Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 43486e4cd094eabdd514ed7a2376ca55655e506f
  1. 43486e4 board: arm:: Add support for Broadcom BCM23550 by Steve Rae · 8 years ago
  2. 1e03124 Merge branch 'master' of git://git.denx.de/u-boot-arc by Tom Rini · 8 years ago
  3. f4abfed Merge branch 'master' of git://git.denx.de/u-boot-ubi by Tom Rini · 8 years ago
  4. fd9102d Merge branch 'master' of git://git.denx.de/u-boot-atmel by Tom Rini · 8 years ago
  5. fc1e8fb axs103: Bump CPU frequency from 50MHz to 100MHz by Alexey Brodkin · 8 years ago
  6. 5bea2be arc: Update data accessors with use of memory barriers by Alexey Brodkin · 8 years ago
  7. c7d8db6 board: axs10x: Flush entire cache after programming reset vector by Alexey Brodkin · 8 years ago
  8. a4a43fc arc/cache: Flush & invalidate all caches right before enabling IOC by Alexey Brodkin · 8 years ago
  9. bd91508 arc/cache: really do invalidate_dcache_all() even if IOC exists by Alexey Brodkin · 8 years ago
  10. c1f51e0 common: env_ubi: Clear environment buffer before reading by Marcin Niestroj · 8 years ago
  11. a521428 Merge branch 'master' of git://git.denx.de/u-boot-uniphier by Tom Rini · 8 years ago
  12. 3865b9e autoboot: follow-up cleanup after CONFIG_BOOTDELAY moves by Masahiro Yamada · 8 years ago
  13. 2c15534 ARM: stm32: remove unused CONFIG_AUTOBOOT by Masahiro Yamada · 8 years ago
  14. cd51878 tools: fix define2mk.sed to not add quotes around negative integers by Masahiro Yamada · 8 years ago
  15. 6b96c1a tools: moveconfig: Add a new --git-ref option by Joe Hershberger · 8 years ago
  16. 06cc1d3 tools: moveconfig: New color used for changed defconfig by Joe Hershberger · 8 years ago
  17. f2dae75 tools: moveconfig: Fix another typo by Joe Hershberger · 8 years ago
  18. e307fa9 tools: moveconfig: make Slot.poll() more readable with helper methods by Masahiro Yamada · 8 years ago
  19. 6a9f79f tools: moveconfig: allow to run without any CONFIG specified by Masahiro Yamada · 8 years ago
  20. 8513dc0 tools: moveconfig: add --force-sync option by Masahiro Yamada · 8 years ago
  21. c8e1b10 tools: moveconfig: report when defconfig is updated by Masahiro Yamada · 8 years ago
  22. 5da4f85 tools: moveconfig: report when CONFIGs are removed by savedefconfig by Masahiro Yamada · 8 years ago
  23. c1c4d0f tools: moveconfig: display log when savedefconfig occurs by Masahiro Yamada · 8 years ago
  24. 7fb0bac tools: moveconfig: skip savedefconfig if .config was not updated by Masahiro Yamada · 8 years ago
  25. 4efef99 tools: moveconfig: refactor code to go back to idle state by Masahiro Yamada · 8 years ago
  26. 1d08556 tools: moveconfig: display log atomically in more readable format by Masahiro Yamada · 8 years ago
  27. 522e8dc tools: moveconfig: move log output code out of Kconfig Parser class by Masahiro Yamada · 8 years ago
  28. 1f16992 tools: moveconfig: compute file paths just once by Masahiro Yamada · 8 years ago
  29. b6ef393 tools: moveconfig: allow to give CONFIG names as argument directly by Masahiro Yamada · 8 years ago
  30. b134bc1 tools: moveconfig: drop code for handling type and default value by Masahiro Yamada · 8 years ago
  31. cc00829 tools: moveconfig: do not rely on type and default value given by users by Masahiro Yamada · 8 years ago
  32. c5e60fd tools: moveconfig: increment number of processed files monotonically by Masahiro Yamada · 8 years ago
  33. bd63e5b tools: moveconfig: exit with error message for not clean directory by Masahiro Yamada · 8 years ago
  34. 90ed6cb tools: moveconfig: check compilers before starting defconfig walk by Masahiro Yamada · 8 years ago
  35. 4b430c9 tools: moveconfig: check directory location before compilers by Masahiro Yamada · 8 years ago
  36. ff8725b tools: moveconfig: remove redundant else: after sys.exit() by Masahiro Yamada · 8 years ago
  37. 6ff36d2 tools: moveconfig: rename update_defconfig() to update_dotconfig() by Masahiro Yamada · 8 years ago
  38. e423d17 tools: moveconfig: fix --dry-run option by Masahiro Yamada · 8 years ago
  39. c1631c8 serial: atmel_usart: Add device tree support by Wenyou Yang · 8 years ago
  40. d3b6662 ARM: at91: Fix PMC bit definitions by Marek Vasut · 8 years ago
  41. 1c24f13 ARM: at91: sama5: Extend boot device autodetection by Marek Vasut · 8 years ago
  42. 885fc03 arm: at91: Add support for gurnard by Andre Renaud · 9 years ago
  43. 04b9dd1 fdt: Correct return value in fdtdec_decode_display_timing() by Simon Glass · 9 years ago
  44. 9dc89a0 at91: video: Support driver-model for the LCD driver by Simon Glass · 9 years ago
  45. d63ec26 at91: video: Prepare for driver-model conversion by Simon Glass · 9 years ago
  46. 88a7fff linux/compat.h: add dev_warn() by Andreas Bießmann · 8 years ago
  47. b3ab0fc at91: Add driver-model GPIO devices for AT91SAM9G45 by Simon Glass · 9 years ago
  48. 65319f1 at91: nand: Set up the ECC strength correctly by Andre Renaud · 9 years ago
  49. 5a9ae33 at91: Correct NAND ECC register access by Andre Renaud · 9 years ago
  50. 01648f3 arm: at91: Add a header file for the real-time clock by Andre Renaud · 9 years ago
  51. 6f96785 arm: at91: dts: Bring in device tree file for AT91SAM9G45 by Simon Glass · 9 years ago
  52. f1dcc19 net: macb: Convert to driver model by Simon Glass · 9 years ago
  53. f589f8c net: macb: Flush correct cache portion when sending by Simon Glass · 9 years ago
  54. d5555b7 net: macb: Prepare for driver-model conversion by Simon Glass · 9 years ago
  55. 166c409 net: Handle an empty bootp extension section by Andre Renaud · 9 years ago
  56. b4d956f bootm: Align cache flush end address correctly by Simon Glass · 9 years ago
  57. b5bd098 arm: Allow skipping of low-level init with I-cache on by Simon Glass · 9 years ago
  58. 9095846 at91: Add support for the AT91 slow clock controller by Andre Renaud · 9 years ago
  59. 152ac5f gpio: at91: Fix pullup/pulldown configuration on PIO3 by Marek Vasut · 9 years ago
  60. 51c14cd verified-boot: Minimal support for booting U-Boot proper from SPL by Teddy Reed · 8 years ago
  61. 7147a7e ti_armv7_common: env: Remove no longer needed mem_reserve by Andrew F. Davis · 8 years ago
  62. 666362356 cmd: gpt: add - partition size parsing by Michael Trimarchi · 8 years ago
  63. 1428d83 arm: dra7xx: Assign omap_vcores based on board type by Keerthy · 8 years ago
  64. 672a45e Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 8 years ago
  65. b103350 Merge branch 'master' of git://git.denx.de/u-boot-mips by Tom Rini · 8 years ago
  66. 3fc304b Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 8 years ago
  67. b57129d Merge branch 'master' of git://git.denx.de/u-boot-x86 by Tom Rini · 8 years ago
  68. 9769e05 x86: broadwell: gpio: Remove the codes to set up pin control by Bin Meng · 8 years ago
  69. d8906c1 x86: Probe pinctrl driver in cpu_init_r() by Bin Meng · 8 years ago
  70. 2f29c83 x86: Enable regmap and syscon for coreboot and qemu-x86 by Bin Meng · 8 years ago
  71. 2600ba6 x86: Update x86-pinctrl driver device-tree-bindings doc by Bin Meng · 8 years ago
  72. f7a01e4 x86: baytrail: Configure card detect pin of the SD controller by Bin Meng · 8 years ago
  73. 58d1fed x86: baytrail: Change fsp, emmc-boot-mode to "auto" by Bin Meng · 8 years ago
  74. e264e3c x86: baytrail: Add 'reg' property in the pinctrl node by Bin Meng · 8 years ago
  75. 8142340 x86: ich6_gpio: Output return value of syscon_get_by_driver_data() by Bin Meng · 8 years ago
  76. 8a1a759 x86: acpi: Fix madt lapic generation by George McCollister · 8 years ago
  77. a646f66 armv8: ls2080aqds: Enable QSPI boot support by Yuan Yao · 8 years ago
  78. 01de830 configs: ls2080aqds_nand_defconfig: Enable QSPI by Yuan Yao · 8 years ago
  79. 74cac00 configs: ls2080a: Increase load image len in NAND boot by Yuan Yao · 8 years ago
  80. 453418f armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot by Yuan Yao · 8 years ago
  81. 95ab851 dts: ls2080aqds: Add QSPI dts node by Yuan Yao · 8 years ago
  82. b718d37 configs: ls2080aqds: Enable QSPI flash support by Yuan Yao · 8 years ago
  83. 8c77ef8 armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable by Yuan Yao · 8 years ago
  84. 82d1334 configs: ls2080a_common: Remove duplicate NOR configs by Yuan Yao · 8 years ago
  85. 916d9f0 armv8: ls2080aqds: Select QSPI CLK div via SCFG by Yuan Yao · 8 years ago
  86. 9d10c2d drivers: i2c: mxc: Add early init by Yuan Yao · 8 years ago
  87. 30677de board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment by Pratiyush Mohan Srivastava · 9 years ago
  88. a758177 armv8/ls2080a: configure PMU's PCTBENR to enable WDT by Yunhui Cui · 8 years ago
  89. 1a83fb4 sunxi: Move the SPL stack top to 0x1A000 on Allwinner A64/A80 by Siarhei Siamashka · 8 years ago
  90. 5bc88cc sunxi: Downclock AHB1 to 100MHz on Allwinner A64 by Siarhei Siamashka · 8 years ago
  91. e19b900 spi: pic32_spi: add SPI master driver for PIC32 SoC. by Purna Chandra Mandal · 8 years ago
  92. 4b7b0a0 MIPS: Make CONFIG_SYS_DCACHE_LINE_SIZE int, not hex by Paul Burton · 8 years ago
  93. a95800e MIPS: Fix invalidate_dcache_range to operate on L1 Dcache by Paul Burton · 8 years ago
  94. bca4c3c sunxi: musb: Properly turn of musb controller before booting by Hans de Goede · 8 years ago
  95. fd2aa39 sunxi: Add INITIAL_USB_SCAN_DELAY to Mele_A1000G_quad_defconfig by Hans de Goede · 8 years ago
  96. 1903bb9 sunxi: Enable ALDO3 and ALDO4 in Wobo_i5_defconfig by Hans de Goede · 8 years ago
  97. 6b3943f siemens,am33x: add draco etamin board by Heiko Schocher · 8 years ago
  98. 9ae63f4 dfu, nand, ubi: fix erasing after write finish by Heiko Schocher · 8 years ago
  99. 02b11f1 am335x, dxr2: get ECC sType from I2C eeprom by Heiko Schocher · 8 years ago
  100. 3a504d9 mtd: nand: omap: allow to switch to BCH16 by Heiko Schocher · 8 years ago