- 6815a66 am33xx: musb: Remove unused configuration logic by Tom Rini · 2 years, 8 months ago
- 77f46f0 video: fsl: colibri_vf: Drop FSL DCU driver by Simon Glass · 2 years, 10 months ago
- 1fa43ca video: Drop references to CONFIG_VIDEO et al by Simon Glass · 2 years, 10 months ago
- fff49e0 video: Drop video_fb header by Simon Glass · 2 years, 10 months ago
- 9b39da6 video: nexell: Drop unused and invalid code by Simon Glass · 2 years, 10 months ago
- 34d2b7f Merge tag 'v2022.04-rc5' into next by Tom Rini · 2 years, 8 months ago
- 8b9c770 arm: apple: Fix mem layout by Mark Kettenis · 2 years, 8 months ago
- 66899c8 arm: apple: Increase RTKit timeout by Hector Martin · 2 years, 8 months ago
- 85da558 sunxi: dts: Update RGMII phy-mode properties by Andre Przywara · 2 years, 8 months ago
- e943753 sunxi: Fix old GMAC pinmux setup by Andre Przywara · 2 years, 8 months ago
- 5b66ebb ARM: dts: ast2600: Add PWM to device tree by Billy Tsai · 2 years, 8 months ago
- 73ee1f2 pinctrl: Add the pinctrl setting for PWM. by Billy Tsai · 2 years, 8 months ago
- 16199a8 Convert CONFIG_PHY_RESET_DELAY to Kconfig by Tom Rini · 2 years, 8 months ago
- 1d5686a Convert CONFIG_SYS_FAULT_ECHO_LINK_DOWN to Kconfig by Tom Rini · 2 years, 8 months ago
- 29cc2b5 Convert CONFIG_RESET_PHY_R to Kconfig by Tom Rini · 2 years, 8 months ago
- 5a606a4 Convert CONFIG_AT91_WANTS_COMMON_PHY to Kconfig by Tom Rini · 2 years, 8 months ago
- 8285b92 arm: a37xx: espressobin: Fix non-working SPI by Pali Rohár · 2 years, 8 months ago
- 3789b6a arm: mvebu: dts: turris_mox: fix non-working USB port by Marek Behún · 2 years, 8 months ago
- cb81640 Convert CONFIG_ATMEL_LEGACY to Kconfig by Tom Rini · 2 years, 8 months ago
- 5644f3b Convert CONFIG_AT91_GPIO_PULLUP to Kconfig by Tom Rini · 2 years, 8 months ago
- 675e703 Convert CONFIG_AT91SAM9260 et al to Kconfig by Tom Rini · 2 years, 8 months ago
- ae3f467 Convert CONFIG_AM335X_USB0 et al to Kconfig by Tom Rini · 2 years, 8 months ago
- 01d1b99 Convert CONFIG_NET_RETRY_COUNT to Kconfig by Tom Rini · 2 years, 8 months ago
- 5d4e863 Convert CONFIG_ARP_TIMEOUT to Kconfig by Tom Rini · 2 years, 8 months ago
- b53a280 Convert CONFIG_ARMV8_SWITCH_TO_EL1 to Kconfig by Tom Rini · 2 years, 8 months ago
- 0da35fa Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig by Tom Rini · 2 years, 8 months ago
- b42297b rockchip: Set default LNX_KRNL_IMG_TEXT_OFFSET_BASE to SYS_TEXT_BASE by Alper Nebi Yasak · 2 years, 10 months ago
- 6d36e92 rockchip: rk3399: Add support for chromebook_kevin by Marty E. Plummer · 2 years, 11 months ago
- 8ba1ade rockchip: gru: Add more devicetree settings by Simon Glass · 2 years, 11 months ago
- 297e6eb Merge tag 'xilinx-for-v2022.07-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next by Tom Rini · 2 years, 8 months ago
- 0ac03fb arm64: zynqmp: Add pinctrl emmc description to SM-K26 by Michal Simek · 2 years, 8 months ago
- f5ac18f Merge https://source.denx.de/u-boot/custodians/u-boot-marvell by Tom Rini · 2 years, 8 months ago
- 351729c arm: mvebu: dts: turris_mox: fix non-working network / MDIO by Marek Behún · 2 years, 8 months ago
- 19fbe10 ARM: dts: stm32: Add DFU support for DHCOM recovery by Marek Vasut · 2 years, 8 months ago
- b491053 stm32mp: psci: Implement PSCI system suspend and DRAM SSR by Marek Vasut · 2 years, 9 months ago
- 9a8996d ARM: dts: stm32: Move vdd_io extras into Avenger96 extras by Marek Vasut · 2 years, 9 months ago
- 27f6c65 ARM: dts: stm32: Add USB OTG pinctrl and regulator nodes into SPL DT on DHCOR by Marek Vasut · 2 years, 10 months ago
- 182738f arm: dts: stm32mp15: alignment with v5.17 by Patrick Delaunay · 2 years, 9 months ago
- 2d48d99 stm32mp1: bsec: add missing dev in function comment by Patrick Delaunay · 2 years, 9 months ago
- 0c20f53 stm32mp: bsec: add permanent lock write support by Patrick Delaunay · 2 years, 9 months ago
- 2abf048 Merge tag 'v2022.04-rc4' into next by Tom Rini · 2 years, 8 months ago
- e5d8d08 arm64: zynqmp: Fix i2c addresses for zynqmp-p-a2197 by Michal Simek · 2 years, 8 months ago
- 037bb6e arm: a37xx: Remap IO space to bus address 0x0 by Pali Rohár · 2 years, 8 months ago
- 6d35c24 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-spi by Tom Rini · 2 years, 8 months ago
- b9d0f00 arm: add initial support for the Phytium Pomelo Board by weichangzheng · 2 years, 8 months ago
- 901ff69 ARM: mach-omap2: omap3: Make clock functions static by Adam Ford · 2 years, 8 months ago
- 72ce781 ARM: dts: am3517-evm: Sync DTS with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- 08ff17d ARM: dts: logicpd-torpedo: Resyc DTS files with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- d0331d4 ARM: dts: logicpd-som-lv: Resync DTS files with Linux 5.17-rc5 by Adam Ford · 2 years, 9 months ago
- 7fe32b3 event: Convert arch_cpu_init_dm() to use events by Simon Glass · 2 years, 8 months ago
- 81a46c1 sunxi: Kconfig: Fix up SPI configuration by Andre Przywara · 2 years, 10 months ago
- 9fb9ec5 arm64: zynqmp: add support for zcu106 rev1.0 by Neal Frager · 2 years, 8 months ago
- 7da8754 ARM: dts: ast2500: Add ngpios property to GPIO node by Andrew Jeffery · 2 years, 9 months ago
- 4a9099e arm: dts: Add DTS description for MMC2 am33xx devices by Lukasz Majewski · 2 years, 9 months ago
- ab9e48f arm: dts: Add mmc[01] aliases to am33xx.dtsi by Lukasz Majewski · 2 years, 9 months ago
- 3bf5e43 arch: arm: dts: bcm96753ref: enable led support by Philippe Reynes · 2 years, 9 months ago
- 66425ca arch: arm: dts: bcm6753: add led support by Philippe Reynes · 2 years, 9 months ago
- a241ccd bcm96753ref: add initial support by Philippe Reynes · 2 years, 9 months ago
- 1d5555f bcm6753: add initial support by Philippe Reynes · 2 years, 9 months ago
- 2f6e1dd arm64: zynqmp: Fix level of gpio reset for usb on kv260 boards by Michal Simek · 2 years, 9 months ago
- 8b82a3a arm64: zynqmp: Enable DP driver for SOMs by Michal Simek · 2 years, 9 months ago
- ff79448 arm64: zynqmp: Switch to ethernet-phy-id in kv260 by Michal Simek · 2 years, 9 months ago
- a3efa53 arm64: zynqmp: Use assigned-clock-rates for setting up clock in SOM by Michal Simek · 2 years, 9 months ago
- 59e1bdd arm64: zynqmp: Setup clock for DP and DPDMA by Michal Simek · 2 years, 9 months ago
- c36dc24 arm64: zynqmp: Move usb hub from i2c to usb node by Michal Simek · 2 years, 9 months ago
- 03a8e82 ARM: dts: zynq: add NAND flash controller node by Michael Walle · 2 years, 9 months ago
- 6d3c46e Merge https://source.denx.de/u-boot/custodians/u-boot-sunxi by Tom Rini · 2 years, 8 months ago
- 39834cc arm: dts: iot2050: Add cfg register space for ringacc and udmap by Jan Kiszka · 2 years, 9 months ago
- f7fbe54 arm: mach-k3: am6_init: Use CONFIG_TI_I2C_BOARD_DETECT by Christian Gmeiner · 2 years, 9 months ago
- 1fd5425 arm: a37xx: pci: Fix a3700_fdt_fix_pcie_regions() function again by Pali Rohár · 2 years, 9 months ago
- f9147d6 Convert CONFIG_CHIP_SELECTS_PER_CTRL to Kconfig by Tom Rini · 2 years, 9 months ago
- 6d21dd3 Convert CONFIG_BOARD_POSTCLK_INIT to Kconfig by Tom Rini · 2 years, 9 months ago
- da8592d Convert CONFIG_BOARD_ECC_SUPPORT to Kconfig by Tom Rini · 2 years, 9 months ago
- a7e6c6b Convert CONFIG_BOARD_COMMON to Kconfig by Tom Rini · 2 years, 9 months ago
- 43ea564 arm: exynos: Move BL1/2 SPI flash defines to their user, drop CONFIG by Tom Rini · 2 years, 9 months ago
- d274f92 Merge tag 'u-boot-at91-fixes-2022.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 by Tom Rini · 2 years, 8 months ago
- 705b584 Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq by Tom Rini · 2 years, 8 months ago
- c21f3d4 sunxi: f1c100s: Fix FEL registers restore by Andre Przywara · 2 years, 9 months ago
- 640f2f3 mach-sunxi: Enable SPI boot for SUNIV and licheepi nano by Jesse Taube · 2 years, 9 months ago
- 0dcdaff mach-sunxi: Add SPL SPI boot for SUNIV by Jesse Taube · 2 years, 9 months ago
- a08b04b mach-sunxi: Add boot device detection for SUNIV/F1C100s by Jesse Taube · 2 years, 9 months ago
- 5ff4857 armv8: Fix and simplify branch_if_master/branch_if_slave by Andre Przywara · 2 years, 9 months ago
- f660fe0 armv8: Simplify switch_el macro by Andre Przywara · 2 years, 9 months ago
- 7ab2e47 arm: Clean up asm/io.h by Andre Przywara · 2 years, 9 months ago
- 7ed340a armv8: Force SP_ELx stack pointer usage by Andre Przywara · 2 years, 9 months ago
- 6c7691e armv8: Always unmask SErrors by Andre Przywara · 2 years, 9 months ago
- 6fb4f73 arm: apple: Switch to fully dynamic mem layout by Janne Grunau · 2 years, 9 months ago
- 554a853 board: sl28: use fit image generator by Michael Walle · 2 years, 9 months ago
- 0935dbf usb: ehci-omap: Drop dead code by Adam Ford · 2 years, 9 months ago
- 17a0dc6 Merge branch '2022-02-21-platform-updates' by Tom Rini · 2 years, 9 months ago
- 5d90836 arm: dts: k3-j7200: Fix up MAIN R5FSS cluster mode back to Split-mode by Suman Anna · 2 years, 9 months ago
- 68a51cc arm: omap3: Make some memory functions static and clean headers by Adam Ford · 2 years, 9 months ago
- 1c6ea4d arm: omap3: Cleanup sys_info to fit OMAP3 booting with LTO by Adam Ford · 2 years, 9 months ago
- da6a8d9 arm: dts: k3-j721e-r5-common-proc-board: tps659413: Correct the min/max voltages of VDD_CPU by Keerthy · 2 years, 9 months ago
- a89fea7 arm: apple: Add M1 Pro/Max support by Mark Kettenis · 2 years, 9 months ago
- 24b628a Merge tag 'xilinx-for-v2022.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze by Tom Rini · 2 years, 9 months ago
- 9bd4232 arm64: zynqmp: Remove additional gpio header from dlc21 by Michal Simek · 2 years, 9 months ago
- 11381fb arm64: zynqmp: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 05f0f26 ARM: zynq: Fix debug uart initialization by Michal Simek · 2 years, 9 months ago
- 83d2941 arm64: zynqmp: Fix dependencies around ZYNQMP_PSU_INIT_ENABLED by Michal Simek · 2 years, 9 months ago