Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 711e5e26b41457e658155e7c225c9ccfed0182ef
  1. 711e5e2 cmd_mp: Add support for showing all CPU status by one command by Michal Simek · 9 years ago
  2. 80fd979 spi: zynq_spi: Simplify debug macro by Michal Simek · 9 years ago
  3. 260bdf0 zynq: Fix typo in Makefile about custom ps7_init file by Michal Simek · 9 years ago
  4. 4c8b7bf net: gem: Extend timeout value by Michal Simek · 12 years ago
  5. a0736ef zynqmp: Show EL level where U-Boot runs by Michal Simek · 9 years ago
  6. 6fe6f13 ARM: zynqmp: Wire up SATA for the board by Michal Simek · 9 years ago
  7. cb7ea82 ARM: zynqmp: Wire up ethernet controllers by Michal Simek · 9 years ago
  8. 6d6e3db ARM: zynq: Add support for zc770-xm011 by Michal Simek · 9 years ago
  9. 5c45b16 ARM: zynq: DT: Update zc770 dtses by Michal Simek · 9 years ago
  10. 91f9f17 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys by Michal Simek · 9 years ago
  11. d50cb3d ARM: zynq: DT: Add missing interrupt for L2 pl310 by Michal Simek · 9 years ago
  12. b4e9eaf ARM: zynq: DT: Get rid of ps-clk-frequency by Michal Simek · 9 years ago
  13. 05e7ca6 ARM: zynq: DT: Update years in copyright by Michal Simek · 9 years ago
  14. 999667c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel by Michal Simek · 9 years ago
  15. 461c388 ARM: zynq: DT: Add reference to bus node by Michal Simek · 9 years ago
  16. e913ce2 ARM: zynq: DT: Add pinctrl node by Michal Simek · 9 years ago
  17. 5ee236a ARM: zynq: DT: Cleanup address-cells and size-cells by Michal Simek · 9 years ago
  18. b346bd1 ARM: zynq: DT: Clean up timer device tree nodes by Michal Simek · 9 years ago
  19. 7e16336 ARM: zynq: DT: Use the zynq binding with macb by Michal Simek · 9 years ago
  20. 08305fe ARM: zynq: DT: Fix GEM register area size by Michal Simek · 9 years ago
  21. 40b383f spi: Fix zynq SPI binding by Michal Simek · 9 years ago
  22. 3ffcdc7 ARM: zynq: DT: Remove 222 MHz OPP by Michal Simek · 9 years ago
  23. 8a8c46a ARM: zynq: DT: Migrate UART to Cadence binding by Michal Simek · 9 years ago
  24. bece06c ARM: zynq: DT: Add a fixed regulator for CPU voltage by Michal Simek · 9 years ago
  25. fb1a506 ARM: zynq: DT: Add missing nodes to DTSI by Michal Simek · 9 years ago
  26. a0cb47f ARM: zynq: DT: Use the right names for nodes by Michal Simek · 9 years ago
  27. 225bf9a zynqmp: Add support for IP detection via SLCR by Michal Simek · 9 years ago
  28. fb10116 zynqmp: mp: Simplify set_r5_start handling by Michal Simek · 10 years ago
  29. b0d18be zynqmp: Provide option to enable uart dcc support for zynqmp by Siva Durga Prasad Paladugu · 9 years ago
  30. f994bdf Kconfig: zynqmp: Move CONFIG_SYS_TEXT_BASE to defconfig by Siva Durga Prasad Paladugu · 9 years ago
  31. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 9 years ago
  32. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 9 years ago
  33. e65d33c zynq: gem: Setting up WRAP bit for one TX bd by Michal Simek · 10 years ago
  34. eda9d30 zynq: gem: Increase the Rx buffer descriptors to 32 by Siva Durga Prasad Paladugu · 10 years ago
  35. 96f4f14 zynqmp: gem: Flush the rx buffers while transmitting by Siva Durga Prasad Paladugu · 10 years ago
  36. 8a584c8 zynqmp: gem: Set data bus width to 64bit for arm64 by Siva Durga Prasad Paladugu · 10 years ago
  37. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  38. 7f7409b sunxi: Enable both ehci and otg in host mode on various boards by Hans de Goede · 9 years ago
  39. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  40. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  41. 56a2085 sunxi: musb: Improve output during probing by Hans de Goede · 9 years ago
  42. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  43. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  44. 71cbe0d sunxi: musb: Add id pin support by Hans de Goede · 9 years ago
  45. b41972e sunxi: musb: Move vbus check to sunxi_musb_enable by Hans de Goede · 9 years ago
  46. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  47. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  48. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  49. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  50. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  51. 58d6d13 usb: ci_udc: fix request allocation when endpoints are disabled by Rob Herring · 9 years ago
  52. bf5b9b1 sunxi: spl: Remove redundant check from `board_mmc_init` for signature by Daniel Kochmański · 10 years ago
  53. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 10 years ago
  54. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 10 years ago
  55. 1b26bab mmc: Protect `mmc_initialize` from initialising mmc multiple times by Daniel Kochmański · 10 years ago
  56. 5a9749e arm: marvell: Increase MAXARGS to 32 by Stefan Roese · 9 years ago
  57. 7853c50 arm: mvebu: db-88f6820-gp: Add SDIO/MMC SPL boot support by Stefan Roese · 9 years ago
  58. 4bfcc54 spl: spl_mmc: Add option to boot from a MMC partition with offset by Stefan Roese · 9 years ago
  59. 7ddf8cf kwbimage: Rename CONFIG_SYS_SPI_U_BOOT_OFFS to CONFIG_SYS_U_BOOT_OFFS by Stefan Roese · 9 years ago
  60. 1bbe63c kwbimage: Add support for SDIO/MMC boot device selection by Stefan Roese · 9 years ago
  61. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  62. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  63. 62102be ARM: UniPhier: document reference support card by Masahiro Yamada · 9 years ago
  64. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  65. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  66. ad6670e ARM: UniPhier: update CONFIG_BOOTARGS by Masahiro Yamada · 9 years ago
  67. d259449 ARM: UniPhier: disable CONFIG_FIT by Masahiro Yamada · 9 years ago
  68. e037db0 ARM: UniPhier: add environment variable for TFTP boot by Masahiro Yamada · 9 years ago
  69. 421376a ARM: UniPhier: add environment sets for non-FIT Linux boot by Masahiro Yamada · 9 years ago
  70. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  71. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  72. 9e30b31 arm: mvebu: db-88f6820: Add SPL support with DDR init code by Stefan Roese · 10 years ago
  73. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  74. f1df936 arm: mvebu: Add Armada 38x DDR3 training code from Marvell bin_hdr by Stefan Roese · 10 years ago
  75. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  76. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 10 years ago
  77. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 10 years ago
  78. c25012b Makefile: Fix mvebu build target to use SPL load and exe-address by Stefan Roese · 10 years ago
  79. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 10 years ago
  80. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 10 years ago
  81. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 10 years ago
  82. 85a9ea3 ci_udc: fix 64-bit compile warnings by Stephen Warren · 9 years ago
  83. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  84. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  85. 6b9f9ea linux_compat: handle __GFP_ZERO in kmalloc() by Masahiro Yamada · 9 years ago
  86. ebc3328 linux_compat: move vzalloc() to header file as an inline function by Masahiro Yamada · 9 years ago
  87. 3721eaf linux_compat: remove cpu_relax() define by Masahiro Yamada · 9 years ago
  88. 5f7e310 x86: delete unneeded declarations of disable_irq() and enable_irq() by Masahiro Yamada · 9 years ago
  89. 82b9143 usb: ehci-marvell: Drop wrl accessor function by Stefan Roese · 9 years ago
  90. a588d99 usb: CONFIG_USB_FASTBOOT prefix replacement for consistency by Paul Kocialkowski · 9 years ago
  91. d00bf78 implement Fastboot via USB OTG on bcm28155_ap boards by Jiandong Zheng · 9 years ago
  92. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  93. 05a950c g_dnl: add missing declaration by Steve Rae · 9 years ago
  94. bc9071c usb: gadget: fastboot: Dequeue the previous IN request for the current request by Paul Kocialkowski · 9 years ago
  95. 94b385f usb: gadget: fastboot: Request status and length check in rx handler by Paul Kocialkowski · 9 years ago
  96. eca76b7 fastboot: Dynamic controller index for usb_gadget_handle_interrupts by Paul Kocialkowski · 10 years ago
  97. 99fc222 usb: gadget: Weak board_usb_init/cleanup definitions in USB download gadget code by Paul Kocialkowski · 9 years ago
  98. 8d2f003 usb: board_usb_init and board_usb_cleanup calls in the fastboot command by Paul Kocialkowski · 9 years ago
  99. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  100. 01acd6a usb: USB download gadget and functions config options coherent naming by Paul Kocialkowski · 9 years ago