Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 645176d1d5c37c91ddb06c366678fbe302550387 / include / configs / omap3_overo.h
  1. 645176d configs: Migrate CONFIG_USB_STORAGE by Tom Rini · 8 years ago
  2. fa2f81b TI: Rework SRAM definitions and maximums by Tom Rini · 8 years ago
  3. 067716b ARM: Move SYS_CACHELINE_SIZE over to Kconfig by Tom Rini · 8 years ago
  4. 2489a7e omap3: Reduce logic/overo SPL max image size by Tom Rini · 8 years ago
  5. 89cb2b5 configs: Re-sync with cmd/Kconfig by Tom Rini · 8 years ago
  6. 78d1e1d configs: Re-sync almost all of cmd/Kconfig by Tom Rini · 8 years ago
  7. e0bed6b configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST by Igor Grinberg · 9 years ago
  8. 181bd9d kconfig: add config option for shell prompt by Nikita Kiryanov · 9 years ago
  9. 55f1b39 ti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT by Stefano Babic · 9 years ago
  10. 1584e4f Update the rootfs type to ext4 for Overo and Pepper by Adam YH Lee · 9 years ago
  11. ef0f2f5 Move defaults from config_cmd_default.h to Kconfig by Joe Hershberger · 9 years ago
  12. 88d8966 omap3: overo: Allow boot with kernel in UBI rootfs by Ash Charles · 9 years ago
  13. ce170a1 omap3: overo: Use software BCH8 ECC for NAND by Ash Charles · 9 years ago
  14. f5c30c1 omap3: overo: Add usb host support by Stefan Herbrechtsmeier · 10 years ago
  15. f2565a5 omap3: overo: Call bootm only after successful nand read by Stefan Herbrechtsmeier · 10 years ago
  16. 115e71f omap3: overo: Fix fdtfile test by Stefan Herbrechtsmeier · 10 years ago
  17. 434f2cf ARM: omap: move board specific NAND configs out from ti_armv7_common.h by pekon gupta · 10 years ago
  18. 222a311 ARM: omap: clean redundant PISMO_xx macros used in OMAP3 by pekon gupta · 10 years ago
  19. 12cc543 omap3: overo: Select fdtfile for expansion board by Ash Charles · 10 years ago
  20. b80a660 mtd: nand: omap: add CONFIG_SYS_NAND_BUSWIDTH_16BIT to indicate NAND device bus-width by pekon gupta · 10 years ago
  21. 29cc1d8 omap3: overo: Use common configurations for Overo by Ash Charles · 10 years ago
  22. 3c92c32 Allow overo to boot with device tree by Ash Charles · 10 years ago
  23. 06ae2b0 arm: omap3: Fix omap3_overo SPL boot hangup by Ash Charles · 10 years ago
  24. bcb2cf1 OMAP3: overo: eliminate hard-coded partition offsets by Ash Charles · 10 years ago
  25. e5c809d OMAP3: overo: increase linux partition to 8 MiB by Peter A. Bigot · 10 years ago
  26. dbba3da OMAP3: overo: add command support for mtd and ubi by Ash Charles · 10 years ago
  27. 0b3fde1 omap: overo: allow the use of a plain text env file instead boot scripts by Ash Charles · 10 years ago
  28. a7e36fc mtd: nand: omap: remove unused #defines from common omap_gpmc.h by pekon gupta · 11 years ago
  29. faca8ff Merge branch 'master' of git://git.denx.de/u-boot-nand-flash by Tom Rini · 11 years ago
  30. 3f71906 mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme by pekon gupta · 11 years ago
  31. 6789e84 i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework by Heiko Schocher · 11 years ago
  32. f232950 config: remove platform CONFIG_SYS_HZ definition part 2/2 by Rob Herring · 11 years ago
  33. 806d279 ARM: OMAP: Add CONFIG_OMAP_COMMON by Lokesh Vutla · 11 years ago
  34. 1a45966 Add GPL-2.0+ SPDX-License-Identifier to source files by Wolfgang Denk · 11 years ago
  35. 6f2f01b spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. by Scott Wood · 12 years ago
  36. 6696811 configs: Fix usage of mmc rescan by Andrew Bradford · 12 years ago
  37. 47f7bca SPL: Move the omap SPL framework to common/spl by Tom Rini · 12 years ago
  38. 3d6ba91 ARM: Remove unused stack and irq config defines by Rob Herring · 12 years ago
  39. 308252a dm: Move OMAP GPIO driver to drivers/gpio/ by Marek Vasut · 12 years ago
  40. 16e41c8 dm: Select CONFIG_SPL_GPIO_SUPPORT on OMAP by Marek Vasut · 12 years ago
  41. 219f478 hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c by Tom Rini · 12 years ago
  42. 49175c4 ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT by Tom Rini · 12 years ago
  43. e0820cc ARM: omap3: Set SPL stack size to 8KB, image to 54KB. by Tom Rini · 12 years ago
  44. 512dce09 OMAP3: Remove unused CONFIG_SYS_NAND_ECCSTEPS/TOTAL by Thomas Weber · 13 years ago
  45. 137703b overo: add SPL support by Andreas Müller · 13 years ago
  46. 0f8d3eb include/configs/omap3_overo.h: several cleanups by Andreas Müller · 13 years ago
  47. 1378cac OMAP3: Remove unused define CONFIG_OMAP3_*_DDR by Thomas Weber · 13 years ago
  48. 254973e omap: overo: Use ubifs instead of jffs2 for nand by Steve Sakoman · 13 years ago
  49. 81dcf8b ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused by Thomas Weber · 13 years ago
  50. 0997561 ARM: OMAP3: Remove unused define SDRC_R_C_B by Thomas Weber · 13 years ago
  51. 8152c6f ARM: OMAP3: Remove unused define CONFIG_OMAP3430 by Thomas Weber · 13 years ago
  52. 8e40852 omap: fix cache line size for omap3/omap4 boards by Aneesh V · 13 years ago
  53. e6847db OMAP3: overo : Add environment variable optargs to bootargs by Philip Balister · 13 years ago
  54. 75b988a OMAP3: overo : Use ttyO2 instead of ttyS2. by Philip Balister · 13 years ago
  55. 31a4f1e board configs: drop NET_MULTI references by Mike Frysinger · 13 years ago
  56. 2490e59 OMAP: Remove omapfb.debug=y from Beagle and Overo env settings by Steve Sakoman · 14 years ago
  57. f62b125 OMAP3/4: Increase console I/O buffer size by Vaibhav Hiremath · 13 years ago
  58. 75f980b Removed unused define, CONFIG_ARMV7. by Christopher Harvey · 13 years ago
  59. 2cc195e Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments by Michael Jones · 13 years ago
  60. 2fa8ca9 Add CONFIG_OF_LIBFDT to more boards. by Grant Likely · 13 years ago
  61. 6cbec7b ARMV7: OMAP3: Cleanup extern variables in mem.c by Luca Ceresoli · 13 years ago
  62. 8b6724a OMAP3: remove unused config macros by Grazvydas Ignotas · 14 years ago
  63. 31bfcf1 ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE by Steve Sakoman · 14 years ago
  64. d64b5b8 ARMV7: OMAP3: Add expansion board detection for Overo by Steve Sakoman · 14 years ago
  65. 25ddd1f Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value by Wolfgang Denk · 14 years ago
  66. 68b0fbf ARMV7: OMAP3: Enable cache support on Overo by Steve Sakoman · 14 years ago
  67. 4d7d7bc ARMV7: OMAP3: Implement relocation for Overo by Steve Sakoman · 14 years ago
  68. cd7c572 ARMV7: OMAP4: Use generic mmc driver on Overo by Steve Sakoman · 14 years ago
  69. 60c2317 ARMV7: OMAP3: Add CONFIG_SYS_NAND_QUIET_TEST to Beagle and Overo configs by Steve Sakoman · 14 years ago
  70. 5af3246 ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle by Steve Sakoman · 15 years ago
  71. f56348a ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7 by Steve Sakoman · 14 years ago
  72. cae377b omap3: Consolidate SDRC related operations by Vaibhav Hiremath · 14 years ago
  73. 632e1d9 OMAP3 Move declaration of gpmc_cfg. by Tom Rix · 15 years ago
  74. 1270ec1 Remove superfluous uses of V_PROMPT macro. by Robert P. J. Day · 15 years ago
  75. 4b142fe common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL by Heiko Schocher · 15 years ago
  76. 30563a0 OMAP3:SDRC: introduce DDR types by Nishanth Menon · 15 years ago
  77. 9c44ddc TI: OMAP3: Remove SZ_xx references by Sandeep Paulraj · 15 years ago
  78. 13d2cb9 OMAP3: Update Overo and Beagle environment by Steve Sakoman · 15 years ago
  79. df38262 TI: OMAP3: Overo Tobi ethernet support by Olof Johansson · 15 years ago
  80. 0297ec7 TI OMAP3 Use arm init sequence to initialize i2c by Tom Rix · 15 years ago
  81. 97a099e omap3: remove typedefs for configuration structs by Dirk Behme · 15 years ago
  82. 187af95 omap3: embedd gpmc_cs into gpmc config struct by Matthias Ludwig · 15 years ago
  83. 2c15513 OMAP3 Move twl4030 power and led functions by Tom Rix · 15 years ago
  84. 2eb99ca NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF... by Wolfgang Denk · 15 years ago
  85. d3a513c OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000 by Manikandan Pillai · 15 years ago
  86. 42bf4b2 OMAP3: Remove legacy NAND defines by Dirk Behme · 15 years ago
  87. 6a6b62e OMAP3: Use functions print_cpuinfo() and checkboard() by Sanjeev Premi · 15 years ago
  88. a85693b OMAP3: Fix changed mmc init command by Dirk Behme · 15 years ago
  89. 74de7ae Add "source" command; prepare removal of "autoscr" command by Wolfgang Denk · 15 years ago
  90. 81472d8 OMAP: rename timer divisor by Ladislav Michl · 15 years ago
  91. 488f5d8 Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ by Ladislav Michl · 16 years ago
  92. 9d0fc81 OMAP3: Add Overo board by Dirk Behme · 16 years ago