- 4ad4edf cmd_ut: add a parameter prefix to the function cmd_ut_category by Philippe Reynes · 5 years ago
- 5677fe9 power: regulator: support off-on-delay-us by Peng Fan · 5 years ago
- 33fd419 remoteproc: stm32: load resource table from firmware by Fabien Dessenne · 5 years ago
- 790d5b3 stm32mp1: remove copro_state environment variable by Fabien Dessenne · 5 years ago
- 4a4deb8 remoteproc: stm32: track the coprocessor state in a backup register by Fabien Dessenne · 5 years ago
- 7bff971 stm32mp1: reset coprocessor status at cold boot by Fabien Dessenne · 5 years ago
- ee16c9a stm32mp1: declare backup registers for coprocessor by Fabien Dessenne · 5 years ago
- ffcb880 remoteproc: elf_loader: Add elf resource table load support by Fabien Dessenne · 5 years ago
- 152781d spl: fit: Allow the board to tell if more images must be loaded from FIT by Jean-Jacques Hiblot · 5 years ago
- 557bc97 dts: Add support for adding DT overlays in u-boot.img by Jean-Jacques Hiblot · 5 years ago
- 02806e9 include: board: provide empty stubs when the BOARD option is not selected by Jean-Jacques Hiblot · 5 years ago
- d42730e drivers: board: Add get_fit_loadable() by Jean-Jacques Hiblot · 5 years ago
- 8c86f96 drivers: board: Make the board drivers available in SPL by Jean-Jacques Hiblot · 5 years ago
- c1648d0 spl: fit: constify the output parameter of spl_fit_get_image_name() by Jean-Jacques Hiblot · 5 years ago
- 47818e2 Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is enabled by Jean-Jacques Hiblot · 5 years ago
- 19141d6 spl: fit: be more verbose when an error occurs when applying the overlays by Jean-Jacques Hiblot · 5 years ago
- 24bf44c spl: fit: Do not fail immediately if an overlay is not available by Jean-Jacques Hiblot · 5 years ago
- ea376eb spl: fit: allocate a temporary buffer to load the overlays by Jean-Jacques Hiblot · 5 years ago
- 99329be spl: fit: Make room in the FDT before applying overlays by Jean-Jacques Hiblot · 5 years ago
- 9d13b87 spl: fit: Add support for applying DT overlay by Michal Simek · 5 years ago
- 6b8b98d spl: fit: don't load the firmware twice by Jean-Jacques Hiblot · 5 years ago
- e3cd06b tools: dumpimage: Fall-though to print usage for help command by Andrew F. Davis · 5 years ago
- e5b5628 tools: fit_image: Use fit_image_get_data_and_size for getting offset/size by Andrew F. Davis · 5 years ago
- 79e984c tools: dumpimage: Provide more feedback on internal errors by Andrew F. Davis · 5 years ago
- d8a3f52 Merge tag 'u-boot-imx-20200107' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx by Tom Rini · 4 years, 11 months ago
- ac0f978 Merge tag 'u-boot-atmel-2020.04-a' of https://gitlab.denx.de/u-boot/custodians/u-boot-atmel by Tom Rini · 4 years, 11 months ago
- b6e7ef4 ARM: mxs: spl_boot.c: make early_delay more robust by Rasmus Villemoes · 5 years ago
- b1278a8 ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods by Michael Trimarchi · 4 years, 11 months ago
- f838ebf ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL by Jagan Teki · 4 years, 11 months ago
- d159b02 ARM: dts: icorem6: Sync engicam device trees from v5.4 by Jagan Teki · 4 years, 11 months ago
- 57de577 configs: imx6-engicam: Drop fec phy address and mode by Michael Trimarchi · 4 years, 11 months ago
- 90d4665 board: engicam: Fix the ethernet clock initialization by Michael Trimarchi · 4 years, 11 months ago
- 8811c4d board: engicam: Cleanup fdt file and board mapping by Michael Trimarchi · 4 years, 11 months ago
- abaf5c9 arm: mxs: be more careful when enabling gpmi_clk by Rasmus Villemoes · 5 years ago
- fb94625 arm: mxs: fix comments in arch_cpu_init to match the code by Rasmus Villemoes · 5 years ago
- bb09bd5 arm: mxs: fix register definitions for clkctrl_gpmi and clkctrl_sspX by Rasmus Villemoes · 5 years ago
- 32efcbc imx8mm_evk: Adjust the environment for booting a mainline kernel by Fabio Estevam · 5 years ago
- 061b63b mach-imx: nandbcb: improve cmd help by Igor Opaniuk · 5 years ago
- 08b7286 mx6slevk: Fix the pmic_get() parameter in the DM case by Fabio Estevam · 5 years ago
- 94b2936 mx6sllevk: Fix the pmic_get() parameter in the DM case by Fabio Estevam · 5 years ago
- cb14a5b mx7dsabresd: Fix the pmic_get() parameter in the DM case by Fabio Estevam · 5 years ago
- 83083fe ddr: imx8m: Return error values from LPDDR4 training by Frieder Schrempf · 5 years ago
- 162c72c tools: imx8m_image: Change source path for DDR firmware to build dir by Frieder Schrempf · 5 years ago
- 44ad496 arm: imx: Default to SYS_THUMB_BUILD for i.MX6/7 by Tom Rini · 5 years ago
- c0f037f mach-imx: bootaux: elf firmware support by Igor Opaniuk · 4 years, 11 months ago
- ebabbf1 colibri_imx7: migrate to DM_ETH by Igor Opaniuk · 5 years ago
- 45997eb ARM: dts: imx7: imx7_colibri: introduce fec node by Igor Opaniuk · 5 years ago
- a781ed2 apalis_imx6: migrate to DM_ETH by Igor Opaniuk · 5 years ago
- f9be62a ARM: dts: imx6_apalis: introduce fec node by Igor Opaniuk · 5 years ago
- 431cd76 colibri_imx6: migrate to DM_ETH by Igor Opaniuk · 5 years ago
- fbcd880 ARM: dts: imx6_colibri: introduce fec node by Igor Opaniuk · 5 years ago
- 2788063 MAINTAINERS: change colibri_imx6/imx6ull/t30/vf maintainers by Igor Opaniuk · 5 years ago
- b6ba18f MAINTAINERS: change apalis_imx6/colibri_imx6 maintainers by Igor Opaniuk · 5 years ago
- 87271ed mx7dsabre: Remove warning about DM_SPI_FLASH by Joris Offouga · 5 years ago
- 80e62e3 mx7dsabre: Convert to distroboot support by Joris Offouga · 5 years ago
- 0d52bab mx7dsabre: Enable DM_ETH by Joris Offouga · 5 years ago
- 0417ef1 mx7ulp: Add support for Embedded Artists COM board by Fabio Estevam · 5 years ago
- 97c4275 colibri_vf: add update_uboot wrapper by Igor Opaniuk · 5 years ago
- ba195a9 colibri-imx6ull: add update_uboot wrapper by Igor Opaniuk · 5 years ago
- 16e33d3 colibri_imx6: add update_uboot wrapper by Igor Opaniuk · 5 years ago
- 7cde015 apalis_imx6: add update_uboot wrapper by Igor Opaniuk · 5 years ago
- 9e286cb colibri_imx7: add update_uboot wrapper by Igor Opaniuk · 5 years ago
- 943be15 imx: cx9020: use distro boot by Steffen Dirkwinkel · 5 years ago
- dd7e7fe imx: cx9020: enable vidconsole by default by Steffen Dirkwinkel · 5 years ago
- ba1444e imx: cx9020: migrate cx9020 to CONFIG_DM_USB by Steffen Dirkwinkel · 5 years ago
- 9c2b1b0 imx: cx9020: migrate cx9020 to CONFIG_DM_ETH by Steffen Dirkwinkel · 5 years ago
- d98929d imx: sync with kernel device tree for Phycore SoM by Parthiban Nallathambi · 5 years ago
- 8903826 mach-imx: bootaux: add dcache flushing before enabling M4 by Igor Opaniuk · 5 years ago
- 0ba1b4d mach-imx: bootaux: print stack pointer and reset vector by Igor Opaniuk · 5 years ago
- c5773cc pci: imx: Add iMX6SX compatible by Marek Vasut · 5 years ago
- 1699f0e arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors by Suniel Mahesh · 5 years ago
- 26d926d board: cm_fx6: Enable CONFIG_DM_ETH by Suniel Mahesh · 5 years ago
- 7f681b3 board: cm_fx6: Enable DM support for video, fix build error by Suniel Mahesh · 5 years ago
- c35b195 ARM: mx6: ddr: Add support for iMX6SX by Marek Vasut · 5 years ago
- b314003 ARM: mx6: ddr: Configure all SDQS pullups using loop by Marek Vasut · 5 years ago
- 7ec0e39 ARM: mx6: ddr: Factor out SDQS configuration code by Marek Vasut · 5 years ago
- 736b491 ARM: mx6: ddr: Make debug prints work with tiny printf by Marek Vasut · 5 years ago
- 04886b3 ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command by Claudius Heine · 5 years ago
- f8420d7 ARM: dts: dh-imx6: add u-boot specific wdt-reboot node by Claudius Heine · 5 years ago
- eb9124f mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB by Baruch Siach · 5 years ago
- 281d5e4 arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2) by Baruch Siach · 5 years ago
- 730e6a0 arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2) by Baruch Siach · 5 years ago
- e010307 dt-bindings: add imx-audmux macro definitions by Baruch Siach · 5 years ago
- 7915e15 board: ge: mx53ppd: use imx wdt by Robert Beckett · 5 years ago
- d494aec board: ge: bx50v3: use imx wdt by Robert Beckett · 5 years ago
- b186cfa board: ge: pass rtc_status via device tree by Ian Ray · 5 years ago
- b565b18 board: ge: bx50v3: Enable DM for PCI and ethernet by Denis Zalevskiy · 5 years ago
- 833dd64 configs: ppd: DM for USB and regulators PPD by Denis Zalevskiy · 5 years ago
- c6b31ca board: ge: bx50v3: Fix message output to video console by Ian Ray · 5 years ago
- 08ecab0 board: ge: bx50v3: Fix run-time warning by Ian Ray · 5 years ago
- 05de200 configs: bx50v3: Fix boot hang with video by Ian Ray · 5 years ago
- 6388f99 board: ge: ppd: sync device tree from Linux by Robert Beckett · 5 years ago
- 8c26739 board: ge: bx50v3: sync devicetrees from Linux by Robert Beckett · 5 years ago
- 010e58d imx: Add support for i.MX28 based XEA board by Lukasz Majewski · 5 years ago
- 227cb30 imx6: aristainetos: add support for rev C board by Heiko Schocher · 5 years ago
- c08aa77 imx6: aristainetos: add aristainetos 2b csl by Heiko Schocher · 5 years ago
- 1204b96 imx6: aristainetos: readd aristainetos 2b board by Heiko Schocher · 5 years ago
- 1c9c464 imx6: aristainetos: enable HAB boot by Heiko Schocher · 5 years ago
- 70be2fc imx6: aristainetos: cleanup default Environment by Heiko Schocher · 5 years ago
- 445c230 imx6: aristainetos: WDT DM conversion enable WDT reset by Heiko Schocher · 5 years ago