Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
  1. 5a1c9ff ppc4xx: Add pci_pre_init() for 405 boards by Matthias Fuchs · 17 years ago
  2. 3a1f5c8 ppc4xx: Fix problem with extended program_tlb() funtion by Stefan Roese · 17 years ago
  3. 02032e8 [ppc] Fix build breakage for all non-4xx PowerPC variants. by Rafal Jaworowski · 17 years ago
  4. 83b4cfa Coding style cleanup. Refresh CHANGELOG. by Wolfgang Denk · 17 years ago
  5. 6b44466 Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 17 years ago
  6. b3f9ec8 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board by Stefan Roese · 17 years ago
  7. df8a24c [ppc4xx] Fix problem with NAND booting on AMCC Acadia by Stefan Roese · 17 years ago
  8. 86ba99e [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c by Stefan Roese · 17 years ago
  9. 5ffa76a Merge with /home/wd/git/u-boot/master by Wolfgang Denk · 17 years ago
  10. e73846b [ppc4xx] Change lwmon5 port to work with recent 440 exception rework by Stefan Roese · 17 years ago
  11. b7c3e93 Merge with /home/stefan/git/u-boot/denx-440-exceptions by Stefan Roese · 17 years ago
  12. efa35cf ppc4xx: Clean up 440 exceptions handling by Grzegorz Bernacki · 17 years ago
  13. b765ffb [ppc4xx] Add initial lwmon5 board support by Stefan Roese · 17 years ago
  14. 85f7373 [ppc4xx] Extend 44x GPIO setup with default output state by Stefan Roese · 17 years ago
  15. dbca208 [ppc4xx] Extend program_tlb() with virtual & physical addresses by Stefan Roese · 17 years ago
  16. 9912121 Change 'repeatable' attribute of some commands to sensible values. by Detlev Zundel · 18 years ago
  17. 5afb202 Fix 'run' not to continue after interrupted command by Detlev Zundel · 18 years ago
  18. 8f8416f TQM5200: Add Flat Device Tree support, update default env. accordingly. by Bartlomiej Sieka · 17 years ago
  19. 9045f33 Fix config problems on SC3 board; make ide_reset_timeout work. by Wolfgang Denk · 17 years ago
  20. fba3fb0 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE by Benoît Monin · 17 years ago
  21. 725671c Coding Style cleanup; generate new CHANGELOG file. by Wolfgang Denk · 17 years ago
  22. 83b75ef Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xx by Wolfgang Denk · 17 years ago
  23. d1246a4 Merge with /home/wd/git/u-boot/custodian/u-boot-arm by Wolfgang Denk · 17 years ago
  24. 1cf6756 Merge with /home/stefan/git/u-boot/acadia-nand-boot by Stefan Roese · 17 years ago
  25. c440bfe ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board by Stefan Roese · 17 years ago
  26. ac0e8d0 Merge branch 'mpc8641' by Jon Loeliger · 17 years ago
  27. 32922cd mpc8641 image size cleanup by Ed Swarthout · 17 years ago
  28. c0c292b Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx by Wolfgang Denk · 17 years ago
  29. e3cbe1f [PATCH] Fix ppc4xx bootstrap letter displayed on startup by Benoît Monin · 17 years ago
  30. 18d156e ppc4xx: Add missing file for Bamboo NAND booting support by Stefan Roese · 17 years ago
  31. f3679aa Merge with /home/stefan/git/u-boot/bamboo-nand by Stefan Roese · 17 years ago
  32. 155a964 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz by Stefan Roese · 17 years ago
  33. 9d90960 ppc4xx: Update Sequoia NAND booting support with ECC by Stefan Roese · 17 years ago
  34. cf959c7 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board by Stefan Roese · 17 years ago
  35. 42be56f NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c by Stefan Roese · 17 years ago
  36. a471db0 ppc4xx: Prepare Bamboo port for NAND booting support by Stefan Roese · 17 years ago
  37. 53ad021 ppc4xx: Update in_be32() functions and friends to latest Linux version by Stefan Roese · 17 years ago
  38. 91da09c NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c by Stefan Roese · 17 years ago
  39. 17b5e86 NAND: Update nand_ecc.c to latest Linux version by Stefan Roese · 17 years ago
  40. d2d4327 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo by Stefan Roese · 17 years ago
  41. e4bbed2 ppc4xx: Change Luan config file to support ECC by Stefan Roese · 17 years ago
  42. 7187db7 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) by Stefan Roese · 17 years ago
  43. f611379 Merge with /home/wd/git/u-boot/stx-gp3ssa by Wolfgang Denk · 17 years ago
  44. ee15298 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. by Wolfgang Denk · 17 years ago
  45. 19bf91f Merge with /home/tur/git/u-boot#motionpro by Wolfgang Denk · 18 years ago
  46. 7049288 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. by Bartlomiej Sieka · 18 years ago
  47. 4520fd4 Motion-PRO: Add support for redundant environment. by Bartlomiej Sieka · 18 years ago
  48. a26eabe Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. by Bartlomiej Sieka · 18 years ago
  49. 9160b96 Fix: Add missing NULL termination in strings expanded by macros parser. by Bartlomiej Sieka · 18 years ago
  50. 630ec84 Motion-PRO: Update EEPROM's page write bits and write delay. by Bartlomiej Sieka · 18 years ago
  51. c00125e MPC5XXX, Motion-PRO: Fix PHY initialization problem. by Bartlomiej Sieka · 18 years ago
  52. 93b78f5 Motion-PRO: Add support for the temperature sensor. by Bartlomiej Sieka · 18 years ago
  53. c75e639 Motion-PRO: Add displaying of CPLD revision information during boot. by Bartlomiej Sieka · 18 years ago
  54. c99512d MPC5xxx: Change names of defines related to IPB and PCI clocks. by Bartlomiej Sieka · 18 years ago
  55. a11c0b8 Motion-PRO: Add LED support. by Bartlomiej Sieka · 18 years ago
  56. 7d075ee Merge with /home/stefan/git/u-boot/acadia-nand by Stefan Roese · 18 years ago
  57. d756894 ppc4xx: Fix small 405EZ OCM initilization bug in start.S by Stefan Roese · 18 years ago
  58. 5d4a179 ppc4xx: Update AMCC Acadia support for board revision 1.1 by Stefan Roese · 18 years ago
  59. 9f0077a ppc4xx: Use do { ... } while (0) for CPR & SDR access macros by Stefan Roese · 18 years ago
  60. 6f3dfc1 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c by Stefan Roese · 18 years ago
  61. 10603d7 ppc4xx: Fix problem in 405EZ OCM initialization by Stefan Roese · 18 years ago
  62. 7bfebfe Add support for the Siemens SMN42 board. by Gary Jennejohn · 18 years ago
  63. 3e3b956 Reduce line lengths to 80 characters max. by Peter Pearse · 18 years ago
  64. 879027d Merge with git://www.denx.de/git/u-boot.git by Peter Pearse · 18 years ago
  65. 93ef45c Makefile permissions by Peter Pearse · 18 years ago
  66. fdda367 Merge with git://www.denx.de/git/u-boot.git by Peter Pearse · 18 years ago
  67. 1443a31 Makefile permissions by Peter Pearse · 18 years ago
  68. ee96088 Merge with git://www.denx.de/git/u-boot.git by Stefan Roese · 18 years ago
  69. 70124c2 Fix compile problem cause my Microblaze merge by Stefano Babic · 18 years ago
  70. ada4697 [PATCH] Run new sequoia boards with an EBC speed of 83MHz by Jeffrey Mann · 18 years ago
  71. a7676ea Minor Coding Style cleanup, update CHANGELOG. by Wolfgang Denk · 18 years ago
  72. 256176d Merge with /home/wd/git/u-boot/custodian/u-boot-mpc83xx by Wolfgang Denk · 18 years ago
  73. d62f64c Coding Style Cleanup, new CHANGELOG by Wolfgang Denk · 18 years ago
  74. d602257 Merge with /home/wd/git/u-boot/custodian/u-boot-microblaze by Wolfgang Denk · 18 years ago
  75. e738658 Merge with /home/wd/git/u-boot/master by Wolfgang Denk · 18 years ago
  76. f0da1d1 Merge with /home/tur/git/u-boot#motionpro by Wolfgang Denk · 18 years ago
  77. 6193666 ppc4xx: Add mtcpr/mfcpr access macros by Stefan Roese · 18 years ago
  78. 343c48b ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too by Stefan Roese · 18 years ago
  79. 3423c44 Merge branch 'mpc8641' by Jon Loeliger · 18 years ago
  80. 7d98ba7 [Motion-PRO] Add MTD and JFFS2 support, also add default partition definition. by Piotr Kruszynski · 18 years ago
  81. 65fb6a6 Add the board directory for SMN42 by Peter Pearse · 18 years ago
  82. 160131b Add the files for the SMN42 board by Peter Pearse · 18 years ago
  83. 5c6d2b5 Remove the deleted files for the SMN42 patch by Peter Pearse · 18 years ago
  84. b0d8f5b New board SMN42 branch by Peter Pearse · 18 years ago
  85. 29f3be0 Makefile permissions by Peter Pearse · 18 years ago
  86. b84289b 8641hpcn: Fix Makefile after moving pixis to board/freescale. by Ed Swarthout · 18 years ago
  87. e69f66c add: reading special purpose registers by Michal Simek · 18 years ago
  88. 1a50f164 add: Microblaze V5 exception handling by Michal Simek · 18 years ago
  89. ab874d5 add: FSL control read and write by Michal Simek · 18 years ago
  90. de1de02 [Motion-PRO] Add support for I2C, EEPROM and RTC. by Piotr Kruszynski · 18 years ago
  91. fa5c2ba [Motion-PRO] Add ATA support. Add CF-booting commands to the default by Bartlomiej Sieka · 18 years ago
  92. 06241d5 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This by Bartlomiej Sieka · 18 years ago
  93. 1f1369c [Motion-PRO] Enable Flat Device Tree support and modify default environment by Bartlomiej Sieka · 18 years ago
  94. 3c4bd60 Merge git://www.denx.de/git/u-boot by Michal Simek · 18 years ago
  95. fb05f6d new: USE_MSR_INTR support by Michal Simek · 18 years ago
  96. 008861a [MPC5xxx] There are networking problems on the Motion-PRO board with by Bartlomiej Sieka · 18 years ago
  97. abca901 Get rid of duplicated file (see include/configs/sbc8560.h instead) by Wolfgang Denk · 18 years ago
  98. 207b7b2 Get rid of duplicated file (see doc/README.SBC8560 instead) by Wolfgang Denk · 18 years ago
  99. a7bac7e fix: read and write MSR - repair number of parameters by Michal Simek · 18 years ago
  100. 193b4a3 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file by Jeffrey Mann · 18 years ago