1. c68436f Merge remote-tracking branch 'u-boot-ti/master' by Albert ARIBAUD · 12 years ago
  2. 6422b70 am33xx: Enable UART{1,2,3,4,5} pin-mux by Andrew Bradford · 12 years ago
  3. c7d35be am33xx/ddr_defs.h: rename DDR2/DDR3 defines to their actual part numbers by Peter Korsgaard · 12 years ago
  4. c00f69d am33xx: support board specific ddr settings by Peter Korsgaard · 12 years ago
  5. 7f26a5a am33xx: move generic parts of pinmux handling out from board/ti/am335x by Peter Korsgaard · 12 years ago
  6. e363426 am33xx: move ti i2c baseboard header handling to board/ti/am335x/ by Peter Korsgaard · 12 years ago
  7. 860bde3 omap2424:Rename CONFIG_DRIVER_LAN91C96 to CONFIG_LAN91C96 as CONFIG_DRIVER_LAN91C96 is obsolete. by Ashok · 12 years ago
  8. 676ae06 usb: ehci: rework to take advantage of new lowlevel interface by Lucas Stach · 12 years ago
  9. b823fd9 ARM: prevent misaligned array inits by Albert ARIBAUD · 12 years ago
  10. 7ac2fe2 OMAP: networking support for SPL by Ilya Yanok · 12 years ago
  11. a4a99ff am335x evm: Enable support for spi0 by Tom Rini · 12 years ago
  12. 6bfca50 am335x evm: Enable MMC1 pinmux by Tom Rini · 12 years ago
  13. 036fd65 am335x evm: Initial support for AM335x GP EVM Profiles by Tom Rini · 12 years ago
  14. db7dd81 am33xx: Rework pinmux functions by Tom Rini · 12 years ago
  15. 65d750b am33xx: Add support for TI AM335x StarterKit EVM by Tom Rini · 12 years ago
  16. 973b663 am33xx: Remove board/ti/am335x/evm.c by Tom Rini · 12 years ago
  17. 9304296 am335x_evm: CPSW support by Chandan Nath · 12 years ago
  18. c59a6a0 am335x_evm: read the on-board EEPROM by Ilya Yanok · 12 years ago
  19. 89017e1 am33xx: pin mux defintions for CPSW switch by Chandan Nath · 12 years ago
  20. 2c30c18 beagle: only call DSS code when #defined CONFIG_VIDEO_OMAP3 by Peter Meerwald · 12 years ago
  21. d3decde omap: am335x_evm: enable i2c1 channel by Steve Sakoman · 12 years ago
  22. 71a271c beagle: removed unused pr_debug #define by Peter Meerwald · 12 years ago
  23. fff1a57 beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static by Peter Meerwald · 12 years ago
  24. 28adc91 omap: am335x_evm: remove unused definitions by Steve Sakoman · 12 years ago
  25. b98b611 Merge branch 'next' of git://git.denx.de/u-boot by Wolfgang Denk · 12 years ago
  26. 702e601 doc: cleanup - move board READMEs into respective board directories by Wolfgang Denk · 13 years ago
  27. d2ebaa4 ARM: OMAP4: PANDA: Add rest of the USB module pads to essentials by SRICHARAN R · 12 years ago
  28. ef88e60 beagle: add eeprom expansion board info for bct brettl4 by Peter Meerwald · 12 years ago
  29. 1a89a21 ARM: OMAP4/5: Move USB pads to essential list. by SRICHARAN R · 12 years ago
  30. 2ab2810 am33xx: Do not call init_timer twice by Tom Rini · 13 years ago
  31. 954211c omap4: panda: disable uart2 pads during boot by Tero Kristo · 13 years ago
  32. 60bd10d omap730p2: Remove empty misc_init_r by Tom Rini · 13 years ago
  33. b8f4a72 omap5912osk: Remove empty misc_init_r by Tom Rini · 13 years ago
  34. 2114429 power: twl6035: add palmas PMIC support by SRICHARAN R · 13 years ago
  35. 84b16af OMAP5: board: Add pinmux data for omap5_evm board. by SRICHARAN R · 13 years ago
  36. 3acb553 OMAP4460: TPS Ensure SET1 is selected after voltage configuration by Nishanth Menon · 13 years ago
  37. bbbc1ae ARM:OMAP+:MMC: Add parameters to MMC init by Jonathan Solnit · 13 years ago
  38. aae58b9 BeagleBoard: Remove userbutton command and use gpio command instead by Joel Fernandes · 13 years ago
  39. 76e2c16 OMAP: Remove omap1610inn-based boards by Tom Rini · 13 years ago
  40. 3fbc693 board/ti/beagle/beagle.c: Fix build warnings by Anatolij Gustschin · 13 years ago
  41. 578ac1e bootstage: Make use of BOOTSTAGE_ID_RUN_OS in show_boot_progress() by Simon Glass · 13 years ago
  42. 4258aa6 beagle: enable DVI_PUP by Peter Meerwald · 13 years ago
  43. 66327eb beagle: fix typos by Peter Meerwald · 13 years ago
  44. 49be71c OMAP4: ehci-omap: enable ehci-omap for panda boards by Govindraj.R · 13 years ago
  45. 43b6239 ehci-omap: Clean up added ehci-omap.c by Govindraj.R · 13 years ago
  46. 29321c0 ehci-omap: driver for EHCI host on OMAP3 by Ilya Yanok · 13 years ago
  47. 223b8aa Beagleboard: Correct memory size on rev C4 by robertcnelson@gmail.com · 13 years ago
  48. b4116ed ARM: AM33XX: Add i2c support by Patil, Rachna · 13 years ago
  49. 8a8f084 ARM:AM33XX: Add SPL support for AM335X EVM by Chandan Nath · 13 years ago
  50. 876bdd6 ARM:AM33XX: Add mmc/sd support by Chandan Nath · 13 years ago
  51. 6cce550 beagle: add eeprom expansion board info for bct brettl3 by Peter Meerwald · 13 years ago
  52. df65a3f omap4_panda: Initialize the USB phy by Chris Lalancette · 13 years ago
  53. 6bef783 board/ti/omap2420h4/omap2420h4.c: Fix GC 4.6 build warning by Wolfgang Denk · 13 years ago
  54. f23b7ea board/ti/omap730p2/flash.c: Fix GCC 4.6 build warnings by Wolfgang Denk · 13 years ago
  55. 2ccf26d board/ti/omap1610inn/flash.c: Fix GCC 4.6 build warnings by Wolfgang Denk · 13 years ago
  56. d067cc4 AM3517 CraneBoard: Add SPL support by Tom Rini · 13 years ago
  57. 673283f OMAP3: Add SPL support to omap3_evm by Tom Rini · 13 years ago
  58. 75c57a3 OMAP3: Add SPL support to Beagleboard by Tom Rini · 13 years ago
  59. ad2a790 AM3517: move AM3517 specific mux defines to generic header by Ilya Yanok · 13 years ago
  60. cd5847a omap4460: fix TPS initialization by Aneesh V · 13 years ago
  61. 78f455c omap4/5: Add support for booting with CH. by Sricharan · 13 years ago
  62. 508a58f omap5: Add minimal support for omap5430. by Sricharan · 13 years ago
  63. 5e463a2 omap3evm: Set environment variable 'ethaddr' by Sanjeev Premi · 13 years ago
  64. 5289e83 ARM:AM33XX: Add support for TI AM335X EVM by Chandan Nath · 13 years ago
  65. b5db0a0 omap: Don't use gpio_free to change direction to input by Joe Hershberger · 13 years ago
  66. 53430a4 omap4: splitting padconfs into common, 4430 and 4460 by Ricardo Salveti de Araujo · 13 years ago
  67. 464c792 punt unused clean/distclean targets by Mike Frysinger · 13 years ago
  68. 513e6fd OMAP3: beagle: Fix build warning in beagle.c by Dirk Behme · 13 years ago
  69. 2d3be7c led: remove camel casing of led identifiers globally by Jason Kridner · 13 years ago
  70. 43de24f omap4: fix pad configuration settings for SDP and Panda by Aneesh V · 13 years ago
  71. 84c3b63 omap: gpio: Adapt board files to use generic API by Sanjeev Premi · 13 years ago
  72. 38a77c3 beagleboard: enable HUB power on all variants of the BeagleBoard by Christian Spielberger · 13 years ago
  73. b8bc897 led: Remove state-saving of led for toggle functionality and add toggle option to led command by Joel A Fernandes · 13 years ago
  74. f87824e BeagleBoard: fix LED 0/1 in driver by Jason Kridner · 14 years ago
  75. 3f16ab9 BeagleBoard: Configure DVI/S-video by Jason Kridner · 14 years ago
  76. f835ea7 BeagleBoard: Added userbutton command by Jason Kridner · 14 years ago
  77. f44047d BeagleBoard: turn off clocks in ehci_stop by Koen Kooi · 13 years ago
  78. 1ffcb34 beagleboard: add support for xM revision C by Koen Kooi · 13 years ago
  79. 52d82e4 OMAP3 Beagle Pin Mux initialization glitch fix by Bob Feretich · 14 years ago
  80. 7cc862b TI OMAP3 SDP3430: Use generic MMC driver by Tom Rini · 13 years ago
  81. a5a8821 AM3517 CraneBoard: Use generic MMC driver by Tom Rini · 13 years ago
  82. dcc4f38 omap3evm: Use generic MMC driver by Vaibhav Hiremath · 13 years ago
  83. 2141e14 arm: omap: innovator: use common code for machine type by Igor Grinberg · 13 years ago
  84. bcae721 omap: add basic SPL support by Aneesh V · 13 years ago
  85. 469ec1e omap4: cleanup pin mux data by Aneesh V · 13 years ago
  86. 5626f33 omap3evm: eth: Include functions only when necessary by Sanjeev Premi · 13 years ago
  87. c068258 omap3evm: Update ethernet reset sequence for Rev.G board by Sriramakrishnan · 13 years ago
  88. 6921b31 omap3evm: eth: split function setup_net_chip by Sanjeev Premi · 13 years ago
  89. a60d1e5 Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm by Graeme Russ · 13 years ago
  90. f14a522 BeagleBoard: fixed typo in typecast by Jason Kridner · 14 years ago
  91. cd6881b Minor coding style cleanup. by Wolfgang Denk · 14 years ago
  92. f0c0b3a Fix incorrect use of getenv() before relocation by Wolfgang Denk · 14 years ago
  93. d90859a omap3_beagle: enable EHCI and USB storage. by Alexander Holler · 14 years ago
  94. 320f56f OMAP3: Change some USB related MUX values by Alexander Holler · 14 years ago
  95. 915162d ARMV7: AM3517/05: Add support for CraneBoard. by Srinath · 14 years ago
  96. ee8485f OMAP3: BeagleBoard: add more expansionboard IDs by Koen Kooi · 14 years ago
  97. f6e593b OMAP3: BeagleBoard: add xM rev B to ID table by Koen Kooi · 14 years ago
  98. d4e53f0 OMAP3: BeagleBoard: Enable pullups on i2c2. by Steve Kipisz · 14 years ago
  99. 70d8c94 BeagleBoard: Added LED driver by Jason Kridner · 14 years ago
  100. cdc51c2 Merge branch 'next' of ../next by Wolfgang Denk · 14 years ago