1. d73d5ae imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL by Peng Fan · 9 years ago
  2. bc32fc6 imx: mx6ul: Update imx registers head file by Peng Fan · 9 years ago
  3. 0ca5402 imx: mx6ul: Add pins IOMUX head file by Peng Fan · 9 years ago
  4. 8631c06 imx: mx6ul: Add i.MX6UL CPU type by Peng Fan · 9 years ago
  5. 09a0969 arm: mx6: kconfig: don't select CPU_V7 per board by Nikita Kiryanov · 9 years ago
  6. 81f5598 arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6 by Nikita Kiryanov · 9 years ago
  7. 8d779461 imx: mx6qp Enable PRG clock for IPU by Peng Fan · 9 years ago
  8. ec0f953 imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP by Ye.Li · 9 years ago
  9. e1c2d68 imx: mx6: ccm: Change the clock settings for i.MX6QP by Peng Fan · 9 years ago
  10. d0acd99 imx: add cpu type for i.MX6QP/DP by Peng Fan · 9 years ago
  11. dad17fd armv8: caches: Added routine to set non cacheable region by Siva Durga Prasad Paladugu · 9 years ago
  12. cc35734 Merge branch 'master' of git://git.denx.de/u-boot-tegra by Tom Rini · 9 years ago
  13. 873e3ef T210: Add support for 64-bit T210-based P2571 board by Tom Warren · 10 years ago
  14. 3cee35f P2571: dts: Add DT file for Tegra210 P2571 board by Tom Warren · 10 years ago
  15. 7aaa5a6 ARM: Tegra210: Add support to common Tegra source/config files by Tom Warren · 10 years ago
  16. 6c43f6c ARM: Tegra210: Add SoC code/include files for T210 by Tom Warren · 10 years ago
  17. 56079ec Tegra: Rework KConfig options to allow 64-bit builds (T210) by Tom Warren · 9 years ago
  18. 659a075 Tegra210: Fix 64-bit build warning about save_boot_params_ret() by Tom Warren · 9 years ago
  19. aa44187 ARM: tegra: Initialize timer earlier by Thierry Reding · 9 years ago
  20. 32b3234 ARM: tegra: Use standard cache enable for 64-bit by Thierry Reding · 9 years ago
  21. 00f782a ARM: tegra: Restrict usable RAM to 32-bit on 64-bit SoCs by Thierry Reding · 9 years ago
  22. 8b19dff armv8/cache: Fix page table creation by Thierry Reding · 9 years ago
  23. 66d10c1 Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze by Tom Rini · 9 years ago
  24. 6fe6f13 ARM: zynqmp: Wire up SATA for the board by Michal Simek · 9 years ago
  25. cb7ea82 ARM: zynqmp: Wire up ethernet controllers by Michal Simek · 9 years ago
  26. 6d6e3db ARM: zynq: Add support for zc770-xm011 by Michal Simek · 9 years ago
  27. 5c45b16 ARM: zynq: DT: Update zc770 dtses by Michal Simek · 9 years ago
  28. 91f9f17 ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys by Michal Simek · 9 years ago
  29. d50cb3d ARM: zynq: DT: Add missing interrupt for L2 pl310 by Michal Simek · 9 years ago
  30. b4e9eaf ARM: zynq: DT: Get rid of ps-clk-frequency by Michal Simek · 9 years ago
  31. 05e7ca6 ARM: zynq: DT: Update years in copyright by Michal Simek · 9 years ago
  32. 999667c ARM: zynq: DT: Sync zc702/zc706/zed/zybo DT with kernel by Michal Simek · 9 years ago
  33. 461c388 ARM: zynq: DT: Add reference to bus node by Michal Simek · 9 years ago
  34. e913ce2 ARM: zynq: DT: Add pinctrl node by Michal Simek · 9 years ago
  35. 5ee236a ARM: zynq: DT: Cleanup address-cells and size-cells by Michal Simek · 9 years ago
  36. b346bd1 ARM: zynq: DT: Clean up timer device tree nodes by Michal Simek · 9 years ago
  37. 7e16336 ARM: zynq: DT: Use the zynq binding with macb by Michal Simek · 9 years ago
  38. 08305fe ARM: zynq: DT: Fix GEM register area size by Michal Simek · 9 years ago
  39. 40b383f spi: Fix zynq SPI binding by Michal Simek · 9 years ago
  40. 3ffcdc7 ARM: zynq: DT: Remove 222 MHz OPP by Michal Simek · 9 years ago
  41. 8a8c46a ARM: zynq: DT: Migrate UART to Cadence binding by Michal Simek · 9 years ago
  42. bece06c ARM: zynq: DT: Add a fixed regulator for CPU voltage by Michal Simek · 9 years ago
  43. fb1a506 ARM: zynq: DT: Add missing nodes to DTSI by Michal Simek · 9 years ago
  44. a0cb47f ARM: zynq: DT: Use the right names for nodes by Michal Simek · 9 years ago
  45. 225bf9a zynqmp: Add support for IP detection via SLCR by Michal Simek · 9 years ago
  46. fb10116 zynqmp: mp: Simplify set_r5_start handling by Michal Simek · 9 years ago
  47. 0b54a9d zynqmp: Define ep config for ZynqMP by Siva Durga Prasad Paladugu · 9 years ago
  48. 7558000 zynqmp: Kconfig: Move zynqmp Kconfig by Siva Durga Prasad Paladugu · 9 years ago
  49. 502a2af arm64: Handle arbitrary CONFIG_SYS_MALLOC_F_LEN values by Thierry Reding · 9 years ago
  50. f49357b ARM: tegra: Build warning fixes for 64-bit by Thierry Reding · 9 years ago
  51. 537e967 tegra124: Implement spl_was_boot_source() by Simon Glass · 9 years ago
  52. fffde77 stm32f4: add cpu clock option for 180 MHz by Antonio Borneo · 9 years ago
  53. 089fddf stm32f429: pass the device unique ID in DTB by Antonio Borneo · 9 years ago
  54. b0c8f4a Kill unneeded #include <linux/kconfig.h> by Masahiro Yamada · 9 years ago
  55. bafa6f5 am33xx: Unused get_board_rev function removal by Paul Kocialkowski · 9 years ago
  56. fb9006c omap3: CONFIG_REVISION_TAG ifdef check for get_board_rev by Paul Kocialkowski · 9 years ago
  57. d1a04b3 omap5: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  58. 94fc751 omap4: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  59. cfac375 omap3: Definitions for SYS_BOOT-based fallback boot device selection by Paul Kocialkowski · 9 years ago
  60. ed19bda omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot by Paul Kocialkowski · 9 years ago
  61. df84477 omap-common: Boot device define instead of hardcoded value by Paul Kocialkowski · 9 years ago
  62. 62c5674 omap: SPL boot devices cleanup and completion by Paul Kocialkowski · 9 years ago
  63. 60c7c30 omap-common: Common boot code OMAP3 support and cleanup by Paul Kocialkowski · 9 years ago
  64. 17c5bda keystone2: add wfi in to the core_spin loop by Vitaly Andrianov · 9 years ago
  65. 2647394 Merge branch 'master' of http://git.denx.de/u-boot-sunxi by Tom Rini · 9 years ago
  66. a51c832 sunxi: ga10h: Enable both otg and regular usb host controllers by Hans de Goede · 9 years ago
  67. 9ecce97 sunxi: musb: Stop treating not having a vbus-det gpio as an error by Hans de Goede · 9 years ago
  68. 91183ba sunxi: musb: Use device-model for musb host mode by Hans de Goede · 9 years ago
  69. d42faf3 sunxi: musb: Move musb config and platdata to the sunxi-musb glue by Hans de Goede · 9 years ago
  70. 48c06c9 sunxi: usb-phy: Add support for reading otg id pin value by Hans de Goede · 9 years ago
  71. de1502c sunxi: Enable CMD_USB and USB_STORAGE by default on sunxi by Hans de Goede · 9 years ago
  72. 4536882 sunxi: Update selects in arch/arm/Kconfig for DM conversions by Tom Rini · 9 years ago
  73. d08980d sunxi: Remove bogus uart entry from utoo-p66 dts file by Hans de Goede · 9 years ago
  74. 6f4e050 Merge git://git.denx.de/u-boot-usb by Tom Rini · 9 years ago
  75. a151403 sunxi: spl: Detect at runtime where SPL was read from by Daniel Kochmański · 9 years ago
  76. 645c48f sunxi: Create helper function veryfing valid boot signature on MMC by Daniel Kochmański · 9 years ago
  77. 8ed43b9 arm: mvebu: Add SPL SDIO/MMC boot support by Stefan Roese · 9 years ago
  78. 413978d Merge git://git.denx.de/u-boot-uniphier by Tom Rini · 9 years ago
  79. f1d7945 ARM: dts: UniPhier: add I2C ch4 device node for PH1-sLD3 by Masahiro Yamada · 9 years ago
  80. 3365b4e ARM: UniPhier: add PH1-sLD3 SoC support by Masahiro Yamada · 9 years ago
  81. 6b71e6d ARM: dts: UniPhier: add device-specific compatible string for EEPROM by Masahiro Yamada · 9 years ago
  82. 3c9cc70 Merge git://git.denx.de/u-boot-marvell by Tom Rini · 9 years ago
  83. ad6ac7a arm: mvebu: a38x: Use correct PEX register access macros by Stefan Roese · 9 years ago
  84. ff9112d arm: mvebu: drivers/ddr: Move Armada XP DDR init code into new directory by Stefan Roese · 10 years ago
  85. edb4702 arm: mvebu: Add Armada 38x SERDES / PHY init code from Marvell bin_hdr by Stefan Roese · 9 years ago
  86. 29b103c arm: mvebu: serdes: Move Armada XP SERDES / PHY init code into new directory by Stefan Roese · 9 years ago
  87. 9f62b44 arm: mvebu: Disable MMU before changing register base address by Stefan Roese · 9 years ago
  88. e3cccf9 arm: mvebu: spl.c: Add call to board_early_init_f() by Stefan Roese · 9 years ago
  89. 2142770 arm: mvebu: Use default reg base address for SPL on A38x by Stefan Roese · 9 years ago
  90. ade741b arm: mvebu: Call timer_init early before PHY and DDR init by Stefan Roese · 9 years ago
  91. e863f7f arm: mvebu: add Armada XP SATA support by Anton Schubert · 9 years ago
  92. 854cbd2 usb: gadget: bcm_udc_otg files by Jiandong Zheng · 9 years ago
  93. 17da3c0 usb: Fastboot function config for better consistency with other functions by Paul Kocialkowski · 9 years ago
  94. 909a1ab include: usb: Move USB controller base address mapping by Nikhil Badola · 9 years ago
  95. d09e401 arch: arm: fsl: Add XHCI support for LS1021A by Ramneek Mehresh · 9 years ago
  96. 30db918 zynq: Rename struct clk_ops to zynq_clk_ops by Simon Glass · 9 years ago
  97. 4eae498 dm: arm: Put driver model I2C drivers before legacy ones by Simon Glass · 9 years ago
  98. fa78e0a dm: Reduce SPL device tree size by Simon Glass · 9 years ago
  99. db14f11 armv8/fsl-lsch3: Fix TCR_EL3 for the final MMU setup. by Zhichun Hua · 9 years ago
  100. 21a257b armv8: Fix TCR macros for shareability attribute by Zhichun Hua · 9 years ago