1. 643be9c EXYNOS: Move files from board/samsung to arch/arm by Rajeshwari Shinde · 11 years ago
  2. 198a40b EXYNOS4210: Configure GPIO for uart by Rajeshwari Shinde · 11 years ago
  3. 6e50e5c EXYNOS: LDS file move to common by Rajeshwari Shinde · 11 years ago
  4. c5171d1 CONFIG: EXYNOS5: Enable silent console by Rajeshwari Shinde · 11 years ago
  5. 2af4d0f net2big_v2: initialize I2C fan at startup by Simon Guinot · 11 years ago
  6. c2543a2 Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  7. 69f14dc Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  8. 7d47d1c arm: omap4: panda: Add reading of the board revision by Dan Murphy · 11 years ago
  9. 45dbbf2 arm: dra7xx: Update the EXTRA_ENV_SETTINGS by Dan Murphy · 11 years ago
  10. 3de7c28 arm: omap5_uevm: Correct the console sys prompt for 5432 by Dan Murphy · 11 years ago
  11. a714321 arm: omap: Add check for fdtfile in the findfdt macro by Dan Murphy · 11 years ago
  12. 752f4c4 SMDK5250: Initialise and Enable DWMMC, support FDT and non-FDT by Amar · 12 years ago
  13. ba223bb arm:trats: change auto-booting to boot kernel with separate device tree blob by Arkadiusz Wlodarczyk · 12 years ago
  14. c3442c1 arm: pxa: Add support for ICP DAS LP-8x4x by Sergey Yanovich · 12 years ago
  15. 68cd4a4 arm: da830: moved pinmux configurations to the arch tree by Vishwanathrao Badarkhe, Manish · 11 years ago
  16. 7f5eef9 arm: Remove OMAP2420H4 and all omap24xx support by Tom Rini · 11 years ago
  17. 03e08d7 da830: add MMC support by Vishwanathrao Badarkhe, Manish · 11 years ago
  18. 97405d8 ARM: DRA7xx: clocks: Update PLL values by Lokesh Vutla · 11 years ago
  19. a5d439c mmc: omap_hsmmc: Update pbias programming by Balaji T K · 11 years ago
  20. f9b814a ARM: DRA7xx: Correct the SYS_CLK to 20MHZ by Sricharan R · 11 years ago
  21. 378bd1f ARM: DRA7xx: Change the Debug UART to UART1 by Sricharan R · 11 years ago
  22. 4de28d7 ARM: DRA7xx: Add control id code for DRA7xx by Lokesh Vutla · 11 years ago
  23. 10e1673 Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  24. 7fb72c7 ARM: imx: Fix incorrect usage of CONFIG_SYS_MMC_ENV_PART by Fabio Estevam · 11 years ago
  25. 320d974 am33xx: Correct NON_SECURE_SRAM_START/END by Tom Rini · 11 years ago
  26. 9b75bad Add support for Congatec Conga-QEVAl board by SARTRE Leo · 11 years ago
  27. 8a00061 exynos: Update origen and smdkv310 to use common tzpc_init by Inderpal Singh · 12 years ago
  28. 72af2fc exynos: move tzpc_init to armv7/exynos by Inderpal Singh · 12 years ago
  29. a7efb02 wandboard: Add Boot Splash image with Wandboard logo by Otavio Salvador · 11 years ago
  30. 7bcb983 wandboard: Enable HDMI splashscreen by Fabio Estevam · 11 years ago
  31. 1957816 mx6qsabreauto: Add i2c to mx6qsabreauto board by Renato Frias · 12 years ago
  32. af0a37f mx6slevk: Allow booting a device tree kernel by Fabio Estevam · 11 years ago
  33. 8c65312 arm: vf610: Add basic support for Vybrid VF610TWR board by Alison Wang · 11 years ago
  34. a19b0dd Merge branch 'u-boot/master' into 'u-boot-arm/master' by Albert ARIBAUD · 11 years ago
  35. 60985bb tegra: Define CONFIG_SKIP_LOWLEVEL_INIT for SPL build by Axel Lin · 11 years ago
  36. d56273d Tegra: Remove unused/non-existent spl linker script reference by Tom Warren · 12 years ago
  37. 6eaeba2 powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple by Shaveta Leekha · 12 years ago
  38. 8fa0102 powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h by Poonam Aggrwal · 12 years ago
  39. 16d88f4 Enable XAUI interface for B4860QDS by Suresh Gupta · 12 years ago
  40. 94025b1 powerpc/p5040: enable PBL tool support by Shaohui Xie · 12 years ago
  41. 3d2972f powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h by York Sun · 12 years ago
  42. c79fd50 T4240/ramboot: enable PBL tool for T4240 by Shaohui Xie · 12 years ago
  43. 0ad6c34 ARM: Add Seagate GoFlex Home support by Suriyan Ramasami · 12 years ago
  44. d21c3af ARM: vexpress: enable bootz and hush parser for all VExpress boards by Andre Przywara · 12 years ago
  45. 3d3ae85 ARM: vexpress: add support for Versatile Express Cortex-A15-TC2 by Andre Przywara · 12 years ago
  46. cd4f46e ARM: vexpress: create A5 specific board config by Ryan Harkin · 12 years ago
  47. 9b58a3f ARM: vexpress: refactoring of Versatile Express CA9x4 support by Ryan Harkin · 12 years ago
  48. 3225f34 ARM: atmel: add sama5d3xek support by Bo Shen · 12 years ago
  49. c7c4fe0 SMDK5250: Enable SPI Gigabyte device. by Rajeshwari Shinde · 12 years ago
  50. eadfc13 mx23evk: Add splash screen support by Fabio Estevam · 12 years ago
  51. 68661db mx28evk: Add splash screen support by Fabio Estevam · 12 years ago
  52. fb651b1 Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx by Tom Rini · 12 years ago
  53. d6ed322 Power: remove support for Freescale MPC8220 by Wolfgang Denk · 12 years ago
  54. 04bccc3 T4240/net: use QSGMII card PHY address by default by Shaohui Xie · 12 years ago
  55. 9592780 t4240qds/eth: fixup ethernet for t4240qds by Shengzhou Liu · 12 years ago
  56. 10d644b powerpc: Add T4160QDS by York Sun · 12 years ago
  57. b46b7f9 powerpc/t4240qds: Move SoC define into boards.cfg by York Sun · 12 years ago
  58. 97c7fe6 powerpc/t4240qds: Add voltage ID support by York Sun · 12 years ago
  59. 4e5c926 powerpc/t4240qds: fix XAUI card PHY address by Shaohui Xie · 12 years ago
  60. 7ff8c7c powerpc/t4240qds: Fix SPI flash type by Shaohui Xie · 12 years ago
  61. 805fa87 Merge branch 'master' of git://git.denx.de/u-boot-blackfin into powerpc-eldk53-warning-fixes by Tom Rini · 12 years ago
  62. 04dbf77 x86: config: Enable LZO for coreboot, remove zlib, gzip by Simon Glass · 12 years ago
  63. 2e65959 x86: Enable bootstage for coreboot by Simon Glass · 12 years ago
  64. d0b6f24 x86: Re-enable PCAT timer 2 for beeping by Simon Glass · 12 years ago
  65. e761ecd x86: Add TSC timer by Simon Glass · 12 years ago
  66. da34aae bfin: Move gpio support for bf54x and bf60x into the generic driver folder. by Sonic Zhang · 12 years ago
  67. 9d803fc blackfin: Move blackfin serial driver out of blackfin arch folder. by Sonic Zhang · 12 years ago
  68. e9a389a blackfin: Move blackfin watchdog driver out of the blackfin arch folder. by Sonic Zhang · 12 years ago
  69. 50aadcc blackfin: Enable early print via the generic serial API. by Sonic Zhang · 12 years ago
  70. 955020c blackfin: Fit u-boot image size into limited nor flash on blackfin. by Sonic Zhang · 12 years ago
  71. 7d861d9 blackfin: bf609: add softswitch config command by Bob Liu · 12 years ago
  72. f4d8038 blackfin: run core1 from L1 code sram start address in uboot init code on core 0 by Sonic Zhang · 12 years ago
  73. e0ae433 blackfin: reduce size of u-boot.ldr in bf548-ezkit default config. by Bob Liu · 12 years ago
  74. d0a5137 at91sam9260ek: move board id setup to config header by Andreas Bießmann · 12 years ago
  75. 2480207 arm: at91: add at91sam9g20ek_mmc_config, which can save environment in mmc card by Wu, Josh · 12 years ago
  76. a73267a arm: at91: enable mci support for at91sam9g20ek. by Wu, Josh · 12 years ago
  77. 9e33690 arm: at91: add at91sam9n12ek board support by Wu, Josh · 12 years ago
  78. cac423a Merge branch 'u-boot-ti/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  79. ec7023d Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  80. e825b10 Merge branch 'u-boot-pxa/master' into 'u-boot-arm/master' by Albert ARIBAUD · 12 years ago
  81. 47c6ea0 ARM: OMAP: Add arch_cpu_init function by SRICHARAN R · 12 years ago
  82. 4a0eb75 ARM: OMAP: Cleanup boot parameters usage by SRICHARAN R · 12 years ago
  83. 34fa070 davinci: handle CONFIG_SYS_CLE_MASK and CONFIG_SYS_ALE_MASK by Eric Benard · 12 years ago
  84. 0b800a6 cm-t35: update config file by Igor Grinberg · 12 years ago
  85. 584506b ARM: Panda: Add flag to allow runtime enviroment varibale mods by Dan Murphy · 12 years ago
  86. 34f667b ARM:Panda:Fix device tree loading for the panda-es by Dan Murphy · 12 years ago
  87. 0b1b60c ARM: OMAP5: Fix warm reset with USB cable connected by Lokesh Vutla · 12 years ago
  88. 15191c9 Remove duplicate / unused #defines on AM335x boards by Mark Jackson · 12 years ago
  89. 85b7ac4 omap5_common: Add optargs variable for kernel command line args by Tom Rini · 12 years ago
  90. 5f5c1d1 ARM: Add support for IGEP COM AQUILA/CYGNUS by Enric Balletbo i Serra · 12 years ago
  91. cb19910 twl6035: rename to palmas by Nishanth Menon · 12 years ago
  92. cd87464 ti814x_evm: enable CPSW support by Matt Porter · 12 years ago
  93. 4e779ad gpio: Add support for microblaze xilinx GPIO by Michal Simek · 12 years ago
  94. d782c1f arm: mxs: video: Enable MXS LCDIF on M28EVK by Marek Vasut · 12 years ago
  95. b03b25c fpga: Remove all CONFIG_SYS_* fpga related options by Michal Simek · 12 years ago
  96. d5dae85 fpga: zynq: Add support for loading bitstream by Michal Simek · 12 years ago
  97. 48f0108 imx: ima3-mx53: Convert to iomux-v3 by Benoît Thébaudeau · 12 years ago
  98. 0f83b36 arm: mx5: Add support for DENX M53EVK by Marek Vasut · 12 years ago
  99. 5ed6f44 P1022DS: Set CONFIG_SPL_MAX_SIZE directly by Tom Rini · 12 years ago
  100. 3fe0128 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx by Tom Rini · 12 years ago