · 13 years ago
  70. 9452582 da850evm: Remove CONFIG_SYS_xxCACHE_OFF defines by Christian Riesch · 13 years ago
  71. 441ea7c arm, davinci: Use a common configuration file for da850evm and da850_am18xxevm by Christian Riesch · 13 years ago
  72. bc5833c i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board by Jason Liu · 13 years ago
  73. f2f7745 imx: mx6q: add aipstz init for off platform periph by Jason Liu · 13 years ago
  74. 8db9eff mx28: fix clearing of IRQs in power init by Zach Sadecki · 13 years ago
  75. c660a54 M28EVK: Fix build if CONFIG_CMD_NAND not selected by Marek Vasut · 13 years ago
  76. b0216fd m28evk: Remove 'all' target from Makefile by Fabio Estevam · 13 years ago
  77. 1084606 m28evk: Use GENERATED_GBL_DATA_SIZE by Fabio Estevam · 13 years ago
  78. d109ed9 mx28evk: Remove 'all' target from Makefile by Fabio Estevam · 13 years ago
  79. e364daf MX28: Fix MXSBOOT segfault if no params specified by Marek Vasut · 13 years ago
  80. bd2e27c i.mx6:imx6q: allign MAC address with burned-in ordering by Jason Liu · 13 years ago
  81. 29f75a5 mx28evk: Add initial support for MX28EVK board by Fabio Estevam · 13 years ago
  82. 5bcc6a8 mx28: Let dram_init be common for mx28 by Fabio Estevam · 13 years ago
  83. 5cb525f mx28: Let imx_get_mac_from_fuse be common for mx28 by Fabio Estevam · 13 years ago
  84. be252b6 net: imx: Add multi-FEC support for imx_get_mac_from_fuse by Fabio Estevam · 13 years ago
  85. 3c05789 i.mx6q: mx6qarm2: Enable the usboh3 clock by Eric Nelson · 13 years ago
  86. 00699f8 mx28: remove omap specific config options by Veli-Pekka Peltola · 13 years ago
  87. 473c635 i.mx6q: arm2: Add the enet function support by Jason Liu · 13 years ago
  88. 2ef2b95 fec: add the i.mx6q enet driver support by Jason Liu · 13 years ago
  89. ff167df i.mx: i.mx6q: Add the enet clock function by Jason Liu · 13 years ago
  90. f1f441a openrisc: Add MAINTAINERS entry by Stefan Kristiansson · 13 years ago
  91. deddf5d openrisc: Add architecture to MAKEALL by Stefan Kristiansson · 13 years ago
  92. f179cc6 openrisc: Add openrisc-generic example board by Stefan Kristiansson · 13 years ago
  93. 3553493 openrisc: Add support for standalone programs by Stefan Kristiansson · 13 years ago
  94. 2be9fdb openrisc: Add board info printout to cmd_bdinfo by Stefan Kristiansson · 13 years ago
  95. e0f1fd4 openrisc: Add library functions by Stefan Kristiansson · 13 years ago
  96. 272f84b openrisc: Add cpu files by Stefan Kristiansson · 13 years ago
  97. 3ddcacc openrisc: Add architecture image support by Stefan Kristiansson · 13 years ago
  98. ca9d3ab openrisc: Add architecture header files by Stefan Kristiansson · 13 years ago
  99. 30de101 Strip mkenvimage by David Wagner · 13 years ago
  100. 3e16abe post/Makefile: Only build FP post tests if enabled via CONFIG_SYS_POST_FPU by Kumar Gala · 13 years ago