Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 713a02a2ce46199c83c3cee0bd02f99dadaa4c8a
  1. 30ed1d4 efi_driver: debug output efi_uc_start, efi_uc_stop by Heinrich Schuchardt · 4 years, 10 months ago
  2. d743104 efi_driver: fix efi_uc_stop() by Heinrich Schuchardt · 4 years, 11 months ago
  3. 1064f2e efi_selftest: enable CONFIG_CMD_POWEROFF by Heinrich Schuchardt · 4 years, 10 months ago
  4. 55111c5 efi_loader: describe returning of control by Heinrich Schuchardt · 4 years, 10 months ago
  5. d417b94 efi_loader: document functions in efi_rng.c by Heinrich Schuchardt · 4 years, 11 months ago
  6. 8d9c076 imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK by Giulio Benetti · 4 years, 10 months ago
  7. 77eb9a9 imx: Add basic support for the NXP IMXRT10xx SoC family by Giulio Benetti · 4 years, 10 months ago
  8. 6a63a87 mmc: fsl_esdhc: add compatible for fsl, imxrt-usdhc by Giulio Benetti · 4 years, 10 months ago
  9. a820bed mmc: fsl_esdhc: make if(CONFIG_IS_ENABLED(CLK)) an #if statement by Giulio Benetti · 4 years, 10 months ago
  10. cd647fc ram: add SDRAM driver for i.MXRT SoCs by Giulio Benetti · 4 years, 10 months ago
  11. c32449a serial_lpuart: add support for i.MXRT by Giulio Benetti · 4 years, 10 months ago
  12. 55631db serial_lpuart: add clock enable if CONFIG_CLK is defined by Giulio Benetti · 4 years, 10 months ago
  13. e12b737 ARM: dts: imxrt1050: add dtsi file by Giulio Benetti · 4 years, 10 months ago
  14. abd98e0 gpio: mxc_gpio: add support for i.MXRT1050 by Giulio Benetti · 4 years, 10 months ago
  15. 916ce98 pinctrl: add i.MXRT driver by Giulio Benetti · 4 years, 10 months ago
  16. 4ca28e9 clk: imx: add i.IMXRT1050 clk driver by Giulio Benetti · 4 years, 10 months ago
  17. 824c371 clk: imx: pfd: add set_rate() by Giulio Benetti · 4 years, 10 months ago
  18. efadf79 clk: imx: pllv3: add support for PLLV3_AV type by Giulio Benetti · 4 years, 10 months ago
  19. d0ceb93 clk: imx: pllv3: add PLLV3_SYS support by Giulio Benetti · 4 years, 10 months ago
  20. 9841fee clk: imx: pllv3: add set_rate() support by Giulio Benetti · 4 years, 10 months ago
  21. cbb2001 clk: imx: pllv3: add disable() support by Giulio Benetti · 4 years, 10 months ago
  22. f4b7094 clk: imx: pllv3: add enable() support by Giulio Benetti · 4 years, 10 months ago
  23. 4abd807 clk: imx: pllv3: set div_mask differently if PLLV3 is GENERIC or USB by Giulio Benetti · 4 years, 10 months ago
  24. 16faa59 clk: imx: pllv3: register PLLV3 GENERIC and USB as 2 different clocks by Giulio Benetti · 4 years, 10 months ago
  25. e403316 armv7m: cache: add mmu_set_region_dcache_behaviour() stub for compatibility by Giulio Benetti · 4 years, 10 months ago
  26. 1054344 spl: fix entry_point equal to load_addr by Giulio Benetti · 4 years, 10 months ago
  27. 85d89b9 imx: dts: imx8dx: add I2C IPG clock for bus 0 and 2 by Anatolij Gustschin · 4 years, 11 months ago
  28. f35237e clk: imx8qxp: extend to support getting I2C IPG clock by Anatolij Gustschin · 4 years, 11 months ago
  29. 80d37c7 ARM: dts: imx6ul-14x14-evk: Pass the "broken-cd" property by Fabio Estevam · 4 years, 11 months ago
  30. 29230f3 mmc: fsl_esdhc_imx: Handle the "broken-cd" property by Fabio Estevam · 4 years, 11 months ago
  31. bc9b065 pico-imx7d: Convert to DM_ETH by Joris Offouga · 4 years, 11 months ago
  32. e8f4788 pico-imx7d: Disable USB_ETHER support for bl33 defconfig by Joris Offouga · 4 years, 11 months ago
  33. bcc70bc mx6ul_14x14_evk: Fix SPL boot hang by Fabio Estevam · 4 years, 11 months ago
  34. 240ece4 imx: imx8qxp_mek: update README by Peng Fan · 4 years, 11 months ago
  35. 274a552 wandboard: Do not print error message when PMIC is absent by Fabio Estevam · 4 years, 11 months ago
  36. c3061ce imx8qxp_mek: Select CONFIG_NET_RANDOM_ETHADDR by Fabio Estevam · 4 years, 11 months ago
  37. eb79caf imx: add imx8x based deneb board by Anatolij Gustschin · 4 years, 11 months ago
  38. 7b5b934 imx: add imx8x capricorn giedi board by Anatolij Gustschin · 4 years, 11 months ago
  39. fddfe87 tegra: fdt: Add tegra186-u-boot.dtsi by Stephen Warren · 4 years, 11 months ago
  40. ddb55ff arm64: versal: Enable board_late_init calling by Michal Simek · 5 years ago
  41. d12c8cc ARM: dts: zynq: enablement of coresight topology by Zumeng Chen · 5 years ago
  42. b0f36d5 arm64: zynqmp: Sync gem clock nodes with mainline Linux by Michal Simek · 4 years, 11 months ago
  43. b94a3c2 arm64: zynqmp: Sync gpio-controller name location by Michal Simek · 4 years, 11 months ago
  44. ad967af arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property by Sudeep Holla · 6 years ago
  45. 85eeaae arm64: dts: zcu100-revC: Give wifi some time after power-on by Jan Kiszka · 6 years ago
  46. 096d7f5 arm64: dts: zynqmp: Fix node names which contain "_" by Michal Simek · 6 years ago
  47. 8e3501e arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string by Rob Herring · 6 years ago
  48. 32da535 arm64: zynqmp: Remove incorrect phy from DT for zcu102-revB up by Michal Simek · 4 years, 11 months ago
  49. 4ed9732 arm64: zynqmp: Add support for zcu1285 revA board by Michal Simek · 4 years, 11 months ago
  50. 8af4c4d net: zynq: Add a note about RX_BUF macro by Michal Simek · 6 years ago
  51. cecf7f4 arm64: zynqmp: Switch zcu100 revC to use firmware clock driver by Michal Simek · 4 years, 11 months ago
  52. 166fb46 zynqmp: dts: Cleanup no-1-8-v property from sdhci dt nodes by T Karthik Reddy · 5 years ago
  53. a81186f arm64: zynqmp: Add support for zcu208 by Michal Simek · 5 years ago
  54. 4cd8bf4 ARM: zynq: Add missing nand/smcc nodes by Michal Simek · 4 years, 11 months ago
  55. 3f9c239 firmware: Remove probe which is causing extra bind by Ashok Reddy Soma · 4 years, 11 months ago
  56. 268695d arm64: zynqmp: Correct the type of eeprom for zcu216 boards by Raviteja Narayanam · 5 years ago
  57. 50e45b7 arm64: zynqmp: Fix ina226 shunt resistor value by Michal Simek · 5 years ago
  58. 727b396 arm64: zynqmp: Move PANIC to Kconfig by Michal Simek · 5 years ago
  59. be1b6c3 arm64: zynqmp: Use zynqmp_virt platform by Michal Simek · 5 years ago
  60. dab3fa6 arm64: zynqmp: Add missing Kconfig options to zynqmp_virt platform by Michal Simek · 5 years ago
  61. 5b21d64 arm64: zynqmp: Add support for u-boot.itb generation with ATF by Michal Simek · 5 years ago
  62. 9c6bf17 test/py: hush_if_test: Add tests to cover octal/hex values by Michal Simek · 5 years ago
  63. 40128bb ARM: zynq: Remove unused QSPI and USB addresses by Michal Simek · 4 years, 11 months ago
  64. 2507ecf zynq: mtd: nand: Remove hardcoded base addresses by Ashok Reddy Soma · 5 years ago
  65. 45397a6 zynq: mtd: nand: Move zynq nand driver to driver model by Ashok Reddy Soma · 5 years ago
  66. c352f1e ARM: zynq: Add jtag distro boot support by T Karthik Reddy · 5 years ago
  67. 3b26c86 arm: zynqmp: Wire SPL/ATF handoff structure properly by Michal Simek · 5 years ago
  68. 5c03c99 spl: atf: Enable option to rewrite bl2_plat_get_bl31_params() by Michal Simek · 5 years ago
  69. 4d9b1af spi: Fix manual relocation calling more times by Ashok Reddy Soma · 5 years ago
  70. 312f2c5 arm: xilinx: Use device tree which can be passed on cmd line by Michal Simek · 5 years ago
  71. b4f8468 arm64: zynqmp: Fix return value of board_fit_config_name_match by Michal Simek · 5 years ago
  72. de79ca95 arm64: zynqmp: Add board_boot_order for MMC boot extension by Michal Simek · 5 years ago
  73. 594254e arm64: zynqmp: Fix symlinks to SC psu_init* files by Michal Simek · 5 years ago
  74. bc12dec arm64: zynqmp: Remove nand partition description from mini-nand by Michal Simek · 6 years ago
  75. 44e88ec arm64: zynqmp: Enable bind/unbind commands for all boards by Michal Simek · 5 years ago
  76. 47446a3 arm: zynq: Remove low level UART setting by Michal Simek · 5 years ago
  77. 84d2bbf arm64: zynqmp: Remove low level UART setting by Michal Simek · 5 years ago
  78. e82024d arm64: zynqmp: Do not assing MIO34 that early on zcu100 by Michal Simek · 5 years ago
  79. fc274a5 arm64: zynqmp: Add support for OF_SEPARATE with board DTB by Michal Simek · 5 years ago
  80. db5b253 arm64: zynqmp: Rename fw_dtb variable to fdt_blob by Michal Simek · 5 years ago
  81. f071cda arm64: Enable INIT_SP_RELATIVE by default when POC is enabled by Michal Simek · 5 years ago
  82. 724caab arm64: zynqmp: Do not call bss init and board_init_r from board_init_f by Michal Simek · 5 years ago
  83. 935568e spl: atf: Add missing ndepth initialization by Michal Simek · 5 years ago
  84. 53c69de board: xilinx: Add support for user configurable boot script offset by T Karthik Reddy · 5 years ago
  85. 18be60b arm64: zynqmp: Fix emmc boot mode boot_target sequence by T Karthik Reddy · 5 years ago
  86. 7c5b7bb arm64: versal: Fix emmc boot mode boot_target issue by T Karthik Reddy · 5 years ago
  87. 3dd0f8c mtd: nand: Remove hardcoded base address of nand by Ashok Reddy Soma · 5 years ago
  88. b014b83 mtd: nand: Move arasan nand driver to driver model by Ashok Reddy Soma · 5 years ago
  89. 88366b9 travis: Switch to QEMU v4.2.0 globally by Tom Rini · 4 years, 10 months ago
  90. 12183df gitlab/azure: Update to latest container by Tom Rini · 4 years, 10 months ago
  91. ef2f0d3 Merge branch '2020-01-10-master-imports' by Tom Rini · 4 years, 10 months ago
  92. 4f731c7 cmd: adtimg: Refactor usage style by Eugeniu Rosca · 5 years ago
  93. 4c6edc2 cmd: adtimg: Rename internal symbols by Eugeniu Rosca · 5 years ago
  94. b84acf1 dtimg/am57xx_evm_defconfig: Rename dtimg to adtimg by Eugeniu Rosca · 5 years ago
  95. 27a38a6 virtio: fix typo devicd by Heinrich Schuchardt · 5 years ago
  96. 41acbc5 arm: cpu: armv8: add support for arm psci reset2. by Rajesh Ravi · 5 years ago
  97. 0bc4356 arch: arm: Program GIC LPI configuration table by Bharat Kumar Reddy Gooty · 5 years ago
  98. 5819466 mkimage: simplify fit_check_params() by Heinrich Schuchardt · 5 years ago
  99. 6478a7e cmd/eeprom.c: prepend 0x to hex numbers in output message format by Klaus H. Sorensen · 5 years ago
  100. 3f05f08 test/cmd_ut.c: fix cmd_ut_category by Philippe Reynes · 4 years, 11 months ago